Honda CM 450 (1982)

admin — Wed, 29 Mar 2023 14:46:54 +0000

The Honda CM 450 is a motorcycle manufactured in 1982 with a four-stroke parallel twin engine, producing 37 horsepower at 9000 RPM and a 6-speed transmission. The engine has a capacity of 447cc and a compression ratio of 9.3:1. The bike is air-cooled and powered by an Electric ignition with a CDI system. The front suspension features Telehydraulic forks and the rear suspension is a swingarm fork with adjustable telehydraulic shocks. Front brakes consist of a single disc, while the rear brake is a drum. The bike has a dry weight of 181 kg / 399 lbs and a fuel capacity of 13 Litres / 3.4 US gal. On average, it can consume 64 miles per US Gallon and travel a standing 1/4 mile in 13.7 seconds.

Technical specifications:

Make Model: Honda CM 450

Year: 1982
Engine: Four stroke, parallel twin, OHC,3 valve per cylinder
Capacity: 447 cc / 27.2 cu-in
Bore x Stroke: 75 x 50.6 mm
Cooling System: Air cooled
Compression Ratio: 9.3:1
Induction: 2x 30mm Keihin CV
Ignition: CDI
Starting: Electric
Max Power: 37 hp / 27.5 kW @ 9000 rpm
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telehydraulic forks
Rear Suspension: Swingarm fork with adjustable telehydraulic shocks.
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 3.50-18
Rear Tyre: 4.00-16
Dry Weight: 181 kg / 399 lbs
Fuel Capacity: 13 Litres / 3.4 US gal
Consumption Average: 64 mp/g
Standing 1/4 Mile: 13.7 sec

The post Honda CM 450 (1982) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF-SE2 Dyna Fat Bob CVO (2010)

admin — Sat, 25 Mar 2023 16:52:11 +0000

The Harley Davidson FXDF-SE2 Dyna Fat Bob CVO (2010) motorcycle has a four-stroke, Twin Cam 110 c engine with a capacity of 1804 cc / 110.1 cub in. It has pushrod-operated, overhead valves with hydraulic, self-adjusting lifters and two valves per cylinder. The bike features Electronic Sequential Port Fuel Injection (ESPFI) for efficient fuel consumption and a single-fire, non-wasted, map-controlled spark ignition. It has a six-speed transmission with a final drive belt and a frame made of mild steel with a tubular design. The front suspension has a polished aluminum fork triple clamp and dual-rate springs, while the rear suspension is a coil over shock. The brakes consist of 2x 299.7mm discs with four-piston calipers in the front and a single 292mm disc with a four-piston caliper in the back. The bike has a seat height of 665 mm / 26.2 in and weighs 313 kg / 692 lbs, with a fuel capacity of 18.9 litres / 5.0 US gal.

Technical specifications:

Make Model: Harley Davidson FXDF-SE Dyna Fat Bob CVO

Year: 2010
Engine: Four stroke, Twin Cam 110 c Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity: 1804 cc / 110.1 cub in.
Bore x Stroke: 101.6 x 111.3 mm
Cooling System: Air cooled
Compression Ratio: 9.15:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 155.5 Nm / 114.0 ft lbs @ 3500 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Rear Suspension: Coil over shock
Front Brakes: 2x 299.7mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: 130/90B -16
Rear Tyre: 180/70B -16
Seat Height: 665 mm / 26.2 in
Dry Weight: 313 kg / 692 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal

The post Harley Davidson FXDF-SE2 Dyna Fat Bob CVO (2010) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF-SE2 Dyna Fat Bob CVO Archives - MotorcycleSpecifications.com

Honda CM 450 (1982)

Technical specifications:

Harley Davidson FXDF-SE2 Dyna Fat Bob CVO (2010)

Technical specifications: