Harley Davidson FXDL/I Dyna Low Rider Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 22:31:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Harley Davidson FXDL/I Dyna Low Rider (2004-05) https://motorcyclespecifications.com/harley-davidson-fxdl-i-dyna-low-rider-2004-05-specs/ Thu, 06 Apr 2023 09:46:09 +0000 https://motorcyclespecifications.com/?p=46807 The Harley Davidson FXDL/I Dyna Low Rider (2004-05) is a motorcycle with a four-stroke, 45 degree V-Twin, Twin Cam 88 engine. The engine is valve pushrod operated with hydraulic self-adjusting

The post Harley Davidson FXDL/I Dyna Low Rider (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FXDL/I Dyna Low Rider (2004-05) is a motorcycle with a four-stroke, 45 degree V-Twin, Twin Cam 88 engine. The engine is valve pushrod operated with hydraulic self-adjusting lifters and has two valves per cylinder. The capacity of the engine is 1449cc or 88.4 cu-in with a bore x stroke of 95.3 x 101.6mm. The cooling system is air cooled and the compression ratio is 8.9:1. It has a dry sump and internally mounted, crank driven gerotor pressure and dual scavenge pump with a spin on 10-A not pressurized oil filter for lubrication. The FXDL/I Dyna Low Rider has carbureted and electronic sequential port fuel injection for induction and a single-fire, non-wasted, map-controlled spark ignition. The motorcycle has five-speed transmission and a final drive of 70/32 ratio (68/32 ratio) with a belt. The frame is made from mild steel and has a tubular frame with rectangular section backbone, stamped, cast and forged junctions, forged fender supports, and MIG welded. The motorcycle has a front suspension of 39mm w/ polished aluminum fork triple clamp and dual-rate springs and a rear suspension of coil over dual shock. The front and rear brakes are both single 292mm disc. The tyre sizes for the motorcycle are D401F 100/90-19 57H for the front and D401 150/80B16 71H for the rear. The rake is 29 degrees, the fork angle is 30.5 degrees, the trail is 114.3 mm / 4.5 in, and the fuel capacity is 17.4 litres / 4.6 US gal. The length of the motorcycle is 2364.0 mm / 93.1 in, the seat height is laden2 655 mm / 25.8 in and unladen 680 mm / 26.80 in, the wheelbase is 1,625 mm / 64.0 in and the ground clearance is 142.0 mm / 5.6 in.


Technical specifications:

Make Model: Harley Davidson FXDL/I Dyna Low Rider

Year: 2004 – 05
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 88 (R) vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1449 cc / 88.4 cu-in
Bore x Stroke: 95.3 x 101.6 mm
Cooling System: Air cooled
Compression Ratio: 8.9:1
Lubrication: Dry sump, internally mounted, crank driven gerotor pressure and dual scavenge pump with spin on 10~Anot pressurized oil filter
Induction: Carburetion 40 mm constant velocity with enrichener and accelerator pump ESPFI 38 mm throttle bore electronic sequential port fuel injection
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Power: 67 hp / 48.8 kW @ 5200 rpm
Max Torque: 116.6 Nm / 86 lb-ft @ 3500rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt 70/32 ratio (68/32 ratio)
Gear rRatio: 1st 10.110 2nd 6.958 3rd 4.953 4th 3.862 5th 3.150
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 39 mm w/ polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over dual shock
Front Brakes: Single 292mm disc
Rear Brakes: Single 292mm disc
Front Tyre: D401F 100/90-19 57H
Rear Tyre: D401 150/80B16 71H
Rake: 29 degrees
Fork Angle 30.5 degrees: 30 degrees
Trail: 114.3 mm / 4.5 in
Dimensions: Length 2364.0 mm / 93.1 in
Seat Height: Laden2 655 mm / 25.8 in. Unladen 680 mm / 26.80 in.
Wheelbase: 1,625 mm / 64.0 in
Ground Clearance: 142.0 mm / 5.6 in
Fuel Capacity: 17.4 Litres / 4.6 US gal

The post Harley Davidson FXDL/I Dyna Low Rider (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
Honda CRF 1000L Africa Twin (2018) https://motorcyclespecifications.com/honda-crf-1000l-africa-twin-2018-specs/ Fri, 31 Mar 2023 19:12:00 +0000 https://motorcyclespecifications.com/?p=39373 The Honda CRF 1000L Africa Twin (2018) is a four-stroke, parallel twin motorcycle with a capacity of 998cc. It has a max power of 70kW and max torque of 98Nm,

The post Honda CRF 1000L Africa Twin (2018) appeared first on MotorcycleSpecifications.com.

]]>
The Honda CRF 1000L Africa Twin (2018) is a four-stroke, parallel twin motorcycle with a capacity of 998cc. It has a max power of 70kW and max torque of 98Nm, and is equipped with a wet, multi-plate clutch and constant mesh 6-speed manual or 6-speed Dual Clutch Transmission (DCT) with on- and off-road riding modes. The bike has a steel semi-double cradle type frame with high-tensile strength steel rear sub-frame, and features Honda Selectable Torque Control System (HSTC) with 3 levels plus switch-off (DCT/ABS model only). The front brakes are 2x 310mm floating hydraulic discs with aluminum hub and radial fit 4-piston calipers and sintered metal pads, while the rear brake is a single 256mm wave hydraulic disc with 2-piston caliper and sintered metal pads. The bike has wire spoke wheels with aluminum rims, and the front and rear wheels have different size rims and tube-type tires. The bike’s dimensions are 1475.7mm in height, 2334.2mm in length (DCT/ABS), and 929.6mm in width (DCT/ABS), with a wheelbase of 1574.8mm and seat height of 871.2mm to 850.9mm. It also has a ground clearance of 250mm, wet weight of 230kg (MT) or 240kg (DCT), and fuel capacity of 18.7 litres. The ABS system is 2-channel with rear ABS off switch (DCT/ABS model only, not on STD model).


Technical specifications:

Make Model: Honda CRF 1000L Africa Twin

Year: 2018
Engine: Four stroke, parallel Twin with 270 degrees crank, SOHC, 4 valves per cylinder
Capacity: 998 cc / 60.9 cu-in
Bore x Stroke: 92.0 x 75.1 mm
Cooling System: Liquid cooled
Starting: Electric
Max Power: 70 kW / 93.8 hp @ 7500 rpm
Max Torque: 98 Nm / 72.2 ft-lb @ 6000 rpm
Clutch: Wet, multi-plate with coil springs, aluminum cam
Transmission: Constant mesh 6-speed manual / 6-speed DCT with on- and off-road riding modes
Final Drive: O-ring sealed chain
Honda Selectable Torque Control System (HSTC): HSTC 3-levels + switch-off (DCT/ABS model only, not on STD model)
Frame: Steel semi-double cradle type with high-tensile strength steel rear sub-frame
Turning Radius: 2 5 m / 8.2 ft
Front Brakes: 2x 310 mm floating hydraulic discs with aluminum hub and radial fit 4-piston calipers and sintered metal pads
Rear Brakes: Single 256mm wave hydraulic disc with 2-piston caliper and sintered metal pads. Also Lever-Lock Type Parking Brake System on DCT/ABS model
ABS System: ABS 2-channel with rear ABS off switch (DCT/ABS model only, not on STD model)
Front Wheel: Wire spoke with aluminum rim.
Rear Wheel: Wire spoke with aluminum rim
Front Rim: 21M/C x MT2.15
Rear Rim: 18M/C x MT4.00
Front Tyre: 90/90-R21 tube type
Rear Tyre: 150/70-R18 tube type
Dimensions: Height 1475.7 mm / 58.1 in (STD) Length 2334.2 mm / 91.9 in (DCT/ABS) Width 929.6 mm / 36.6 in (DCT/ABS) Height 1475.7 mm / 58.1 in (DCT/ABS)
Wheelbase: 1574.8 mm / 62.0 in
Seat Height: 871.2 mm / 34.3 in – 850.9 mm / 33.5 in
Ground Clearance: 250 mm / 9.8 in
Wet Weight: 230 kg (MT), 240kg (DCT) / 507 lbs (MT), 52+ lbs (DCT)
Fuel Capacity: 18.7 Litres / 4.96 gal

The post Honda CRF 1000L Africa Twin (2018) appeared first on MotorcycleSpecifications.com.

]]>
Honda CRF 1000L Africa Twin (2016-17) https://motorcyclespecifications.com/honda-crf-1000l-africa-twin-2016-17-specs/ Thu, 30 Mar 2023 07:36:11 +0000 https://motorcyclespecifications.com/?p=37394 The Honda CRF 1000L Africa Twin is a motorcycle with a four-stroke, parallel twin engine and a capacity of 998cc. With a maximum power output of 70 kW at 7500

The post Honda CRF 1000L Africa Twin (2016-17) appeared first on MotorcycleSpecifications.com.

]]>
The Honda CRF 1000L Africa Twin is a motorcycle with a four-stroke, parallel twin engine and a capacity of 998cc. With a maximum power output of 70 kW at 7500 rpm and maximum torque of 98 Nm at 6000 rpm, this bike is outfitted with wet, multi-plate clutch with coil springs and an aluminum cam. For transmission, it features both a constant mesh six-speed manual and six-speed DCT with on- and off-road riding modes. The bike also includes O-ring sealed chains for its final drive. The CRF 1000L’s steel semi-double cradle type frame has a high-tensile strength steel rear sub-frame that allows for a turning radius of 2.5 meters. Its front brakes are 2x 310mm floating hydraulic discs with aluminum hub and radial fit, 4-piston calipers and sintered metal pads, while its rear brakes are a single 256mm wave hydraulic disc with 2-piston caliper and sintered metal pads. The ABS system is ABS 2-channel with rear ABS off switch, and the HSTC is 3-levels with a switch-off (DCT/ABS model only, not on STD model). Additionally, it has wire spoke wheels with aluminum rims and tube-type tires. The Africa Twin’s dimensions measure at 1475.7mm in height (STD), 2334.2mm in length (DCT/ABS), and 929.6mm in width (DCT/ABS). The wheelbase for this bike is 1574.8mm, and it has a seat height of 871.2 mm / 34.3 in – 850.9 mm / 33.5 in. Its ground clearance is 250mm, and its wet weight is 232kg (MT), 242kg (DCT) / 511.5 lbs (MT), 533.5 lbs (DCT). Finally, the fuel tank capacity for the Honda CRF 1000L Africa Twin is 18.7 liters / 4.96 gallons.


Technical specifications:

Make Model: Honda CRF 1000L Africa Twin

Year: 2016 – 17
Engine: Four stroke, parallel Twin with 270 degrees crank, SOHC, 4 valves per cylinder
Capacity: 998 cc / 60.9 cu-in
Bore x Stroke: 92.0 x 75.1 mm
Cooling System: Liquid cooled
Starting: Electric
Max Power: 70 kW / 93.8 hp @ 7500 rpm
Max Torque: 98 Nm / 72.2 ft-lb @ 6000 rpm
Clutch: Wet, multi-plate with coil springs, aluminum cam
Transmission: Constant mesh 6-speed manual / 6-speed DCT with on- and off-road riding modes
Final Drive: O-ring sealed chain
Honda Selectable Torque Control System (HSTC): HSTC 3-levels + switch-off (DCT/ABS model only, not on STD model)
Frame: Steel semi-double cradle type with high-tensile strength steel rear sub-frame
Turning Radius: 2 5 m / 8.2 ft
Front Brakes: 2x 310 mm floating hydraulic discs with aluminum hub and radial fit 4-piston calipers and sintered metal pads
Rear Brakes: Single 256mm wave hydraulic disc with 2-piston caliper and sintered metal pads. Also Lever-Lock Type Parking Brake System on DCT/ABS model
ABS System: ABS 2-channel with rear ABS off switch (DCT/ABS model only, not on STD model)
Front Wheel: Wire spoke with aluminum rim.
Rear Wheel: Wire spoke with aluminum rim
Front Rim: 21M/C x MT2.15
Rear Rim: 18M/C x MT4.00
Front Tyre: 90/90-R21 tube type
Rear Tyre: 150/70-R18 tube type
Dimensions: Height 1475.7 mm / 58.1 in (STD) Length 2334.2 mm / 91.9 in (DCT/ABS) Width 929.6 mm / 36.6 in (DCT/ABS) Height 1475.7 mm / 58.1 in (DCT/ABS)
Wheelbase: 1574.8 mm / 62.0 in
Seat Height: 871.2 mm / 34.3 in – 850.9 mm / 33.5 in
Ground Clearance: 250 mm / 9.8 in
Wet Weight: 232 kg (MT), 242kg (DCT) / 511.5 lbs (MT), 533.5 lbs (DCT)
Fuel Capacity: 18.7 Litres / 4.96 gal

The post Honda CRF 1000L Africa Twin (2016-17) appeared first on MotorcycleSpecifications.com.

]]>
Honda CRF 1000L Africa Twin Adventure Sports (2018) https://motorcyclespecifications.com/honda-crf-1000l-africa-twin-adventure-sports-2018-specs/ Mon, 27 Mar 2023 09:24:08 +0000 https://motorcyclespecifications.com/?p=33439 The Honda CRF 1000L2 Africa Twin Adventure Sports motorcycle for 2018 is a four-stroke, parallel twin engine with a capacity of 998 cc. It features a liquid cooling system, electric

The post Honda CRF 1000L Africa Twin Adventure Sports (2018) appeared first on MotorcycleSpecifications.com.

]]>
The Honda CRF 1000L2 Africa Twin Adventure Sports motorcycle for 2018 is a four-stroke, parallel twin engine with a capacity of 998 cc. It features a liquid cooling system, electric starting, and has a maximum power output of 70 kW at 7500 rpm. The motorcycle has two clutch options (wet, multiplate with coil springs, and 2 wet multiple clutches), a constant mesh 6-speed manual or 6-speed DCT transmission with on- and off-road riding modes, and an O-ring sealed chain final drive. The Honda Selectable Torque Control System (HSTC) is included in the DCT/ABS model only, not the STD model. The semi-double cradle frame has high-tensile strength steel rear sub-frame with a turning radius of 2.5 m (8.2 ft). The front suspension is a telescopic fork with hydraulic dial-style preload and damping (compression & rebound) adjuster, while the rear suspension is a monoblock cast aluminum swing arm with Pro-Link and a gas-charged damper. The front brakes have 310 mm floating hydraulic discs with aluminum hub and radial fit 4-piston calipers and sintered metal pads, while the rear brakes have a single 256mm wave hydraulic disc with 2-piston caliper and sintered metal pads. The ABS System is a 2-channel system with rear ABS off switch, included only in the DCT/ABS model. The wire spoke wheels come with an aluminum rim, while the front tire is a 90/90-21 tube type, and the rear tire a 150/70-R18 tube type. The motorcycle has a length of 2340 mm, a width of 929.6 mm, a height of 1570 mm, a wheelbase of 1580 mm, and a seat height ranging from 900 mm to 920 mm. The motorcycle has a ground clearance of 270 mm and has a wet weight of 243 kg to 253 kg depending on the clutch option. The fuel capacity is 24.2 Liters.


Technical specifications:

Make Model: Honda CRF 1000L2 Africa Twin Adventure Sports

Year: 2018
Engine: Four stroke, parallel Twin with 270 degrees crank, SOHC, 4 valves per cylinder
Capacity: 998 cc / 60.9 cu-in
Bore x Stroke: 92.0 x 75.1 mm
Cooling System: Liquid cooled
Starting: Electric
Max Power: 70 kW / 93.8 hp @ 7500 rpm
Max Torque: 98 Nm / 72.2 ft-lb @ 6000 rpm
Clutch: MT: Wet, multiplate with coil springs, Aluminium Cam Assist and Slipper clutchDCT: 2 Wet multiple clutches
Transmission: Constant mesh 6-speed manual / 6-speed DCT with on- and off-road riding modes
Final Drive: O-ring sealed chain
Honda Selectable Torque Control System (HSTC): HSTC 3-levels + switch-off (DCT/ABS model only, not on STD model)
Frame: Steel semi-double cradle type with high-tensile strength steel rear sub-frame
Turning Radius: 2 5 m / 8.2 ft
Front Suspension: Telescopic fork with hydraulic dial-style preload and damping (compression & rebound) adjuster, 252mm stroke, 224mm axle travel
Rear Suspension: Monoblock cast aluminium swing arm with Pro-Link with gas-charged damper, hydraulic dial-style preload adjuster and rebound damping adjustment, 240 mm rear wheel travel, 101 mm stroke
Front Brakes: 2x 310 mm floating hydraulic discs with aluminum hub and radial fit 4-piston calipers and sintered metal pads
Rear Brakes: Single 256mm wave hydraulic disc with 2-piston caliper and sintered metal pads. Also Lever-Lock Type Parking Brake System on DCT/ABS model
ABS System: ABS 2-channel with rear ABS off switch (DCT/ABS model only, not on STD model)
Wheels: Wire spoke with aluminium rim
Front Rim: 21M/C x MT2.15
Rear Rim: 18M/C x MT4.00
Front Tyre: 90/90-21 tube type
Rear Tyre: 150/70-R18 tube type
Dimensions: Length 2340 mm / 92.1 in Width 929.6 mm / 36.6 in Height 1570 mm / 61.8 in
Wheelbase: 1580 mm / 62.2 in
Seat Height: 900 mm / 35.4 in – 920 mm 36.2 in
Ground Clearance: 270 mm / 10.6 in
Wet Weight: 243 kg / 535.7 lbs – 253 kg / 557.7 lbs DCT
Fuel Capacity: 24.2 Litres / 3.3 US gal

The post Honda CRF 1000L Africa Twin Adventure Sports (2018) appeared first on MotorcycleSpecifications.com.

]]>