MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

The motorcycle archive Specifications

BRP Can Am Spyder Roadster SM5 (2008-09)

Entry updated

BRP Can Am Spyder Roadster SM5 (2008-09)

At a glance

Capacity
998 cc / 61 cu-in
Power
106 hp / 79 kW @ 8500 rpm
Torque
77 lb-ft / 104.3 Nm @ 6250 rpm
Seat height
737 mm / 29 in

The full picture.

The BRP Can Am Spyder Roadster SM5 was produced in 2008-2009 and featured a four-stroke, V-twin, 998cc engine with a capacity of 61 cubic inches. It had a liquid cooling system, 10.8:1 compression ratio, and a multi-point EFI with 57mm diameter throttle bodies. The bike had 106 horsepower at 8500 rpm and 77 lb-ft of torque at 6250 rpm. Its transmission was a Sequential Manual 5-Speed with transmission-based reverse, and the final drive was a belt. The front suspension was a double A-arm with anti-roll bar and 5.67 inches of front suspension travel, while the rear suspension was a swing-arm with monoshock and 5.71 inches of rear suspension travel. Its brakes were foot-actuated and fully integrated into a hydraulic 3-wheel braking system; the front brakes were 260mm discs with 4 piston calipers, and the rear brake was a single 260mm disc with a 2 piston caliper. The bike had a seat height of 737mm and a dry weight of 316 kg/697 lbs, with a fuel capacity of 25 liters/6.6 US gallons.


Technical specifications:

Make Model: BRP Can Am Spyder Roadster SM5

Motorcycle technical specifications
Year2008-09
EngineBRP-Rotax, Four stroke, V-Twin, DPHC, 4 valve per cylinder
Capacity998 cc / 61 cu-in
Bore x Stroke97 x 68 mm
Cooling SystemLiquid cooled
Compression Ratio10.8:1
InductionMulti-point EFI with 57 mm diameter throttle bodies
IgnitionElectronic ignition with dual output coil
StartingElectric
Exhaust2-into-1 with catalytic converter
Max Power106 hp / 79 kW @ 8500 rpm
Max Torque77 lb-ft / 104.3 Nm @ 6250 rpm
ClutchWet, multi-plate, manual or electronic operation through a hydraulic piston
TransmissionSequential Manual 5-Speed (SM5) with transmission-based reverse
Final DriveBelt
Front SuspensionDouble A-Arm with anti-roll bar, .5.67 in 144 mm front suspension travel. with adjustable cam
Rear SuspensionSwing-arm with monoshock, 5.71 in 145 mm with adjustable cam rear suspension travel.
BrakesFoot-actuated, fully integrated hydraulic 3-wheel braking system
Front Brakes260mm discs 4 piston caliper
Rear BrakesSingle 260mm disc 2 piston caliper
Front Tyre2x 165/65R14
Rear Tyre225/50R15
Seat Height737 mm / 29 in
Dry Weight.316 kg / 697 lbs
Fuel Capacity25 Litres / 6.6 US gal