Sherco Archives - MotorcycleSpecifications.com

Honda XR200R (1985)

admin — Tue, 04 Apr 2023 16:07:59 +0000

The Honda XR200R motorcycle was made in 1985 and has a four-stroke, single cylinder SOHC engine with a capacity of 195cc. Its compression ratio is 10.2:1 and has 2x 20mm piston valve Keihin carburetor for induction. The ignition is solid state CD and it starts with a kick. The transmission has 6 speeds and the final drive is a chain. The front suspension has 36mm air-adjustable forks with dual Syntallic bushings while the rear suspension has a Pro-Link, single Showa shock that is adjustable. The front brakes are drum-shaped, as are the rear brakes. The motorcycle has a 3.00-21 front tire and a 110/90-17 rear tire. It has a rake of 26 degrees and a trail of 105mm/4.1in. The wheelbase is 1365mm/53.7in, the seat height is 905mm/35.6in, and dry weight is 102kg/224.8lbs whereas wet weight is 109kg/240lbs. The motorcycle has ground clearance of 315mm/12.4in and a fuel capacity of 9.0 liters/2.4 gallons.

Technical specifications:

Make Model: Honda XR 200R

Year: 1985
Engine: Four stroke, single cylinder SOHC, 2 valve
Capacity: 195 cc / 11.8 cu-in
Bore x Stroke: 67 x 56.5 mm
Compression Ratio: 10.2:1
Induction: 2x 20 mm piston valve Keihin carburator
Ignition: Solid state CD
Spark Plug: NGK DR8ES-L
Starting: Kick
Max Power:
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 2.769:1 2nd 1.941:1 3rd 1.450:1 4th 1.130:1 5th 0.923:1 6th 0.785:1
Front Suspension: 36 mm Air-adjustable forks with dual Syntallic bushings
Front Wheel Travel: 254 mm / 10.0 in
Rear Suspension: Pro-Link, single Showa shock, adjustable
Rear Wheel Travel: 238.7 mm / 9.5 in
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 110/90 -17
Rake: 26 degrees
Trail: 105 mm / 4.1 in
Wheelbase: 1365 mm / 53.7 in
Seat Height: 905 mm / 35.6 in
Dry Weight: 102 kg / 224.8 lbs
Wet-Weight: 109 kg / 240 lbs
Ground Clearance: 315 mm / 12.4 in
Fuel Capacity: 9.0 Litres / 2.4 gal

The post Honda XR200R (1985) appeared first on MotorcycleSpecifications.com.

Sherco 4.5i Enduro (2007-09)

admin — Tue, 04 Apr 2023 14:30:16 +0000

The Sherco 4.5i Enduro was a motorcycle produced between 2007 and 2009. It had a four-stroke, single-cylinder, SOHC engine with a capacity of 448.6cc. The bike was liquid-cooled and had a compression ratio of 12.0:1. It used electronic fuel injection and digital engine management through Magneti Marelli Injection. The bike was started with an electric engine starter. The motorcycle had a hydraulic, multidisc clutch and a six-speed transmission. The Sherco 4.5i Enduro had a frame made from chrome-molybdenum which formed a single structure. The front suspension consisted of an A46 mm Paioli/Kayaba telescopic fork, with a forward offset wheel axle and brake caliper. The rear suspension had a progressive system with single Paioli absorber with aluminum structure that was fully adjustable (four regulation types), linked to the center of the chassis and pushed by the swing arm through an articulated rod system. The front and rear brakes were single discs (270mm and 240mm) respectively, and the bike had a wheelbase of 1485mm. The bike’s dry weight was 109kg and its fuel capacity was 8.5L.

Technical specifications:

Make Model: Sherco 4.5i Enduro

Year: 2007 – 09
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 448.6 cc / 27.3 cu-in
Bore x Stroke: 94,5 x 64 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Induction: Electronic fuel injection/digital engine management: Magneti Marelli Injection
Lubrication: Dry sump
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: ~A46 mm Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system
Rear Wheel Travel: 295 mm / 11.6 in
Front Brakes: Single 270mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Wheelbase: 1485 mm / 58.5 in
Seat Height: 885 mm / 34.8 in
Ground Clearance: 350 mm / 13.8 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 4.5i Enduro (2007-09) appeared first on MotorcycleSpecifications.com.

Sherco 4.5i Enduro (2010)

admin — Tue, 04 Apr 2023 00:19:00 +0000

The Sherco 4.5i Enduro motorcycle was released in 2010, featuring a four-stroke single-cylinder engine with a capacity of 448.6 cc. It has a compression ratio of 12.0:1 and electronic fuel injection/digital engine management with Kokusan DC-CDI ignition. The bike starts with an electric motor, and the clutch is hydraulic and multidisc in oil bath with a six-speed transmission connected by a chain. The frame is constructed with Chrome-Molybdenum aluminum alloy, and the suspension is a progressive system with a single Paioli absorber fully adjustable and linked through a swing arm. The front suspension consists of a Paioli/Kayaba telescopic fork with a forward off-set wheel axle and brake caliper. The motorcycle has a ground clearance of 350mm/13.8in, a wheelbase of 1485mm/58.5in, and a dry weight of 109kg/240.3lbs. The fuel capacity is 8.5 liters/2.2 US gal, and it has a single disc 270mm brake on the front wheel and a single disc 240mm brake on the rear wheel. The front tire size is 90/90-21, and the rear tire size is 120/90-18. The seat height measures 885mm/34.8in, and both the front and rear wheel travels are 295mm/11.6in.

Technical specifications:

Make Model: Sherco 4.5i Enduro

Year: 2010 –
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 448.6 cc / 27.3 cu-in
Bore x Stroke: 94,5 x 64 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Induction: Electronic fuel injection/digital engine management: Magneti Marelli Injection
Lubrication: Dry sump
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: ~A46 mm Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system
Rear Wheel Travel: 295 mm / 11.6 in
Front Brakes: Single 270mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Wheelbase: 1485 mm / 58.5 in
Seat Height: 885 mm / 34.8 in
Ground Clearance: 350 mm / 13.8 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 4.5i Enduro (2010) appeared first on MotorcycleSpecifications.com.

Sherco 2.5i Enduro (2005-08)

admin — Mon, 03 Apr 2023 16:03:00 +0000

The Sherco 2.5i Enduro is a motorcycle produced between 2005 and 2008. It has a four-stroke, single-cylinder, SOHC, 4-valve engine with a capacity of 250cc. The cooling system is liquid-cooled, and the compression ratio is 12.0:1. The induction is via a Mikuni carburetor, and the ignition is through a Ducati Energia system. The bike also has an electric starter system and an additional forged aluminum kick-start lever. There is no recorded maximum power or torque output for this motorcycle. The Sherco 2.5i Enduro has a six-speed transmission with final drive through a chain. The bike’s frame is built from Chrome-Molybdenum and forms a single structure. The front suspension is handled by a Paioli 38mm diameter hydraulic telescopic fork that is fully adjustable for preload and dampening. The rear suspension is a progressive link system with a single Oll~A(c). The front brake is a single 280mm disc, while the rear brake is a single 240mm disc. The bike uses a 90/90-21 front tire and a 120/90-18 rear tire. The wheelbase is 1960mm, while the seat height is 900mm, and the ground clearance measures 305mm. The bike’s dry weight is 102kg, and its fuel capacity is 8.5 liters.

Technical specifications:

Make Model: Sherco 2.5i Enduro

Year: 2005 – 08
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 250 cc / 15.2 cu-in
Bore x Stroke: 78 x 52,2 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Induction: Mikuni Carburettor
Ignition: Ducati Energia
Starting: Electric started system and additional forged aluminium kick-start lever
Max Power: NA
Max Torque: NA
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: Paioli 38mm dia hydraulic telescope fork, fully adjustable for preload and dampening.
Front Wheel Travel: 185 mm / 11.0 in
Rear Suspension: Progressive link system with single Oll~A(c)
Front Brakes: Singe 280mm disc
Rear Brakes: Singe 240mm disc
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Wheelbase: 1960 mm / 77.2 in
Seat Height: 900 mm / 35.4 in
Ground Clearance:: 305 mm / 12.0 in
Dry Weight: 102 kg / 224.8 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 2.5i Enduro (2005-08) appeared first on MotorcycleSpecifications.com.

Sherco 5.1i Supermotard (2008)

admin — Mon, 03 Apr 2023 01:10:01 +0000

The Sherco 5.1i Enduro motorcycle was produced in 2008 and is equipped with a liquid-cooled, four-stroke, single-cylinder engine with a capacity of 510.6cc. The engine is designed with electronic fuel injection/digital engine management technology from Magneti Marelli Injection and an ignition system from Kokusan DC – CDI. The bike features a hydraulic clutch, six-speed transmission, and a chain final drive. The frame is built from Chrome-Molybdenum and designed in a single structure. The front suspension consists of a 46 Paioli/Kayaba telescopic fork with forward offset wheel axle and brake calliper. The rear suspension is a progressive system with single Paioli absorber, fully adjustable with four regulation types, linked to the centre of the chassis and pushed by the swing arm through an articulated rod system. Front and rear brakes are single 270mm and 240mm discs, respectively, with 2 piston calipers. The bike comes with a front tyre size of 3.50-17 and a rear tyre size of 5.00-17. The seat height is 900mm, and the wheelbase is 1485mm. The dry weight of the bike is 109kg, and the fuel capacity is 8.5 litres.

Technical specifications:

Make Model: Sherco 5.1i Enduro

Year: 2008 –
Engine: Liquid cooled, four stroke, single cylinder, SOHC, 4 valve
Capacity: 510.6 cc / 31.1 cu-in
Bore x Stroke: 95 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: NA
Lubrication: Dry sump
Induction: Electronic fuel injection/digital engine management: Magneti Marelli Injection
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: 46 Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper.
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system.
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 270mm disc 2 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 3.50-17
Rear Tyre: 5.00-17
Seat Height: 900 mm / 35.4 in
Wheelbase: 1485 mm / 58.5 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 5.1i Supermotard (2008) appeared first on MotorcycleSpecifications.com.

Sherco 5.1i Enduro (2008)

admin — Sun, 02 Apr 2023 23:34:56 +0000

The Sherco 5.1i Enduro motorcycle was produced in 2008 and has a liquid-cooled, single-cylinder engine with a capacity of 510.6 cc. The engine is electronically fuel-injected with digital engine management and has a Kokusan DC-CDI ignition with digital advance. The bike has a hydraulic, multidisc clutch and a six-speed transmission with a final chain drive. The frame is made from chrome-molybdenum and is a single structure. The front suspension includes a 46 Paioli/Kayaba telescopic fork and the rear suspension has a progressive system with a single Paioli absorber that is fully adjustable through four regulation types. The bike has single 270mm disc front brakes and single 240mm disc rear brakes with a front wheel travel of 295mm and a rear wheel travel of 300mm. The front tyre size is 90/90-21 and the rear tyre size is 120/90-18. The bike has a seat height of 900mm, a wheelbase of 1485mm, and a dry weight of 109kg. The fuel capacity is 8.5 litres.

Technical specifications:

Make Model: Sherco 5.1i Enduro

Year: 2008 –
Engine: Liquid cooled, four stroke, single cylinder, SOHC, 4 valve
Capacity: 510.6 cc / 31.1 cu-in
Bore x Stroke: 95 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: NA
Lubrication: Dry sump
Induction: Electronic fuel injection/digital engine management: Magneti Marelli Injection
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: 46 Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper.
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system.
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 270mm disc 2 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Seat Height: 900 mm / 35.4 in
Wheelbase: 1485 mm / 58.5 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 5.1i Enduro (2008) appeared first on MotorcycleSpecifications.com.

Sherco 2.5i Enduro 2019 (2009)

admin — Sun, 02 Apr 2023 22:38:55 +0000

The Sherco 2.5i Enduro is a 2009 motorcycle with a four-stroke, single-cylinder, SOHC, 4 valve engine and a capacity of 250 cc. It has a liquid cooling system and an electronic fuel injection induction. The frame is built from chrome-molybdenum and forms a single structure. The front suspension features a Paioli 38mm dia hydraulic telescope fork, while the rear suspension has a progressive link system with a single Oll~A(c). The Sherco 2.5i Enduro has a single 280mm disc front brake and a single 240mm disc rear brake. The front tyre size is 90/90-21, and the rear tyre size is 120/90-18. The motorcycle has a wheelbase of 1960mm and a seat height of 900mm. It also has a ground clearance of 305mm and a dry weight of 102kg. The fuel capacity of the motorcycle is 8.5 litres (2.2 US gal).

Technical specifications:

Make Model: Sherco 2.5i Enduro

Year: 2009 –
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 250 cc / 15.2 cu-in
Bore x Stroke: 78 x 52,2 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Induction: Electronic fuel injection
Ignition: Ducati Energia
Starting: Electric started system and additional forged aluminium kick-start lever
Max Power: NA
Max Torque: NA
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: Paioli 38mm dia hydraulic telescope fork, fully adjustable for preload and dampening.
Front Wheel Travel: 185 mm /
Rear Suspension: Progressive link system with single Oll~A(c)
Front Wheel Travel: 185 mm / 11.0 in
Rear Suspension: Progressive link system with single Oll~A(c)
Front Brakes: Singe 280mm disc
Rear Brakes: Singe 240mm disc
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Wheelbase: 1960 mm / 77.2 in
Seat Height: 900 mm / 35.4 in
Ground Clearance:: 305 mm / 12.0 in
Dry Weight: 102 kg / 224.8 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 2.5i Enduro 2019 (2009) appeared first on MotorcycleSpecifications.com.

Sherco City Corp 125 Enduro (2004)

admin — Sun, 02 Apr 2023 03:39:57 +0000

The Sherco City Corp 125 Enduro is a motorcycle that was manufactured in 2004. It is powered by a four-stroke, single-cylinder engine with a capacity of 124cc. The bike has a Mikuni carburetor induction system and a Ducati Energia ignition system, and it is kick-started. The clutch is a multidisc in an oil bath, and the transmission has five speeds. The final drive is through a chain. The frame is built using chrome-molybdenum and is formed into a single structure. The front suspension is taken care of by a Paioli 38mm hydraulic telescope fork that is fully adjustable for preload and dampening. The rear suspension is a progressive link system with a single Oll. The front and rear brakes consist of single 280mm and 240mm discs, respectively. The motorcycle has a 90/90-21 front tire and a 120/90-18 rear tire. The wheelbase measures 1960mm, and the seat height is 900mm. The ground clearance is 280mm, and the dry weight is 107.0kg. The fuel capacity is 7.8 liters.

Technical specifications:

Make Model: Sherco City Corp 125 Enduro

Year: 2004 –
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 54.0 x 54.0 mm
Cooling System: Air cooled
Compression Ratio: NA
Induction: Mikuni Carburettor
Ignition: Ducati Energia
Starting: Kick
Max Power: NA
Max Torque: NA
Clutch: Multidisc in oil bath
Transmission: 5 Speed
Final Drive: Chain
Frame: Built from Chrome-molybdenum forming a single structure.
Front Suspension: Paioli 38mm dia hydraulic telescope fork, 185mm travel, fully adjustable for preload and dampening.
Front Wheel Travel: 185 mm / 11.0 in
Rear Suspension: Progressive link system with single Oll~A(c)
Rear Wheel Travel: 175 mm / 6.9 in
Front Brakes: Singe 280mm disc
Rear Brakes: Singe 240mm disc
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Wheelbase: 1960 mm / 77.2 in
Seat Height: 900 mm / 35.4 in
Ground Clearance:: 280 mm / 11.0 in
Dry Weight: 107.0 kg / 235.9 lbs
Fuel Capacity: 7.8 Litres / 2.0 US gal

The post Sherco City Corp 125 Enduro (2004) appeared first on MotorcycleSpecifications.com.

Sherco Shark Replica 125 Enduro (2004)

admin — Thu, 30 Mar 2023 12:24:59 +0000

The Sherco Shark Replica 125 Enduro motorcycle was manufactured in 2004 and features a four-stroke, single-cylinder, SOHC, 4 valve engine with a 124cc capacity. The bike is air-cooled with a compression ratio that is not specified. It has a Mikuni carburetor induction and a Ducati Energia ignition, and is started with a kick. The maximum power and torque of the motorcycle are not stated. The bike has a multidisc in oil bath clutch, with a 5-speed transmission and a chain final drive. The frame is made from Chrome-molybdenum and forms a single structure, with a Paioli 38mm dia hydraulic telescope fork for front suspension and a progressive link system with a single Oll(R) for the rear suspension. The front and rear brakes consist of single 280mm and 240mm discs, respectively. The front and rear tires are 90/90 -21 and 120/90 -18, respectively. The wheelbase of the bike is 1960 mm, and the seat height is 900 mm. It has a ground clearance of 280mm and a dry weight of 107.0 kg. The fuel capacity of the bike is 7.8 litres or 2.0 US gal.

Technical specifications:

Make Model: Sherco Shark Replica 125 Enduro

The post Sherco Shark Replica 125 Enduro (2004) appeared first on MotorcycleSpecifications.com.

Sherco 4.5I Supermotard (2008)

admin — Thu, 30 Mar 2023 02:13:55 +0000

The Sherco 4.5i Supermotard motorcycle was released in 2008 and features a four-stroke, single-cylinder, SOHC, 4-valve engine with a capacity of 448.6cc. The engine is cooled by liquid and has a 12.0:1 compression ratio with electronic fuel injection/digital engine management. The frame is built from chrome-molybdenum forming a single structure. The front suspension is a 46mm Paioli/Kayaba telescopic fork with forward offset wheel axle and brake calliper. The rear suspension is a progressive system with a single Paioli absorber with an aluminium structure and is fully adjustable. The brakes are single 270mm disc at the front and single 240mm disc at the rear. The front tyre size is 3.50-17 and the rear is 5.00-17. The motorcycle has a wheelbase of 1485 mm, a seat height of 885 mm, and a ground clearance of 350 mm. The dry weight is 109 kg with a fuel capacity of 8.5 litres.

Technical specifications:

Make Model: Sherco 4.5i Supermotard

Year: 2008 –
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 448.6 cc / 27.3 cu-in
Bore x Stroke: 94,5 x 64 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Induction: Electronic fuel injection/digital engine management: Magneti Marelli Injection
Lubrication: Dry sump
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: ~A46 mm Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system
Rear Wheel Travel: 295 mm / 11.6 in
Front Brakes: Single 270mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 3.50-17
Rear Tyre: 5.00-17
Wheelbase: 1485 mm / 58.5 in
Seat Height: 885 mm / 34.8 in
Ground Clearance: 350 mm / 13.8 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 4.5I Supermotard (2008) appeared first on MotorcycleSpecifications.com.

Sherco 3.0-F Enduro (2010)

admin — Wed, 29 Mar 2023 07:32:00 +0000

The Sherco 3.0-F Enduro motorcycle was released in 2010 featuring a four-stroke, single-cylinder engine with a capacity of 290 cc. The engine comes with a DOHC and 4 valve setup and is cooled by a liquid cooling system. The motorcycle uses Magnetti Marelli Injection induction and has a dry sump lubrication system. Additionally, the motorcycle comes equipped with Kokusan DC-CDI ignition with digital advance for a reliable start. The six-speed transmission is paired with a hydraulic, multidisc clutch that is oil bathed, and the final drive is a chain system. The frame is constructed using Chrome-Molybdenum forming a single structure for added stability on rougher terrain. The front suspension is a Paioli telescopic fork with approximately 46mm tubes that are rebound and compression adjustable. The rear suspension is a Sachs progressive, multi-adjustable shock. The front brakes include a single 270mm disc and the rear brakes include a single 240mm disc. The front tire size is 90/90-21 and the rear tire size is 120/90-18. The wheelbase measures at 1485 mm while the seat height is 900 mm. The dry weight of the motorcycle is 102 kg, and the fuel capacity is 8.5 liters, equivalent to 2.2 US gallons.

Technical specifications:

Make Model: Sherco 3.0-F Enduro

Year: 2010
Engine: Four stroke, single cylinder, DOHC, 4 valve
Capacity: 290 cc / 17.7 cu-in
Bore x Stroke: 84.0 x 52.2 mm
Cooling System: Liquid cooled
Compression Ratio:
Induction: Magnetti Marelli Injection
Lubrication: Dry sump
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: Paioli telescopic fork, ~A46 mm tubes rebound and compression adjustable
Rear Suspension: Sachs progressive, multiadjustable shock
Front Brakes: Single 270mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Wheelbase: 1485 mm / 58.5 in
Seat Height: 900 mm / 35.4 in
Dry Weight: 102 kg / 224.8 lbs
Fuel Capacity: 8.5 Litres / / 2.2 US gal

The post Sherco 3.0-F Enduro (2010) appeared first on MotorcycleSpecifications.com.

Sherco City Corp 125 Supermotard (2004)

admin — Mon, 27 Mar 2023 15:54:58 +0000

The Sherco City Corp 125 Supermotard is a motorbike from 2004 with a four-stroke, single-cylinder, 124cc engine. Its bore and stroke are both 54.0mm and it is air-cooled. There is no information on the compression ratio, but it has a Mikuni carburetor and Ducati Energia ignition. The bike uses a kickstarter and has a multidisc in oil bath clutch with a five-speed transmission and chain final drive. Its front suspension has a Paioli 38mm hydraulic telescope fork, with 185mm of travel, fully adjustable for preload and dampening. The bike’s front brake has a single 280mm disc, while the rear brake is a single 240mm disc. The Sherco City Corp 125 Supermotard has a wheelbase of 1960mm, seat height of 900mm, and ground clearance of 280mm. It weighs 107.0kg and has a fuel capacity of 7.8 litres or 2.0 US gallons.

Technical specifications:

Make Model: Sherco City Corp 125 Supermotard

Year: 2004 –
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 54.0 x 54.0 mm
Cooling System: Air cooled
Compression Ratio: NA
Induction: Mikuni Carburettor
Ignition: Ducati Energia
Starting: Kick
Max Power: NA
Max Torque: NA
Clutch: Multidisc in oil bath
Transmission: 5 Speed
Final Drive: Chain
Frame: Built from Chrome-molybdenum forming a single structure.
Front Suspension: Paioli 38mm dia hydraulic telescope fork, 185mm travel, fully adjustable for preload and dampening.
Front Wheel Travel: 185 mm / 11.0 in
Rear Suspension: Progressive link system with single Oll~A(c)
Rear Wheel Travel: 175 mm / 6.9 in
Front Brakes: Singe 280mm disc
Rear Brakes: Singe 240mm disc
Front Tyre: 2.50-17
Rear Tyre: 3.00-17
Wheelbase: 1960 mm / 77.2 in
Seat Height: 900 mm / 35.4 in
Ground Clearance:: 280 mm / 11.0 in
Dry Weight: 107.0 kg / 235.9 lbs
Fuel Capacity: 7.8 Litres / 2.0 US gal

The post Sherco City Corp 125 Supermotard (2004) appeared first on MotorcycleSpecifications.com.

Sherco 4.5 Enduro (2004-06)

admin — Mon, 27 Mar 2023 12:38:02 +0000

The Sherco 4.5 Enduro motorcycle was produced from 2004 to 2006 and features a four-stroke, single-cylinder, SOHC, 4 valve engine with a displacement of 448.6cc. The bike has a Mikuni carburetor for induction and Kokusan DC-CDI ignition with digital advance for ignition. It also has an electric starter and a hydraulic, multidisc clutch. The transmission is 6-speed and the final drive is a chain.

The frame is built from Chrome-Molybdenum, forming a single structure, and the front suspension features a ~A46mm Paioli/Kayaba telescopic fork with forward offset wheel axle and brake caliper. The rear suspension is a progressive system with a single Paioli absorber with an aluminum structure and fully adjustable four regulation types.

The front brake is a single 270mm disc and the rear brake is a single 240mm disc. The wheels have a front tire size of 90/90-21 and a rear tire size of 120/90-18. The bike has a wheelbase of 1485mm and a seat height of 885mm. The ground clearance is 350mm, and it has a dry weight of 109 kg. The fuel capacity is 8.5 liters or 2.2 US gallons.

Technical specifications:

Make Model: Sherco 4.5 Enduro

Year: 2004 – 06
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 448.6 cc / 27.3 cu-in
Bore x Stroke: 94,5 x 64 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Lubrication: Dry sump
Induction: Mikuni carburetor
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: ~A46 mm Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system
Rear Wheel Travel: 295 mm / 11.6 in
Front Brakes: Single 270mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Wheelbase: 1485 mm / 58.5 in
Seat Height: 885 mm / 34.8 in
Ground Clearance: 350 mm / 13.8 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 4.5 Enduro (2004-06) appeared first on MotorcycleSpecifications.com.

Sherco 5.1 Enduro (2006-07)

admin — Sat, 25 Mar 2023 12:27:59 +0000

The Sherco 5.1 Enduro is a 2006-07 motorcycle with a liquid cooled, four stroke, single cylinder, SOHC, 4 valve engine and a capacity of 510.6 cc. The bike has a bore x stroke of 95 x 72 mm, a compression ratio of NA, and dry sump lubrication. The Mikuni carburetor and Kokusan DC-CDI ignition with digital advance are key features. It has an electric starter and a hydraulic, multidisc clutch in oil bath. The bike offers a 6-speed transmission, a chain-based final drive, and a chrome-molybdenum frame. The front and rear suspension systems offer 295 mm and 300 mm travel respectively, and the front and rear brakes are a single 270mm disc 2 piston caliper and a single 240mm disc 2 piston caliper, respectively. The bike has a seat height of 900 mm, wheelbase of 1485 mm, dry weight of 109 kg, and a fuel capacity of 8.5 litres (2.2 US gal).

Technical specifications:

Make Model: Sherco 5.1 Enduro

Year: 2006 – 07
Engine: Liquid cooled, four stroke, single cylinder, SOHC, 4 valve
Capacity: 510.6 cc / 31.1 cu-in
Bore x Stroke: 95 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: NA
Lubrication: Dry sump
Induction: Mikuni carburetor
Ignition: Kokusan DC – CDI ignition with digital advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Hydraulic, multidisc in oil bath
Transmission: 6 Speed
Final Drive: Chain
Frame: Built from Chrome-Molybdenum forming a single structure
Front Suspension: 46 Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper. , 295 mm travel
Rear Suspension: Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system. , 300 mm travel
Front Brakes: Single 270mm disc 2 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 120/90 -18
Seat Height: 900 mm / 35.4 in
Wheelbase: 1485 mm / 58.5 in
Dry Weight: 109 kg / 240.3 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal

The post Sherco 5.1 Enduro (2006-07) appeared first on MotorcycleSpecifications.com.