Victory Kingpin Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 23:01:38 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Victory Kingpin (2010-12) https://motorcyclespecifications.com/victory-kingpin-2010-12-specs/ Sat, 01 Apr 2023 12:59:04 +0000 https://motorcyclespecifications.com/?p=40363 The Victory Kingpin motorcycle was produced from 2010 to 2012 and has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder and a capacity of 1634

The post Victory Kingpin (2010-12) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin motorcycle was produced from 2010 to 2012 and has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder and a capacity of 1634 cc. It has an air/oil cooling system, electronic fuel injection with 44mm throttle bodies, and a wet, multi-plate clutch. The transmission is six-speed with a carbon fiber reinforced belt final drive. The front suspension is a 43mm inverted cartridge telescopic fork with 130 mm/5.1 in wheel travel, while the rear suspension features single, mono-tube gas forged and cast aluminum with rising-rate linkage and 100 mm/3.9 in wheel travel. The brakes consist of a single 300mm floating rotor with four-piston caliper for the front and a single 300mm floating rotor with two-piston caliper for the rear. The front tire size is 130/70 -21, while the back is 180/55 B18. The seat height is 673 mm/26.5 in, the gross vehicle weight rating is 549 kg/1210 lbs, and the dry weight is 297 kg/654 lbs. The fuel capacity is 17 liters/4.5 US gal.

Technical specifications:

Make Model: Victory Kingpin

Year: 2010 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2010-12) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin (2008) https://motorcyclespecifications.com/victory-kingpin-2008-specs/ Wed, 29 Mar 2023 13:43:59 +0000 https://motorcyclespecifications.com/?p=36386 The Victory Kingpin 8 Ball motorcycle was produced in 2008 and has a four-stroke, 50-degree V twin SOHC engine with a capacity of 1634 cc. It has a compression ratio

The post Victory Kingpin (2008) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin 8 Ball motorcycle was produced in 2008 and has a four-stroke, 50-degree V twin SOHC engine with a capacity of 1634 cc. It has a compression ratio of 9.8:1 and uses electronic fuel injection with 44mm throttle bodies. The clutch is a wet, multi-plate, and the transmission has six speeds. The final drive is a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage. The bike has a single 300mm floating rotor 4 piston caliper for the front brakes and a single 300mm floating rotor 2 piston caliper for the rear brakes. The front tire is 130/70-21, and the rear tire is 180/55 B18. The seat height is 673 mm, and the dry weight is 304 kg. The fuel capacity is 17 liters, and the GVWR is 549 kg.

Technical specifications:

Make Model: Victory Kingpin 8 Ball

Year: 2008
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 304 kg / 670 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2008) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin (2004-05) https://motorcyclespecifications.com/victory-kingpin-2004-05-specs/ Mon, 27 Mar 2023 14:00:58 +0000 https://motorcyclespecifications.com/?p=33701 The Victory Kingpin motorcycle was produced between 2004 and 05. It is equipped with a four-stroke, 50-degree V-twin, SOHC engine that has 4 valves per cylinder, self-adjusting cam chains, hydraulic

The post Victory Kingpin (2004-05) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin motorcycle was produced between 2004 and 05. It is equipped with a four-stroke, 50-degree V-twin, SOHC engine that has 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters, and a capacity of 1507 cc/91.9 cu-in. The bike has air/oil cooling and a compression ratio of 9.2:1. It features electronic fuel injection, a 5-speed transmission, and a carbon fiber-reinforced belt for the final drive. The front suspension is an inverted cartridge telescopic fork, while the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage and 100mm wheel travel. The front brakes use a single 300mm floating rotor 4 piston caliper, and the rear brakes use a single 300mm floating rotor 2 piston caliper. The front tire is 130/70-18, and the rear tire is 180/55-B18. The seat height is 673 mm/26.5 in, the GVWR is 549 kg/1210 lbs, and the dry weight is 297 kg/654 lbs. The fuel capacity of the Victory Kingpin is 17 liters/4.5 US gallons.

Technical specifications:

Make Model: Victory Kingpin

Year: 2004 – 05
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70-18
Rear Tyre: 180/55-B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2004-05) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin (2009-10) https://motorcyclespecifications.com/victory-kingpin-2009-10-specs/ Sun, 26 Mar 2023 11:59:14 +0000 https://motorcyclespecifications.com/?p=32224 The Victory Kingpin Low motorcycle was produced in 2009-10 with a four-stroke, 50 degrees V twin SOHC engine and a capacity of 1634 cc / 100 cu-in. The cooling system

The post Victory Kingpin (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin Low motorcycle was produced in 2009-10 with a four-stroke, 50 degrees V twin SOHC engine and a capacity of 1634 cc / 100 cu-in. The cooling system is air/oil, and the compression ratio is 9.8:1. The bike has electronic fuel injection with 44mm throttle bodies and starts electrically with a 12-volt/18-amp-hour battery. The clutch is wet with a multi-plate system, and the transmission is six-speed with a final drive of carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork with a front wheel travel of 130 mm / 5.1 in, while the rear suspension is single, mono-tube gas forged and cast aluminum w/ rising-rate linkage with a rear wheel travel of 100 mm / 3.9 in. The front and rear brakes are single 300mm floating rotors with four piston calipers and two piston calipers, respectively. The front and rear tires are 130/70-21 and 180/55 B18, respectively, and the seat height is 640 mm / 25.1 in. The GVWR is 549 kg / 1210 lbs, the dry weight is 297 kg / 654 lbs, and the fuel capacity is 17 litres / 4.5 US gal.

Technical specifications:

Make Model: Victory Kingpin Low

Year: 2009 – 10
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 640 mm / 25.1 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin (2006-07) https://motorcyclespecifications.com/victory-kingpin-2006-07-specs/ Fri, 24 Mar 2023 17:25:59 +0000 https://motorcyclespecifications.com/?p=29809 The Victory Kingpin is a powerful, high-capacity cruiser motorcycle with a 1634cc V-twin engine and 6-speed transmission. It has a sleek design with air/oil cooling and electronic fuel injection. The

The post Victory Kingpin (2006-07) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin is a powerful, high-capacity cruiser motorcycle with a 1634cc V-twin engine and 6-speed transmission. It has a sleek design with air/oil cooling and electronic fuel injection. The bike features a wet, multi-plate clutch and a carbon fiber reinforced belt for final drive. The suspension system includes a 43mm inverted cartridge telescopic fork and a single, mono-tube gas forged and cast aluminum rear suspension with rising-rate linkage. It has single 300mm floating rotor 4 piston caliper front brakes and a single 300mm floating rotor 2 piston caliper rear brake. The front tire size is 130/70-21 and the rear tire size is 180/55 B18. The seat height is 673 mm and the bike has a GVWR of 549 kg. The dry weight of the bike is 297 kg and the fuel capacity is 17 liters. Overall, the Victory Kingpin is a powerful and stylish motorcycle with a range of advanced features for optimal performance and handling.

Technical specifications:

Make Model: Victory Kingpin

Year: 2006 – 07
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2006-07) appeared first on MotorcycleSpecifications.com.

]]> Victory Kingpin (2008-09) https://motorcyclespecifications.com/victory-kingpin-2008-09-specs/ Fri, 24 Mar 2023 15:43:10 +0000 https://motorcyclespecifications.com/?p=29712 The Victory Kingpin motorcycle from 2008-09 has a four-stroke, 50-degree V-twin engine with a capacity of 1634cc. It also features electronic fuel injection, a wet multi-plate clutch, and a six-speed

The post Victory Kingpin (2008-09) appeared first on MotorcycleSpecifications.com.

]]> The Victory Kingpin motorcycle from 2008-09 has a four-stroke, 50-degree V-twin engine with a capacity of 1634cc. It also features electronic fuel injection, a wet multi-plate clutch, and a six-speed transmission. The front suspension is a telescopic fork with 130mm of travel, while the rear suspension is a single mono-tube gas forged and cast aluminum with a rising-rate linkage, providing 100mm of travel. The front and rear brakes each have a single 300mm floating rotor, with a four-piston caliper and a two-piston caliper, respectively. The bike has a seat height of 673mm and a dry weight of 297kg. It has a fuel capacity of 17 liters and comes with a carbon fiber reinforced belt final drive. Overall, the Kingpin has a GVWR of 549kg and 1210lb.

Technical specifications:

Make Model: Victory Kingpin

Year: 2008 – 09
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Kingpin (2008-09) appeared first on MotorcycleSpecifications.com.

]]>