Victory High-Ball Archives - MotorcycleSpecifications.com

Victory High-Ball (2016)

admin — Fri, 07 Apr 2023 13:16:57 +0000

The 2016 Victory High-Ball motorcycle has a 1731cc engine with a 50-degree V twin and SOHC. It has a split dual exhaust with crossover, electronic fuel injection with dual 45mm throttle bodies, and a carbon fiber reinforced belt final drive. The front suspension is a 43mm conventional telescopic fork with a front wheel travel of 130mm, while the rear suspension is a single mono-tube gas cast aluminum with rising rate linkage and a preload adjustable spring, with a rear wheel travel of 75mm. The front brakes have two 300mm floating rotors with a 4-piston caliper and ABS, while the rear brakes have a single 300mm floating rotor with a 2-piston caliper and ABS. The bike has a length of 2372mm, wheelbase of 1647mm, seat height of 667mm, ground clearance of 120mm, GVWR of 1151lbs, dry weight of 340kg, and fuel capacity of 22 litres. The max power is 96.9hp with a max torque of 144 Nm.

Technical specifications:

Make Model: Victory Hard-Ball

Year: 2016
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Exhaust: Split dual exhaust with crossover
Oil Capacity: 4.73 L / 5.0 US Quarts
Induction: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: -Electric
Battery: 12V, 18 Ah
Max Power: 96.9 hp / 71.3 kW
Max Torque: 144 Nm / 14.6 kgf-m / 106 ft-lb
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas Cast Aluminum with rising rate linkage, Preload adjustable spring
Rear Wheel Travel: 75 mm / 3.0 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper, ABS
Rear Brakes: Single 300mm floating rotor 2 piston caliper, ABS
Front Tyre: 130/70-18 67H Dunlop 491 Elite II
Rear Tyre: 180/70-16 Dunlop Elite 3
Rake: 32 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2372 mm / 93.4 in
Wheelbase: 1647 mm / 64.8 in
Seat Height: 667 mm / 26.2 in
Ground Clearance: 120 mm / 4.7 in
GVWR: 1151 lbs / 523 kg
Dry Weight: 340 kg / 751 lbs
Fuel Capacity: 22 Litres / 5.8 US gal

The post Victory High-Ball (2016) appeared first on MotorcycleSpecifications.com.

Victory High-Ball (2015-16)

admin — Sun, 02 Apr 2023 11:15:09 +0000

The Victory High-Ball (2015-16) bike model is a gunner bobber with a four-stroke, 50-degree V twin SOHC engine that has 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike has a capacity of 1731cc/106 cu-in with a bore of 101 x 108 mm. It uses an air/oil cooling system, has a compression ratio of 9.4:1 and an oil capacity of 5.0 qts/4.73ltr. The bike has staggered dual exhaust with crossover and an electronic fuel injection with dual 45mm throttle body. The engine delivers a max power of 81 hp/60.4 kW @ 4810 rpm and max torque of 96 lb-ft/130 Nm @ 2920 rpm. The bike’s clutch is a wet, multi-plate system, and the transmission is a 6-speed drive. It has a carbon-fiber-reinforced belt as the final drive, and the front suspension employs a 43mm conventional telescopic fork, and the rear suspension is a single mono-tube gas, cast aluminum with rising-rate linkage, and a preload-adjustable spring. Braking is conventional, with a single 300 x 5mm/floating rotor/4 piston calipers for the front and a single 300 x 5mm/floating rotor/2 piston caliper for the rear. The bike uses Dunlop 491 E2-RWL tyres, with 130/90 B16 67H for the front, and 140/90 B16 77H for the rear. The bike has a length of 93.4 in/2372 mm, a wheelbase of 64.8 in/1647 mm, a seat height of 658 mm/25.9 in, and a ground clearance of 4.7 in/120 mm. The dry weight of the bike is 25.0 in/635 mm, with a GVWR of 1151 lbs/523 kg, and a fuel capacity of 17 litres/4.5 US gal.

Technical specifications:

Make Model: Victory Gunner Bobber

Year: 2015 – 16
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Induction: Electronic Fuel Injection with dual 45mm throttle body
Starting: Electric
Charging System: 48 amps max output
Battery: 12 volts / 18 amp hours
Max Power: 81 hp / 60.4 kW @ 4810 rpm
Max Torque: 96 lb-ft / 130 Nm @ 2920 rpm
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Conventional telescopic fork,
Front Wheel Travel: 5.1 in / 130 mm
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Rear Wheel Travel: 3.0 in / 75 mm
Brake System Type: Conventional
Front Brakes: Single 300 x 5mm/Floating Rotor/4 Piston Calipers
Rear Brakes: Single 300 x 5mm/Floating Rotor/2 Piston Caliper
Front Tyre: 130/90 B16 67H Dunlop 491 E2-RWL
Front Wheel: 16 x 3.5 in
Rear Tyre: 140/90 B16 77H Dunlop 491 E2-RWL
Rear Wheel: 16 x 3.5 in
Rake: 32 degrees
Dimensions: Length 93.4 in / 2372 mm
Wheelbase: 64.8 in / 1647 mm
Seat Height: 658 mm / 25.9 in
Ground Clearance: 4.7 in / 120 mm
Dry Weight: 25.0 in / 635 mm
GVWR: 1151 lbs / 523 kg
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory High-Ball (2015-16) appeared first on MotorcycleSpecifications.com.

Victory High-Ball (2013-14)

admin — Wed, 29 Mar 2023 01:59:56 +0000

The Victory High-Ball (2013-14) motorcycle has a 1731cc, 50-degree V twin SOHC engine with four valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike is air and oil cooled, with an electronic fuel injection system and dual 45mm throttle body. Its maximum output is 81 hp at 4810 rpm, and it has a final drive of a carbon fiber reinforced belt. The motorcycle has conventional telescopic fork front suspension, a single mono-tube gas, cast aluminum rear suspension, and 2x 300mm floating rotor and 4 piston caliper front brakes. The rear brakes consist of a single floating rotor and 2 piston caliper. It has Dunlop Cruisemax 130/90-16 67H front tires and a 150/80-16 71H rear tire, a seat height of 658 mm / 25.9 in, dry weight of 300 kg / 659 lbs, and a fuel capacity of 17 litres / 4.5 US gal.

Technical specifications:

Make Model: Victory Judge

Year: 2013 – 14
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Induction: Electronic Fuel Injection with dual 45mm throttle body
Starting: Electric
Charging System: 48 amps max output
Battery: 12 volts / 18 amp hours
Max Power: 81 hp @ 4810 rpm
Max Torque: 96 lb-ft @ 2920 rpm
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Conventional telescopic fork,
Front Wheel Travel: 5.1 in / 130 mm
Rear Suspension: Single, mono-tube gas Cast Aluminum with rising rate linkage, Preload adjustable spring,
Rear Wheel Travel: 3.0 in / 75 mm
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/90-16 67H Dunlop Cruisemax
Rear Tyre: 150/80-16 71H Dunlop Cruisemax
Seat Height: 658 mm / 25.9 in
Dry Weight: 300 kg / 659 lbs
GVWR: 522 kg / 1151 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory High-Ball (2013-14) appeared first on MotorcycleSpecifications.com.

Victory High-Ball (2015-16)

admin — Wed, 29 Mar 2023 01:23:59 +0000

The Victory High-Ball is a motorcycle model from 2015-16. It features a four-stroke, 50-degree V-twin engine with a capacity of 1731cc or 106 cu-in. The engine has a self-adjusting cam chain and hydraulic lifters. The bike has a maximum power of 81 hp at 4810 rpm and a maximum torque of 96 lb-ft at 2920 rpm. It has a six-speed transmission and a carbon fiber reinforced belt for the final drive. The front suspension features a 43mm conventional telescopic fork with a travel of 5.1 inches or 130 mm, while the rear suspension is a single mono-tube gas cast aluminum with rising rate linkage, preload adjustable spring, and a travel of 3.0 inches or 75 mm. The front and rear brakes are equipped with floating rotors and piston calipers. The bike has a seat height of 658 mm or 25.9 inches, a dry weight of 300 kg or 659 lbs, and a fuel capacity of 17 liters or 4.5 US gallons.

Technical specifications:

Make Model: Victory Judge

Year: 2015 – 16
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Induction: Electronic Fuel Injection with dual 45mm throttle body
Starting: Electric
Charging System: 48 amps max output
Battery: 12 volts / 18 amp hours
Max Power: 81 hp @ 4810 rpm
Max Torque: 96 lb-ft @ 2920 rpm
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Conventional telescopic fork,
Front Wheel Travel: 5.1 in / 130 mm
Rear Suspension: Single, mono-tube gas Cast Aluminum with rising rate linkage, Preload adjustable spring,
Rear Wheel Travel: 3.0 in / 75 mm
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/90-16 67H Dunlop Cruisemax
Rear Tyre: 150/80-16 71H Dunlop Cruisemax
Seat Height: 658 mm / 25.9 in
Dry Weight: 300 kg / 659 lbs
GVWR: 522 kg / 1151 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory High-Ball (2015-16) appeared first on MotorcycleSpecifications.com.

Victory High-Ball (2014-15)

admin — Mon, 27 Mar 2023 05:02:03 +0000

The Victory High-Ball is a motorcycle produced in 2014 and 2015. It has a four-stroke, 106 cubic inch V-twin engine with a capacity of 1731cc. The cooling system is air/oil cooled, and it has a compression ratio of 9.4:1. The bike has a split dual exhaust with crossover, electronic fuel injection with dual 45mm throttle bodies, and an electric starting system. The maximum power output is 96.9 horsepower and 144 Nm of torque. The clutch is wet, multi-plate, and the transmission has six speeds with a carbon fiber reinforced belt final drive. The front suspension is a conventional telescopic fork of 43mm, and the rear suspension is a single mono-tube gas cast aluminum with rising rate linkage, preload adjustable spring. The front wheel travel is 130mm and the rear wheel travel is 75mm. Braking is handled by a dual front rotor, four-piston caliper with ABS, and a single rear rotor, two-piston caliper with ABS. The front and rear tires are Dunlop, with the front being 130/70-18 67H Dunlop 491 Elite II, and the rear is 180/70-16 Dunlop Elite 3. The bike has a rake of 32 degrees and a trail of 170mm. Its length is 2372mm, the wheelbase is 1647mm, the seat height is 667mm, and the ground clearance is 120mm. The GVWR is 1151 pounds, and the dry weight is 751 pounds. Lastly, the fuel capacity is 22 liters or 5.8 US gallons.

Technical specifications:

Make Model: Victory Hard-Ball

Year: 2014 – 15
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Exhaust: Split dual exhaust with crossover
Oil Capacity: 4.73 L / 5.0 US Quarts
Induction: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: -Electric
Battery: 12V, 18 Ah
Max Power: 96.9 hp / 71.3 kW
Max Torque: 144 Nm / 14.6 kgf-m / 106 ft-lb
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas Cast Aluminum with rising rate linkage, Preload adjustable spring
Rear Wheel Travel: 75 mm / 3.0 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper, ABS
Rear Brakes: Single 300mm floating rotor 2 piston caliper, ABS
Front Tyre: 130/70-18 67H Dunlop 491 Elite II
Rear Tyre: 180/70-16 Dunlop Elite 3
Rake: 32 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2372 mm / 93.4 in
Wheelbase: 1647 mm / 64.8 in
Seat Height: 667 mm / 26.2 in
Ground Clearance: 120 mm / 4.7 in
GVWR: 1151 lbs / 523 kg
Dry Weight: 340 kg / 751 lbs
Fuel Capacity: 22 Litres / 5.8 US gal

The post Victory High-Ball (2014-15) appeared first on MotorcycleSpecifications.com.

Victory High-Ball (2012-13)

admin — Sun, 26 Mar 2023 20:27:09 +0000

The Victory High-Ball, also known as the Hard-Ball, is a motorcycle model produced between 2012 and 2013. It has a four-stroke, 50-degree V-twin SOHC engine with 1731cc/106 cu-in capacity, self-adjusting cam chains, and hydraulic lifters. The bike is air/oil-cooled and has a compression ratio of 9.4:1. The exhaust system consists of split dual exhaust with crossover. The engine is fed through electronic fuel injection with dual 45mm throttle bodies and has a 12V, 18 Ah battery. The maximum power generated by the engine is 96.9 hp/71.3 kW, and the maximum torques are 144 Nm/14.6 kgf-m/106 ft-lb. The bike has a six-speed transmission system with a carbon fiber reinforced belt for the final drive. The suspension system has a 43mm conventional telescopic fork at the front and a single mono-tube gas cast aluminum with rising rate linkage and preload adjustable spring at the rear. The bike has a front wheel travel of 130 mm/5.1 in and a rear wheel travel of 75 mm/3.0 in. The front brakes consist of two 300mm floating rotors with four-piston calipers, and the rear brake consists of a single 300mm floating rotor with a two-piston caliper. The bike has a wheelbase of 1647 mm/64.8 in and a seat height of 667 mm/26.2 in. It has a fuel capacity of 22 liters/5.8 US gal and weighs around 340 kg/751 lbs when dry. The bike is designed with a rigid suspension for better control and handling.

Technical specifications:

Make Model: Victory Hard-Ball

Year: 2012 – 13
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Exhaust: Split dual exhaust with crossover
Oil Capacity: 4.73 L / 5.0 US Quarts
Induction: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: -Electric
Battery: 12V, 18 Ah
Max Power: 96.9 hp / 71.3 kW
Max Torque: 144 Nm / 14.6 kgf-m / 106 ft-lb
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas Cast Aluminum with rising rate linkage, Preload adjustable spring
Rear Wheel Travel: 75 mm / 3.0 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper, ABS
Rear Brakes: Single 300mm floating rotor 2 piston caliper, ABS
Front Tyre: 130/70-18 67H Dunlop 491 Elite II
Rear Tyre: 180/70-16 Dunlop Elite 3
Rake: 32 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2372 mm / 93.4 in
Wheelbase: 1647 mm / 64.8 in
Seat Height: 667 mm / 26.2 in
Ground Clearance: 120 mm / 4.7 in
GVWR: 1151 lbs / 523 kg
Dry Weight: 340 kg / 751 lbs
Fuel Capacity: 22 Litres / 5.8 US gal

The post Victory High-Ball (2012-13) appeared first on MotorcycleSpecifications.com.