The Derbi Senda R 125 4T motorcycle was produced between 2004 and 2007. It has a four-stroke, single-cylinder engine with a capacity of 124cc and a compression ratio of 11.0:1. The bike has an electric start and can reach a maximum power of 9 kW / 12 hp at 6500 rpm and a maximum torque of 9 Nm / 6.6 lb-ft at 6500 rpm. The clutch is multiplate and the transmission is 5-speed. The final drive is done via a chain. The motorcycle has a front suspension featuring 41mm Paoli forks, while the rear suspension uses a Paoli monoshock. The Braking system has a single 260mm disc in the front and a single 220mm disc at the rear. The wheelbase of the bike stands at 1450 mm / 57.1 in and it has a dry weight of 118 kg / 269 lbs. The fuel capacity is 7.5 litres or 2.0 US gal. The bike can reach the top speed of 97.3 km/h and hit the standing-quarter mile in 12.4 seconds.
Technical specifications:
Make Model: Derbi Senda R 125 4T
| Year | 2004 – 07 |
|---|---|
| Engine | Four stroke, single cylinder. OHC |
| Capacity | 124 cc / 7.6 cu-in |
| Bore x Stroke | 56 x 49 mm |
| Cooling System | Air cooled |
| Compression Ratio | 11.0:1 |
| Induction | 22mm Keihin |
| Ignition | Electronic |
| Starting | Electric |
| Max Power | 9 kW / 12 hp @ 6500 rpm |
| Max Torque | 9 Nm / 6.6 lb-ft @ 6500 rpm |
| Clutch | Multiplate |
| Transmission | 5 Speed |
| Final Drive | Chain |
| Front Suspension | 41mm Paoli forks |
| Front Wheel Travel | 195 mm / 7.6 in |
| Rear Suspension | Paoli monoshock |
| Rear Wheel Travel | 170 mm / 6.7 in |
| Front Brakes | Single 260mm disc |
| Rear Brakes | Single 220mm disc |
| Front Tyre | 80/90 -21 |
| Rear Tyre | 180/80 -18 |
| Wheelbase | 1450 mm / 57.1 in |
| Dry Weight | 118 kg / 269 lbs |
| Fuel Capacity | 7.5 Litres / 2.0 US gal |
| Standing 1/4 Mile | 12.4 sec |
| Top Speed | 97.3 km/h |
