Harley Davidson FLHRS/I Road King Custom Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 22:55:42 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Honda CB125 (1976-77) https://motorcyclespecifications.com/honda-cb125-1976-77-specs-2/ Wed, 29 Mar 2023 05:51:58 +0000 https://motorcyclespecifications.com/?p=35947 The Honda CB 125 is a four-stroke motorcycle with a twin-cylinder, overhead camshaft and two valves per cylinder, developed by Honda in 1976-77. It has a 124cc capacity and a

The post Honda CB125 (1976-77) appeared first on MotorcycleSpecifications.com.

]]> The Honda CB 125 is a four-stroke motorcycle with a twin-cylinder, overhead camshaft and two valves per cylinder, developed by Honda in 1976-77. It has a 124cc capacity and a bore and stroke of 44mm x 41mm. The bike is air-cooled and has a compression ratio of 7.4:1. It has two Keihin 22mm slide type carburetors that use manual choke. The ignition system is battery and coil, and the bike can be started with a kick. The Honda CB 125 can reach a maximum power of 17 hp at 11500 rpm, but the maximum torque is not specified. The clutch is multi-disc, wet, and the bike has a five-speed transmission, with a chain for final drive. It has a telescopic fork front suspension and swing arm rear suspension, with 4.5 inches and 2.6 inches of wheel travel, respectively. The front and rear brakes are drum-type, and the bike has a front tire size of 2.50 -18 and rear tire size of 2.75 -18. The dry weight is 133 kg or 295.4 lbs, and the fuel capacity is 10 liters or 10.6 US gallons.

Technical specifications:

Make Model: Honda CB 125

Year: 1976 – 77
Engine: Four stroke, twin cylinder, OHC, 2 valve per cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 44 x 41 mm
Cooling System: Air cooled
Compression Ratio: 7.4:1
Induction: 2x Keihin 22mm slide type manual choke
Ignition: Battery & coil
Starting: Kick
Max Power: 17 hp / 12.4 kW @ 11500 rpm
Max Torque: NA
Clutch: Multi-disc, wet
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 5th 9.46 / 4th 11.10 / 3rd 13.72 / 2nd 17.81 / 1st 26.20
Front Suspension: Telescopic fork, 4.5 in wheel travel.
Rear Suspension: Swing arm, 2.6 in wheel travel.
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 2.50 -18
Rear Tyre: 2.75 -18
Dry-Weight: 133 kg / 295.4 lbs
Fuel Capacity: 10 Litres / 10.6 US gal

The post Honda CB125 (1976-77) appeared first on MotorcycleSpecifications.com.

]]> Harley Davidson FLHRS/I Road King Custom (2004-05) https://motorcyclespecifications.com/harley-davidson-flhrs-i-road-king-custom-2004-05-specs/ Mon, 27 Mar 2023 01:37:05 +0000 https://motorcyclespecifications.com/?p=32999 The Harley Davidson FLHRS/I Road King Custom was first manufactured in the years 2004-2005. Its engine is a four-stroke, 45-degree V-twin Twin Cam 88 with vibration isolation mounting. The bike’s

The post Harley Davidson FLHRS/I Road King Custom (2004-05) appeared first on MotorcycleSpecifications.com.

]]> The Harley Davidson FLHRS/I Road King Custom was first manufactured in the years 2004-2005. Its engine is a four-stroke, 45-degree V-twin Twin Cam 88 with vibration isolation mounting. The bike’s valve is operated by pushrods with hydraulic self-adjusting lifters and has two valves per cylinder. The bike has a capacity of 1449cc with a Bore x Stroke of 95.3 x 101.6mm. It has a compression ratio of 8.9:1 and is air-cooled. The bike also has carburetion 40mm constant velocity with enrichener and accelerator pump ESPFI 38mm throttle bore electronic sequential port fuel injection. The ignition of the bike is single-fire, non-wasted and map-controlled spark ignition with an electric start. The bike produces a maximum power of 67 hp/48.8 kW @ 5200 rpm and has a max torque of 116.6 Nm/86 lb-ft @ 3500rpm. The bike’s transmission is a 5-speed with a final drive of a belt gear ratio. The bike’s frame is mild steel, with square section backbone, and twin downtubes, while its swing arm is of mild steel, rectangular tube sections, stamped junctions and MIG-welded. The front suspension comprises of 41.3 mm telescopic while the rear has short, air-adjustable. The front brakes are 2x 292mm discs with 4 piston calipers while the rear has a single 292mm disc 4 piston caliper. The bike weighs 327 kg/721 lbs dry and 344 kg/757 lbs wet and has a fuel capacity of 19 litres/5.0 US gallons.

Technical specifications:

Make Model: Harley Davidson FLHRS/I Road King Custom

Year: 2004 – 05
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 88 (R) vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1449 cc / 88.4 cu-in
Bore x Stroke: 95.3 x 101.6 mm
Cooling System: Air cooled
Compression Ratio: 8.9:1
Lubrication: Dry sump, internally mounted, crank driven gerotor pressure and dual scavenge pump with spin on 10~Anot pressurized oil filter
Induction: Carburetion 40 mm constant velocity with enrichener and accelerator pump ESPFI 38 mm throttle bore electronic sequential port fuel injection
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Power: 67 hp / 48.8 kW @ 5200 rpm
Max Torque: 116.6 Nm / 86 lb-ft @ 3500rpm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.110 2nd 6.958 3rd 4.953 4th 3.862 5th 3.150
Frame: Mild steel, square section backbone w/ twin downtubes Swing Arm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 41.3 mm, telescopic
Rear Suspension: Short, air-adjustable
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D402F MT90B16 72H
Rear Tyre: D402 MU85B16 77H
Rake: 26 degrees
Trail: 157.5 mm / 6.2 in
Wheelbase: 1613 mm / 63.5 in
Seat Height: 718.8 mm / 28.3 in
Ground Clearance: 119.4 mm / 4.7 in
Dry Weight: 327 kg / 721 lbs
Wet Weight: 344 kg / 757 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Harley Davidson FLHRS/I Road King Custom (2004-05) appeared first on MotorcycleSpecifications.com.

]]> Honda CB125 (1976-77) https://motorcyclespecifications.com/honda-cb125-1976-77-specs/ Sat, 25 Mar 2023 04:50:03 +0000 https://motorcyclespecifications.com/?p=30458 The Honda CB125 Disc was a motorcycle produced by Honda from 1976 to 1977. It had a four stroke, twin cylinder, OHC engine with a capacity of 124cc and a

The post Honda CB125 (1976-77) appeared first on MotorcycleSpecifications.com.

]]> The Honda CB125 Disc was a motorcycle produced by Honda from 1976 to 1977. It had a four stroke, twin cylinder, OHC engine with a capacity of 124cc and a compression ratio of 7.4:1. It had 2x Keihin 22mm slide type manual choke and used battery and coil ignition with kick start. The bike had a maximum power of 17hp at 11500rpm and a clutch system of multi-disc, wet. It had a 5-speed transmission with a final drive of chain gear ratio of 5th 9.46, 4th 11.10, 3rd 13.72, 2nd 17.81, and 1st 26.20. The front suspension was telescopic fork, 4.5in wheel travel while the rear suspension was swing arm, 2.6in wheel travel. The front brakes were single 240mm disc and the rear brakes were 130mm drum. The front tyre was 2.50 -18 while the rear tyre was 2.75 -18. It had a dry weight of 133kg and fuel capacity of 10 litres (10.6 US gal).

Technical specifications:

Make Model: Honda CB 125 Disc

Year: 1976 – 77
Engine: Four stroke, twin cylinder, OHC, 2 valve per cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 44 x 41mm
Cooling System: Air cooled
Compression Ratio: 7.4:1
Induction: 2x Keihin 22mm slide type manual choke
Ignition: Battery & coil
Starting: Kick
Max Power: 17 hp / 12.4 kW @ 11500 rpm
Max Torque: NA
Clutch: Multi-disc, wet
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 5th 9.46 / 4th 11.10 / 3rd 13.72 / 2nd 17.81 / 1st 26.20
Front Suspension: Telescopic fork, 4.5 in wheel travel.
Rear Suspension: Swing arm, 2.6 in wheel travel.
Front Brakes: Single 240mm disc
Rear Brakes: 130mm Drum
Front Tyre: 2.50 -18
Rear Tyre: 2.75 -18
Dry-Weight: 133 kg / 295.4 lbs
Fuel Capacity: 10 Litres / 10.6 US gal

The post Honda CB125 (1976-77) appeared first on MotorcycleSpecifications.com.

]]>