Horex Imperator 125 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Sat, 08 Apr 2023 02:46:03 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Laverda OR600 Atlas (1990) https://motorcyclespecifications.com/laverda-or600-atlas-1990-specs/ Tue, 04 Apr 2023 15:34:00 +0000 https://motorcyclespecifications.com/?p=44494 The Laverda OR600 Atlas is a motorcycle from 1990 with a four-stroke, parallel twin cylinder engine. It has a capacity of 571.6 cc and a compression ratio of 9.1:1. The

The post Laverda OR600 Atlas (1990) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda OR600 Atlas is a motorcycle from 1990 with a four-stroke, parallel twin cylinder engine. It has a capacity of 571.6 cc and a compression ratio of 9.1:1. The bike features a Dell’Orto twin choke induction system and Bosch electronic ignition. It has a maximum power output of 50 hp at 7500 rpm and a maximum torque of 50 Nm at 4800 rpm. The transmission is six-speed and the final drive is via chain. The front suspension is air-assisted telescopic forks and the rear suspension is a single shock. The brakes are single 260mm discs with 2-piston calipers at the front and a single 230mm disc with a 1-piston caliper at the rear. The front tire is 90/90-21 and the rear tire is 130/80-17. The motorcycle has a dry weight of 151 kg and a fuel capacity of 25 liters or 6.6 US gallons.


Technical specifications:

Make Model: Laverda OR600 Atlas

Year: 1990
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180 degrees crankshaft.
Capacity: 571.6 cc / 34.8 cu-in
Bore x Stroke: 76 x 63 mm
Compression Ratio: 9.1:1
Induction: Dell’Orto twin choke
Ignition: Bosch electronic
Starting: Electric
Max Power: 50 hp / 36.4 kW @ 7500 rpm
Max Torque: 50 Nm / 36.8 lb-ft @ 4800 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Air assisted telescopic forks
Rear Suspension: Single shock
Front Brakes: Single 260mm disc 2piston calliper
Rear Brakes: Single 230mm disc 1 piston calliper
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dry Weight: 151 kg
Fuel Capacity: 25 Litres / 6.6 US gal

The post Laverda OR600 Atlas (1990) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 750 Sport (1997) https://motorcyclespecifications.com/laverda-750-sport-1997-specs/ Tue, 04 Apr 2023 06:09:05 +0000 https://motorcyclespecifications.com/?p=43972 The Laverda 750S Sport is a motorcycle with a four-stroke, parallel twin engine and DOHC with 4 valves per cylinder. It has a capacity of 747 cc and a compression

The post Laverda 750 Sport (1997) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 750S Sport is a motorcycle with a four-stroke, parallel twin engine and DOHC with 4 valves per cylinder. It has a capacity of 747 cc and a compression ratio of 11.5:1. The bike is liquid-cooled and uses twin Weber-Marelli electronic injection for its induction system. The bike has an electric starting mechanism and a maximum power of 85 hp at 9200 rpm with 75 Nm of torque at 7750 rpm. The motorcycle has a 6-speed transmission and a chain final drive. The frame of the motorcycle is made of aluminum twin beam. The Paioli Racing Inverted adjustable suspension is at the front, with Paioli Monoshock adjustable suspension at the back. The front brake has 2x 320mm discs and 4 piston calipers, while the rear brake has a single 245mm disc and 2 piston caliper. The front tyre is 120/60 ZR17 with the rear tyre at 160/60 ZR17. The motorcycle’s seat height is 770 mm, while the dry weight is 185kg, and the wet weight is 202kg. The fuel capacity of the bike is 16 litres or 4.2 US gallons. The average fuel consumption is at 15.8 km/lit, and its top speed is 217.2 km/h.


Technical specifications:

Make Model: Laverda 750S Sport

Year: 1997
Engine: Four stroke, parallel twin. DOHC, 4 valve per cylinder.
Capacity: 747 cc / 45.6 cu-in
Bore x Stroke: 83 X 69 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max power: 85 hp / 63.3 kW @ 9200 rpm
Max Power Rear Tyre: 81.6 hp / 60.8 kW @ 8100 rpm
Max Torque: 75 Nm / 55.3 lb-ft @ 7750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin beam
Front Suspension: Paioli Racing Inverted adjustable preload, rebound & compression damping
Rear Suspension: Paioli Monoshock adjustable spring preload, rebound & compression damping
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 770 mm / 30.3 in
Dry Weight: 185.0 kg / 407.9 lbs
Wet Weight: 202 kg / 445 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 15.8 km/lit
Braking 60 – 0 / 100 – 0: 13.7 m / 39.4 m
Standing 1/4 Mile: 11.9 sec / 180.8 km/h
Top Speed: 217.2 km/h

The post Laverda 750 Sport (1997) appeared first on MotorcycleSpecifications.com.

]]>
laverda 750SF (1971-73) https://motorcyclespecifications.com/laverda-750sf-1971-73-specs/ Sun, 02 Apr 2023 21:06:57 +0000 https://motorcyclespecifications.com/?p=42146 The Laverda 750SFC is a motorcycle produced from 1971 to 1973. It features a four-stroke, parallel twin-cylinder engine with 2 valves per cylinder and an air-cooled cooling system. The engine

The post laverda 750SF (1971-73) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 750SFC is a motorcycle produced from 1971 to 1973. It features a four-stroke, parallel twin-cylinder engine with 2 valves per cylinder and an air-cooled cooling system. The engine has a capacity of 744 cc and a maximum power output of 75 hp at 7400 rpm. This motorcycle has a 5-speed transmission and a final drive chain. It has front 38mm telescopic forks suspension and a dual Koni shocks preload shocks rear suspension. The front brakes consist of two 230mm drum brakes, while the rear brake is a 200mm drum brake. The front tire has a size of 3.50-18, and the rear tire has a size of 4.00-18. The wet weight is 231 kg, and the fuel tank has a capacity of 25 liters or 6.6 US gallons.


Technical specifications:

Make Model: Laverda 750SFC

Year: 1971 – 73
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Induction: 2x 36mm PHB Dell’Orto carburetors
Ignition: Bosch electronic
Starting: Electric
Max Power: 75 hp / 56 kW @ 7400 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 38mm Telescopic forks
Rear Suspension: Dual Koni shocks preload shocks
Front Brakes: 2X 230mm drum
Front Brakes: 230mm Drum
Rear Brakes: 200mm Drum
Front Tyre: 3.50-18
Rear Tyre: 4.00-18
Wet Weight: 231 kg / 509.3 lbs
Fuel Capacity: 25 Litres / 6.6 US gal

The post laverda 750SF (1971-73) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 500 Zeta (1978) https://motorcyclespecifications.com/laverda-500-zeta-1978-specs/ Sun, 02 Apr 2023 19:10:57 +0000 https://motorcyclespecifications.com/?p=42036 The Laverda 500 Zeta motorcycle was produced in 1978 and is a four stroke, parallel twin cylinder, DOHC, with 4 valves per cylinder, 497 cc capacity, and air cooled. It

The post Laverda 500 Zeta (1978) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 500 Zeta motorcycle was produced in 1978 and is a four stroke, parallel twin cylinder, DOHC, with 4 valves per cylinder, 497 cc capacity, and air cooled. It has a compression ratio of 9.0:1, a 6 speed transmission, and a chain final drive. The motorcycle has a maximum power of 44 hp at 9500 rpm and 44.7 Nm of torque at 5200 rpm. Its suspension consists of Marzocchi forks in the front and a swinging arm fork with adjustable Marzocchi shock absorbers in the rear. It has 2x 260mm discs with 2 piston calipers in the front and a single 260mm disc with 1 piston caliper in the rear. The front and rear tires are 90/90 S18 and 110/90 H18, respectively. The dry weight of the motorcycle is 172 kg/379 lbs and its fuel capacity is 14.5 liters/3.8 US gal.


Technical specifications:

Make Model: Laverda 500 Zeta

Year: 1978
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder
Capacity: 497 cc / 30.2 cu-in
Bore x Stroke: 72 x 61 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 2x 32mm Dell’Orto carburetors
Ignition: Electric CDI
Starting: Electric
Max Power: 44 hp / 32.1 kW @ 9500 rpm
Max Torque: 44.7 Nm / 33 lb-ft @ 5200 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Swinging arm fork, adjustable Marzocchi shock absorbers.
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 90/90 S18
Rear Tyre: 110/90 H18
Dry Weight: 172 kg / 379 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Laverda 500 Zeta (1978) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 650 Ghost (1995) https://motorcyclespecifications.com/laverda-650-ghost-1995-specs/ Fri, 31 Mar 2023 13:48:06 +0000 https://motorcyclespecifications.com/?p=39081 The Laverda 650 Ghost is a motorcycle model that was produced in 1995. It has a four-stroke, parallel twin-cylinder engine with a capacity of 668cc. The bike is air-cooled and

The post Laverda 650 Ghost (1995) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 650 Ghost is a motorcycle model that was produced in 1995. It has a four-stroke, parallel twin-cylinder engine with a capacity of 668cc. The bike is air-cooled and has a compression ratio of 9.0:1. Its induction system is powered by twin Weber-Marelli electronic injection, and it has a Weber-Marelli electronic ignition. The bike has a maximum power output of 70hp at 8000 rpm and a maximum torque of 60Nm at 7000 rpm. It has a six-speed transmission and a chain final drive. The front suspension is an inverted 41mm adjustable rebound and compression dampening, while the rear suspension is a monoshock adjustable spring preload, rebound, and compression dampening. The bike has 2x 320mm discs 4 piston caliper front brakes and a single 245mm disc 2 piston caliper rear brake. It has a seat height of 760mm and a wet weight of 202 kg. The fuel capacity is 16 litres, and the average consumption is 15.5 km/lit. The bike is capable of braking from 60-0 in 13.8 meters and from 100-0 in 39.6 meters. It can achieve a standing 1/4 mile in 12.4 seconds and has a top speed of 193.5 km/h. Manuals available for the bike include the 668 Sport Owners Manual, 668/Diamante parts manual legend, 650/Formula parts manual, 650/Formula parts manual legend, and 668 Strike/Ghost/Legend parts manual legend.


Technical specifications:

Make Model: Laverda 650 Ghost

Year: 1995
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: Inverted 41mm adjustable rebound and compression dampening
Rear Suspension: Monoshock adjustable spring preload, rebound and compression dampening
Front Brakes: 2x 320mm discs 4 piston caliper
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60-17
Rear Tyre: 160/60-17
Seat Height: 760 mm / 29.9 in
Wet-Weight: 202 kg / 445.3 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 15.5 km/lit
Braking 60 – 0 / 100 – 0: 13.8 m / 39.6 m
Standing 1/4 Mile: 12.4 sec / 165.5 km/h
Top Speed: 193.5 km/h
Manuals: 668 Sport Owners Manual / 668/Diamante parts manual – legend / 650/Formula parts manual / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 Strike/Ghost/Legend parts manual – legend

The post Laverda 650 Ghost (1995) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 650 Prototype (1967) https://motorcyclespecifications.com/laverda-650-prototype-1967-specs/ Thu, 30 Mar 2023 10:06:08 +0000 https://motorcyclespecifications.com/?p=37537 The Laverda 650 Prototype motorcycle was introduced in 1967 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 653. The bike had a compression ratio of 9.0:1 and

The post Laverda 650 Prototype (1967) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 650 Prototype motorcycle was introduced in 1967 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 653. The bike had a compression ratio of 9.0:1 and was fitted with 2x 28mm Dell’Orto carburetors. It had a kick start and a transmission with five speeds. The front suspension was Marzocchi telescopic forks while the rear suspension was a swinging arm dual shocks. The bike had front brakes with 2x 180mm drums and a rear drum brake. The wet weight of the bike was 218 kg, and it had a fuel capacity of unspecified size. The Laverda 650 Prototype was an early version of the Laverda model line and was later refined and improved upon in subsequent years. Users can find various parts manuals for the model online.


Technical specifications:

Make Model: Laverda 650 Prototype

Year: 1967
Engine: Four stroke, parallel twin cylinder.
Capacity: 653
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 2x 28mm Dell’Orto carburetors
Starting: Kick
Max Power:
Max Torque:
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi telescopic forks
Rear Suspension: Swinging arm dual shocks
Front Brakes: 2x 180mm drum
Rear Brakes: Drum
Front Tyre: 3.50-18
Rear Tyre: 4.00-18
Wet Weight: 218 kg
Fuel Capacity:
Manuals: 668/Diamante parts manual – legend / – legend / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 Strike/Ghost/Legend parts manual – legend

The post Laverda 650 Prototype (1967) appeared first on MotorcycleSpecifications.com.

]]>
Laverda OR600 Atlas (1988-89) https://motorcyclespecifications.com/laverda-or600-atlas-1988-89-specs/ Thu, 30 Mar 2023 05:07:56 +0000 https://motorcyclespecifications.com/?p=37252 The Laverda OR600 Atlas motorcycle was produced between 1988-89 and features a four stroke, parallel twin cylinder engine with DOHC and 4 valves per cylinder, using a Dell’Orto twin choke

The post Laverda OR600 Atlas (1988-89) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda OR600 Atlas motorcycle was produced between 1988-89 and features a four stroke, parallel twin cylinder engine with DOHC and 4 valves per cylinder, using a Dell’Orto twin choke induction and Bosch electronic ignition. It has a capacity of 571.6 cc, bore x stroke of 76 x 63 mm, and a compression ratio of 9.1:1. The motorcycle delivers a maximum power of 50 hp / 36.4 kW @ 7500 rpm and maximum torque of 50 Nm / 36.8 lb-ft @ 4800 rpm, using a six-speed transmission and chain final drive. The front suspension features air assisted telescopic forks, while the rear suspension is a single shock. It has a single 260mm disc with 2-piston calliper front brake and a single 230mm disc with 1-piston calliper rear brake. The front tyre size is 90/90-21 and the rear tyre size is 130/80-17. The dry weight of the motorcycle is 151 kg and the fuel capacity is 25 litres / 6.6 US gal.


Technical specifications:

Make Model: Laverda OR600 Atlas

Year: 1988 – 89
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180 degrees crankshaft.
Capacity: 571.6 cc / 34.8 cu-in
Bore x Stroke: 76 x 63 mm
Compression Ratio: 9.1:1
Induction: Dell’Orto twin choke
Ignition: Bosch electronic
Starting: Electric
Max Power: 50 hp / 36.4 kW @ 7500 rpm
Max Torque: 50 Nm / 36.8 lb-ft @ 4800 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Air assisted telescopic forks
Rear Suspension: Single shock
Front Brakes: Single 260mm disc 2piston calliper
Rear Brakes: Single 230mm disc 1 piston calliper
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dry Weight: 151 kg
Fuel Capacity: 25 Litres / 6.6 US gal

The post Laverda OR600 Atlas (1988-89) appeared first on MotorcycleSpecifications.com.

]]>
Laverda RGS1000 Corsa (1984) https://motorcyclespecifications.com/laverda-rgs1000-corsa-1984-specs/ Wed, 29 Mar 2023 15:07:01 +0000 https://motorcyclespecifications.com/?p=36464 The Laverda RGS1000 Corsa is a motorcycle with a four-stroke, transverse three-cylinder, DOHC, 2 valve per cylinder engine with a capacity of 981cc/59.8 cu-in. It has a compression ratio of

The post Laverda RGS1000 Corsa (1984) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda RGS1000 Corsa is a motorcycle with a four-stroke, transverse three-cylinder, DOHC, 2 valve per cylinder engine with a capacity of 981cc/59.8 cu-in. It has a compression ratio of 10.0:1 and uses three 32mm Dell’Orto carbs for induction. The bike has a maximum power output of 97 hp / 70.7 kW at 7800 rpm and a maximum torque output of 90 Nm / 66.3 lb-ft at 7000 rpm. The transmission is a 5-speed gearbox and the final drive is a chain. The front suspension features air-assisted Marzocchi forks, while the rear suspension has dual Marzocchi air-assisted forks with 5-way spring preload. The front brakes consist of two 280mm discs with dual-piston calipers, and the rear brake is a single 280mm disc with a single-piston caliper. The bike features a 100/90-18 front tire and a 120/90-18 rear tire. It has a wet weight of 253 kg / 558 lbs and a fuel capacity of 22 liters / 5.8 US gallons. The bike has an average fuel consumption of 32 mpg and can reach a top speed of 136 mph. In a group test in 1985 by Motosprint, the Laverda RGS1000 Corsa had a standing 1/4 mile time of 11.8 seconds at 112.7 mph.


Technical specifications:

Make Model: Laverda RGS1000 Corsa

Year: 1984
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 981 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: 3x 32mm Dell’Orto carbs
Ignition: Borsch electronic
Starting: Electric
Max Power: 97 hp / 70.7 kW @ 7800 rpm
Max Torque: 90 Nm / 66.3 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi air assisted forks
Rear Suspension: Dual Marzocchi air assisted forks, 5-way spring preload
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm disc 1 piston caliper
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Wet weight: 253 kg / 558 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Consumption average: 32 mpg
Braking 60 – 0 / 100 – 0: – / 130ft
Standing 1/4 Mile: 11.8 sec / 112.7 mph
Top Speed: 136 mph
Road Test: Group Test 1985 Motosprint

The post Laverda RGS1000 Corsa (1984) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 750 Carenata (1998) https://motorcyclespecifications.com/laverda-750-carenata-1998-specs/ Wed, 29 Mar 2023 04:07:58 +0000 https://motorcyclespecifications.com/?p=35851 The Laverda 750 Carenata is a motorcycle produced in 1998 with a four stroke, parallel twin engine, and a capacity of 747cc. It has a liquid cooling system, an 11.5:1

The post Laverda 750 Carenata (1998) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 750 Carenata is a motorcycle produced in 1998 with a four stroke, parallel twin engine, and a capacity of 747cc. It has a liquid cooling system, an 11.5:1 compression ratio, and twin Weber-Marelli electronic fuel injection. Its max power is 85 hp at 9200 rpm and max torque is 75 Nm at 7750 rpm. The bike has a 6-speed transmission and chain final drive. The frame is made of aluminum twin beams and the front suspension is a Paioli Racing Inverted adjustable preload, rebound, and compression damping. The rear suspension is a Paioli Monoshock adjustable spring preload, rebound, and compression damping. The front brakes consist of 2x 320mm discs with 4 piston calipers and the rear brake is a single 245mm disc with a 2 piston caliper. The bike has a seat height of 770mm, a dry weight of 189kg, and a fuel capacity of 16 liters.


Technical specifications:

Make Model: Laverda 750 Carenata

Year: 1998
Engine: Four stroke, parallel twin. DOHC, 4 valve per cylinder.
Capacity: 747 cc / 45.6 cu-in
Bore x Stroke: 83 X 69 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max power: 85 hp / 63.3 kW @ 9200 rpm
Max Power Rear Tyre: 81.6 hp / 60.8 kW @ 8100 rpm
Max Torque: 75 Nm / 55.3 lb-ft @ 7750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin beam
Front Suspension: Paioli Racing Inverted adjustable preload, rebound & compression damping
Rear Suspension: Paioli Monoshock adjustable spring preload, rebound & compression damping
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 770 mm / 30.3 in
Dry Weight: 189 kg /
Dry Weight: 189 kg / 416 lbs
Fuel Capacity (res): 16 Litres / 4.2 US gal

The post Laverda 750 Carenata (1998) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 650 Lynx (2000) https://motorcyclespecifications.com/laverda-650-lynx-2000-specs/ Wed, 29 Mar 2023 00:01:58 +0000 https://motorcyclespecifications.com/?p=35622 The Laverda 650 Lynx is a motorcycle model from 2000. It features a four-stroke 90-degree V-twin engine with a capacity of 645 cc, and a liquid cooling system. The bike

The post Laverda 650 Lynx (2000) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 650 Lynx is a motorcycle model from 2000. It features a four-stroke 90-degree V-twin engine with a capacity of 645 cc, and a liquid cooling system. The bike has a maximum power of 69.8 hp and maximum torque of 61.7 Nm, and is equipped with a six-speed transmission and chain-driven final drive. Its suspension includes non-adjustable 45mm forks at the front and a monoshock with adjustable spring preload, rebound, and compression dampening at the rear. The brakes consist of two 320mm discs with 4-piston calipers at the front and a single 245mm disc with a 2-piston caliper at the rear. The front and rear tires are sized at 120/60-17 and 160/60-17, respectively, with a wheelbase of 1410 mm and a seat height of 770 mm. The dry weight of the bike is 181.0 kg, while its wet weight is 207 kg, and the fuel capacity is 16 liters.


Technical specifications:

Make Model: Laverda 650 Lynx

Year: 2000
Engine: Four stroke, 90 degrees V-twin, DOHC, 8 valve
Capacity: 645 cc / 39.3 cu-in
Bore x Stroke: 81 x 62.6 mm
Cooling System: Liquid cooled
Compression Ratio:
Induction: 2 x Mikuni BDSR39 carburetors
Ignition: Digital CDI
Starting: Electric
Max Power: 69.8 hp / 50.9 kW @ 9000 rpm
Max Torque: 61.7 Nm / 45.7 lb-ft @ 7400 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 45mm forks non adjustable, cartridge type
Rear Suspension: Monoshock adjustable spring preload, rebound and compression dampening
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60-17
Rear Tyre: 160/60-17
Wheelbase: 1410 mm / 55.5 in
Seat Height: 770 mm / 30.3 in
Dry Weight: 181.0 kg / 399 lbs
Wet Weight: 207 kg / 456 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Laverda 650 Lynx (2000) appeared first on MotorcycleSpecifications.com.

]]>
Horex Imperator 125 (1997) https://motorcyclespecifications.com/horex-imperator-125-1997-specs/ Tue, 28 Mar 2023 13:21:56 +0000 https://motorcyclespecifications.com/?p=35028 The Horex Imperator 125 is a motorcycle produced in 1997. It has a four-stroke, single-cylinder engine with a capacity of 124 xcc / 7.6 cu-in. The bike is air-cooled, has

The post Horex Imperator 125 (1997) appeared first on MotorcycleSpecifications.com.

]]>
The Horex Imperator 125 is a motorcycle produced in 1997. It has a four-stroke, single-cylinder engine with a capacity of 124 xcc / 7.6 cu-in. The bike is air-cooled, has a carburetor, and requires a kick start. It can reach a maximum power of 9.0 hp / 6.6 kW @ 5-speed transmission. The front suspension and rear suspension are both unspecified, and the front brakes have a single disc while the rear brakes have a drum. The front and rear tires measure 2.75-18 and 3.00-18, respectively, and the bike weighs 111.0 kg / 244.7 lbs. The fuel capacity is not provided.


Technical specifications:

Make Model: Horex Imperator 125

Year: 1997
Engine: Four stroke, single cylinder.
Capacity: 124 xcc / 7.6 cu-in
Bore x Stroke:
Cooling System: Air cooled
Compression Ratio:
Induction: Carburetor
Starting: Kick
Max Power: 9.0 hp / 6.6 kW @
Transmission: 5 Speed
Final Drive: Chain
Front Suspension:
Rear Suspension:
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre:
Rear Tyre:
: 740 mm / 29.1 in
Weight: 111.0 kg / 244.7 lbs
Fuel Capacity:

The post Horex Imperator 125 (1997) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 650 Ghost Strike (1996) https://motorcyclespecifications.com/laverda-650-ghost-strike-1996-specs/ Tue, 28 Mar 2023 06:34:04 +0000 https://motorcyclespecifications.com/?p=34642 The Laverda 650 Ghost Strike is a motorcycle produced in 1996 with a four-stroke, parallel twin cylinder engine. It has a capacity of 668 cc and a compression ratio of

The post Laverda 650 Ghost Strike (1996) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 650 Ghost Strike is a motorcycle produced in 1996 with a four-stroke, parallel twin cylinder engine. It has a capacity of 668 cc and a compression ratio of 9.0:1. The bike uses twin Weber-Marelli electronic injection for induction and ignition. It has a maximum power output of 70 hp at 8000 rpm and a maximum torque of 60 Nm at 7000 rpm. The bike uses a 6-speed transmission and a chain final drive.

The front suspension is inverted with 41mm adjustable rebound and compression dampening, while the rear suspension is a monoshock with adjustable spring preload, rebound, and compression dampening. Brakes consist of twin 320mm discs with 4 piston calipers in the front and a single 245mm disc with a 2 piston caliper in the rear.

The Laverda 650 Ghost Strike has a seat height of 760 mm and weighs 202 kg with a fuel capacity of 16 liters. The bike has an average fuel consumption of 15.5 km/lit and can reach a top speed of 193.5 km/h. The braking distance from 60-0 mph is 13.8 meters and the standing 1/4 mile takes 12.4 seconds at 165.5 km/h. Manuals available for the bike include the 668 Sport Owners Manual, 668/Diamante parts manual – legend, 650/Formula parts manual, and 668 Strike/Ghost/Legend parts manual – legend.


Technical specifications:

Make Model: Laverda 650 Ghost Strike

Year: 1996
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: Inverted 41mm adjustable rebound and compression dampening
Rear Suspension: Monoshock adjustable spring preload, rebound and compression dampening
Front Brakes: 2x 320mm discs 4 piston caliper
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60-17
Rear Tyre: 160/60-17
Seat Height: 760 mm / 29.9 in
Wet Weight: 202 kg / 445.3 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 15.5 km/lit
Braking 60 – 0 / 100 – 0: 13.8 m / 39.6 m
Standing 1/4 Mile: 12.4 sec / 165.5 km/h
Top Speed: 193.5 km/h
Manuals: 668 Sport Owners Manual / 668/Diamante parts manual – legend / 650/Formula parts manual / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 St rike/Ghost/Legend parts manual – legend

The post Laverda 650 Ghost Strike (1996) appeared first on MotorcycleSpecifications.com.

]]>
Laverda CR 600 Cruiser (1988) https://motorcyclespecifications.com/laverda-cr-600-cruiser-1988-specs/ Tue, 28 Mar 2023 04:30:01 +0000 https://motorcyclespecifications.com/?p=34529 The Laverda CR 600 Cruiser motorcycle was produced in 1988 with a four stroke, parallel twin cylinder engine that had a capacity of 571.6cc. Equipped with Dell’Orto twin choke induction

The post Laverda CR 600 Cruiser (1988) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda CR 600 Cruiser motorcycle was produced in 1988 with a four stroke, parallel twin cylinder engine that had a capacity of 571.6cc. Equipped with Dell’Orto twin choke induction and Bosch electronic ignition, this motorcycle could reach a maximum power of 46 hp / 34 kW @ 8500 rpm and max torque of 50 Nm / 36.8 lb-ft @ 4800 rpm. Its 6-speed transmission and chain final drive allowed for a smooth ride. The CR 600’s suspensions consisted of gas-assisted telescopic forks at the front and a single shock at the rear, while its brakes consisted of 2x 280mm disc brakes at the front and a single 270mm disc at the rear. The motorcycle’s dry weight was 180kg / 416.6lbs and had a fuel capacity of 18 litres / 4.7 US gal. All of this was encompassed by a 1980s cruiser-style body design.


Technical specifications:

Make Model: Laverda CR 600 Cruiser

Year: 1988
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180 degrees crankshaft.
Capacity: 571.6 cc / 30.3 cu-in
Bore x Stroke: 76 x 63 mm
Cooling System: Air cooled
Compression Ratio: 9.1:1
Induction: Dell’Orto twin choke
Ignition: Bosch electronic
Starting: Electric
Max Power: 46 hp / 34 kW @ 8500 rpm
Max Torque: 50 Nm / 36.8 lb-ft @ 4800 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Gas assisted telescopic forks
Rear Suspension: Single shock
Front Brakes: 2x 280mm disc
Rear Brakes: Single 270mm disc
Front Tyre: 100/90 V16
Rear Tyre: 130/90 V16
Dry Weight: 180 kg / 416.6 lbs
Fuel Capacity: 18 Litres / 4.7 US gal

The post Laverda CR 600 Cruiser (1988) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 500 Sport / Roadster (1983) https://motorcyclespecifications.com/laverda-500-sport-roadster-1983-specs/ Mon, 27 Mar 2023 21:28:00 +0000 https://motorcyclespecifications.com/?p=34128 The Laverda 500 Sport/Roadster motorcycle was manufactured in 1983 with a four-stroke, parallel twin-cylinder, DOHC engine and a capacity of 497cc. It has a compression ratio of 9.0:1 and runs

The post Laverda 500 Sport / Roadster (1983) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 500 Sport/Roadster motorcycle was manufactured in 1983 with a four-stroke, parallel twin-cylinder, DOHC engine and a capacity of 497cc. It has a compression ratio of 9.0:1 and runs on an air-cooled cooling system. The bike features 2x 32mm Dell’Orto carburetors for its induction and an electric CDI ignition system. The Laverda 500 Sport/Roadster also comes with a six-speed transmission and a chain final drive. A multiplate wet clutch is included in this model. The bike has a 44 hp/32.1 kW power output @ 9500 rpm and 44.7 Nm/33 lb-ft torque @ 5200 rpm. As for the bike’s chassis and suspension, the Laverda 500 has Marzocchi forks with coil springs for the front suspension and Dual Marzocchi shocks forks coil springs with 5-way adjustable for the rear suspension. The front and rear brakes are 2x 260mm discs and a single 260mm disc, respectively. The two-wheeler has a seat height of 790mm/30.7in and wet weight of 180kg/396.8lbs, while its fuel capacity is 14.5 litres/3.8 US gal. The Laverda 500 Sport/Roadster can travel up to 105 mph with an average fuel consumption of 48 mpg. The bike is able to run 1/4 mile in 14.5 seconds.


Technical specifications:

Make Model: Laverda 500 Sport / Roadster

Year: 1983
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder
Capacity: 497 cc / 30.2 cu-in
Bore x Stroke: 72 x 61 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 2x 32mm Dell’Orto carburetors
Ignition: Electric CDI
Starting: Electric
Max Power: 44 hp / 32.1 kW @ 9500 rpm
Max Torque: 44.7 Nm / 33 lb-ft @ 5200 rpm
Transmission: 6 Speed
Final Drive: Chain
Clutch: Multiplate wet
Front Suspension: Marzocchi forks coil springs
Rear Suspension: Dual Marzocchi shocks forks coil springs, 5 way adjustable.
Front Brakes: 2x 260mm discs
Rear Brakes: Single 260mm disc
Front Tyre: 90/90 S18
Rear Tyre: 110/90 S18
Seat Height: 790 mm / 30.7 in
Wet Weight: 180 kg / 396.8 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal
Consumption Average: 48 mpg
Standing 1/4 Mile: 14.5 sec
Top Speed: 105 mph

The post Laverda 500 Sport / Roadster (1983) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 650 Formula (1995) https://motorcyclespecifications.com/laverda-650-formula-1995-specs/ Sun, 26 Mar 2023 20:57:01 +0000 https://motorcyclespecifications.com/?p=32737 The Laverda 650 Formula, produced in 1995, is a motorcycle with a four-stroke, parallel-twin-cylinder engine that has a capacity of 668cc. It features double overhead camshafts (DOHC) and four valves

The post Laverda 650 Formula (1995) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 650 Formula, produced in 1995, is a motorcycle with a four-stroke, parallel-twin-cylinder engine that has a capacity of 668cc. It features double overhead camshafts (DOHC) and four valves per cylinder. It has twin Weber-Marelli electronic injection and ignition, with a maximum power of 70hp at 8000rpm and 60Nm of torque at 7000rpm. The bike has a six-speed transmission and chain final drive. The front suspension contains 40mm WP Upside-down forks, while the rear suspension features WP rising rate adjustable preload, rebound, and damping. The braking system includes two 320mm discs with four-piston calipers in the front and a single 245mm disc with a two-piston caliper in the rear. The bike weighs180 kg (396.8 lbs) when dry, and its fuel capacity is 16 liters (4.2 US gal). The Laverda 650 Formula can reach a top speed of 131 mph and can complete a standing 1/4 mile in 12.8 seconds at 105 mph. Various manuals for this model of bike are available, including an owners manual and parts manuals.


Technical specifications:

Make Model: Laverda 650 Formula

Year: 1995
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: 40mm WP Upside-down forks, adjustable rebound and damping.
Rear Suspension: WP Rising rate adjustable preload, rebound and damping.
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 170/60 ZR17
Seat Height: 760 mm / 29.9 in
Dry Weight: 180 kg / 396.8 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Standing 1/4 Mile: 12.8 sec / 105 mph
Top Speed: 131 mph
Manuals 668 Sport Owners Manual / 668/Diamante parts manual – legend / 650/Formula parts manual / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 Strike/Ghost/Legend parts manual – legend:

The post Laverda 650 Formula (1995) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 668 Black Strike (1997) https://motorcyclespecifications.com/laverda-668-black-strike-1997-specs/ Sun, 26 Mar 2023 03:00:17 +0000 https://motorcyclespecifications.com/?p=31711 The Laverda 668 Black Strike is a motorcycle model from the Italian manufacturer Laverda, released in 1997. It features a 668cc four-stroke parallel twin-cylinder engine, with DOHC and 4 valves

The post Laverda 668 Black Strike (1997) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 668 Black Strike is a motorcycle model from the Italian manufacturer Laverda, released in 1997. It features a 668cc four-stroke parallel twin-cylinder engine, with DOHC and 4 valves per cylinder. The engine is cooled by a combination of air and oil. The bike has an electronic fuel injection system and ignition, manufactured by Weber-Marelli. It has a maximum power output of 70 horsepower at 8000 rpm, and a peak torque of 60 Nm at 7000 rpm. The motorcycle has a six-speed transmission and a chain final drive. The front suspension is comprised of 40mm WP upside-down forks with adjustable rebound and damping, while the rear features WP rising rate adjustable preload, rebound, and damping. The front brakes consist of two 320mm discs with four-piston calipers, while the rear brake has a single 245mm disc with a two-piston caliper. The bike is equipped with 120/70 ZR17 and 170/60 ZR17 tires for the front and rear respectively, and weighs 180kg (396.8 lbs) when dry. It has a fuel capacity of 16 liters (4.2 US gallons).


Technical specifications:

Make Model: Laverda 668 Black Strike

Year: 1997
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: 40mm WP Upside-down forks, adjustable rebound and damping.
Rear Suspension: WP Rising rate adjustable preload, rebound and damping.
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 170/60 ZR17
Dry Weight: 180 kg / 396.8 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Laverda 668 Black Strike (1997) appeared first on MotorcycleSpecifications.com.

]]>
Laverda OR600 Atlas (1986-87) https://motorcyclespecifications.com/laverda-or600-atlas-1986-87-specs/ Sat, 25 Mar 2023 18:55:16 +0000 https://motorcyclespecifications.com/?p=31251 The Laverda OR600 Atlas motorcycle was produced from 1986-87 and featured a four-stroke, parallel twin cylinder engine with a capacity of 571.6 cc. The engine had four valves per cylinder,

The post Laverda OR600 Atlas (1986-87) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda OR600 Atlas motorcycle was produced from 1986-87 and featured a four-stroke, parallel twin cylinder engine with a capacity of 571.6 cc. The engine had four valves per cylinder, 180 degree crankshaft, and utilized Dell’Orto twin choke induction and Bosch electronic ignition. The motorcycle had a maximum power output of 50 horsepower at 7500 rpm and maximum torque of 50 Nm at 4800 rpm. It had a six-speed transmission and chain final drive. The front suspension featured air assisted telescopic forks and the rear suspension was a single shock. The motorcycle had front and rear disc brakes, with the front brake having a diameter of 260mm and the rear brake having a diameter of 230mm. The front tire was a 90/90-21 and the rear tire was a 130/80-17. The dry weight was 151 kg and the fuel capacity was 25 liters or 6.6 US gallons.


Technical specifications:

Make Model: Laverda OR600 Atlas

Year: 1986 – 87
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180 degrees crankshaft
Capacity: 571.6 cc / 34.8 cu-in
Bore x Stroke: 76 x 63 mm
Compression Ratio: 9.1:1
Induction: Dell’Orto twin choke
Ignition: Bosch electronic
Starting: Electric
Max Power: 50 hp / 36.4 kW @ 7500 rpm
Max Torque: 50 Nm / 36.8 lb-ft @ 4800 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Air assisted telescopic forks
Rear Suspension: Single shock
Front Brakes: Single 260mm disc 2piston calliper
Rear Brakes: Single 230mm disc 1 piston calliper
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dry Weight: 151 kg
Fuel Capacity: 25 Litres / 6.6 US gal

The post Laverda OR600 Atlas (1986-87) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 668 (1997) https://motorcyclespecifications.com/laverda-668-1997-specs/ Sat, 25 Mar 2023 12:09:59 +0000 https://motorcyclespecifications.com/?p=30867 The Laverda 668 Sport from 1997 is a four stroke, parallel twin cylinder motorcycle with a capacity of 668 cc. It has a compression ratio of 9.0:1 and uses a

The post Laverda 668 (1997) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 668 Sport from 1997 is a four stroke, parallel twin cylinder motorcycle with a capacity of 668 cc. It has a compression ratio of 9.0:1 and uses a wet sump for lubrication. The induction system is twin Weber-Marelli electronic injection and ignition is also electronic. The bike has a max power of 70 hp at 8000 rpm and a max torque of 60 Nm at 7000 rpm. The clutch is a wet, multiple disc type that is cable operated and the transmission has 6 speeds. The front and rear suspensions are both WP brand and have adjustable rebound and damping. Brakes are 2x 320mm discs with 4 piston calipers in the front and a single 245mm disc with a 2 piston caliper in the rear. Tires are 120/70 ZR17 in the front and 170/60 ZR17 in the rear. The motorcycle weighs 185 kg and has a fuel capacity of 16 liters or 4.2 US gallons. The seat height is 760 mm.


Technical specifications:

Make Model: Laverda 668 Sport

Year: 1997
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.0:1
Lubrication: Wet sump
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 speed
Final Drive: Chain
Front Suspension: 40mm WP Upside-down forks, adjustable rebound and damping.
Rear Suspension: WP Rising rate adjustable preload, rebound and damping.
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 170/60 ZR17
Seat Height: 760 mm / 29.9 in
Dry Weight: 185 kg / 407.8 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Laverda 668 (1997) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 750 Sport Formula (1998) https://motorcyclespecifications.com/laverda-750-sport-formula-1998-specs/ Sat, 25 Mar 2023 05:21:59 +0000 https://motorcyclespecifications.com/?p=30487 The Laverda 750 Sport Formula is a motorbike with a four stroke, parallel twin engine that has a capacity of 747cc. It has liquid cooling, a compression ratio of 11.5:1,

The post Laverda 750 Sport Formula (1998) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 750 Sport Formula is a motorbike with a four stroke, parallel twin engine that has a capacity of 747cc. It has liquid cooling, a compression ratio of 11.5:1, and twin Weber-Marelli electronic injection induction. Additionally, the bike has a 6-speed transmission, chain final drive, and a frame made of aluminum twin beam. It uses a Paioli Racing Inverted adjustable preload, rebound, and compression damping front suspension and a Paioli Monoshock adjustable spring preload, rebound, and compression damping rear suspension. The front brakes are two 320mm discs with four-piston calipers, and the rear brake is a single 245mm disc with a two-piston caliper. The front and rear tires are 120/60 ZR17 and 160/60 ZR17 respectively. The bike has a seat height of 770mm, a dry weight of 185.0 kg, and a wet weight of 202 kg. It has a fuel capacity of 16 liters and is capable of standing a quarter-mile in 11.8 seconds at 120mph. The top speed of the bike is 225.5 km/h or 139.5 mp/h.


Technical specifications:

Make Model: Laverda 750S Sport Formula

Year: 1998
Engine: Four stroke, parallel twin. DOHC, 4 valve per cylinder.
Capacity: 747 cc / 45.6 cu-in
Bore x Stroke: 83 X 69 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max power: 92 hp / 68.6 kW @ 7500 rpm
Max Torque: 82 Nm / 60.4 lb-ft @ 6500 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin beam
Front Suspension: Paioli Racing Inverted adjustable preload, rebound & compression damping
Rear Suspension: Paioli Monoshock adjustable spring preload, rebound & compression damping
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 770 mm / 30.3 in
Dry Weight: 185.0 kg / 407.9 lbs
Wet Weight: 202 kg / 445 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Standing 1/4 Mile: 11.8 sec / 120 mph
Top Speed: 225.5 km/h / 139.5 mp/h

The post Laverda 750 Sport Formula (1998) appeared first on MotorcycleSpecifications.com.

]]>
Laverda SFC 750 (1975-76) https://motorcyclespecifications.com/laverda-sfc-750-1975-76-specs/ Sat, 25 Mar 2023 04:56:00 +0000 https://motorcyclespecifications.com/?p=30462 The Laverda 750SFC was a motorcycle model produced between 1975-76 with a four stroke, parallel twin-cylinder engine and a capacity of 744cc. It featured 2 valve per cylinder, 10.5:1 compression

The post Laverda SFC 750 (1975-76) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 750SFC was a motorcycle model produced between 1975-76 with a four stroke, parallel twin-cylinder engine and a capacity of 744cc. It featured 2 valve per cylinder, 10.5:1 compression ratio, and an air-cooled cooling system. The bike came with 2x 36mm PHB Dell’Orto carburetors and a Bosch electronic ignition. It had a maximum power of 75hp / 56kW at 7400 rpm and a 5-speed transmission with a chain final drive. It was equipped with telescopic forks on the front and dual Koni shocks preload shocks on the rear. The bike had 2x 280mm discs and 2 piston calipers on the front brakes, and a single 280mm disc and 2 piston caliper on the rear. The Laverda 750SFC had a front tire of 110/90-18 and a rear tire of 120/90-18. The bike weighed 231 kg/509.3lbs and had a fuel capacity of 25 liters.


Technical specifications:

Make Model: Laverda 750SFC

Year: 1975 – 76
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Induction: 2x 36mm PHB Dell’Orto carburetors
Ignition: Bosch electronic
Starting: Electric
Max Power: 75 hp / 56 kW @ 7400 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 38mm Telescopic forks
Rear Suspension: Dual Koni shocks preload shocks
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm discs 2 piston caliper
Front Tyre: 110/90-18
Rear Tyre: 120/90-18
Wet Weight: 231 kg / 509.3 lbs
Fuel Capacity: 25 Litres

The post Laverda SFC 750 (1975-76) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 750 Diamante (1998) https://motorcyclespecifications.com/laverda-750-diamante-1998-specs/ Sat, 25 Mar 2023 00:53:04 +0000 https://motorcyclespecifications.com/?p=30233 The Laverda 750 Diamante is a motorcycle model from 1998 with a four-stroke parallel twin engine, DOHC, and 4 valves per cylinder. It has a capacity of 747 cc and

The post Laverda 750 Diamante (1998) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 750 Diamante is a motorcycle model from 1998 with a four-stroke parallel twin engine, DOHC, and 4 valves per cylinder. It has a capacity of 747 cc and a bore x stroke of 83 x 69 mm. The cooling system is liquid-cooled with a compression ratio of 11.5:1. The motorcycle uses twin Weber-Marelli electronic injection and ignition, and has electric starting. It can produce a maximum power of 85 hp at 9200 rpm, with a max power of 81.6 hp at 8100 rpm for the rear tire, and a maximum torque of 75 Nm at 7750 rpm. The transmission is a six-speed with a chain final drive. The frame is made of aluminum twin beam and the bike features Paioli Racing inverted adjustable preload, rebound and compression damping for the front suspension, and Paioli Monoshock adjustable spring preload, rebound and compression damping for the rear suspension. The front brakes consist of 2x 320mm discs with 4 piston calipers, while the rear brake has a single 245mm disc with a 2 piston caliper. The tires are 120/60 ZR17 for the front and 160/60 ZR17 for the rear, and the seat height is 770 mm. The dry weight of the motorcycle is 189 kg, and the fuel capacity is 16 liters.


Technical specifications:

Make Model: Laverda 750 Diamante

Year: 1998
Engine: Four stroke, parallel twin. DOHC, 4 valve per cylinder.
Capacity: 747 cc / 45.6 cu-in
Bore x Stroke: 83 X 69 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max power: 85 hp / 63.3 kW @ 9200 rpm
Max Power Rear Tyre: 81.6 hp / 60.8 kW @ 8100 rpm
Max Torque: 75 Nm / 55.3 lb-ft @ 7750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin beam
Front Suspension: Paioli Racing Inverted adjustable preload, rebound & compression damping
Rear Suspension: Paioli Monoshock adjustable spring preload, rebound & compression damping
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 770 mm / 30.3 in
Dry Weight: 189 kg /
Dry Weight: 189 kg / 416 lbs
Fuel Capacity (res): 16 Litres / 4.2 US gal

The post Laverda 750 Diamante (1998) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 650 Sport (1995) https://motorcyclespecifications.com/laverda-650-sport-1995-specs/ Fri, 24 Mar 2023 12:58:00 +0000 https://motorcyclespecifications.com/?p=29617 The Laverda 650 Sport is a motorcycle manufactured in 1995. It has a four-stroke, parallel twin-cylinder engine with DOHC and four valves per cylinder, producing a maximum power of 70

The post Laverda 650 Sport (1995) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 650 Sport is a motorcycle manufactured in 1995. It has a four-stroke, parallel twin-cylinder engine with DOHC and four valves per cylinder, producing a maximum power of 70 horsepower and 60 Nm of torque. The motorcycle has a six-speed transmission and a chain final drive. It features 40mm WP upside-down forks for front suspension and WP rising rate adjustable preload for the rear suspension. The Laverda 650 Sport also has a front brake with two 320mm discs and a four-piston caliper and a rear brake with a single 245mm disc and a two-piston caliper. It weighs 180kg and has a fuel capacity of 16 liters. The motorcycle can go from 0 to 60 mph in 12.8 seconds and reach a top speed of 131 mph. Manuals available for the Laverda 650 Sport include the 668 Sport owners manual, 668/Diamante parts manual-legend, 650/Formula parts manual, 650/Formula parts manual-legend, and 668 Strike/Ghost/Legend parts manual-legend.


Technical specifications:

Make Model: Laverda 650 Sport

Year: 1995
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: 40mm WP Upside-down forks, adjustable rebound and damping.
Rear Suspension: WP Rising rate adjustable preload, rebound and damping.
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 170/60 ZR17
Seat Height: 760 mm / 29.9 in
Dry Weight: 180 kg / 396.8 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Standing 1/4 Mile: 12.8 sec / 105 mph
Top Speed: 131 mph
Manuals 668 Sport Owners Manual / 668/Diamante parts manual – legend / 650/Formula parts manual / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 Strike/Ghost/Legend parts manual – legend:

The post Laverda 650 Sport (1995) appeared first on MotorcycleSpecifications.com.

]]>
Laverda 650 Sport (1994) https://motorcyclespecifications.com/laverda-650-sport-1994-specs/ Fri, 24 Mar 2023 12:26:00 +0000 https://motorcyclespecifications.com/?p=29601 The Laverda 650 Sport motorcycle was produced in 1994 and features a parallel twin-cylinder four-stroke engine with DOHC and 4 valves per cylinder. It has a capacity of 668 cc

The post Laverda 650 Sport (1994) appeared first on MotorcycleSpecifications.com.

]]>
The Laverda 650 Sport motorcycle was produced in 1994 and features a parallel twin-cylinder four-stroke engine with DOHC and 4 valves per cylinder. It has a capacity of 668 cc and a compression ratio of 9.0:1. The bike is air/oil cooled and has twin Weber-Marelli electronic injection for induction and ignition. It has a maximum power output of 70 hp at 8000 rpm, with a maximum torque of 60 Nm at 7000 rpm. The transmission is a 6-speed with a chain final drive. The front and rear suspension are both provided by WP and offer adjustable rebound and damping. The front brakes have 2x 320mm discs with 4 piston calipers and the rear brake is a single 245mm disc with a 2 piston caliper. The bike has a seat height of 760mm and a dry weight of 180kg. The fuel capacity is 16 litres and it has a top speed of 131mph, with a standing quarter-mile time of 12.8 seconds at 105 mph. There are several manuals available for this model, including an owner’s manual and multiple parts manuals.


Technical specifications:

Make Model: Laverda 650 Sport

Year: 1994
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: 40mm WP Upside-down forks, adjustable rebound and damping.
Rear Suspension: WP Rising rate adjustable preload, rebound and damping.
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 170/60 ZR17
Seat Height: 760 mm / 29.9 in
Dry Weight: 180 kg / 396.8 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Standing 1/4 Mile: 12.8 sec / 105 mph
Top Speed: 131 mph
Manuals 668 Sport Owners Manual / 668/Diamante parts manual – legend / 650/Formula parts manual / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 Strike/Ghost/Legend parts manual – legend:

The post Laverda 650 Sport (1994) appeared first on MotorcycleSpecifications.com.

]]>