Victory Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 22:08:03 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Victory High-Ball (2016) https://motorcyclespecifications.com/victory-high-ball-2016-specs/ Fri, 07 Apr 2023 13:16:57 +0000 https://motorcyclespecifications.com/?p=48283 The 2016 Victory High-Ball motorcycle has a 1731cc engine with a 50-degree V twin and SOHC. It has a split dual exhaust with crossover, electronic fuel injection with dual 45mm

The post Victory High-Ball (2016) appeared first on MotorcycleSpecifications.com.

]]> The 2016 Victory High-Ball motorcycle has a 1731cc engine with a 50-degree V twin and SOHC. It has a split dual exhaust with crossover, electronic fuel injection with dual 45mm throttle bodies, and a carbon fiber reinforced belt final drive. The front suspension is a 43mm conventional telescopic fork with a front wheel travel of 130mm, while the rear suspension is a single mono-tube gas cast aluminum with rising rate linkage and a preload adjustable spring, with a rear wheel travel of 75mm. The front brakes have two 300mm floating rotors with a 4-piston caliper and ABS, while the rear brakes have a single 300mm floating rotor with a 2-piston caliper and ABS. The bike has a length of 2372mm, wheelbase of 1647mm, seat height of 667mm, ground clearance of 120mm, GVWR of 1151lbs, dry weight of 340kg, and fuel capacity of 22 litres. The max power is 96.9hp with a max torque of 144 Nm.

Technical specifications:

Make Model: Victory Hard-Ball

Year: 2016
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Exhaust: Split dual exhaust with crossover
Oil Capacity: 4.73 L / 5.0 US Quarts
Induction: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: -Electric
Battery: 12V, 18 Ah
Max Power: 96.9 hp / 71.3 kW
Max Torque: 144 Nm / 14.6 kgf-m / 106 ft-lb
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas Cast Aluminum with rising rate linkage, Preload adjustable spring
Rear Wheel Travel: 75 mm / 3.0 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper, ABS
Rear Brakes: Single 300mm floating rotor 2 piston caliper, ABS
Front Tyre: 130/70-18 67H Dunlop 491 Elite II
Rear Tyre: 180/70-16 Dunlop Elite 3
Rake: 32 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2372 mm / 93.4 in
Wheelbase: 1647 mm / 64.8 in
Seat Height: 667 mm / 26.2 in
Ground Clearance: 120 mm / 4.7 in
GVWR: 1151 lbs / 523 kg
Dry Weight: 340 kg / 751 lbs
Fuel Capacity: 22 Litres / 5.8 US gal

The post Victory High-Ball (2016) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas Limited Edition (2010) https://motorcyclespecifications.com/victory-vegas-limited-edition-2010-specs/ Tue, 04 Apr 2023 11:10:59 +0000 https://motorcyclespecifications.com/?p=44253 The 2010 Victory Vegas Limited Edition is a V twin motorcycle with a four-stroke engine, self-adjusting cam chains, and hydraulic lifters. Its capacity is 1731cc and it has a compression

The post Victory Vegas Limited Edition (2010) appeared first on MotorcycleSpecifications.com.

]]> The 2010 Victory Vegas Limited Edition is a V twin motorcycle with a four-stroke engine, self-adjusting cam chains, and hydraulic lifters. Its capacity is 1731cc and it has a compression ratio of 9.4:1. The engine is air and oil-cooled with a maximum output of 96.9 hp and 153 Nm of torque. The bike uses electronic fuel injection with dual 45mm throttle bodies and a 6-speed transmission with a carbon fiber reinforced belt final drive. The front suspension is a 43mm inverted cartridge telescopic fork with a 130mm wheel travel, while the rear suspension is a single mono-tube gas forged and cast aluminum with rising-rate linkage and a 100mm wheel travel. The braking system includes a single 300mm floating rotor with 4 piston caliper for the front and a single 300mm floating rotor with a 2 piston caliper for the rear. The front and rear tires are 80/90-21 and 180/55 R18 respectively. It has a seat height of 640mm and a fuel capacity of 17 litres. The dry weight of this motorcycle is 291 kg, and the GVWR is 522 kg.

Technical specifications:

Make Model: Victory Vegas Limited Edition

Year: 2010
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Induction: Electronic Fuel Injection with dual 45mm throttle body
Starting: Electric
Charging System: 48 amps max output
Battery: 12 volts / 18 amp hours
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / / 113 ft/lb
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 -21
Rear Tyre: 180/55 R18
Seat Height: 640 mm / 25.2 in
GVWR: 522 kg / 1151 lbs
Dry Weight: 291 kg / 645 lbs
Fuel Capacity: 17 Litres / US 4.5 gal

The post Victory Vegas Limited Edition (2010) appeared first on MotorcycleSpecifications.com.

]]> Victory Hammer S (2007-08) https://motorcyclespecifications.com/victory-hammer-s-2007-08-specs/ Tue, 04 Apr 2023 07:51:13 +0000 https://motorcyclespecifications.com/?p=44066 The Victory Hammer S motorcycle was produced from 2007-08 with a four-stroke 50-degree V twin SOHC engine and a capacity of 1634 cc/100 cu-in. The compression ratio was 9.8:1 and

The post Victory Hammer S (2007-08) appeared first on MotorcycleSpecifications.com.

]]> The Victory Hammer S motorcycle was produced from 2007-08 with a four-stroke 50-degree V twin SOHC engine and a capacity of 1634 cc/100 cu-in. The compression ratio was 9.8:1 and it had electronic fuel injection with 44mm throttle bodies. It utilized a carbon fiber reinforced belt for its final drive and came with an inverted cartridge telescopic fork for its front suspension and a single mono-tube gas forged and cast aluminum rear suspension with rising-rate linkage. The front brakes were 2x 300mm floating rotor 4 piston calipers while the rear had a single 300mm floating rotor 2 piston caliper. The dimensions were 93.1 inches in length, a wheelbase of 1669mm/65.7in, and a seat height of 660mm/26in. It had a dry weight of 305kg/672lbs and a fuel capacity of 17 liters/4.5 US gallons.

Technical specifications:

Make Model: Victory Hammer S

Year: 2007 – 08
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Wheel: 18 x 3.5 in
Rear Wheel: 18 x 8.5 in
Front Tyre: 130/70 R18
Rear Tyre: 250/40 R18
Rake: 32.7 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.1 in / 2,366 mm
Wheelbase: 1669 mm / 65.7 in
Seat Height: 660 mm / 26 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer S (2007-08) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas (2008-09) https://motorcyclespecifications.com/victory-vegas-2008-09-specs/ Tue, 04 Apr 2023 02:11:04 +0000 https://motorcyclespecifications.com/?p=43751 The Victory Vegas motorcycle was produced for the 2008-09 model years. It has a 1634cc V-twin engine with SOHC and four valves per cylinder. With a compression ratio of 9.8:1

The post Victory Vegas (2008-09) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas motorcycle was produced for the 2008-09 model years. It has a 1634cc V-twin engine with SOHC and four valves per cylinder. With a compression ratio of 9.8:1 and electronic fuel injection, it has a 44mm throttle body and starts electrically with a 12-volt, 18-amp hour battery. The transmission has six speeds, and the final drive is a carbon fiber reinforced belt. Front suspension includes a 43mm inverted cartridge telescopic fork with 130mm wheel travel, while the rear suspension has a single, mono-tube gas forged and cast aluminum with rising-rate linkage and 100mm wheel travel. Both front and rear brakes have a single 300mm floating rotor with four and two-piston calipers, respectively. Front and rear tires are 80/90-21 and 180/55 R18, respectively. The seat height is 640mm or 25.2 inches. It has a gross vehicle weight rating of 522kg or 151 pounds, a dry weight of 291 kg or 645 pounds, and a fuel capacity of 17 liters or 4.5 US gallons.

Technical specifications:

Make Model: Victory Vegas

Year: 2008 – 09
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 -21
Rear Tyre: 180/55 R18
Seat Height: 640 mm / 25.2 i
GVWR: 522 kg / 151 lbs
Dry Weight: 291 kg / 645 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas (2008-09) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas (2003-05) https://motorcyclespecifications.com/victory-vegas-2003-05-specs/ Tue, 04 Apr 2023 02:04:56 +0000 https://motorcyclespecifications.com/?p=43745 The Victory Vegas, produced between 2003 and 2005, is a four-stroke, 1507cc motorcycle with a 50-degree V twin SOHC engine. It has four valves per cylinder, self-adjusting cam chains, and

The post Victory Vegas (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas, produced between 2003 and 2005, is a four-stroke, 1507cc motorcycle with a 50-degree V twin SOHC engine. It has four valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike is air and oil-cooled, and has a compression ratio of 9.2:1. Control is provided via electronic fuel injection and 44mm throttle bodies. A carbon fiber reinforced belt delivers power to the rear wheel, the bike has an electric starter and a five-speed transmission. The bike’s front suspension is a 43mm telescopic fork with 130mm wheel travel, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage having 100mm wheel travel, a preload adjustable spring. Front and rear brakes are single, floating 300mm rotors, with 4 piston and 2 piston calipers respectively. The wheels are fitted with 80/90-21 and 180/55-B18 front and rear tires. The bike has a dry weight of 280 kilograms (617 pounds) and a fuel capacity of 17 liters (4.5 US gallons).

Technical specifications:

Make Model: Victory Vegas

Year: 2003 – 05
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Conventional telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90-21
Rear Tyre: 180/55-B18
Dry Weight: 280 kg / 617 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Victory Hammer (2010) https://motorcyclespecifications.com/victory-hammer-2010-specs/ Mon, 03 Apr 2023 23:03:03 +0000 https://motorcyclespecifications.com/?p=43576 The Victory Hammer 8-Ball motorcycle was manufactured in 2010 with a 1634 cc, air/oil cooled, 50 degree V-twin SOHC engine. The electronic fuel injection system used dual 45 mm throttle

The post Victory Hammer (2010) appeared first on MotorcycleSpecifications.com.

]]> The Victory Hammer 8-Ball motorcycle was manufactured in 2010 with a 1634 cc, air/oil cooled, 50 degree V-twin SOHC engine. The electronic fuel injection system used dual 45 mm throttle bodies, and the compression ratio was 8.7:1. The clutch was wet and multi-plate, and the bike had a 5-speed transmission with a carbon fiber reinforced belt drive. The front suspension was an inverted cartridge telescopic fork, 43mm in diameter, with 5.1 inches of wheel travel. The rear suspension was single, a mono-tube gas cast aluminum with rising rate linkage, with 3.0 inches/76mm of travel and preload adjustable spring. The front brakes were a single 300mm floating rotor 4 piston caliper, and the back brakes were a single 300mm floating rotor 2 piston caliper. The front tire was a 130/70R18, and the rear tire was a 250/40R18. The seat height was 660 mm/26 inches, and the dry weight was 305 kg/672 lbs. The fuel capacity was 17 liters/4.5 gallons.

Technical specifications:

Make Model: Victory Hammer 8-Ball

Year: 2010
Engine: Air / oil, , four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634
Bore x Stroke: 101 x 102 mm
Compression Ratio: 8.7:1
Induction: Electronic Fuel Injection with dual 45 mm throttle bodies
Ignition / Starting: – / electric
Clutch: Wet, multi-plate
Max Power:
Max Torque:
Transmission / Drive: 5 Speed / Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter, 5.1 in 130 mm wheel travel
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, 3.0 in/76 mm travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18
Rear Tyre: 250/40R18
Seat Height: 660 mm / 26 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 gal

The post Victory Hammer (2010) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin Tour (2007) https://motorcyclespecifications.com/victory-kingpin-tour-2007-specs/ Mon, 03 Apr 2023 22:54:57 +0000 https://motorcyclespecifications.com/?p=43568 The 2007 Victory Kingpin Tour is a powerful motorcycle that features a 1507cc engine with a four-stroke V twin design, SOHC, and 4 valves per cylinder. It is air/oil cooled

The post Victory Kingpin Tour (2007) appeared first on MotorcycleSpecifications.com.

]]> The 2007 Victory Kingpin Tour is a powerful motorcycle that features a 1507cc engine with a four-stroke V twin design, SOHC, and 4 valves per cylinder. It is air/oil cooled with a compression ratio of 9.2:1 and electronic fuel injection with 44mm throttle bodies. The motorcycle is easy to start with an electric starter and has a 5-speed transmission with a carbon fiber reinforced belt final drive. The front suspension is an inverted cartridge telescopic fork while the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage with 100mm wheel travel and preload adjustable spring. It has a seat height of 673 mm / 26.5 in, a dry weight of 297 kg / 655 lbs, and a fuel capacity of 17 Litres / 4.5 US gal. The front brakes feature a single 300mm floating rotor 4 piston caliper while the rear brakes feature a single 300mm floating rotor 2 piston caliper. The motorcycle has a GVWR of 549 kg / 1210 lbs and comes with front and rear tires measuring 130/70-18 and 180/55-B18 respectively. Overall, the Victory Kingpin Tour is a powerful motorcycle with great features perfect for long journeys.

Technical specifications:

Make Model: Victory Kingpin Tour

Year: 2007
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70-18
Rear Tyre: 180/55-B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 655 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin Tour (2007) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas (2011-12) https://motorcyclespecifications.com/victory-vegas-2011-12-specs-2/ Mon, 03 Apr 2023 21:28:01 +0000 https://motorcyclespecifications.com/?p=43491 The Victory Vegas Zach Ness motorcycle was made in 2011-2012 and has a 1731cc V twin engine with electronic fuel injection and dual 45mm throttle body. It has a maximum

The post Victory Vegas (2011-12) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas Zach Ness motorcycle was made in 2011-2012 and has a 1731cc V twin engine with electronic fuel injection and dual 45mm throttle body. It has a maximum power of 96.9 hp and 153 Nm of torque, with a 6-speed transmission and carbon fiber reinforced belt final drive. The front suspension has a 43mm inverted telescopic fork and the rear suspension is single, mono-tube gas forged and cast aluminum with rising-rate linkage. It has single 300mm floating rotor brakes with 4 piston calipers in the front and 2 piston calipers in the back, along with an 80/90-21 front tire and 180/55 R18 rear tire. The seat height is 640mm and it has a GVWR of 522 kg and a dry weight of 291 kg. Its fuel capacity is 17 liters, or 4.5 gallons.

Technical specifications:

Make Model: Victory Vegas Zach Ness

Year: 2011 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Induction: Electronic Fuel Injection with dual 45mm throttle body
Starting: Electric
Charging System: 48 amps max output
Battery: 12 volts / 18 amp hours
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / / 113 ft/lb
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 -21
Rear Tyre: 180/55 R18
Seat Height: 640 mm / 25.2 in
GVWR: 522 kg / 1151 lbs
Dry Weight: 291 kg / 645 lbs
Fuel Capacity: 17 Litres / US 4.5 gal

The post Victory Vegas (2011-12) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas (2010) https://motorcyclespecifications.com/victory-vegas-2010-specs/ Mon, 03 Apr 2023 19:20:53 +0000 https://motorcyclespecifications.com/?p=43373 The Victory Vegas motorcycle was first introduced in 2003, but this review focuses on the 2010 model. It features a 1634cc V-twin engine with electronic fuel injection, 6-speed transmission, and

The post Victory Vegas (2010) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas motorcycle was first introduced in 2003, but this review focuses on the 2010 model. It features a 1634cc V-twin engine with electronic fuel injection, 6-speed transmission, and a carbon fiber reinforced belt final drive. The front suspension is a 43mm inverted cartridge telescopic fork with 130mm wheel travel while the rear suspension is a single, mono-tube gas-forged and cast aluminum with 100mm wheel travel, preload adjustable spring. The bike also has front and rear brakes with single 300mm floating rotors and 4 or 2 piston calipers respectively. Other specs include a seat height of 640mm, dry weight of 291kg, and fuel capacity of 17 litres. Overall, the Victory Vegas 2010 model is a powerful and stable ride with a unique design.

Technical specifications:

Make Model: Victory Vegas

Year: 2010
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 -21
Rear Tyre: 180/55 R18
Seat Height: 640 mm / 25.2 i
GVWR: 522 kg / 151 lbs
Dry Weight: 291 kg / 645 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas (2010) appeared first on MotorcycleSpecifications.com.

]]> Victory Boardwalk (2013-14) https://motorcyclespecifications.com/victory-boardwalk-2013-14-specs/ Mon, 03 Apr 2023 16:31:59 +0000 https://motorcyclespecifications.com/?p=43214 The Victory Boardwalk motorcycle was produced in 2013-14, with a four-stroke, 50-degree V-twin engine that has hydraulic lifters and cam chain adjusters. The bike has a capacity of 1731cc or

The post Victory Boardwalk (2013-14) appeared first on MotorcycleSpecifications.com.

]]> The Victory Boardwalk motorcycle was produced in 2013-14, with a four-stroke, 50-degree V-twin engine that has hydraulic lifters and cam chain adjusters. The bike has a capacity of 1731cc or 106 cu-in, and an electronic fuel injection system with 45mm throttle bodies. The bike has a six-speed transmission and a carbon fiber reinforced belt for the final drive. The front suspension is a 43mm conventional telescopic fork, and the rear suspension is a single mono-tube gas system. The brakes include two 300mm x 5mm floating rotors with 4-piston calipers in the front, and a single 300mm x 5mm floating rotor with a 2-piston caliper in the rear. The bike has Metzeler ME880 tires, with a 130/90 16 TL 67H in the front, and a 150/80 B16 TL 71H in the rear. The bike has a ground clearance of 119mm, a wheelbase of 1646mm, and a seat height of 657.9mm. The bike weighs 306.2kg dry, and has a fuel capacity of 17.8 liters. Overall, the Victory Boardwalk is a powerful, stylish cruiser bike with impressive specs and features.

Technical specifications:

Make Model: Victory Boardwalk

Year: 2013 – 14
Engine: Four stroke, 50 degrees V twin SOHC, 4 Valves per cylinder, hydraulic lifters & cam chain adjusters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Exhaust: Dual staggered slash-cut with common volume
Oil Capacity: 5.0 qts/4.75L
Charging System: 38 amps max output
Battery: 12 volts/18 amp hours
Max Power:
Max Torque:
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas
Rear Wheel Travel: 75 mm / 3.0 in
Front Brakes: 2x 300mm x 5mm floating rotor with 4-piston caliper
Rear Brakes: Single 300mm x 5mm floating rotor with 2-piston caliper
Front Tyre: Metzeler ME880, 130/90 16 TL 67H
Rear Tyre: Metzeler ME880, 150/80 B16 TL 71H
Rake: 31.7 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2456 mm / 96.7 in
Ground clearance: 119 mm / 4.7 in
Wheelbase: 1646 mm / 64.8 in
Seat Height: 657.9 mm / 25.9 in.
GVWR: 522.2 kg / 1151 lbs
Dry Weight: 306.2 kg / 675 lbs
Fuel Capacity: 17.8 Litres / 4.7 US gal

The post Victory Boardwalk (2013-14) appeared first on MotorcycleSpecifications.com.

]]> Husaberg FE 550e Enduro (2007) https://motorcyclespecifications.com/husaberg-fe-550e-enduro-2007-specs/ Mon, 03 Apr 2023 11:15:59 +0000 https://motorcyclespecifications.com/?p=42920 The Husaberg FE 550e Enduro motorcycle was manufactured in 2007 and has a four-stroke, single cylinder, OHC engine with a capacity of 549.8 cc. It has a liquid cooling system,

The post Husaberg FE 550e Enduro (2007) appeared first on MotorcycleSpecifications.com.

]]> The Husaberg FE 550e Enduro motorcycle was manufactured in 2007 and has a four-stroke, single cylinder, OHC engine with a capacity of 549.8 cc. It has a liquid cooling system, Keihin MX FCR 41 TPS induction, and Kokusan digital ignition. The transmission is a six-speed with a chain final drive. The frame is made of 25CrMo4 tempered steel, while the front suspension is a WP USD 4860 MA Husaberg Enduro with 295mm of travel, and the rear suspension is a WP PDS 5018 Husaberg Enduro with 320mm of travel. The front brakes consist of a single 260mm disc with a two-piston caliper, while the rear brakes have a single 220mm disc with a one-piston caliper. The front tire size is 90/90-21, and the rear tire size is 140/80-18. The wheelbase is 1490mm, and the seat height is 930mm. The dry weight is 109kg, and the fuel capacity is 9 liters.

Technical specifications:

Make Model: Husaberg FE 550e Enduro

Year: 2007
Engine: Four stroke, single cylinder, OHC, 4 valves per cylinder.
Capacity: 549.8 cc / 33.5 cu-in
Bore x Stroke: 100 x 70 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8:1
Induction: Keihin MX FCR 41 TPS
Lubrication: Pressure circulation, trochoit oil pump
Ignition: Kokusan digital
Starting: Electric
Max Power: NA
Max Torque: NA
Transmission: 6 Speed
Final Drive: Chain
Frame: 25CrMo4 tempered
Front Suspension: WP USD 4860 MA Husaberg Enduro
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: WP PDS 5018 Husaberg Enduro
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single 260mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Wheelbase: 1490 mm / 58.7 in
Seat Height: 930 mm / 26.3 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 9 Litres / 2.4 US gal

The post Husaberg FE 550e Enduro (2007) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Country (2014) https://motorcyclespecifications.com/victory-cross-country-2014-specs-2/ Mon, 03 Apr 2023 09:20:05 +0000 https://motorcyclespecifications.com/?p=42811 The Victory Cross Country is a motorcycle with a 1731cc capacity four-stroke, 50-degree V-twin, SOHC engine with 4 valves per cylinder, hydraulic lifters and self-adjusting cam chains. The bike has

The post Victory Cross Country (2014) appeared first on MotorcycleSpecifications.com.

]]> The Victory Cross Country is a motorcycle with a 1731cc capacity four-stroke, 50-degree V-twin, SOHC engine with 4 valves per cylinder, hydraulic lifters and self-adjusting cam chains. The bike has a split-dual exhaust system, a carbon fiber reinforced belt drive, and electronic fuel injection with 45mm throttle bodies. The bike has a 6-speed transmission and a wet, multi-plate clutch. The front suspension is a conventional telescopic fork, and the rear suspension is a single, mono-tube gas forged and cast aluminum shock with a rising-rate linkage and a preload adjustable spring. The front brakes are 2x 300mm floating rotor 3 piston caliper and the rear brakes are a single 300mm floating rotor 2 piston caliper. The front tire is 130/70 R18 and the rear tire is 180/60 R16. The seat height is 667mm / 26.2 in, and the bike has a gross vehicle weight rating of 618 kg / 1360 lbs. The dry weight of the motorcycle is 347 kg / 765 lbs, and the fuel tank capacity is 22.7 liters / 5.8 US gal.

Technical specifications:

Make Model: Victory Cross Country

Year: 2014
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkagel, preload adjustable spring
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 667 mm / 26.2 in
GVWR: 618 kg / 1360 lbs
Dry Weight: 347 kg / 765 lbs
Fuel Capacity: 22.7 Litres / 5.8 US gal

The post Victory Cross Country (2014) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Country 8-Ball (2014-16) https://motorcyclespecifications.com/victory-cross-country-8-ball-2014-16-specs/ Mon, 03 Apr 2023 07:08:04 +0000 https://motorcyclespecifications.com/?p=42694 The Victory Cross Country 8-Ball motorcycle was produced between 2014 and 2016, featuring a four-stroke, 50-degree V-twin, SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters.

The post Victory Cross Country 8-Ball (2014-16) appeared first on MotorcycleSpecifications.com.

]]> The Victory Cross Country 8-Ball motorcycle was produced between 2014 and 2016, featuring a four-stroke, 50-degree V-twin, SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike has a capacity of 1731cc/106 cu-in, and a bore x stroke of 101 x 108 mm. It is air/oil cooled with a compression ratio of 9.8:1 and a split dual-exhaust with crossover. With electronic fuel injection and 45mm throttle bodies, the bike delivers a maximum power of 96.9 hp/71.3 kW and a max torque of 153 Nm/15.6 kg-m, starting with electric ignition. The Victory Cross Country 8-Ball has a wet, multi-plate clutch and a six-speed transmission with carbon fiber reinforced belt final drive. It also has 43mm conventional telescopic fork front suspension and a single, mono-tube gas forged and cast aluminum rear suspension with preload adjustable spring. The brakes include 2x 300mm floating rotor, 3 piston caliper front brakes and single 300mm floating rotor, 2 piston caliper rear brakes. The bike has a 130/70 R18 Dunlop 491 Elite II front tire and 180/60 R16 Dunlop 491 Elite II rear tire with a trail of 148mm/5.8 in and a rake of 29.0 degrees. It measures 2650mm/104.3in in length, has a wheelbase of 1670mm/65.7in, a seat height of 667mm/26.25in, a ground clearance of 148mm/5.8in, a GVWR of 618kg/1360lbs, and a wet weight of 339kg/747lbs. The fuel capacity is 22.7 litres/5.8 US gal.

Technical specifications:

Make Model: Victory Cross Country 8-Ball

Year: 2014 – 16
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Oil Capacity: 4.73 Litres
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkagel, preload adjustable spring
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18 Dunlop 491 Elite II
Rear Tyre: 180/60 R16 Dunlop 491 Elite II
Trail: 148 mm / 5.8 in
Rake: 29.0 degrees
Dimensions: Length 2650 mm / 104.3 in
Wheelbase: 1670 mm / 65.7 in
Seat Height: 667 mm / 26.25 in
Ground clearance: 148 mm / 5.8 in
GVWR: 618 kg / 1360 lbs
Wet Weight: 339 kg / 747 lbs
Fuel Capacity: 22.7 Litres / 5.8 us gal

The post Victory Cross Country 8-Ball (2014-16) appeared first on MotorcycleSpecifications.com.

]]> Victory Vision (2013-14) https://motorcyclespecifications.com/victory-vision-2013-14-specs/ Sun, 02 Apr 2023 21:23:05 +0000 https://motorcyclespecifications.com/?p=42162 The Victory Vision Tour motorcycle was manufactured from 2013 to 2014 and featured a four-stroke, 50-degree V-twin engine with a capacity of 1731cc. The bike was equipped with a six-speed

The post Victory Vision (2013-14) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vision Tour motorcycle was manufactured from 2013 to 2014 and featured a four-stroke, 50-degree V-twin engine with a capacity of 1731cc. The bike was equipped with a six-speed transmission and a carbon fiber reinforced belt final drive. The Victory Vision had a maximum torque of 146 Nm and a top speed of 200 km/h. The motorcycle had a length of 2702 mm, a wheelbase of 1670 mm, and a ground clearance of 148 mm. It had a fuel capacity of 22.7 L and an oil capacity of 4.73 L. The bike had a consumption average of 5.4 L/100 km and was available in solid black, sunset red, and gold mist. A review by Motorbike Writer highlighted the motorcycle’s split, dual exhaust, and air-adjustable single, mono-tube gas rear suspension.

Technical specifications:

Make Model: Victory Vision Tour

Year: 2013 – 14
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc /106 cub in.
Bore x Stroke: 101 x 108 mm
Compression Ratio: 9.4:1
Cooling System: Air cooled / oil
Fuel System: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: Electric
Battery: 12V, 18 Ah
Clutch: Wet, multi-plate
Exhaust: Split, dual exhaust with crossover
Max Torque: 146 Nm / 14.9 kgf-m / 108 ft-lb
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Rake: 29 degrees
Trail: 137 mm / 5.4 in.
Dimensions: Length: 2702 mm / 106.4 in.
Wheelbase: 1670 mm / 65.7 in.
Ground Clearance: 148 mm / 5.8 in.
Seat Height: 673 mm / 26.5 in
Front Suspension: 43 mm Inverted cartridge telescopic fork
Front Wheel travel: 130 mm / 5.1 in.
Rear Suspension: Single, mono-tube gas forged and cast aluminum with constant-rate linkage, air adjustable
Rear Wheel Travel: 120 mm / 4.7 in.
Front Brakes: 2 x 300 mm floating rotor 4 piston caliper, ABS
Rear Brakes: Single 300 mm floating rotor 2 piston caliper, ABS
Front Wheel: 3.5 x 18 in.
Front Tyre: 130/70 R18, Dunlop Elite 3
Rear Wheel: 5.0 x 16 in.
Rear Tyre: 180/60 R16, Dunlop Elite 3
GVWR: 643 kg / 1414 lbs
Dry-Weight: 394 kg / 869 lbs
Fuel Capacity: 22.7 L / 6 US gal
Oil Capacity: 4.73 L / 5.0 US Quarts
Consumption Average: 5.4 L/100 km / 18.5 km/l / 43.6 US mpg
Top Speed (est.): 200 km/h / 124 mph
Colours: Solid black, Sunset red with black pinstripe, Gold mist
Review: Motorbike Writer

The post Victory Vision (2013-14) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Country (2014) https://motorcyclespecifications.com/victory-cross-country-2014-specs/ Sun, 02 Apr 2023 18:47:01 +0000 https://motorcyclespecifications.com/?p=42013 The Victory Cross Country Tour 15th Anniversary Limited Edition motorcycle was released in 2014. It features a four-stroke, 50 degrees V twin SOHC engine with a capacity of 1731cc/106 cu-in.

The post Victory Cross Country (2014) appeared first on MotorcycleSpecifications.com.

]]> The Victory Cross Country Tour 15th Anniversary Limited Edition motorcycle was released in 2014. It features a four-stroke, 50 degrees V twin SOHC engine with a capacity of 1731cc/106 cu-in. The bike is air/oil cooled and has a compression ratio of 9.4:1. Other features include electronic fuel injection with dual 45mm throttle bodies, a 12V, 18 Ah battery, and a carbon fiber reinforced belt for the final drive. The front suspension is a 43mm conventional telescopic fork, while the rear suspension is a single, mono-tube gas forged and cast aluminum with constant-rate linkage and air adjustable. The bike has front and rear brakes featuring 2x 300mm floating rotor 3 piston caliper and a single 300mm floating rotor 2 piston caliper, respectively. It also sports a 130/70 R18 front tire and a 180/60 R16 rear tire. The bike weighs 384 kg/845 lbs dry and has a fuel capacity of 22.7 liters/5.8 US gal. It has a GVWR of 618 kg/1360 lbs, and its dimensions are 2747 mm/108.1 in in length, 1670 mm/65.7 in in wheelbase, and 148 mm/5.8 in in ground clearance. The seat height is 667 mm/26.3 in, and the rake is 29 degrees. The maximum power of this motorcycle is 96.9 hp/71.3 kW, and the maximum torque is 144 Nm/14.6 kgf-m/106 ft-lb.

Technical specifications:

Make Model: Victory Cross Country Tour 15th Anniversary Limited Edition

Year: 2014
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Exhaust: Split dual exhaust with crossover
Oil Capacity: 4.73 L / 5.0 US Quarts
Induction: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: -Electric
Battery: 12V, 18 Ah
Max Power: 96.9 hp / 71.3 kW
Max Torque: 144 Nm / 14.6 kgf-m / 106 ft-lb
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum with constant-rate linkage, air adjustable
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Rake: 29 degrees
Trail: 142 mm / 5.6 in.
Dimensions: Length: 2747 mm / 108.1 in.
Wheelbase: 1670 mm / 65.7 in
Ground Clearance: 148 mm / 5.8 in
Seat Height: 667 mm / 26.3 in
GVWR: 618 kg / 1360 lbs
Dry Weight: 384 kg / 845 lbs
Fuel Capacity: 22.7 Litres / 5.8 US gal

The post Victory Cross Country (2014) appeared first on MotorcycleSpecifications.com.

]]> Victory Vision Tour Premium (2012-13) https://motorcyclespecifications.com/victory-vision-tour-premium-2012-13-specs/ Sun, 02 Apr 2023 18:21:01 +0000 https://motorcyclespecifications.com/?p=41988 The Victory Vision Arlen Ness is a motorcycle produced in 2012-13. It has a four-stroke V-twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The

The post Victory Vision Tour Premium (2012-13) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vision Arlen Ness is a motorcycle produced in 2012-13. It has a four-stroke V-twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike has a capacity of 1731cc and a compression ratio of 9.8:1. The electronic fuel injection system uses 45mm throttle bodies, and the starting system is electric. The exhaust is split dual with crossover. The clutch is wet and multi-plate, and the transmission is six-speed. Final drive is via a carbon fiber reinforced belt. The front suspension uses a 43mm inverted cartridge telescopic fork with 130mm wheel travel, and the rear has a single mono-tube gas forged and cast aluminum w/ rising-rate linkage with 120mm wheel travel and preload adjustable spring. Braking is handled by two 300mm floating rotors with 3 piston calipers in front, and a single 300mm floating rotor with 2 piston caliper in the rear. The front tire size is 130/70 R18, and the rear is 180/60R16. The seat height is 673mm, and the dry weight is 364 kg. The fuel capacity is 22.7 litres.

Technical specifications:

Make Model: Victory Vision Arlen Ness

Year: 2012 – 13
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731 cc / 105.6 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 45mm throttle bodies
Ignition: Digital
Starting: Electric
Exhaust: Split dual exhaust with crossover
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 120mm wheel travel, preload adjustable spring
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60R16
Seat Height: 673 mm / 24.5 in
Dry Weight: 364 kg / 800 lbs
Fuel Capacity: 22.7 Litres / 6.0 US gal

The post Victory Vision Tour Premium (2012-13) appeared first on MotorcycleSpecifications.com.

]]> Victory High-Ball (2015-16) https://motorcyclespecifications.com/victory-high-ball-2015-16-specs-2/ Sun, 02 Apr 2023 11:15:09 +0000 https://motorcyclespecifications.com/?p=41592 The Victory High-Ball (2015-16) bike model is a gunner bobber with a four-stroke, 50-degree V twin SOHC engine that has 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters.

The post Victory High-Ball (2015-16) appeared first on MotorcycleSpecifications.com.

]]> The Victory High-Ball (2015-16) bike model is a gunner bobber with a four-stroke, 50-degree V twin SOHC engine that has 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike has a capacity of 1731cc/106 cu-in with a bore of 101 x 108 mm. It uses an air/oil cooling system, has a compression ratio of 9.4:1 and an oil capacity of 5.0 qts/4.73ltr. The bike has staggered dual exhaust with crossover and an electronic fuel injection with dual 45mm throttle body. The engine delivers a max power of 81 hp/60.4 kW @ 4810 rpm and max torque of 96 lb-ft/130 Nm @ 2920 rpm. The bike’s clutch is a wet, multi-plate system, and the transmission is a 6-speed drive. It has a carbon-fiber-reinforced belt as the final drive, and the front suspension employs a 43mm conventional telescopic fork, and the rear suspension is a single mono-tube gas, cast aluminum with rising-rate linkage, and a preload-adjustable spring. Braking is conventional, with a single 300 x 5mm/floating rotor/4 piston calipers for the front and a single 300 x 5mm/floating rotor/2 piston caliper for the rear. The bike uses Dunlop 491 E2-RWL tyres, with 130/90 B16 67H for the front, and 140/90 B16 77H for the rear. The bike has a length of 93.4 in/2372 mm, a wheelbase of 64.8 in/1647 mm, a seat height of 658 mm/25.9 in, and a ground clearance of 4.7 in/120 mm. The dry weight of the bike is 25.0 in/635 mm, with a GVWR of 1151 lbs/523 kg, and a fuel capacity of 17 litres/4.5 US gal.

Technical specifications:

Make Model: Victory Gunner Bobber

Year: 2015 – 16
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Induction: Electronic Fuel Injection with dual 45mm throttle body
Starting: Electric
Charging System: 48 amps max output
Battery: 12 volts / 18 amp hours
Max Power: 81 hp / 60.4 kW @ 4810 rpm
Max Torque: 96 lb-ft / 130 Nm @ 2920 rpm
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Conventional telescopic fork,
Front Wheel Travel: 5.1 in / 130 mm
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Rear Wheel Travel: 3.0 in / 75 mm
Brake System Type: Conventional
Front Brakes: Single 300 x 5mm/Floating Rotor/4 Piston Calipers
Rear Brakes: Single 300 x 5mm/Floating Rotor/2 Piston Caliper
Front Tyre: 130/90 B16 67H Dunlop 491 E2-RWL
Front Wheel: 16 x 3.5 in
Rear Tyre: 140/90 B16 77H Dunlop 491 E2-RWL
Rear Wheel: 16 x 3.5 in
Rake: 32 degrees
Dimensions: Length 93.4 in / 2372 mm
Wheelbase: 64.8 in / 1647 mm
Seat Height: 658 mm / 25.9 in
Ground Clearance: 4.7 in / 120 mm
Dry Weight: 25.0 in / 635 mm
GVWR: 1151 lbs / 523 kg
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory High-Ball (2015-16) appeared first on MotorcycleSpecifications.com.

]]> Victory V92SC (2000) https://motorcyclespecifications.com/victory-v92sc-2000-specs/ Sun, 02 Apr 2023 09:16:00 +0000 https://motorcyclespecifications.com/?p=41487 The Victory V92SC motorcycle was first introduced in 2000. It featured a four-stroke, 50 degrees V-twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. Its

The post Victory V92SC (2000) appeared first on MotorcycleSpecifications.com.

]]> The Victory V92SC motorcycle was first introduced in 2000. It featured a four-stroke, 50 degrees V-twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. Its engine had a capacity of 1507 cc and a bore x stroke of 97 x 102 mm. The motorcycle was air/oil cooled and had a compression ratio of 9.2:1.

The bike used electronic fuel injection with 44mm throttle bodies and had an electric starting system. The transmission was a 5-speed and the final drive was a carbon fiber reinforced belt. The front suspension was an inverted cartridge telescopic fork, while the rear suspension was a single, mono-tube gas forged and cast aluminum with a rising-rate linkage and 100mm wheel travel, along with a preload-adjustable spring.

The front brakes were 2x 300mm floating rotor with a 4 piston caliper, while the rear brakes were a single 300mm floating rotor with a 2 piston caliper. The front tire was a 130/90-16 and the rear tire was a 160/80-16. The dry weight of the bike was 288 kg or 635 lbs and the fuel capacity was 19 liters or 5.0 US gallons.

Technical specifications:

Make Model: Victory V92SC

Year: 2000
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/90-16
Rear Tyre: 160/80 -16
Dry Weight: 288 kg / 635 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Victory V92SC (2000) appeared first on MotorcycleSpecifications.com.

]]> Victory Vision Tour Premium (2008) https://motorcyclespecifications.com/victory-vision-tour-premium-2008-specs-2/ Sun, 02 Apr 2023 00:37:00 +0000 https://motorcyclespecifications.com/?p=41003 The Victory Vision Tour Premium (2008) is a four-stroke motorcycle with a 50-degree V twin engine that produces a maximum power of 96.9hp and torque of 153Nm. The engine has

The post Victory Vision Tour Premium (2008) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vision Tour Premium (2008) is a four-stroke motorcycle with a 50-degree V twin engine that produces a maximum power of 96.9hp and torque of 153Nm. The engine has a capacity of 1731cc and a compression ratio of 9.8:1. The exhaust for this bike is a split dual exhaust with crossover. The motorcycle has electronic fuel injection and a carbon-fiber reinforced belt as the final drive. The front suspension has a 43mm inverted cartridge telescopic fork that can travel up to 130mm. The rear suspension is a single, mono-tube gas forged and cast aluminum, with rising-rate linkage which can travel 120mm. The brakes are 2x 300mm floating rotor with a 3 piston caliper in the front and a single 300mm floating rotor with a 2 piston caliper in the rear. The seat height of the bike is 673mm, and the motorcycle has a Gross Vehicle Weight Rating of 643kg. The dry weight of this motorcycle is 365kg, and it has a fuel capacity of 22.7 liters.

Technical specifications:

Make Model: Victory Vision Tour Premium

Year: 2008
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 673 mm / 26.5 in
GVWR: 643 kg / 1414 lbs
Dry Weight: 365 kg / 852 lbs
Fuel Capacity: 22.7 Litres / 6 US gal

The post Victory Vision Tour Premium (2008) appeared first on MotorcycleSpecifications.com.

]]> Victory Hammer S (2009-10) https://motorcyclespecifications.com/victory-hammer-s-2009-10-specs/ Sat, 01 Apr 2023 23:30:59 +0000 https://motorcyclespecifications.com/?p=40943 The Victory Hammer S motorcycle was produced in 2009-2010 with a four-stroke, 50-degree V-twin SOHC engine that has a capacity of 1731cc. It has a compression ratio of 9.4:1, and

The post Victory Hammer S (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Victory Hammer S motorcycle was produced in 2009-2010 with a four-stroke, 50-degree V-twin SOHC engine that has a capacity of 1731cc. It has a compression ratio of 9.4:1, and fuel injection with dual 45mm throttle body. The bike has a six-speed transmission with carbon fiber reinforced belt final drive and a wet, multi-plate clutch. The front suspension is an inverted cartridge telescopic fork with a diameter of 43mm, and the rear suspension is a single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring. The bike has a single 300mm floating rotor 4 piston caliper front brake and a single 300mm floating rotor 2 piston caliper rear brake. The front tyre is 130/70R18, and the rear tyre is 250/40R18. The rake is 33 degrees, and the trail is 140mm/5.5in. The bike is 93.8in/2382mm long, with a wheelbase of 1689mm/66.5in, and a seat height of 660mm/26in. Its dry weight is 305 kg/672 lbs, and it has a fuel capacity of 17 litres/4.5 US gal.

Technical specifications:

Make Model: Victory Hammer S

Year: 2009 – 10
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc / 106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air / oil
Compression Ratio: 9.4:1
Induction: Fuel Injection with dual 45mm throttle body
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Battery: 12 volts / 18 amp hours
Starting: Electric
Clutch: Wet, multi-plate
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Primary Drive: Gear drive with torque compensator
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Rear Wheel Travel: 76 mm / 3.0 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18
Rear Tyre: 250/40R18
Rakem: 33 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.8 in / 2382 mm
Wheelbase: 1689 mm / 66.5 in
Seat Height: 660 mm / 26 in
GVWR: 532 kg / 1173 lbs
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer S (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas Jackpot (2008-09) https://motorcyclespecifications.com/victory-vegas-jackpot-2008-09-specs/ Sat, 01 Apr 2023 16:17:09 +0000 https://motorcyclespecifications.com/?p=40540 The Victory Vegas Jackpot motorcycle was produced from 2008 to 2009. It featured a four-stroke, 50-degree V twin SOHC engine with 4 valves per cylinder and a capacity of 1634cc.

The post Victory Vegas Jackpot (2008-09) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas Jackpot motorcycle was produced from 2008 to 2009. It featured a four-stroke, 50-degree V twin SOHC engine with 4 valves per cylinder and a capacity of 1634cc. The bike was air/oil cooled with a compression ratio of 8.7:1 and electronic fuel injection with 45mm throttle bodies. The ignition was digital, and it started with an electric starter. It had a staggered slash-cut dual exhaust with a crossover. The transmission was a six-speed with a final drive of a carbon fiber reinforced belt. The front suspension was a 43mm inverted cartridge telescopic fork with 130mm wheel travel, and the rear suspension was a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel with a preload adjustable spring. The front brakes were a single 300mm floating rotor with 4 piston caliper, and the rear brakes were a single 300mm floating rotor with a 2 piston caliper. The front tire was an 80/90 R21, and the rear tire was a 180/55 R18. It had a seat height of 673mm / 26.5 inches, a dry weight of 298kg / 657lbs, and a fuel capacity of 17 liters / 4.5 US gallons.

Technical specifications:

Make Model: Victory Vegas Jackpot

Year: 2008 – 09
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 99.7 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 8.7:1
Induction: Electronic Fuel Injection with 45mm throttle bodies
Ignition: Digital
Starting: Electric
Exhaust: Staggered slash-cut dual exhaust with crossover
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 R21
Rear Tyre: 180/55 R18
Seat Height: 673 mm / 26.5 in
Dry-Weight: 298 kg / 657 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas Jackpot (2008-09) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin (2010-12) https://motorcyclespecifications.com/victory-kingpin-2010-12-specs/ Sat, 01 Apr 2023 12:59:04 +0000 https://motorcyclespecifications.com/?p=40363 The Victory Kingpin motorcycle was produced from 2010 to 2012 and has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder and a capacity of 1634

The post Victory Kingpin (2010-12) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin motorcycle was produced from 2010 to 2012 and has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder and a capacity of 1634 cc. It has an air/oil cooling system, electronic fuel injection with 44mm throttle bodies, and a wet, multi-plate clutch. The transmission is six-speed with a carbon fiber reinforced belt final drive. The front suspension is a 43mm inverted cartridge telescopic fork with 130 mm/5.1 in wheel travel, while the rear suspension features single, mono-tube gas forged and cast aluminum with rising-rate linkage and 100 mm/3.9 in wheel travel. The brakes consist of a single 300mm floating rotor with four-piston caliper for the front and a single 300mm floating rotor with two-piston caliper for the rear. The front tire size is 130/70 -21, while the back is 180/55 B18. The seat height is 673 mm/26.5 in, the gross vehicle weight rating is 549 kg/1210 lbs, and the dry weight is 297 kg/654 lbs. The fuel capacity is 17 liters/4.5 US gal.

Technical specifications:

Make Model: Victory Kingpin

Year: 2010 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2010-12) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas Jackpot (2006-07) https://motorcyclespecifications.com/victory-vegas-jackpot-2006-07-specs/ Sat, 01 Apr 2023 12:43:00 +0000 https://motorcyclespecifications.com/?p=40348 The Victory Vegas Jackpot is a motorcycle produced from 2006-07. It is powered by a four-stroke, 50 degree V-twin engine with a capacity of 1634cc. The engine has 4 valves

The post Victory Vegas Jackpot (2006-07) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas Jackpot is a motorcycle produced from 2006-07. It is powered by a four-stroke, 50 degree V-twin engine with a capacity of 1634cc. The engine has 4 valves per cylinder and is cooled by air/oil. The compression ratio is 8.7:1 and the bike has electronic fuel injection with 45mm throttle bodies. The transmission is a 6-speed and the final drive is a carbon fiber reinforced belt. The front suspension uses a 43mm inverted cartridge telescopic fork, while the rear suspension is single, mono-tube gas forged and cast aluminum with rising rate linkage. The bike has a single 300mm floating rotor 4 piston caliper for the front brakes, and a single 300mm floating rotor 2 piston caliper for the rear brakes. The front and rear tires respectively measure 80/90 R21 and 180/55 R18. The seat height is 673mm and the dry weight is 298kg. The fuel tank can hold up to 17 liters of fuel.

Technical specifications:

Make Model: Victory Vegas Jackpot

Year: 2006 – 07
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 99.7 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 8.7:1
Induction: Electronic Fuel Injection with 45mm throttle bodies
Ignition: Digital
Starting: Electric
Exhaust: Staggered slash-cut dual exhaust with crossover
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 R21
Rear Tyre: 180/55 R18
Seat Height: 673 mm / 26.5 in
Dry-Weight: 298 kg / 657 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas Jackpot (2006-07) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Country Factory Custom (2014) https://motorcyclespecifications.com/victory-cross-country-factory-custom-2014-specs/ Sat, 01 Apr 2023 11:19:02 +0000 https://motorcyclespecifications.com/?p=40270 The Victory Cross Country Factory Custom is a motorcycle produced in 2014. The bike is powered by a four-stroke, 1731cc V-twin engine with SOHC and 4 valves per cylinder. The

The post Victory Cross Country Factory Custom (2014) appeared first on MotorcycleSpecifications.com.

]]> The Victory Cross Country Factory Custom is a motorcycle produced in 2014. The bike is powered by a four-stroke, 1731cc V-twin engine with SOHC and 4 valves per cylinder. The compression ratio is 9.8:1, and the engine has a maximum power output of 96.9 hp and 153 Nm of torque. The bike features a six-speed transmission and a carbon fiber reinforced belt final drive. The suspension system includes a 43mm conventional telescopic fork at the front and a single mono-tube gas forged and cast aluminum rear suspension with preload adjustable spring. The front brakes are equipped with 2x 300mm floating rotors and 3 piston calipers, while the rear brake features a single 300mm floating rotor and 2 piston caliper. The motorcycle has a seat height of 667mm, a dry weight of 347kg, and a fuel capacity of 22.7 litres.

Technical specifications:

Make Model: Victory Cross Country Factory Custom

Year: 2014
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkagel, preload adjustable spring
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 667 mm / 26.2 in
GVWR: 618 kg / 1360 lbs
Dry Weight: 347 kg / 765 lbs
Fuel Capacity: 22.7 Litres / 5.8 US gal

The post Victory Cross Country Factory Custom (2014) appeared first on MotorcycleSpecifications.com.

]]> Victory Vision (2011-12) https://motorcyclespecifications.com/victory-vision-2011-12-specs/ Sat, 01 Apr 2023 04:55:05 +0000 https://motorcyclespecifications.com/?p=39912 The Victory Vision Tour motorcycle was produced from 2011-12 and features a four-stroke, 50 degrees V twin engine with a capacity of 1731cc/106 cubic inches. It has electronic fuel injection,

The post Victory Vision (2011-12) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vision Tour motorcycle was produced from 2011-12 and features a four-stroke, 50 degrees V twin engine with a capacity of 1731cc/106 cubic inches. It has electronic fuel injection, a wet multi-plate clutch, and a carbon fiber reinforced belt for final drive. The bike has a maximum torque of 146 Nm/14.9 kgf-m/108 ft-lb and a top speed estimated at 200 km/h or 124 mph. The bike has a solid black, sunset red with black pinstripe, or gold mist color option. The fuel capacity is 22.7 L/6 US gal and has a fuel consumption average of 5.4 L/100 km or 18.5 km/l or 43.6 US mpg. The front brakes are 2 x 300 mm floating rotor 4 piston caliper, with ABS, while the rear brakes have a single 300 mm floating rotor and 2 piston caliper, also with ABS. The front wheel is 3.5 x 18 in., while the rear is 5.0 x 16 in. The rear suspension is a single, mono-tube gas forged and cast aluminum with constant-rate linkage, air adjustable, while the front suspension is a 43 mm inverted cartridge telescopic fork. The bike weighs 394 kg/869 lbs dry and has a seating height of 673 mm/26.5 in.

Technical specifications:

Make Model: Victory Vision Tour

Year: 2011 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc /106 cub in.
Bore x Stroke: 101 x 108 mm
Compression Ratio: 9.4:1
Cooling System: Air cooled / oil
Fuel System: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: Electric
Battery: 12V, 18 Ah
Clutch: Wet, multi-plate
Exhaust: Split, dual exhaust with crossover
Max Torque: 146 Nm / 14.9 kgf-m / 108 ft-lb
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Rake: 29 degrees
Trail: 137 mm / 5.4 in.
Dimensions: Length: 2702 mm / 106.4 in.
Wheelbase: 1670 mm / 65.7 in.
Ground Clearance: 148 mm / 5.8 in.
Seat Height: 673 mm / 26.5 in
Front Suspension: 43 mm Inverted cartridge telescopic fork
Front Wheel travel: 130 mm / 5.1 in.
Rear Suspension: Single, mono-tube gas forged and cast aluminum with constant-rate linkage, air adjustable
Rear Wheel Travel: 120 mm / 4.7 in.
Front Brakes: 2 x 300 mm floating rotor 4 piston caliper, ABS
Rear Brakes: Single 300 mm floating rotor 2 piston caliper, ABS
Front Wheel: 3.5 x 18 in.
Front Tyre: 130/70 R18, Dunlop Elite 3
Rear Wheel: 5.0 x 16 in.
Rear Tyre: 180/60 R16, Dunlop Elite 3
GVWR: 643 kg / 1414 lbs
Dry-Weight: 394 kg / 869 lbs
Fuel Capacity: 22.7 L / 6 US gal
Oil Capacity: 4.73 L / 5.0 US Quarts
Consumption Average: 5.4 L/100 km / 18.5 km/l / 43.6 US mpg
Top Speed (est.): 200 km/h / 124 mph
Colours: Solid black, Sunset red with black pinstripe, Gold mist
Review:

The post Victory Vision (2011-12) appeared first on MotorcycleSpecifications.com.

]]> Victory Vision (2008) https://motorcyclespecifications.com/victory-vision-2008-specs-3/ Sat, 01 Apr 2023 04:53:13 +0000 https://motorcyclespecifications.com/?p=39910 The Victory Vision Tour 10th Anniversary Special Edition motorcycle model was released in 2008. It contains a four-stroke, 50 degrees V twin SOHC engine with a self-adjusting cam chain and

The post Victory Vision (2008) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vision Tour 10th Anniversary Special Edition motorcycle model was released in 2008. It contains a four-stroke, 50 degrees V twin SOHC engine with a self-adjusting cam chain and hydraulic lifters. The capacity of the engine is 1731cc or 106 cu-in, and its bore x stroke is 101 x 108 mm. The cooling system is air/oil cooled, and the compression ratio is 9.8:1. The induction system is electronic fuel injection with 45mm throttle bodies, and it has an electric starting system. The maximum power output is 96.9 hp or 71.3 kW, and the maximum torque is 153 Nm or 15.6 kg-m. The transmission has six speeds, and the final drive is a carbon fiber reinforced belt. The front suspension features a 43mm inverted cartridge telescopic fork with a front wheel travel of 130 mm or 5.1 in while the rear suspension is a single, mono-tube gas forged and cast aluminum with a rising-rate linkage, and the rear wheel travel is 120 mm or 4.7 in. The front brakes have two 300mm floating rotors with a 3 piston caliper, and the rear brakes have a single 300mm floating rotor with a 2 piston caliper. The motorcycle has a 130/70 R18 front tire and a 180/60 R16 rear tire. The seat height is 673 mm or 26.5 in, and the GVWR is 643 kg or 1414 lbs. It has a dry weight of 365 kg or 852 lbs and holds 22.7 liters or 6 US gallons of fuel.

Technical specifications:

Make Model: Victory Vision Tour 10th Anniversary Special Edition

Year: 2008
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 673 mm / 26.5 in
GVWR: 643 kg / 1414 lbs
Dry Weight: 365 kg / 852 lbs
Fuel Capacity: 22.7 Litres / 6 US gal

The post Victory Vision (2008) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Country (2012-13) https://motorcyclespecifications.com/victory-cross-country-2012-13-specs/ Sat, 01 Apr 2023 03:36:03 +0000 https://motorcyclespecifications.com/?p=39838 The Victory Cross Country (2012-13) is a motorcycle with a four-stroke, 50-degree V-twin SOHC engine and self-adjusting cam chains. It has a capacity of 1731cc/106 cu-in with a compression ratio

The post Victory Cross Country (2012-13) appeared first on MotorcycleSpecifications.com.

]]> The Victory Cross Country (2012-13) is a motorcycle with a four-stroke, 50-degree V-twin SOHC engine and self-adjusting cam chains. It has a capacity of 1731cc/106 cu-in with a compression ratio of 9.8:1 and a split dual exhaust with crossover. The bike has electronic fuel injection with 45mm throttle bodies and an electric starting system. It can produce a maximum power of 96.9 hp/71.3 kW and maximum torque of 153 Nm/15.6 kg-m. The clutch is a wet, multi-plate type with a six-speed transmission and carbon fiber reinforced belt. The front suspension is a 43mm conventional telescopic fork with 130mm/5.1in of wheel travel, while the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage, preload adjustable spring, and 120mm/4.7in of wheel travel. The bike has two front brakes with 300mm floating rotor and 3 piston caliper, and a single rear brake with 300mm floating rotor and 2 piston caliper. The front and rear tires are 130/70 R18 and 180/60 R16, respectively. The seat height is 667mm/26.2in, while the gross vehicle weight rating is 618kg/1360lbs, with a dry weight of 347kg/765lbs. The fuel capacity is 22.7 litres/5.8 US gal.

Technical specifications:

Make Model: Victory Cross Country

Year: 2012 – 13
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkagel, preload adjustable spring
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 667 mm / 26.2 in
GVWR: 618 kg / 1360 lbs
Dry Weight: 347 kg / 765 lbs
Fuel Capacity: 22.7 Litres / 5.8 US gal

The post Victory Cross Country (2012-13) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin Deluxe (2005) https://motorcyclespecifications.com/victory-kingpin-deluxe-2005-specs/ Sat, 01 Apr 2023 02:35:06 +0000 https://motorcyclespecifications.com/?p=39781 The Victory Kingpin Deluxe is a 2005 motorcycle with a four-stroke, 50-degree V twin engine that has a capacity of 1507cc. It has electronic fuel injection with 44mm throttle bodies,

The post Victory Kingpin Deluxe (2005) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin Deluxe is a 2005 motorcycle with a four-stroke, 50-degree V twin engine that has a capacity of 1507cc. It has electronic fuel injection with 44mm throttle bodies, a 5-speed transmission and a carbon fiber reinforced belt final drive. The front suspension is an inverted cartridge telescopic fork, while the rear suspension is a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring. The front brakes consist of a single 300mm floating rotor with 4 piston caliper, and the rear brakes are single 300mm floating rotor with a 2 piston caliper. The tires are 130/70-18 in the front and 180/55-B18 in the rear, and the seat height is 673 mm/26.5 in. The motorcycle has a Gross Vehicle Weight Rating of 549 kg/1210 lbs, and a dry weight of 297 kg / 654 lbs. The fuel capacity is 17 litres/4.5 US gal.

Technical specifications:

Make Model: Victory Kingpin Deluxe

Year: 2005
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70-18
Rear Tyre: 180/55-B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin Deluxe (2005) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas Jackpot (2012-13) https://motorcyclespecifications.com/victory-vegas-jackpot-2012-13-specs/ Fri, 31 Mar 2023 22:26:01 +0000 https://motorcyclespecifications.com/?p=39553 The Victory Vegas Jackpot is a motorcycle model manufactured in 2012-13 with a four-stroke, 50-degree V twin SOHC engine with four valves per cylinder. The engine has a capacity of

The post Victory Vegas Jackpot (2012-13) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas Jackpot is a motorcycle model manufactured in 2012-13 with a four-stroke, 50-degree V twin SOHC engine with four valves per cylinder. The engine has a capacity of 1634 cc / 100 cu-in with a bore x stroke of 101 x 102 mm. The cooling system uses air/oil, and the compression ratio is 9.8:1. The Victory Vegas Jackpot uses an electronic fuel injection with 44mm throttle bodies and has an electric starting system. The bike has a 12-volt/ 18amp battery and a wet, multi-plate clutch. It has a six-speed transmission and a carbon-fiber reinforced belt as its final drive. The Victory Vegas Jackpot comes with a 43mm inverted cartridge telescopic front fork with a front wheel travel of 130 mm / 5.1 in. At the rear, the motorcycle has a single, mono-tube gas-forged and cast aluminum suspension system with rising-rate linkage with a rear wheel travel of 100mm / 3.9 in. The front wheel has a single 300mm floating rotor with a 4-piston caliper, while the rear wheel has a single 300mm floating rotor with a 2-piston caliper. The motorcycle has an 80/90 R21 front tire and a 250/40 R18 rear tire. The Victory Vegas Jackpot weighs 294 kg / 649 lbs and has a fuel capacity of 17 liters / 4.5 US gallons. The seat height is 653 mm / 25.7 in, and it has a gross vehicle weight rating (GVWR) of 531 kg / 1171 lbs.

Technical specifications:

Make Model: Victory Jackpot

Year: 2012 – 13
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 R21
Rear Tyre: 250/40 R18
Seat Height: 653 mm / 25.7 in
GVWR: 531 kg / 1171 lbs
Dry-Weight: 294 kg / 649 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas Jackpot (2012-13) appeared first on MotorcycleSpecifications.com.

]]> Victory Octane (2016-17) https://motorcyclespecifications.com/victory-octane-2016-17-specs/ Fri, 31 Mar 2023 19:31:55 +0000 https://motorcyclespecifications.com/?p=39392 The Victory Octane is a motorcycle model produced between 2016 and 2017. It contains a four-stroke, 60 degree V twin DOHC engine with 1179cc capacity and 4 valves per cylinder,

The post Victory Octane (2016-17) appeared first on MotorcycleSpecifications.com.

]]> The Victory Octane is a motorcycle model produced between 2016 and 2017. It contains a four-stroke, 60 degree V twin DOHC engine with 1179cc capacity and 4 valves per cylinder, as well as hydraulic lifters and cam chain adjusters. Other features include dual slash-cut mufflers with a common volume exhaust system, 6-speed transmission with belt final drive ratio of 2.536:1, and a sequenced fuel injection with a single 60mm throttle body. The bike is capable of producing up to 104 horsepower and 76 ft-lbs of torque at 8000 rpm and 6000 rpm, respectively. The frame is made of cast-aluminum semi-double-cradle with steel backbones, while the suspension includes 41mm damper tube forks with dual-rate springs on the front and dual shocks with adjustable preload on the rear. The front and rear wheels are respectively 18 x 3.5-inch cast spokes and 17 x 4.5-inch cast 10-spokes, with their corresponding tyres being 130/70-18 63H and 160/70-17 76H. The rake angle is 29.0 degrees with a trail of 130 mm and a lean angle of 32 degrees. The dry weight is 243 kg and it has a fuel capacity of 12.9 litres / 3.4 US gal. ABS brakes are standard on both the front and rear wheels.

Technical specifications:

Make Model: Victory Octane

Year: 2016 – 17
Engine: Four stroke, 60 degrees V twin DOHC, 4 Valves per cylinder, hydraulic lifters & cam chain adjusters
Capacity: 1179cc / 71.9 ci-in
Bore x Stroke: 101.0 X 73.6 mm
Cooling System: Liquid cooled
Compression Ratio: 10.8:1
Exhaust: Dual slash-cut mufflers with common volume
Oil Capacity: 4.26 Litres
Induction: Sequential fuel injection with single 60mm throttle body
Starting: -Electric
Clutch: Wet, multi-plate
Exhaust: Dual staggered slash-cut with common volume
Max Power: 104 hp / 77 kW @ 8000 rpm
Max Torque: 76 ft-lb / 99 Nm @ 6000 rpm
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Belt
Final Drive Ratio: 2.536: 1
Frame: Cast-aluminium semi-double-cradle with tubular-steel backbones
Front Suspension: 41mm Damper tube forks with dual rate springs
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Dual shocks with dual rate springs adjustable preload
Rear Wheel Travel: 75 mm / 3.0 in
Front Brakes: Single 298mm with 2 piston caliper ABS standard
Rear Brakes: Single 298mm with 1 piston caliper ABS standard
Front Wheel: 18 X 3.5-IN. CAST, Spoke
Rear Wheel: 17 X 4.5-IN. CAST 10-Spoke
Front Tyre: 130/70-18 63H
Rear Tyre: 160/70-17 76H
Rake: 29.0 degrees
Trail: 130 mm / 5.1 in
Lean Angle: 32 degrees
Dimensions: Length 2286 mm / 90.9 in
Wheelbase: 1578 mm / 62.1 in
Seat Height: 658 mm / 25.9 in
Dry Weight: 243 kg / 535.7 lbs
Fuel Capacity: 12.9 Litres / 3.4 US gal

The post Victory Octane (2016-17) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas 8 (2007-08) https://motorcyclespecifications.com/victory-vegas-8-2007-08-specs/ Fri, 31 Mar 2023 17:06:02 +0000 https://motorcyclespecifications.com/?p=39261 The Victory Vegas 8 Ball motorcycle was produced from 2007 to 2008 with a 1634 cc V-twin engine featuring 4 valves per cylinder and a 9.8:1 compression ratio. Induction is

The post Victory Vegas 8 (2007-08) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas 8 Ball motorcycle was produced from 2007 to 2008 with a 1634 cc V-twin engine featuring 4 valves per cylinder and a 9.8:1 compression ratio. Induction is achieved through electronic fuel injection with 44mm throttle bodies, while the bike is started electrically with a 12 volt, 18 amp hour battery. The wet, multi-plate clutch is backed by a 6-speed transmission which drives a carbon fiber reinforced belt for final propulsion. Suspension components consist of a 43 mm inverted cartridge telescopic fork up front and a single, mono-tube gas forged and cast aluminum rear shock absorber with rising rate linkage. The front brake system utilizes a 300 mm floating rotor and 4 piston caliper, while the rear uses a single 300 mm floating rotor and 2 piston caliper. The bike rides on an 80/90-21 front tire and a 180/55 R18 rear tire, with seat height being 640 mm (25.2 inches). The dry weight of the Victory Vegas is 291 kg (645 lbs) and GVWR is 522 kg (151 lbs). Fuel capacity for the bike is 17 liters (4.5 US gallons).

Technical specifications:

Make Model: Victory Vegas 8 Ball

Year: 2007 – 08
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 -21
Rear Tyre: 180/55 R18
Seat Height: 640 mm / 25.2 i
GVWR: 522 kg / 151 lbs
Dry Weight: 291 kg / 645 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas 8 (2007-08) appeared first on MotorcycleSpecifications.com.

]]> Victory Vision (2007-08) https://motorcyclespecifications.com/victory-vision-2007-08-specs-2/ Fri, 31 Mar 2023 12:03:00 +0000 https://motorcyclespecifications.com/?p=38988 The Victory Vision Street motorcycle model from 2007-08 has a four-stroke, 50 degrees V twin engine with 4 valves per cylinder and self-adjusting cam chains. It has a capacity of

The post Victory Vision (2007-08) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vision Street motorcycle model from 2007-08 has a four-stroke, 50 degrees V twin engine with 4 valves per cylinder and self-adjusting cam chains. It has a capacity of 1731cc/106 cu-in and a compression ratio of 9.8:1. Induction is through electronic fuel injection with 45mm throttle bodies, and it has a carbon fiber reinforced belt for final drive. The front suspension is a 43mm inverted cartridge telescopic fork, while the rear has a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage suspension. The motorcycle has a seat height of 673mm/26.5in and a dry weight of 325kg/804lbs. It also has a fuel capacity of 22.7 litres/6.0 US gal.

Technical specifications:

Make Model: Victory Vision Street

Year: 2007 – 08
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 673 mm / 26.5 in
GVWR: 641 kg / 1414 lbs
Dry Weight: 325 kg / 804 lbs
Fuel Capacity: 22.7 Litres / 6.0 US gal

The post Victory Vision (2007-08) appeared first on MotorcycleSpecifications.com.

]]> Victory Hammer (2013-14) https://motorcyclespecifications.com/victory-hammer-2013-14-specs/ Fri, 31 Mar 2023 00:54:03 +0000 https://motorcyclespecifications.com/?p=38366 The Victory Hammer 8-Ball motorcycle was produced from 2013 to 2014. It features a four-stroke V-twin SOHC engine with a capacity of 1731cc, 4 valves per cylinder, and fuel injection

The post Victory Hammer (2013-14) appeared first on MotorcycleSpecifications.com.

]]> The Victory Hammer 8-Ball motorcycle was produced from 2013 to 2014. It features a four-stroke V-twin SOHC engine with a capacity of 1731cc, 4 valves per cylinder, and fuel injection with dual 45mm throttle body. The bike has a maximum power output of 96.9 horsepower and maximum torque of 153 Nm. The transmission is a six-speed gearbox with a carbon fiber reinforced belt for final drive. The front suspension is an inverted cartridge telescopic fork with a 43mm diameter and the rear suspension is a single, mono-tube gas, cast aluminum with rising rate linkage and preload adjustable spring. The bike has a 33-degree rake and a trail of 140mm. The dimensions of the bike are 93.8 in length, 1689mm wheelbase, and a seat height of 660mm. The dry weight is 305kg, with a fuel capacity of 17 litres. The brakes consist of a single 300mm floating rotor with a 4-piston caliper in the front and a single 300mm floating rotor with a 2-piston caliper in the rear. The Victory Hammer 8-Ball is a powerful and well-equipped motorcycle suitable for cruising and touring.

Technical specifications:

Make Model: Victory Hammer 8-Ball

Year: 2013 – 14
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc / 106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air / oil
Compression Ratio: 9.4:1
Induction: Fuel Injection with dual 45mm throttle body
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Battery: 12 volts / 18 amp hours
Starting: Electric
Clutch: Wet, multi-plate
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Primary Drive: Gear drive with torque compensator
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Rear Wheel Travel: 76 mm / 3.0 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18
Rear Tyre: 250/40R18
Rakem: 33 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.8 in / 2382 mm
Wheelbase: 1689 mm / 66.5 in
Seat Height: 660 mm / 26 in
GVWR: 532 kg / 1173 lbs
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer (2013-14) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Country Cory Ness Limited Edition (2014) https://motorcyclespecifications.com/victory-cross-country-cory-ness-limited-edition-2014-specs/ Thu, 30 Mar 2023 11:46:03 +0000 https://motorcyclespecifications.com/?p=37630 The 2014 Victory Cross Country Cory Ness Limited Edition motorcycle is a powerful and visually striking bike with a 1731cc V-twin engine, producing 96.9 horsepower and 153 Nm of torque.

The post Victory Cross Country Cory Ness Limited Edition (2014) appeared first on MotorcycleSpecifications.com.

]]> The 2014 Victory Cross Country Cory Ness Limited Edition motorcycle is a powerful and visually striking bike with a 1731cc V-twin engine, producing 96.9 horsepower and 153 Nm of torque. The bike features a split dual exhaust with crossover, electronic fuel injection with 45mm throttle bodies, and a wet, multi-plate clutch. It has a six-speed transmission, a carbon fiber reinforced belt for final drive, and an air/oil cooling system. The front suspension consists of a 43mm conventional telescopic fork, while the rear suspension is a single mono-tube gas forged and cast aluminum with a rising-rate linkage and preload adjustable spring. The front and rear brakes feature floating rotors with 3 and 2 piston calipers respectively. The bike has a seat height of 667mm, a GVWR of 618kg, and a dry weight of 347kg, with a fuel capacity of 22.7 litres. Overall, the Victory Cross Country Cory Ness Limited Edition is a high-performance motorcycle that boasts both style and power.

Technical specifications:

Make Model: Victory Cross Country Cory Ness Limited Edition

Year: 2014
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkagel, preload adjustable spring
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 667 mm / 26.2 in
GVWR: 618 kg / 1360 lbs
Dry Weight: 347 kg / 765 lbs
Fuel Capacity: 22.7 Litres / 5.8 US gal

The post Victory Cross Country Cory Ness Limited Edition (2014) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas Ness (2005) https://motorcyclespecifications.com/victory-vegas-ness-2005-specs/ Thu, 30 Mar 2023 02:56:04 +0000 https://motorcyclespecifications.com/?p=37127 The Victory Vegas Ness motorcycle was manufactured in 2005 and is equipped with a 1507cc 4-stroke, 50-degree V twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and

The post Victory Vegas Ness (2005) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas Ness motorcycle was manufactured in 2005 and is equipped with a 1507cc 4-stroke, 50-degree V twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike has a compression ratio of 9.2:1 and uses electronic fuel injection with 44mm throttle bodies. It relies on an electric starting system and a 5-speed transmission to get moving. The final drive features a carbon fiber-reinforced belt. The bike is air/oil cooled and has a conventional telescopic fork on the front with 130mm wheel travel, while the rear has a single mono-tube gas-forged and cast aluminum suspension with 100mm wheel travel and preload adjustable spring. The front brakes are a single 300mm floating rotor with a 4-piston caliper, and the rear brakes are a single 300mm floating rotor with a 2-piston caliper. The bike has 80/90-21 front tyres and 180/55-B18 rear tyres, is 280 kg or 617 lbs without any fluids, and has a fuel capacity of 17 litres or 4.5 US gallons.

Technical specifications:

Make Model: Victory Vegas Ness

Year: 2005
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Conventional telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90-21
Rear Tyre: 180/55-B18
Dry Weight: 280 kg / 617 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas Ness (2005) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas Jackpot (2014) https://motorcyclespecifications.com/victory-vegas-jackpot-2014-specs/ Wed, 29 Mar 2023 22:31:59 +0000 https://motorcyclespecifications.com/?p=36878 The 2014 Victory Jackpot is a motorcycle with a four-stroke, 50 degrees V-twin engine, delivering 1634cc/100 cu-in capacity. It has a compression ratio of 9.8:1 and is cooled by air

The post Victory Vegas Jackpot (2014) appeared first on MotorcycleSpecifications.com.

]]> The 2014 Victory Jackpot is a motorcycle with a four-stroke, 50 degrees V-twin engine, delivering 1634cc/100 cu-in capacity. It has a compression ratio of 9.8:1 and is cooled by air and oil. The bike is fuel-injected with 44mm throttle bodies, has an electronic ignition, and starts with a push of a button using a 12-volt 18-amp-hour battery. The clutch is a wet, multi-plate, and the transmission has six speeds, leading to the carbon fiber-reinforced belt final drive.

This cruiser motorcycle features 43mm inverted cartridge telescopic fork as the front suspension, and the rear suspension is a single, mono-tube gas forged and cast aluminum with a rising-rate linkage. The front tire is 80/90 R21, and the rear tire is 250/40 R18. The front brake is a single 300mm floating rotor 4 piston caliper, while the rear brake is a single 300mm floating rotor 2 piston caliper.

The bike weighs 649 pounds when dry and has a seat height of 653mm/25.7 inches. The GVWR is 531 kg/11 71 pounds, and it has a relatively small fuel capacity of 17 litres/4.5 US gallons. Overall the Victory Jackpot looks to be a competent cruiser with a large displacement engine and a comfortable suspension setup.

Technical specifications:

Make Model: Victory Jackpot

Year: 2014
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 R21
Rear Tyre: 250/40 R18
Seat Height: 653 mm / 25.7 in
GVWR: 531 kg / 1171 lbs
Dry-Weight: 294 kg / 649 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas Jackpot (2014) appeared first on MotorcycleSpecifications.com.

]]> Victory Vision (2008) https://motorcyclespecifications.com/victory-vision-2008-specs-2/ Wed, 29 Mar 2023 20:50:01 +0000 https://motorcyclespecifications.com/?p=36780 The Victory Vision Street Premium motorcycle was released in 2008 and is powered by a four-stroke, 50-degree V twin, SOHC engine with a capacity of 1731cc. The bike has a

The post Victory Vision (2008) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vision Street Premium motorcycle was released in 2008 and is powered by a four-stroke, 50-degree V twin, SOHC engine with a capacity of 1731cc. The bike has a compression ratio of 9.8:1 and is cooled using an air/oil cooling system. The bike features a wet, multi-plate clutch and a six-speed transmission, with final drive provided by a carbon fiber reinforced belt. The front suspension includes a 43mm inverted cartridge telescopic fork with 130 mm of wheel travel, while the rear suspension includes a single, mono-tube gas forged and cast aluminum with rising-rate linkage and 120 mm of wheel travel. The bike has front and rear brakes featuring floating rotors and piston calipers, with the front wheel being 300 mm and the rear wheel a single 300 mm. The bike also has a seat height of 673 mm and a fuel capacity of 22.7 litres. With a dry weight of 365 kg, the bike has a GVWR of 641 kg. Overall, the Victory Vision Street Premium is a powerful and advanced motorcycle with a range of features designed to provide a smooth and comfortable ride.

Technical specifications:

Make Model: Victory Vision Street Premium

Year: 2008
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 673 mm / 26.5 in
GVWR: 641 kg / 1414 lbs
Dry Weight: 365 kg / 804.6 lbs
Fuel Capacity: 22.7 Litres / 6.0 US gal

The post Victory Vision (2008) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Country (2011-12) https://motorcyclespecifications.com/victory-cross-country-2011-12-specs/ Wed, 29 Mar 2023 20:30:58 +0000 https://motorcyclespecifications.com/?p=36763 The Victory Cross Country Cory Ness motorcycle was manufactured between 2011 and 2012. It has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder, self-adjusting cam

The post Victory Cross Country (2011-12) appeared first on MotorcycleSpecifications.com.

]]> The Victory Cross Country Cory Ness motorcycle was manufactured between 2011 and 2012. It has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The engine has a capacity of 1731 cc or 105.6 cu-in with a bore x stroke of 101 x 108 mm. The cooling system is air/oil cooled, and the compression ratio is 9.8:1. The motorcycle has electronic fuel injection with 45mm throttle bodies and digital ignition. The starting system is electric. The exhaust is split dual with a crossover, and the clutch is wet and multi-plate. It has a 6-speed transmission and a final drive of carbon fiber reinforced belt. The front suspension has a 43mm inverted cartridge telescopic fork with 130mm wheel travel, while the rear suspension is a single, mono-tube gas forged, and cast aluminum w/ rising-rate linkage with 120mm wheel travel and a preload adjustable spring. The front brakes have 2x 300mm floating rotors with a 3-piston caliper, and the rear brake has a single 300mm floating rotor with a 2-piston caliper. The front tire size is 130/70 R18, and the rear is 180/60 R16. The seat height is 667mm or 26.25 inches. The GVWR of the motorcycle is 618kg or 1360lbs, and the dry weight is 347kg or 765lbs. The fuel capacity is 22.7 liters or 5.8 US gallons.

Technical specifications:

Make Model: Victory Cross Country Cory Ness

Year: 2011 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731 cc / 105.6 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 45mm throttle bodies
Ignition: Digital
Starting: Electric
Exhaust: Split dual exhaust with crossover
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 120mm wheel travel, preload adjustable spring
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 667 mm / 26.25 in
GVWR: 618 kg / 1360 lbs
Dry Weight: 347 kg / 765 lbs
Fuel Capacity: 22.7 Litres / 5.8 us gal

The post Victory Cross Country (2011-12) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin (2008) https://motorcyclespecifications.com/victory-kingpin-2008-specs/ Wed, 29 Mar 2023 13:43:59 +0000 https://motorcyclespecifications.com/?p=36386 The Victory Kingpin 8 Ball motorcycle was produced in 2008 and has a four-stroke, 50-degree V twin SOHC engine with a capacity of 1634 cc. It has a compression ratio

The post Victory Kingpin (2008) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin 8 Ball motorcycle was produced in 2008 and has a four-stroke, 50-degree V twin SOHC engine with a capacity of 1634 cc. It has a compression ratio of 9.8:1 and uses electronic fuel injection with 44mm throttle bodies. The clutch is a wet, multi-plate, and the transmission has six speeds. The final drive is a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage. The bike has a single 300mm floating rotor 4 piston caliper for the front brakes and a single 300mm floating rotor 2 piston caliper for the rear brakes. The front tire is 130/70-21, and the rear tire is 180/55 B18. The seat height is 673 mm, and the dry weight is 304 kg. The fuel capacity is 17 liters, and the GVWR is 549 kg.

Technical specifications:

Make Model: Victory Kingpin 8 Ball

Year: 2008
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 304 kg / 670 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2008) appeared first on MotorcycleSpecifications.com.

]]> Victory V92C (2000) https://motorcyclespecifications.com/victory-v92c-2000-specs/ Wed, 29 Mar 2023 10:11:59 +0000 https://motorcyclespecifications.com/?p=36189 The Victory V92C is a motorcycle made in 2000 with a four-stroke, 50-degree V twin SOHC engine, hydraulic lifters, and self-adjusting cam chains. With a capacity of 1507 cc and

The post Victory V92C (2000) appeared first on MotorcycleSpecifications.com.

]]> The Victory V92C is a motorcycle made in 2000 with a four-stroke, 50-degree V twin SOHC engine, hydraulic lifters, and self-adjusting cam chains. With a capacity of 1507 cc and a compression ratio of 9.2:1, it uses electronic fuel injection with 44mm throttle bodies and has a carbon fiber reinforced belt final drive. The front suspension consists of an inverted cartridge telescopic fork, while the rear suspension has a single, monotube gas forged and cast aluminum with rising-rate linkage and 100mm wheel travel. The front brakes use 2x 300mm floating rotors with a 4-piston caliper, while the rear brake has a single 300mm floating rotor and 2-piston caliper. The front tire is 130/90-16, and the rear tire is 160/80-16. The dry weight is 288 kg, and it has a fuel capacity of 19 liters/ 5.0 US gal.

Technical specifications:

Make Model: Victory V92C

Year: 2000
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/90-16
Rear Tyre: 160/80 -16
Dry Weight: 288 kg / 635 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Victory V92C (2000) appeared first on MotorcycleSpecifications.com.

]]>