Maico Enduro 500 Archives - MotorcycleSpecifications.com

Honda VFR1200 DCT (2014-15)

admin — Fri, 07 Apr 2023 12:56:58 +0000

The Honda VFR1200F DCT motorcycle was made from 2014-15 and had a liquid cooled, four-stroke engine with electronic injection and digital transistorized ignition. It had a maximum power of 127 kW and maximum torque of 129 Nm. The clutch was wet and multiplate slipper type with hydraulic operation and the transmission had six speeds with two automatic modes and manual mode. The final drive was via a shaft and it had a double beam cast aluminum vacuum mold chassis geometry direction. The front suspension was an inverted telescopic fork and the rear suspension was a Pro-Link gas shock with adjustable spring preload. Front and rear brakes featured combined ABS and it had 120/70 ZR17M/C and 190/55 ZR17M/C front and rear tires respectively. Dimensions were 2244 mm in length, 752 mm in width, and 1222 mm in height with a wheelbase of 1545 mm and a seat height of 815 mm. The weight was 267 kg and it had an 18.5 litre fuel capacity. Its average consumption was 17.8 km per litre and it had a top speed of 251.2 km/h with a standing quarter mile time of 10.8 seconds.

Technical specifications:

Make Model: Honda VFR 1200F DCT

Year: 2014 – 15
Engine: Four stroke, 76 degrees V-4, SOHC, 4 valve per cylinder
Capacity: 1237 cc / 75.4 cu-in cc / 75.4 cu-in
Bore x Stroke: 81 x 60 mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Induction: PGM-FI electronic injection
Ignition: Digital transistorized with electronic advance computerized control Ignition Timing: 6.4 degrees -10.4 degrees BTDC (idle speed) Sparkplug Type: IMR9E-9HES (NGK); VUH27ES (DENSO)
Spark Plug: IMR9E-9HES (NGK); VUH27ES (DENSO)
Starting: Electric
Max Power: 127 kW / 170 hp @ 10000 rpm
Max Torque: 129 Nm /95.1 lb-ft @ 8750 rpm
Clutch: Wet, multiplate slipper type, Clutch Operation Hydraulic
Transmission: 6 speed with two automatic modes and manual mode
Final Drive: Shaft
Gear Ratio: 1 2.600 (39/15) 2nd 1.736 (33/19) 3rd 1.363 (30/22) 4th 1.160 (29/25) 5th 1.032 (32/31) 6th 0.939 (31/33)
Chassis Type: Double beam cast aluminum vacuum mold Geometry direction: 25.5 degrees, 101 mm forward Swingarm: single-arm aluminum driveshaft
Front Suspension: Inverted telescopic fork 41 mm HMAS cartridge-type with adjustable spring preload without positions,
Front Wheel Travel: 120 mm / 4.3 in
Rear Suspension: Pro-Link HMAS gas shock, adjustable spring preload 25 positions,
Rear Wheel Travel: 120 mm / 4.3 in
Front Brakes: 2x Hydraulic discs 320mm floating, 6-piston radial calipers, Combined-ABS
Rear Brakes: Single hydraulic 276mm disc 2 piston caliper, Combined-ABS
Front Tyre: 120/70 ZR17M / C (58W)
Rear Tyre: 190/55 ZR17M / C (75W)
Rake (Caster angle): 25.3 degrees
Trail: 101.mm / 4 in
Dimensions: Length 2244 mm / 88.3 in Width 752 mm / 29.6 in Height 1222 mm / 48.1 in
Wheelbase: 1545 mm / 60.8 in
Seat Height: 815 mm / 31.9 in
Wet Weight: 267 kg / 613 lbs
Fuel Capacity: 18.5 Litres / 5.0 US gal
Average Consumption: 17.8 km/lit
Standing 1/4 Mile: 10.8 sec
Top Speed: 251.2 km/h / 156 mph

The post Honda VFR1200 DCT (2014-15) appeared first on MotorcycleSpecifications.com.

Maico Enduro 500 (1989-90)

admin — Tue, 28 Mar 2023 00:26:02 +0000

The Maico Enduro 500 is a motorcycle model from 1989 to 1990 with a capacity of 488 cc and a single cylinder, two-stroke engine. It has a 13.5:1 compression ratio, liquid cooling, and a Bing 40 carburetor. Equipped with a 12V 130W SEM ignition and a kick starter, it can produce a maximum power of 12.4 kW or 17 hp at 5600 rpm (restricted). The motorcycle features a five-speed transmission, a chain final drive, and an upswept, right-side single exhaust. The frame is made of Chrom Molybd~An Rohr material, while its suspension consists of a WP 48 at the front and MAICO Twin link Reiger shock absorbers at the rear. The brake system uses a single disc with a 260 mm, two-piston caliper at the front and a single disc with a 220 mm, single-piston caliper at the rear. The motorcycle weighs 109 kg or 240 lbs when dry and has a fuel capacity of 9.0 L or 2.6 US gal. It is available in blue and red colors and can reach a top speed of 100 km/h or 62 mph.

Technical specifications:

Make Model: Maico Enduro 500

Year: 1989 – 90
Engine: Single cylinder, two stroke
Capacity: 488cc / 29.8 cub in
Bore x Stroke: 86.5 x 83 mm
Cooling System: Liquid cooled
Compression Ratio: 13.5:1
Exhaust: Single, upswept, right side
Fuel System: Bing 40 oval carburetor
Ignition: 12V 130W SEM
Starting: Kick
Max Power: 12.4 kW / 17 hp @ 5600 rpm (restricted)
Clutch: Wet, cableoperated
Transmission: 5-Speed
Final Drive: Chain
Frame: Chrom Molybd~An Rohr
Front Suspension: WP 48
Front Wheel Travel: 305 mm / 12.0 in.
Rear Suspension: MAICO Twin link Reiger shock
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single disc, 260 mm, 2-piston caliper
Rear Brakes: Single disc, 220 mm , 1-piston caliper
Wheels: Alloy, wire spokes
Front Rim: 3.00 x 21 in.
Rear Rim: 4.60 x 18 in.
Wheelbase: 1480 mm / 58.3 in.
Ground Clearance: 388 mm / 15.3 in.
Seat Height: 930 mm / 36.6 in.
Dry Weight: 109 kg / 240 lbs
Fuel Capacity: 9.0 L / 2.6 US gal
Colours: Blue, Red
Top Speed: 100 km/h / 62 mph

The post Maico Enduro 500 (1989-90) appeared first on MotorcycleSpecifications.com.

Maico Enduro 500 (2001-14)

admin — Mon, 27 Mar 2023 13:28:06 +0000

The Maico Enduro 500 was produced from 2001-2014 and had a single cylinder, two-stroke engine with a capacity of 499cc. It had a liquid cooling system, Bing 40 oval fuel system, and 12V 130W SEM ignition with kick starting. The bike had a maximum power of 48.9 kW or 67 hp and a 5-speed transmission with wet, multi-plate clutch and final chain drive. The frame was made of chrom molybd~an rohr and had WP 48 front suspension with 305 mm of travel and MAICO Twin link Reiger shock rear suspension with 320 mm of travel. Brakes were single disc with 260 mm, 2-piston caliper at the front and single disc with 220 mm, 1-piston caliper at the rear. The bike had alloy wheels with wire spokes, 1.6 x 21 inch front rim, and 2.15 x 18 inch rear rim. The front and rear tires were 90/90-21 and 140/80-18 respectively. The bike had a wheelbase of 1480 mm or 58.3 inches, ground clearance of 388 mm or 15.3 inches, and seating height of 960 mm or 37.8 inches. It had a dry weight of 109 kg or 240 lbs and a fuel capacity of 9.5 L or 2.5 US gal. The Maico Enduro 500 received a positive review on twostrokemotocross.com.

Technical specifications:

Make Model: Maico Enduro 500

Year: 2001 – 14
Engine: Single cylinder, two stroke
Capacity: 499cc / 30.5 cub in
Bore x Stroke: 86.5 x 85 mm
Cooling System: Liquid cooled
Fuel System: Bing 40 oval
Ignition: 12V 130W SEM
Starting: Kick
Max Power: 48.9 kW / 67 hp
Clutch: Wet, multi-plate
Transmission: 5-Speed
Final Drive: Chain
Frame: Chrom Molybd~An Rohr
Front Suspension: WP 48
Front Wheel Travel: 305 mm / 12.0 in.
Rear Suspension: MAICO Twin link Reiger shock
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single disc, 260 mm, 2-piston caliper
Rear Brakes: Single disc, 220 mm , 1-piston caliper
Wheels: Alloy, wire spokes
Front Rim: 1.6 x 21 in.
Rear Rim: 2.15 x 18 in.
Front Tyre: 90/90-21
Rear Tyre: 140/80-18
Wheelbase: 1480 mm / 58.3 in.
Ground Clearance: 388 mm / 15.3 in.
Seat Height: 960 mm / 37.8 in.
Dry Weight: 109 kg / 240 lbs
Fuel Capacity: 9.5 L / 2.5 US gal
Review: Extract from Twostrokemotocross.com

The post Maico Enduro 500 (2001-14) appeared first on MotorcycleSpecifications.com.