Sunbeam Model 7 and 7A Archives - MotorcycleSpecifications.com Find your motorcycle specifications Sat, 08 Apr 2023 02:46:30 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Sunbeam Model 7 and 7A (1922-40) https://motorcyclespecifications.com/sunbeam-model-7-and-7a-1922-40-specs/ Sat, 01 Apr 2023 23:02:57 +0000 https://motorcyclespecifications.com/?p=40917 The Sunbeam Model 7 and 7A were motorcycles produced from 1922 to 1940. They had a single cylinder, side-valve engine with a capacity of 596cc and a 4-speed transmission with

The post Sunbeam Model 7 and 7A (1922-40) appeared first on MotorcycleSpecifications.com.

]]> The Sunbeam Model 7 and 7A were motorcycles produced from 1922 to 1940. They had a single cylinder, side-valve engine with a capacity of 596cc and a 4-speed transmission with a chain final drive. The engine produced 3.2 kW or 4.25 horsepower. The frame was a single downtube cradle and the front suspension consisted of Druid forks, while the rear suspension was rigid and had a spring-loaded saddle. Both the front and rear brakes were drum brakes, and the wheels were made of steel with laced wire spokes. The motorcycle had an air-cooled system and a single exhaust. Starting was done through kicking. Source: Sunbeamsidevalve.com.

Technical specifications:

Make Model: Sunbeam Model 7 and 7A

Year: 1922 – 40
Engine: Single cylinder, side valve
Capacity: 596 cc / 36.4 cu in
Bore x Stroke: 77 x 105.5 mm
Cooling System: Air cooled
Exhaust: Single
Starting: Kick
Power: 3.2 kW / 4.25 hp
Transmission: 4-Speed
Final Drive: Chain
Frame: Single downtube cradle
Front Suspension: Druid forks
Rear Suspension: Rigid, spring loaded saddle
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Source: Sunbeamsidevalve.com

The post Sunbeam Model 7 and 7A (1922-40) appeared first on MotorcycleSpecifications.com.

]]> Sunbeam Model 7 and 7A (1934-36) https://motorcyclespecifications.com/sunbeam-model-7-and-7a-1934-36-specs/ Fri, 24 Mar 2023 11:35:58 +0000 https://motorcyclespecifications.com/?p=29577 The Sunbeam Model 7 and 7A motorcycles were produced between 1934 and 1936. The bike had a single cylinder, side valve engine with a capacity of 248 cc and a

The post Sunbeam Model 7 and 7A (1934-36) appeared first on MotorcycleSpecifications.com.

]]> The Sunbeam Model 7 and 7A motorcycles were produced between 1934 and 1936. The bike had a single cylinder, side valve engine with a capacity of 248 cc and a bore x stroke of 64 x 70 mm. It was air-cooled and had a single exhaust. The bike had a kick start and a 4-speed transmission with chain final drive. The frame was a single downtube cradle and the front suspension was Druid forks. The rear suspension was rigid with a spring-loaded saddle, and the front and rear brakes were both drum brakes. The wheels were made of steel with laced wire spokes. This information was sourced from www.sunbeamsidevalve.com.

Technical specifications:

Make Model: Sunbeam Model 16

Year: 1934 – 36
Engine: Single cylinder, side valve
Capacity: 248 cc / 15.1 cu in
Bore x Stroke: 64 x 70 mm
Cooling System: Air cooled
Exhaust: Single
Starting: Kick
Transmission: 4-Speed
Final Drive: Chain
Frame: Single downtube cradle
Front Suspension: Druid forks
Rear Suspension: Rigid, spring loaded saddle
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Source: Sunbeamsidevalve.com

The post Sunbeam Model 7 and 7A (1934-36) appeared first on MotorcycleSpecifications.com.

]]>