MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Laverda  Specifications

Laverda SFC 1000 Prototype (2003)

Entry updated

Laverda SFC 1000 Prototype (2003)

At a glance

Capacity
997.6 cc /
Power
98 kW / 133 hp @ 9500 rpm
Torque
105 Nm / 77.4 lb-ft @ 7500 rpm

The full picture.

The Laverda SFC 1000 Prototype was a motorcycle produced in 2003, boasting a four-stroke, 60 degree V-twin engine with a displacement of 997.6cc. It had a liquid cooling system, multi-point electronic fuel injection, and a digital electronic ignition. The engine had a maximum power output of 98kW and a maximum torque of 105Nm. The six-speed transmission was driven by a chain. The bike’s front suspension was equipped with a 43mm Ohlins titanium nitride coated upside-down fork with an external adjustment system for rebound, compression, and preload. The rear suspension featured an aluminum alloy swing-arm with an Ohlins Racing hydraulic monoshock offering adjustable rebound, compression, and preload, with 135mm wheel travel. The front brakes comprised of two 320mm discs with four-piston calipers while the rear brakes were a single 220mm disc with a two-piston caliper. The motorcycle was fitted with a 120/70 ZR 17 front tyre and a 190/50 ZR 17 rear tyre.


Technical specifications:

Make Model: Laverda SFC 1000 Prototype

Motorcycle technical specifications
Year2003
EngineFour stroke, Longitudinal 60 degrees V twin, DOHC, 4 valves per cylinder.
Capacity997.6 cc /
Bore x Stroke97 x 67.5 mm
Cooling SystemLiquid cooling
Compression Ratio11.8:1
InductionMulti-point electronic injection. 57 mm diameter throttle bodies.
IgnitionIntegrated engine management system with digital electronic ignition
StartingElectric
Max power98 kW / 133 hp @ 9500 rpm
Max Torque105 Nm / 77.4 lb-ft @ 7500 rpm
Transmission / Drive6 Speed
Final DriveChain
Front Suspension43 mm ~Ahlins titanium nitride coated upside-down fork. 120 mm wheel travel. External adjustment system for rebound, compression and preload.
Rear SuspensionAluminium alloy swing-arm: ~Ahlins Racing hydraulic monoshock with piggy-back cylinder installed on the left hand side of the swinging arm, rebound, compression, preload adjustable, 135mm wheel travel
Front Brakes2x 320mm discs 4 piston calipers
Rear BrakesSingle 220mm disc 2 piston caliper
Front Tyre120/70 ZR 17
Rear Tyre190/50 ZR 17