The Suzuki RM250 Paul Edmondson Replica is a limited edition motorcycle, with only 50 units produced in 2007. It has a two-stroke, single cylinder engine with a capacity of 249cc and a compression ratio of 10.7:1 (ex valve closed). The bike has a liquid-cooled cooling system and Keihin PWK38PWJ/TPS induction, with an electronic CDI ignition and kick starting mechanism. The transmission is a 5-speed manual, and the final drive is a chain. The front and rear suspension are both Kayaba inverted cartridge and link-type respectively, and the bike has high-quality brakes with a single 250mm disc and two-piston caliper at the front and a single 240mm disc and one-piston caliper at the rear. The front tyre is 100/90-21, and the rear tyre is 110/90-18. The seat height is 965mm, and the fuel capacity is 8 litres. The bike has received positive reviews from MCN, Easier.com, and Motocorse.
Technical specifications:
Make Model: Suzuki RM250 Paul Edmondson Replica
| Year | 2007 |
|---|---|
| Production | 50 Units |
| Engine | Two stroke, single cylinder |
| Capacity | 249 cc / 15.2 cu in |
| Bore x Stroke | 66.4 x 72.0 mm |
| Compression Ratio | 10.7:1 (ex valve closed), 8.9:1 (ex valve open) |
| Cooling System | Liquid cooled |
| Induction | Keihin PWK38PWJ/TPS |
| Ignition | Electronic CDI |
| Starting | Kick |
| Transmission | 5 Speed |
| Final Drive | Chain |
| Clutch | Wet, multi-plate |
| Front Suspension | Kayaba inverted cartridge, 18 step rebound, 20-step compression damping adjustable |
| Front Wheel Travel | 300 mm / 11.8 in |
| Rear Suspension | Kayaba link-type, 18-step rebound, 3-turn high, 16-step low speed compression damping, preload adjustable |
| Rear Wheel Travel | 320 mm / 12.6 in |
| Front Brakes | Single 250 mm disc, 2 piston caliper |
| Rear Brakes | Single 240mm disc, 1 piston caliper |
| Front Tyre | 100/90 -21 |
| Rear Tyre | 110/90 -18 |
| Seat Height | 965 mm / 38 in |
| Fuel Capacity | 8.0 litres / 2.1 US gal / 1.8 Imp gal |
| Reviews | MCN / Easier.com / Motocorse |
