KTM 690 Duke (2016)

admin — Thu, 06 Apr 2023 03:54:08 +0000

The KTM 690 Duke motorcycle was released in 2016 with a 690 cc engine, single cylinder, 4-stroke, SOHC, 4-valve capacity, and a compression ratio of 12.7:1. Its maximum power is 74 horsepower at 8000 rpm and torque of 74 Nm at 6500 rpm. It has a hydraulic slipper clutch and a 6-speed transmission with a chain final drive. The frame is a chrome-moly steel Trellis frame and an aluminum powder-coated sub-frame with WP Performance System Upside Down front suspension and Pro Lever Linkage Rear Suspension. It has two-channel ABS brakes, Brembo fixed calipers, and a Bosch 9M system, as well as cast aluminum wheels and tires sized 120/70 and 160/60 for the front and rear, respectively. The motorcycle has a wheelbase of 1466mm, a ground clearance of 192mm, and a seat height of 835mm. The motorcycle weighs 148.5kg and runs on a 14-liter fuel tank. The engine is cooled by liquid and lubricated by pressure lubrication with two oil pumps. The ignition is contactless controlled fully electronic with digital ignition adjustment, and it starts with a push button. It also has Keihin EFI and throttle body 50mm for induction.

Technical specifications:

Make Model: KTM 690 Duke

Year: 2016
Engine: Single cylinder, 4-stroke, SOHC, 4-valve
Capacity: 690 cc / 42.1 cu in
Bore x Stroke: 105 x 80 mm
Compression Ratio: 12.7:1
Cooling System: Liquid cooled
Lubrication System: Pressure Lubrication with Two Oil Pumps
Induction: Keihin EFI, Throttle Body 50 mm
Spark Plugs: Inside: NGK LKAR9BI-10 Outside: NGK LMAR7DI-10
Ignition: Contactless controlled fully electronic ignition with digital ignition adjustment
Starting: Electric
Battery: CBTX9-BS 12V, 8.6Ah
Max Power: 54.4 kW / 74 hp @ 8000 rpm
Max Torque: 74 Nm / 7.5 kgf-m / 54.6 lb-ft @ 6500 rpm
Clutch: APTC slipper clutch, hydraulically operated, antihopping
Transmission: 6-Speed
Gear Ratios: 1st 14:35 / 2nd 16:28 / 3rd 21:28 / 4th 21:23 / 5th 23:22 / 6th 23:20
Final Drive: Chain, 16:40
Primary Drive: 36:79
Frame: Chrome-moly steel Trellis frame, aluminum powder coated sub-frame
Front Suspension: WP Performance Systems Upside Down 4357
Front Wheel Travel: 135 mm / 5.3″
Rear Suspension: WP Performance System emulsion with Pro Lever Linkage
Rear Wheel Travel: 135 mm / 5.3″
Front Brakes: Single 320 mm disc, Brembo 4 piston fixed caliper, Bosch 9M two channel ABS
Rear Brakes: Single 240 mm disc, Brembo single piston floating caliper, Bosch 9M two channelABS
Front Wheel: 3.50 x 17″, cast aluminium
Rear Wheel: 5.00 x 17″, cast aluminium
Front Tyre: 120/70 – ZR17 M/C 58W TL
Rear Tyre: 160/60 – ZR17 M/C 69W TL
Rake: 26.5o
Wheelbase: 1466 mm / 57.7″
Ground Clearance: 192 mm / 7.55″
Seat Height: 835 mm / 32.9″
Dry Weight: 148.5 kg / 327.4 lbs
Dry Weight: 148.5 kg / 327.4 lbs
Engine Oil Capacity: 1.7 Litres / 1.8 US qt / 1.5 Imp qt
Fuel Capacity: 14 Litres / 3.7 US gal / 3.1 Imp gal

The post KTM 690 Duke (2016) appeared first on MotorcycleSpecifications.com.

Nortom Commando 750 Roadster (1970-71)

admin — Sun, 02 Apr 2023 21:45:07 +0000

The Norton Commando 750 Roadster was a motorcycle produced from 1970-71. It had a four stroke, parallel twin cylinder engine with a capacity of 745cc and a compression ratio of 9.0:1. The maximum power output was 58 hp at 6800 rpm. The transmission was a 4-speed system and the final drive was through a chain. The front suspension was telescopic forks and the rear suspension was dual shocks. The front and rear brakes were drum systems, with the front brake being about 203mm and the rear brake about 178mm. The front and rear tires were 3.25-19 and 4.00-18 respectively. The length of the motorcycle was 2220mm, the width was 660mm and the wheelbase was 1441mm. The seat height was 863.6mm, and it had a dry weight of 195kg. The fuel capacity was 10 litres or 2.6 US gallons, and it was able to complete a standing quarter mile in 12.92 seconds.

Technical specifications:

Make Model: Norton Commando 750 Roadster

Year: 1970 – 71
Engine: Four stroke, parallel twin cylinder, push rod 2 valves per cylinder.
Capacity: 745 cc / 45.5 cu in
Bore x Stroke: 73 x 89 mm
Compression Ratio: 9.0:1
Cooling System: Air cooled
Starting: Kick
Max Power: 58 hp / 43 kW @ 6800 rpm
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks
Front Brakes: ~A203 mm Drum
Rear Brakes: ~A178 mm Drum
Front Tyre: 3.25-19
Rear Tyre: 4.00-18
Dimensions: Length 2220 mm / 87.5 in Width 660 mm / 26 in
Wheelbase: 1441 mm / 56.75 in
Seat Height: 863.6 mm / 34 in
Dry Weight: 195 kg / 430 lbs
Fuel Capacity: 10 Litres / 2.6 US gal
Standing 1/4 Mile: 12.92 sec

The post Nortom Commando 750 Roadster (1970-71) appeared first on MotorcycleSpecifications.com.

Nortom Commando 750 Roadster Archives - MotorcycleSpecifications.com

KTM 690 Duke (2016)

Technical specifications:

Nortom Commando 750 Roadster (1970-71)

Technical specifications: