Victory Hammer Archives - MotorcycleSpecifications.com

Victory Hammer (2010)

admin — Mon, 03 Apr 2023 23:03:03 +0000

The Victory Hammer 8-Ball motorcycle was manufactured in 2010 with a 1634 cc, air/oil cooled, 50 degree V-twin SOHC engine. The electronic fuel injection system used dual 45 mm throttle bodies, and the compression ratio was 8.7:1. The clutch was wet and multi-plate, and the bike had a 5-speed transmission with a carbon fiber reinforced belt drive. The front suspension was an inverted cartridge telescopic fork, 43mm in diameter, with 5.1 inches of wheel travel. The rear suspension was single, a mono-tube gas cast aluminum with rising rate linkage, with 3.0 inches/76mm of travel and preload adjustable spring. The front brakes were a single 300mm floating rotor 4 piston caliper, and the back brakes were a single 300mm floating rotor 2 piston caliper. The front tire was a 130/70R18, and the rear tire was a 250/40R18. The seat height was 660 mm/26 inches, and the dry weight was 305 kg/672 lbs. The fuel capacity was 17 liters/4.5 gallons.

Technical specifications:

Make Model: Victory Hammer 8-Ball

Year: 2010
Engine: Air / oil, , four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634
Bore x Stroke: 101 x 102 mm
Compression Ratio: 8.7:1
Induction: Electronic Fuel Injection with dual 45 mm throttle bodies
Ignition / Starting: – / electric
Clutch: Wet, multi-plate
Max Power:
Max Torque:
Transmission / Drive: 5 Speed / Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter, 5.1 in 130 mm wheel travel
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, 3.0 in/76 mm travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18
Rear Tyre: 250/40R18
Seat Height: 660 mm / 26 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 gal

The post Victory Hammer (2010) appeared first on MotorcycleSpecifications.com.

Victory Hammer (2013-14)

admin — Fri, 31 Mar 2023 00:54:03 +0000

The Victory Hammer 8-Ball motorcycle was produced from 2013 to 2014. It features a four-stroke V-twin SOHC engine with a capacity of 1731cc, 4 valves per cylinder, and fuel injection with dual 45mm throttle body. The bike has a maximum power output of 96.9 horsepower and maximum torque of 153 Nm. The transmission is a six-speed gearbox with a carbon fiber reinforced belt for final drive. The front suspension is an inverted cartridge telescopic fork with a 43mm diameter and the rear suspension is a single, mono-tube gas, cast aluminum with rising rate linkage and preload adjustable spring. The bike has a 33-degree rake and a trail of 140mm. The dimensions of the bike are 93.8 in length, 1689mm wheelbase, and a seat height of 660mm. The dry weight is 305kg, with a fuel capacity of 17 litres. The brakes consist of a single 300mm floating rotor with a 4-piston caliper in the front and a single 300mm floating rotor with a 2-piston caliper in the rear. The Victory Hammer 8-Ball is a powerful and well-equipped motorcycle suitable for cruising and touring.

Technical specifications:

Make Model: Victory Hammer 8-Ball

Year: 2013 – 14
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc / 106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air / oil
Compression Ratio: 9.4:1
Induction: Fuel Injection with dual 45mm throttle body
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Battery: 12 volts / 18 amp hours
Starting: Electric
Clutch: Wet, multi-plate
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Primary Drive: Gear drive with torque compensator
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Rear Wheel Travel: 76 mm / 3.0 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18
Rear Tyre: 250/40R18
Rakem: 33 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.8 in / 2382 mm
Wheelbase: 1689 mm / 66.5 in
Seat Height: 660 mm / 26 in
GVWR: 532 kg / 1173 lbs
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer (2013-14) appeared first on MotorcycleSpecifications.com.

Victory Hammer (2005-06)

admin — Tue, 28 Mar 2023 18:46:06 +0000

The Victory Hammer motorcycle was produced from 2005 to 2006 and boasts a four stroke, 50 degree V twin SOHC engine with 4 valves per cylinder, with a capacity of 1634cc. It has a compression ratio of 9.8:1 and an electronic fuel injection system with 44mm throttle bodies. Starting is electric with a 12-volt/18-amp hour battery. It has a 6-speed transmission with a final drive of a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork with 130mm/5.1in wheel travel, while the rear suspension is a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage with 100mm/3.9in of wheel travel. The front brakes have 2x 300mm floating rotors with 4 piston calipers and the rear brake has a single 300mm floating rotor with a 2 piston caliper. The front wheel is 18 x 3.5 in, while the rear wheel is 18 x 8.5 in with a front tire of 130/70 R18 and a rear tire of 250/40 R18. The rake is 32.7 degrees with a trail of 140 mm/5.5 in. It has a length of 93.1 in/2,366 mm, a wheelbase of 1669 mm/65.7 in, a seat height of 660mm/26in, and a ground clearance of 135mm/5.3in. The dry weight of the motorcycle is 305kg/672 lbs with a fuel capacity of 17 litres/4.5 US gal.

Technical specifications:

Make Model: Victory Hammer

Year: 2005 – 06
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Wheel: 18 x 3.5 in
Rear Wheel: 18 x 8.5 in
Front Tyre: 130/70 R18
Rear Tyre: 250/40 R18
Rake: 32.7 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.1 in / 2,366 mm
Wheelbase: 1669 mm / 65.7 in
Seat Height: 660 mm / 26 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer (2005-06) appeared first on MotorcycleSpecifications.com.

Victory Hammer (2007-08)

admin — Mon, 27 Mar 2023 07:38:59 +0000

The Victory Hammer motorcycle was produced from 2007 to 2008 and featured a four-stroke, 50-degree V-twin engine with a capacity of 1634cc. It had a compression ratio of 9.8:1 and was cooled by air and oil. The bike also had electronic fuel injection with 44mm throttle bodies and a six-speed transmission with a carbon fiber reinforced belt final drive. Its front suspension consisted of a 43mm inverted cartridge telescopic fork, while the rear suspension was a single, mono-tube gas forged and cast aluminum with a rising-rate linkage. The bike’s front brakes featured 2x 300mm floating rotors with 4 piston calipers, and its rear brake was a single 300mm floating rotor with a 2 piston caliper. The wheels on the bike were 18 x 3.5 inches in the front and 18 x 8.5 inches in the rear, with tires measuring 130/70 R18 and 250/40 R18, respectively. The bike had a rake of 32.7 degrees, a trail of 140mm, and a ground clearance of 135mm with a dry weight of 305kg. Finally, the Victory Hammer had a fuel capacity of 17 liters (4.5 US gallons) and a seat height of 660mm.

Technical specifications:

Make Model: Victory Hammer

Year: 2007 – 08
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Wheel: 18 x 3.5 in
Rear Wheel: 18 x 8.5 in
Front Tyre: 130/70 R18
Rear Tyre: 250/40 R18
Rake: 32.7 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.1 in / 2,366 mm
Wheelbase: 1669 mm / 65.7 in
Seat Height: 660 mm / 26 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer (2007-08) appeared first on MotorcycleSpecifications.com.

Victory Hammer (2009-10)

admin — Sun, 26 Mar 2023 16:26:17 +0000

The Victory Hammer motorcycle was produced in 2009-10 and has a four-stroke, 50 degrees V twin SOHC engine with a capacity of 1634 cc / 100 cu-in. It has a compression ratio of 9.8:1 and electronic fuel injection with 44mm throttle bodies, as well as a wet, multi-plate clutch and a six-speed transmission. The final drive is a carbon fiber reinforced belt. The Hammer has a 43mm inverted cartridge telescopic fork front suspension and a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage rear suspension. The front brakes are 2x 300mm floating rotors with 4 piston calipers, while the rear brakes are a single 300mm floating rotor with a 2 piston caliper. The front wheel measures 18 x 3.5 in and the rear wheel is 18 x 8.5 in. The front tire is 130/70 R18, and the rear tire is 250/40 R18. The rake is 32.7 degrees, the trail is 140 mm / 5.5 in, and the dimensions are length 93.1 in / 2,366 mm. The wheelbase is 1669 mm / 65.7 in, and the seat height is 660 mm / 26 in. The ground clearance is 135 mm / 5.3 in, and the dry weight is 305 kg / 672 lbs. The fuel capacity is 17 litres / 4.5 US gal.

Technical specifications:

Make Model: Victory Hammer

Year: 2009 – 10
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Wheel: 18 x 3.5 in
Rear Wheel: 18 x 8.5 in
Front Tyre: 130/70 R18
Rear Tyre: 250/40 R18
Rake: 32.7 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.1 in / 2,366 mm
Wheelbase: 1669 mm / 65.7 in
Seat Height: 660 mm / 26 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer (2009-10) appeared first on MotorcycleSpecifications.com.

Victory Hammer (2011-12)

admin — Sat, 25 Mar 2023 20:21:09 +0000

The Victory Hammer (2011-12) is a powerful and stylish motorcycle with a 1731 cc V-twin engine that generates up to 96.9 hp and 153 Nm of torque. It has a fuel injection system with dual 45mm throttle body and a carbon fiber reinforced belt for final drive. The front suspension features an inverted cartridge telescopic fork, while the rear suspension is a single, mono-tube gas, cast aluminum with a rising rate linkage and preload adjustable spring. The front and rear brakes have single 300mm floating rotors with 4 piston and 2 piston calipers respectively. The motorcycle has a 130/70R18 front tyre and a 250/40R18 rear tyre. It has a rakem of 33 degrees and a trail of 140 mm. The Victory Hammer has a dry weight of 305 kg and a fuel capacity of 17 liters. It measures 93.8 inches in length, 66.5 inches in wheelbase, and has a seat height of 660 mm. The GVWR is 532 kg and ground clearance is 135 mm. All in all, the Victory Hammer is a high-performance motorcycle that delivers a thrilling ride.

Technical specifications:

Make Model: Victory Hammer 8-Ball

Year: 2011 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc / 106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air / oil
Compression Ratio: 9.4:1
Induction: Fuel Injection with dual 45mm throttle body
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Battery: 12 volts / 18 amp hours
Starting: Electric
Clutch: Wet, multi-plate
Clutch: Wet, multi-plate
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Primary Drive: Gear drive with torque compensator
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Rear Wheel Travel: 76 mm / 3.0 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18
Rear Tyre: 250/40R18
Rakem: 33 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.8 in / 2382 mm
Wheelbase: 1689 mm / 66.5 in
Seat Height: 660 mm / 26 in
GVWR: 532 kg / 1173 lbs
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer (2011-12) appeared first on MotorcycleSpecifications.com.