Harley Davidson FXDF Dyna Fat Bob Archives - MotorcycleSpecifications.com

Harley Davidson FXDF Dyna Fat Bob (2010)

admin — Fri, 07 Apr 2023 09:09:07 +0000

The Harley Davidson FXDF Dyna Fat Bob is a motorcycle model from the year 2010. It has a four-stroke, 45 degrees V-twin, Twin Cam 96 engine with a capacity of 1584 cc. The engine has pushrod-operated overhead valves, with hydraulic self-adjusting lifters and two valves per cylinder. It has an electronic sequential port fuel injection (ESPFI) system and a single-fire, non-wasted, map-controlled spark ignition. The motorcycle has a six-speed transmission and a belt final drive. The frame is made of mild steel, with a tubular frame, rectangular section backbone, stamped, cast, and forged junctions, forged fender supports, and MIG welded. The front suspension has a 49 mm polished aluminum fork triple clamp and dual-rate springs, and the rear suspension is a coil-over shock. The front brakes have 2x 299mm discs with 4-piston calipers, and the rear brake has a single 292mm disc with a 2-piston caliper. The front tire is a D427F 130/90B16 67H, and the rear tire is a D427 180/70B16 77H. The motorcycle has a rake of 29 degrees, a fork angle of 28 degrees, and a trail of 125 mm / 4.9 in. Its length is 2329.9 mm / 91.7 in, width 889.76 mm / 35.0 in, and height 1131.82 mm / 44.5 in. The wheelbase is 1619.7 mm / 63.7 in, and the seat height is laden2 663 mm / 26.1 in or unladen 686 mm / 27.0 in. The dry weight is 303.7 kg / 7 lbs, and the wet weight is 320.0 kg / 706 lbs. The gross vehicle weight rating is 392.2 kg / 1085 lbs, and the fuel capacity is 18.9 Litres / 5.0 US gal.

Technical specifications:

Make Model: Harley Davidson FXDF Dyna Fat Bob

Year: 2010
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: 2x 299mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: D427F 130/90B16 67H
Rear Tyre: D427 180/70B16 77H
Rake: 29 degrees
Fork Angle: 28 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2329.9 mm / 91.7 in width 889.76 mm / 35.0 in Height 1131.82 mm / 44.5 in
Wheelbase: 1619.7 mm / 63.7 in
Seat Height: Laden2 663 mm / 26.1 in Unladen 686 mm / 27.0 in
Dry Weight: 303.7 kg / 7 lbs
Wet Weight: 320.0 kg / 706 lbs
Gross Vehicle Weight Rating: 392.2 kg / 1085 lbs
Fuel Capacity: 18 9 Litres / 5.0 US gal

The post Harley Davidson FXDF Dyna Fat Bob (2010) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2011)

admin — Thu, 06 Apr 2023 20:17:01 +0000

The Harley Davidson FXDF Dyna Fat Bob motorcycle was released in 2011 with a 1584cc V-Twin engine that delivers 96 cu-in of power. The engine is air-cooled, has pushrod-operated overhead valves, hydraulic self-adjusting lifters, and a compression ratio of 9.2:1. It uses Electronic Sequential Port Fuel Injection (ESPFI) and single-fire, non-wasted, map-controlled spark ignition for efficient and reliable performance. The bike is equipped with a multi-plate, wet clutch and a 6-speed transmission with belt final drive.

The frame is made of mild steel with a tubular frame, rectangular section backbone, stamped, cast and forged junctions, forged fender supports, and is MIG welded. The suspension system consists of a 49mm polished aluminum fork triple clamp and dual-rate springs in the front and a coil-over shock in the rear. The front and rear brakes are equipped with 299mm disc 4-piston calipers and 292mm disc 2-piston calipers, respectively.

The Harley Davidson FXDF Dyna Fat Bob motorcycle dimensions include a wheelbase of 1619.7 mm, a seat height of 686 mm, and a dry weight of 303.7 kg. The bike has a fuel capacity of 18.9 liters and can handle a gross vehicle weight rating of up to 392.2 kg. Overall, the Harley Davidson FXDF Dyna Fat Bob of 2011 remains a popular choice among motorcycle enthusiasts who appreciate its classic style and impressive performance.

Technical specifications:

Make Model: Harley Davidson FXDF Dyna Fat Bob

Year: 2011
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: 2x 299mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: D427F 130/90B16 67H
Rear Tyre: D427 180/70B16 77H
Rake: 29 degrees
Fork Angle: 28 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2329.9 mm / 91.7 in width 889.76 mm / 35.0 in Height 1131.82 mm / 44.5 in
Wheelbase: 1619.7 mm / 63.7 in
Seat Height: Laden2 663 mm / 26.1 in Unladen 686 mm / 27.0 in
Dry Weight: 303.7 kg / 7 lbs
Wet Weight: 320.0 kg / 706 lbs
Gross Vehicle Weight Rating: 392.2 kg / 1085 lbs
Fuel Capacity: 18 9 Litres / 5.0 US gal

The post Harley Davidson FXDF Dyna Fat Bob (2011) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2009)

admin — Wed, 05 Apr 2023 18:47:04 +0000

The Harley Davidson FXDF Dyna Fat Bob is a 2009 motorcycle which features a 1584cc four-stroke V-twin engine with 96 cubic inches capacity. It has pushrod-operated overhead valves with hydraulic self-adjusting lifters and a compression ratio of 9.2:1. The bike has electronic sequential port fuel injection (ESPFI) and a single-fire, non-wasted, map-controlled spark ignition. The clutch is multi-plate and wet, and it has a 6-speed transmission with a belt final drive. The mild steel, tubular frame is MIG welded and has stamped, cast, and forged junctions, forged fender supports. The front suspension includes 49mm with polished aluminum fork triple clamp and dual-rate springs, while the rear suspension has a coil-over shock. The bike has dual front brakes with 299mm disc 4 piston caliper and a single rear brake with 292mm disc 2 piston caliper. It runs on D427F 130/90B16 67H front tires and D427 180/70B16 77H rear tires. The rake is 29 degrees and the fork angle is 28 degrees, with a trail of 125mm/4.9in. It has a length of 2329.9mm/91.7in, width of 889.76mm/35.0in, and a height of 1131.82mm/44.5in. The wheelbase is 1619.7mm/63.7in, and the seat height when laden is 663mm/26.1in and when unladen is 686mm/27.0in. The dry weight is 303.7kg/7lbs, and the wet weight is 320.0kg/706lbs. The gross vehicle weight rating is 392.2kg/1085lbs, and it has a fuel capacity of 18.9 litres/5.0 US gal.

Technical specifications:

Make Model: Harley Davidson FXDF Dyna Fat Bob

Year: 2009
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: 2x 299mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: D427F 130/90B16 67H
Rear Tyre: D427 180/70B16 77H
Rake: 29 degrees
Fork Angle: 28 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2329.9 mm / 91.7 in width 889.76 mm / 35.0 in Height 1131.82 mm / 44.5 in
Wheelbase: 1619.7 mm / 63.7 in
Seat Height: Laden2 663 mm / 26.1 in Unladen 686 mm / 27.0 in
Dry Weight: 303.7 kg / 7 lbs
Wet Weight: 320.0 kg / 706 lbs
Gross Vehicle Weight Rating: 392.2 kg / 1085 lbs
Fuel Capacity: 18 9 Litres / 5.0 US gal

The post Harley Davidson FXDF Dyna Fat Bob (2009) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2012)

admin — Tue, 04 Apr 2023 00:39:16 +0000

The Harley Davidson FXDF Dyna Fat Bob is a 2012 motorcycle with a four stroke, V-Twin, Twin Cam 103 c engine that has an integrated oil cooler. It has a capacity of 1690 cc / 103 cu. in and a bore x stroke of 98.4 x 111.3 mm. The motorcycle is air cooled and has a compression ratio of 9.6:1. The FXDF Dyna Fat Bob has electronic sequential port fuel injection (ESPFI) for its induction and a single-fire, non-wasted, map-controlled spark ignition for its ignition. It has a 6-speed transmission with a final drive that uses a belt. The motorcycle has a mild steel, tubular frame with a rectangular section backbone, stamped, cast, and forged junctions, and forged fender supports that are MIG welded. Its front suspension has 49 mm with polished aluminum fork triple clamp and dual-rate springs, while its back suspension is a coil over shock. The front and rear brakes have a single 300 mm disc and 292 mm disc with 4 piston caliper and 2 piston caliper, respectively. The motorcycle has front and rear tyres that are 130/90B16 67 and 180/70B16 77H. Its rake is 29 degrees, and its trail measures 125mm. The dimensions of the FXDF Dyna Fat Bob are length 2329 mm / 91.7 in, width 889 mm / 35.0 in, height 1130 mm / 44.5 in, and wheelbase 1618 mm / 63.7 in. Its seat has a height of 663 mm / 26.1 in laden and 686 mm / 27.0 in unladen. The motorcycle has a gross vehicle weight rating of 492 kg / 1085 lbs with a wet weight of 320 kg / 706 lbs. Its oil capacity is 2.8 litres / 3.0 qts and has a fuel capacity of 18.9 litres / 5.0 US gal.

Technical specifications:

Make Model: Harley Davidson FXDF Dyna Fat Bob

Year: 2012
Engine: Four stroke, V-Twin, Twin Cam 103 c with integrated oil cooler
Capacity: 1690 cc / 103 cu. in
Bore x Stroke: 98.4 x 111.3 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 134 Nm / 98.8 ft/ lbs @ 3500 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.311 2nd 6.454 3rd 4.793 4th 3.882 5th 3.307 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Front Wheel Travel: 127 mm / 4.9 in
Rear Suspension: Coil over shock
Rear Wheel Travel: 54 mm / 2.1 in
Front Brakes: Single 300mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: 130/90B16 67
Rear Tyre: 180/70B16 77H
Rake: 29 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2329 mm / 91.7 in Width 889 mm / 35.0 in Height 1130 mm / 44.5 in.
Wheelbase: 1618 mm / 63.7 in.
Seat Height: Laden 663 mm / 26.1 in Unladen 686 mm / 27.0 in
Gross Vehicle Weight Rating: 492 kg / 1085 lbs
Wet Weight: 320 kg / 706 lbs
Oil Capacity: 2.8 Litres / 3.0 qts
Fuel Capacity: 18.9 Litres / 5.0 US gal

The post Harley Davidson FXDF Dyna Fat Bob (2012) appeared first on MotorcycleSpecifications.com.

Honda CM250T (1981-84)

admin — Sat, 01 Apr 2023 10:51:01 +0000

The Honda CM 250 Custom is a motorcycle produced by Honda from 1981 to 1984. It is equipped with a four-stroke, parallel-twin, OHC engine with a capacity of 234cc. The bore and stroke are 53 x 53mm, and the compression ratio is 9.4:1. The motorcycle is air-cooled and has three valves per cylinder. The ignition system is of the electronic type, and the maximum output power is 17hp at 7,500rpm. The maximum torque output is not specified. The transmission is a six-speed manual gearbox, and the final drive is via a chain. The front suspension is a conventional 31mm fork with a center axle, and the rear suspension comprises dual shocks with adjustable spring preload. Both front and rear brakes are of the drum type, and the front tire measures 3.25-18, while the rear tire is 110/90-16. The wet weight is 140kg, and the fuel capacity is 12.5 liters. Overall, the Honda CM 250 Custom is a reliable and affordable motorcycle suitable for entry-level riders or anyone looking for an easy-to-ride two-wheeler for everyday commuting.

Technical specifications:

Make Model: Honda CM 250 Custom

Year: 1981-84
Engine: Four stroke, parallel twin, OHC, 3 valve per cylinder
Capacity: 234
Bore x Stroke: 53 x 53 mm
Cooling System: Air cooled
Compression Ratio: 9.4:1
Induction:
Ignition:
Max Power: 17 hp @ 7500 rpm
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 31mm Forks, centre axle fork
Rear Suspension: Dual shocks adjustable spring preload
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.25-18
Rear Tyre: 110/90-16
Wet-Weight: 140 kg
Fuel Capacity: 12.5 Litres

The post Honda CM250T (1981-84) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2008)

admin — Thu, 30 Mar 2023 17:33:04 +0000

The Harley Davidson FXDF Dyna Fat Bob motorcycle was manufactured in 2008. It has a four-stroke, 45-degree V-twin engine, with a capacity of 1584cc and a compression ratio of 9.2:1. The engine is air-cooled and uses electronic sequential port fuel injection (ESPFI) for induction. The bike has a multi-plate, wet clutch and a six-speed transmission with a final drive of a belt. The frame is made of mild steel, with a rectangular section backbone, and stamped, cast, and forged junctions that are MIG welded. The front suspension consists of 49mm dual-rate springs, while the rear uses coil-over shock. The bike has dual front brakes with 4-piston calipers and a single rear brake with a 2-piston caliper. The front tire is D427F 130/90B16 67H, while the rear is D427 180/70B16 77H. The rake is 29 degrees, while the fork angle is 28 degrees, and the trail is 125mm or 4.9 inches. The bike has a length of 2329.9mm or 91.7 inches, a width of 889.76mm or 35.0 inches, and a height of 1131.82mm or 44.5 inches. The bike’s wheelbase is 1619.7mm or 63.7 inches, and it has a seat height of 686mm or 27 inches when unladen. The motorcycle weighs 303.7kg or 7lbs when dry and 320.0kg or 706lbs when wet. Its gross vehicle weight rating is 392.2kg or 1085lbs, and it has a fuel capacity of 18.9 litres or 5.0 US gallons.

Technical specifications:

Make Model: Harley Davidson FXDF Dyna Fat Bob

Year: 2008
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: 2x 299mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: D427F 130/90B16 67H
Rear Tyre: D427 180/70B16 77H
Rake: 29 degrees
Fork Angle: 28 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2329.9 mm / 91.7 in width 889.76 mm / 35.0 in Height 1131.82 mm / 44.5 in
Wheelbase: 1619.7 mm / 63.7 in
Seat Height: Laden2 663 mm / 26.1 in Unladen 686 mm / 27.0 in
Dry Weight: 303.7 kg / 7 lbs
Wet Weight: 320.0 kg / 706 lbs
Gross Vehicle Weight Rating: 392.2 kg / 1085 lbs
Fuel Capacity: 18 9 Litres / 5.0 US gal

The post Harley Davidson FXDF Dyna Fat Bob (2008) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2009)

admin — Thu, 30 Mar 2023 15:22:57 +0000

The Harley Davidson FXDF-SE Dyna Fat Bob CVO is a 2009 model motorcycle featuring a four-stroke, twin cam engine with a capacity of 1804 cc and a maximum torque of 155.5 Nm at 3500 rpm. It has electronic sequential port fuel injection (ESPFI), an air-cooled cooling system, and a multi-plate, wet clutch. Its transmission is six-speed, and it has a belt final drive. The frame is made of mild steel, and the front suspension has a 49 mm polished aluminum fork triple clamp with dual-rate springs. The rear suspension is a coil-over shock, and the front brakes are two 299.7mm discs with four-piston calipers, while the rear brake is a single 292mm disc with a four-piston caliper. The tires are 130/90B -16 at the front and 180/70B -16 at the rear. The seat height is 665 mm, and the dry weight is 313 kg. It has a fuel capacity of 18.9 liters.

Technical specifications:

Make Model: Harley Davidson FXDF-SE Dyna Fat Bob CVO

Year: 2009
Engine: Four stroke, Twin Cam 110 c Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity: 1804 cc / 110.1 cub in.
Bore x Stroke: 101.6 x 111.3 mm
Cooling System: Air cooled
Compression Ratio: 9.15:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 155.5 Nm / 114.0 ft lbs @ 3500 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Rear Suspension: Coil over shock
Front Brakes: 2x 299.7mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: 130/90B -16
Rear Tyre: 180/70B -16
Seat Height: 665 mm / 26.2 in
Dry Weight: 313 kg / 692 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal

The post Harley Davidson FXDF Dyna Fat Bob (2009) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2014-15)

admin — Tue, 28 Mar 2023 12:46:12 +0000

The Harley Davidson Dyna Fat Bob motorcycle was produced in 2014 and 2015. It has a four-stroke, V-twin, Twin Cam 103 c engine with an integrated oil cooler and a capacity of 1690cc/103 cu. in. The bike is air-cooled and has a compression ratio of 9.6:1. The Dyna Fat Bob uses electronic sequential port fuel injection (ESPFI) for induction and has a single-fire, non-wasted, map-controlled spark ignition. The bike can start using an electric ignition. The maximum torque of the Dyna Fat Bob is 134 Nm/98.8 ft/lbs at 3500 rpm. It has a multi-plate, wet clutch and a six-speed transmission. The final drive of the Dyna Fat Bob is a belt, and it has a frame made of mild steel, tubular frame with a rectangular section backbone, stamped, cast, and forged junctions, forged fender supports, and MIG welded. The front suspension of the motorcycle is 49 mm, with a polished aluminum fork triple clamp and dual-rate springs. The rear suspension uses a coil-over shock. The bike has a single 300mm disc with a four-piston caliper for the front brake and a single 292mm disc with a two-piston caliper for the rear brake. The front tire is 130/90B16 67, and the rear tire is 180/70B16 77H. The rake of the bike is 29 degrees, and its trail is 125 mm/4.9 in. The dimensions of the Dyna Fat Bob are a length of 2329mm/91.7 in, a width of 889mm/35.0 in, and a height of 1130mm/44.5 in, with a wheelbase of 1618mm/63.7 in. The motorcycle’s seat height is 663mm/26.1 in laden and 686mm/27.0 in unladen. The gross vehicle weight rating is 492kg/1085 lbs, and the wet weight is 320kg/706 lbs. The bike has an oil capacity of 2.8 liters/3.0 qts and a fuel capacity of 18.9 liters/5.0 US gal.

Technical specifications:

Make Model: Harley Davidson Dyna Fat Bob

Year: 2014 – 15
Engine: Four stroke, V-Twin, Twin Cam 103 c with integrated oil cooler
Capacity: 1690 cc / 103 cu. in
Bore x Stroke: 98.4 x 111.3 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 134 Nm / 98.8 ft/ lbs @ 3500 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.311 2nd 6.454 3rd 4.793 4th 3.882 5th 3.307 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Front Wheel Travel: 127 mm / 4.9 in
Rear Suspension: Coil over shock
Rear Wheel Travel: 54 mm / 2.1 in
Front Brakes: Single 300mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: 130/90B16 67
Rear Tyre: 180/70B16 77H
Rake: 29 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2329 mm / 91.7 in Width 889 mm / 35.0 in Height 1130 mm / 44.5 in.
Wheelbase: 1618 mm / 63.7 in.
Seat Height: Laden 663 mm / 26.1 in Unladen 686 mm / 27.0 in
Gross Vehicle Weight Rating: 492 kg / 1085 lbs
Wet Weight: 320 kg / 706 lbs
Oil Capacity: 2.8 Litres / 3.0 qts
Fuel Capacity: 18.9 Litres / 5.0 US gal

The post Harley Davidson FXDF Dyna Fat Bob (2014-15) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2013)

admin — Mon, 27 Mar 2023 08:13:04 +0000

The 2013 Harley Davidson FXDF Dyna Fat Bob motorcycle has a four stroke, V-Twin engine with a capacity of 1690 cc/103 cu. in. It features electronic sequential port fuel injection, a single-fire, non-wasted, map-controlled spark ignition, and an electric starter. The motorcycle has a maximum torque of 134 Nm/98.8 ft/lbs at 3500 rpm, and a six-speed transmission with a final drive belt. It has a mild steel, tubular frame with a rectangular section backbone, and a front suspension featuring a 49 mm polished aluminum fork triple clamp and dual-rate springs. The front brakes are a single 300mm disc 4 piston caliper, while the rear brakes are a single 292mm disc 2 piston caliper. The motorcycle has a length of 2329 mm/91.7 in, a width of 889 mm/35.0 in, and a height of 1130 mm/44.5 in, with a wheelbase of 1618 mm/63.7 in. The seat height is laden 663 mm/26.1 in and unladen 686 mm/27.0 in, with a gross vehicle weight rating of 492 kg/1085 lbs and a wet weight of 320 kg/706 lbs. The fuel capacity is 18.9 L/5.0 gal, and it has an oil capacity of 2.8 liters. The motorcycle has a rake of 29 degrees and a trail of 125 mm/4.9 in.

Technical specifications:

Make Model: Harley Davidson FXDF Dyna Fat Bob

Year: 2013
Engine: Four stroke, V-Twin, ‘Twin Cam 103 c
Capacity: 1690 cc / 103 cu. in
Bore x Stroke: 98.4 x 111.3 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 134 Nm / 98.8 ft/ lbs @ 3500 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.311 2nd 6.454 3rd 4.793 4th 3.882 5th 3.307 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Front Wheel Travel: 127 mm / 4.9 in
Rear Suspension: Coil over shock
Rear Wheel Travel: 54 mm / 2.1 in
Front Brakes: Single 300mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: 130/90B16 67
Rear Tyre: 180/70B16 77H
Rake: 29 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2329 mm / 91.7 in Width 889 mm / 35.0 in Height 1130 mm / 44.5 in.
Wheelbase: 1618 mm / 63.7 in.
Seat Height: Laden 663 mm / 26.1 in. Unladen 686 mm / 27.0 in
Gross Vehicle Weight Rating: 492 kg / 1085 lbs
Wet Weight: 320 kg / 706 lbs
Oil Capacity: 2.8 Litres
Fuel Capacity: 18.9 Litres / 5.0 gal

The post Harley Davidson FXDF Dyna Fat Bob (2013) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDF Dyna Fat Bob (2016-17)

admin — Sun, 26 Mar 2023 01:42:19 +0000

The Harley Davidson Dyna Fat Bob motorcycle year models 2016-2017 has a V-twin, twin cam 103 c engine with an integrated oil cooler and a capacity of 1690 cc/103 cu. in. It is air cooled with a compression ratio of 9.6:1 and electronic sequential port fuel injection. The ignition is single-fire, non-wasted, and map-controlled spark ignition that starts electrically. The motorcycle has a maximum torque of 132 Nm/13.5 kgf-m/98.0 ft/lbs at 3250 rpm with a multi-plate, wet clutch and 6-speed transmission. The primary drive is a chain with a 34/46 final drive belt and a gear ratio of 1s 9.311/2nd 6.454/3rd 4.793/4th 3.882/5th 3.307/6th 2.790:1. The frame is a mild steel, tubular frame with a rectangular section backbone, stamped, cast and forged junctions, forged fender supports, and MIG welded. The motorcycle has a lean angle of 31 degrees to the left and 30 degrees to the right. The front suspension is 49mm with polished aluminum fork triple clamp and dual-rate springs with a front wheel travel of 127 mm/4.9 in. The rear suspension is coil over shock with a rear wheel travel of 54 mm/2.1 in. The front brake is a single 300mm disc with a 4 piston fixed caliper, and the rear brake is a single 292mm disc with a 2 piston torque-free floating caliper. The wheels are front and rear, glossy black cast aluminum with laser-etched graphics, and the front tire is 130/90B16 67, while the rear tire is 180/70B16 77H. The rake is 29 degrees with a trail of 125 mm/4.9 in. The dimensions are length 2400 mm/94.5 in, with a wheelbase of 1620 mm/63.8 in. The seat height is unladen at 690 mm/27.2 in, with a ground clearance of 125 mm/4.9 in. The gross vehicle weight rating is 492 kg/1085 lbs, and the dry weight is 306 kg/675 lbs, with a wet weight of 321 kg/708 lbs. The oil capacity is 2.8 liters/3.0 US qt, and the fuel capacity is 18.9 liters/5.0 US gal with an average consumption of 5.6 L/100 km/17.9 km/l/42 US mpg.

Technical specifications:

Make Model: Harley Davidson Dyna Fat Bob

Year: 2016 – 17
Engine: Four stroke, V-Twin, Twin Cam 103 c with integrated oil cooler
Capacity: 1690 cc / 103 cu. in
Bore x Stroke: 98.4 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Exhaust: Chrome, Tommy Gun 2-1-2 collector exhaust with dual mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 132 Nm / 13.5 kgf-m / 98.0 ft/ lbs @ 3250 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Primary Drive: Chain, 34/46
Final Drive: Belt
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790:1
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Lean Angle, Left: 31o
Lean Angle, Right: 30o
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Front Wheel Travel: 127 mm / 4.9 in
Rear Suspension: Coil over shock
Rear Wheel Travel: 54 mm / 2.1 in
Front Brakes: Single 300mm disc, 4 piston fixed caliper
Rear Brakes: Single 292mm disc, 2 piston torque-free floating caliper
Wheels, Front and Rear: Gloss black cast aluminum wheel with laser etched graphics
Front Tyre: 130/90B16 67
Rear Tyre: 180/70B16 77H
Rake: 29 degrees
Trail: 125 mm / 4.9 in
Dimensions: Length 2400 mm / 94.5 in
Wheelbase: 1620 mm / 63.8 in.
Seat Height: Unladen 690 mm / 27.2 in
Ground Clearance: 125 mm / 4.9 in
Gross Vehicle Weight Rating: 492 kg / 1085 lbs
Dry Weight: 306 kg / 675 lbs
Wet Weight: 321 kg / 708 lbs
Oil Capacity: 2.8 Litres / 3.0 US qt
Fuel Capacity: 18 9 Litres / 5.0 US gal
Average Consumption: 5.6 L/100 km / 17.9 km/l / 42 US mpg

The post Harley Davidson FXDF Dyna Fat Bob (2016-17) appeared first on MotorcycleSpecifications.com.