Gilera R1-125 Archives - MotorcycleSpecifications.com

CF Moto 150 Charm AutoMatic (2009)

admin — Mon, 03 Apr 2023 23:24:58 +0000

The CF Moto 150 Charm AutoMatic is a motorcycle with a four-stroke, single-cylinder, SOHC, two-valve engine and a capacity of 154cc. The compression ratio is 10.5:1 and it has a liquid-cooled cooling system. The bike is equipped with an automatic lubrication system and a carburetor for induction. The CDI ignition is electric and the bike is capable of generating a maximum power output of 10.8hp at 7500rpm and a maximum torque of 10.7Nm at 6500rpm. The bike uses a wet multi-plate clutch and has a shaft final drive. The front suspension is equipped with a hydraulic telescopic fork while the rear suspension is dual shock. The motorcycle has a single disc brake for both the front and rear wheels. The front tire size is 100/80-16 while the rear tire is 110/80-16. The bike has a wheelbase of 1384mm and a seat height of 813mm. The ground clearance of the bike is 160mm and it has a dry weight of 126kg. The fuel capacity of the bike is 8 liters or 2.1 US gallons.

Technical specifications:

Make Model: CF Moto 150 Charm AutoMatic

Year: 2009 –
Engine: Four stroke, Single cylinder, SOHC, 2 valve.
Capacity: 154 cc / 9.4 cu-in
Bore x Stroke: 57.0 x 58.6 mm
Compression Ratio: 10.5:1
Cooling System: Liquid cooled
Lubrication: Automatic
Induction: Carburetor
Ignition: CDI
Starting: Electric
Max Power: 10.8 hp / 8.8 kW @ 7500 rpm
Max Torque: 10.7 Nm / 6.8 lb-ft @ 6500rpm
Clutch: Wet multi-plate
Transmission: Automatic
Final Drive: Shaft
Front Suspension: Hydraulic telescopic fork
Rear Suspension: Dual Shock
Front Brakes: Single disc
Rear Brakes: Single disc
Front Tyre: 100/80-16
Rear Tyre: 110/80-16
Wheelbase: 1384 mm / 54.5 in
Seat Height: 813 mm / 32 in
Ground Clearance: 160 mm 6.3 in
Dry Weight: 126 kg / 277.8 lbs
Fuel Capacity: 8 Litres / 2.1 US gal

The post CF Moto 150 Charm AutoMatic (2009) appeared first on MotorcycleSpecifications.com.

Boss Hass V8 (1993)

admin — Mon, 03 Apr 2023 08:50:00 +0000

The Boss Hoss V8 motorcycle model from 1993 has a four-stroke engine made of cast iron, with a capacity of 5735 cc/350 cu-in, and is liquid-cooled. It has a compression ratio of 10.0:1 and uses a Holly 680 cfm Throttle Body for induction. The bike has electric starting and can reach a maximum power of 355 hp/264.7 kW at 5250 rpm and a maximum torque of 405 lb-ft/549 Nm at 3500 rpm. The two-speed semi-automatic transmission and belt final drive are similar to a car. The front suspension includes 63mm inverted forks that can adjust preload and have a wheel travel of 63.5mm. In contrast, the rear suspension features dual 330mm coilover shocks that can adjust preload. The front brakes consist of two 320mm discs with four-piston calipers, while the rear brake is a single 320mm disc with a one-piston caliper. The front tire size is 130/90-16, while the rear tire’s size is 230/60-15. The bike has a dry weight of 500 kg/1100 lbs, and its fuel capacity is not available. Overall, the Boss Hoss V8 motorcycle is a unique, powerful, and heavy bike with car-like features.

Technical specifications:

Make Model: Boss Hoss V8

Year: 1993
Engine: Four stroke, V8, cost iron block
Capacity: 5735 cc / 350 cu-in
Bore x Stroke: 101.6 x 88.4 mm
Cooling System: Liquid cooled
Compression Ratio: 10.0:1
Induction: Holly 680 cfm Throttle Body
Starting: Electric
Max power: 355 hp / 264.7 kW @ 5250 rpm
Max Torque: 405 lb-ft / 549 [email protected] 3500 rpm
Transmission: 2 Speed semi auto
Final Drive: Belt
Front Suspension: 63mm Inverted forks preload adjustable.63.5mm wheel travel.
Rear Suspension: Dual 330mm coilover shocks, preload adjustable.
Front Brakes: 2x 320mm disc 4 piston calipers
Rear Brakes: Single 320mm disc 1 piston caliper
Front Tyre: 130/90-16
Rear Tyre: 230/60-15
Dry Weight: 500 kg / 1100 lbs
Fuel Capacity: NA

The post Boss Hass V8 (1993) appeared first on MotorcycleSpecifications.com.

CF Moto 400NK (2017)

admin — Mon, 03 Apr 2023 02:17:56 +0000

The CF Moto 400NK motorcycle released in 2017 is powered by a four-stroke parallel twin cylinder, DOHC engine with 400.4 cc capacity and electronic fuel injection. It produces 40.9 hp of maximum power at 9000 rpm and has a maximum torque of 34.4 Nm at 7650 rpm. The motorcycle features a tubular steel diamond frame with a chain-driven final drive and an engine that functions as a fully-stressed member. It has a 41mm KYB upright telescopic fork on the front suspension and a KYB air-gas mixed rear suspension with 7 adjustable sections. The brakes consist of 2x 300mm discs with a 2-piston caliper on the front and a single 225mm disc with a 1-piston caliper on the rear. Additionally, the motorcycle is 795mm tall, has a ground clearance of 150mm, a dry weight of 193kg, and a fuel capacity of 17 litres.

Technical specifications:

Make Model: CF Moto 400NK

Year: 2017 –
Engine: Four stroke, Parallel twin cylinder, DOHC, 4 valve per cylinder with 180 degrees crankshaft, chain camshaft drive and single gear-driven counterbalancer
Capacity: 400.4 cc / 24.4 cu-in
Bore x Stroke: 68.4 x 54.5 mm
Compression Ratio: 11.1:1
Cooling System: Liquid cooled
Induction: Electronic Fuel Injection
Ignition: ECU
Starting: Electric
Max Power: 40.9 hp / 29.9 kW @ 9000 rpm
Max Torque: 34.4 Nm 25.4 lb-ft @ 7650 rpm
Clutch: Wet multi-plate
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel diamond frame employing engine as fully-stressed member
Front Suspension: 41mm KYB upright telescopic forks.
Rear Suspension: KYB air-gas mixed, with 7 adjustable sections.
Front Brakes: 2x 300mm discs, 2 piston caliper
Rear Brakes: Single 225mm disc, 1 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 160/60-17
Wheelbase: 1415 mm / 55.7 in
Seat Height: 795 mm / 31.3 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 193 kg / 425.5 lbs
Wet Weight: 206 kg / 454.2 lbs
Fuel Capacity: 17 Litres / 4.4 US gal

The post CF Moto 400NK (2017) appeared first on MotorcycleSpecifications.com.

CF Moto 650NK (2012-15)

admin — Sat, 01 Apr 2023 15:18:13 +0000

The CF Moto 650NK is a motorcycle produced between 2012-15. It has a four-stroke, parallel twin-cylinder, DOHC engine with 4 valves per cylinder and a capacity of 649cc. The bike has a compression ratio of 11.3:1 and is cooled with a liquid coolant system. It has electronic fuel injection and an ECU ignition system with electric start. The maximum power output is 69.7 hp at 8500 rpm and the maximum torque output is 62 Nm at 7000 rpm. The transmission is a six-speed with a wet multi-plate clutch and a chain-driven final drive. The frame is a tubular steel diamond frame that employs the engine as a fully-stressed member. The front suspension consists of a 41mm telescopic fork and the rear suspension is an extruded steel swingarm with tubular steel bracing and cantilever monoshock. The bike has front brakes with 2x 300mm discs and a 2 piston caliper, and a single 225mm disc with a 1 piston caliper for the rear brakes. The front and rear tires are 120/70-17 and 160/60-17, respectively. The wheelbase is 1415mm, seat height is 795mm, and the ground clearance is 150mm. The bike has a dry weight of 193kg and a wet weight of 206kg. The fuel capacity is 17 liters.

Technical specifications:

Make Model: CF Moto 650NK

Year: 2012 – 15
Engine: Four stroke, Parallel twin cylinder, DOHC, 4 valve per cylinder with 180 degrees crankshaft, chain camshaft drive and single gear-driven counterbalancer
Capacity: 649 cc / 39.6 cu-in
Capacity: Four stroke, Parallel twin cylinder, DOHC, 4 valve per cylinder with 180 degrees crankshaft, chain camshaft drive and single gear-driven counterbalancer
Bore x Stroke: 83.0 x 60.0 mm
Compression Ratio: 11.3:1
Cooling System: Liquid cooled
Induction: Electronic Fuel Injection
Ignition: ECU
Starting: Electric
Max Power: 69.7 hp / 51 kW @ 8500 rpm
Max Torque: 62 Nm / 45.7 lb-ft @ 7000 rpm
Clutch: Wet multi-plate
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel diamond frame employing engine as fully-stressed member
Front Suspension: 41mm Telescopic fork
Rear Suspension: Extruded steel swingarm with tubular steel bracing and cantilever monoshock
Front Brakes: 2x 300mm discs, 2 piston caliper
Rear Brakes: Single 225mm disc, 1 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 160/60-17
Wheelbase: 1415 mm / 55.7 in
Seat Height: 795 mm / 31.3 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 193 kg / 425.5 lbs
Wet Weight: 206 kg / 454.2 lbs
Fuel Capacity: 17 Litres / 4.4 US gal

The post CF Moto 650NK (2012-15) appeared first on MotorcycleSpecifications.com.

CF Moto 650NK ABS (2016)

admin — Sat, 01 Apr 2023 01:36:57 +0000

The CF Moto 650NK ABS motorcycle is a 2016 model powered by a four-stroke, parallel twin-cylinder, DOHC engine with a compression ratio of 11.3:1, liquid cooling, and electronic fuel injection. The bike has a maximum power of 69.7 hp at 8,500 rpm and a maximum torque of 62 Nm at 7,000 rpm. It has a six-speed transmission, a wet multi-plate clutch, and a chain final drive. Its tubular steel diamond frame employs the engine as a fully-stressed member. The front suspension consists of 41mm telescopic forks while the rear suspension is an extruded steel swingarm with tubular steel bracing and a Kyaba cantilever monoshock. Both front and rear brakes feature a Continental ABS system. The motorcycle’s wheelbase measures 1415 mm, seat height is 795 mm, and ground clearance is 150 mm. The bike weighs 193 kg dry with a fuel capacity of 17 litres. Overall, the CF Moto 650NK ABS is a middleweight sports bike with modern styling and high-performance specifications.

Technical specifications:

Make Model: CF Moto 650NK ABS

Year: 2016 –
Engine: Four stroke, Parallel twin cylinder, DOHC, 4 valve per cylinder with 180 degrees crankshaft, chain camshaft drive and single gear-driven counterbalancer
Capacity: 649 cc / 39.6 cu-in
Bore x Stroke: 83.0 x 60.0 mm
Compression Ratio: 11.3:1
Cooling System: Liquid cooled
Induction: EFI with 2 x 38mm ITT throttle bodies and single injector per cylinder
Ignition: ECU
Starting: Electric
Max Power: 69.7 hp / 51 kW @ 8500 rpm
Max Torque: 62 Nm / 45.7 lb-ft @ 7000 rpm
Clutch: Wet multi-plate
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel diamond frame employing engine as fully-stressed member
Front Suspension: 41mm Telescopic forks
Rear Suspension: Extruded steel swingarm with tubular steel bracing, Kyaba cantilever monoshock
Front Brakes: 2x 300mm discs, 2 piston caliper, Continental ABS System
Rear Brakes: Single 225mm disc, 1 piston caliper, Continental ABS System
Front Tyre: 120/70-17
Rear Tyre: 160/60-17
Wheelbase: 1415 mm / 55.7 in
Seat Height: 795 mm / 31.3 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 193 kg / 425.5 lbs
Wet Weight: 206 kg / 454.2 lbs
Fuel Capacity: 17 Litres / 4.4 US gal

The post CF Moto 650NK ABS (2016) appeared first on MotorcycleSpecifications.com.

CF Moto 250 Freedom Scooter (2007)

admin — Thu, 30 Mar 2023 10:51:56 +0000

The CF Moto 250 Freedom/Fashion scooter was produced in 2007 and has a four stroke, single cylinder, SOHC, 2 valve engine with a capacity of 244cc/14.8cu-in. It has a bore x stroke of 72.0 x 60.0 mm, a compression ratio of 10.0:1, and is liquid cooled. The scooter has an automatic lubrication system and uses a Kehien carburetor for induction. The ignition is CDI and it has an electric starting system. The scooter has a maximum power of 14.3 hp/10.5 kW @ 7000 rpm and a maximum torque of 15 Nm/11.1 lb-ft @ 6000 rpm. The clutch is a wet multi-plate and the transmission is automatic with a final drive belt. The frame of the scooter is made of steel and it has a hydraulic telescopic fork front suspension and dual shock rear suspension. The front brake is a single disc and the rear brake is a drum. The front tire size is 110/90-12 and the rear tire size is 120/90-10. The wheelbase measures 1625 mm/64.0 in and the seat height is 686 mm/27.0 in. The scooter has a dry weight of 162.0 kg/357.1 lbs and a fuel capacity of 12 liters/3.2 US gal.

Technical specifications:

Make Model: CF Moto 250 Freedom / Fashion

Year: 2007-
Engine: Four stroke, Single cylinder, SOHC, 2 valve.
Capacity: 244 cc / 14.8 cu-in
Bore x Stroke: 72.0 x 60.0 mm
Compression Ratio: 10.0:1
Cooling System: Liquid cooled
Lubrication: Automatic
Induction: Kehien carburetor
Ignition: CDI
Starting: Electric
Max Power: 14.3 hp / 10.5 kW @ 7000 rpm
Max Torque: 15 Nm / 11.1 lb-ft @ 6000 rpm
Clutch: Wet multi-plate
Transmission: Automatic
Final Drive: Belt
Frame: Steel
Front Suspension: Hydraulic telescopic fork
Rear Suspension: Dual shocks
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 110/90-12
Rear Tyre: 120/90-10
Wheelbase: 1625 mm / 64.0 in
Seat Height: 686 mm / 27.0 in
Dry Weight: 162.0 kg / 357.1 lbs
Fuel Capacity: 12 Litres / 3.2 US gal

The post CF Moto 250 Freedom Scooter (2007) appeared first on MotorcycleSpecifications.com.

Gilera R1-125 (1988-89)

admin — Wed, 29 Mar 2023 21:35:56 +0000

The Gilera R1 125 is a motorcycle produced in 1988-89 with a two-stroke engine, single cylinder, and reed valve. It has a capacity of 124cc/7.6 cu-in with 13.0;1 compression ratio and a 28 Dell’Orto PHBH carburetor. It is equipped with electric ignition, has electric starting, and produces a max power of 29.3 hp/21.8 kW @ 9900 rpm. It has a multi-disc oil bath clutch and a 6-speed transmission with a final drive chain. This bike features telescopic forks for front suspension and swing arm gas single shock for the rear suspension. It has a front single 240mm disc brake and a rear drum brake. The front tire size is 2.75-21, while the rear tire size is 4.10-17. The dry weight is 115 kg/253 lbs, while the wet weight is 134 kg/295 lbs. The bike has a fuel capacity of with an average consumption of 19.8 km/lit. The Gilera R1 125 can go from 0-60 in 13.4 m and 0-100 in 40.9 m. Its standing 1/4 mile is 16.3 sec/122.2 km/h and can reach a top speed of 134.4 km/h.

Technical specifications:

Make Model: Gilera R1 125

Year: 1988 – 89
Engine: Two stroke, single cylinder, reed valve
Capacity: 124 ccc / 7.6 cu-in
Bore x Stroke: 56 x 50.5 mm
Cooling System: Liquid cooled
Compression Ratio: 13.0;1
Induction: 28 Dell’Orto PHBH carburetors
Ignition: Electric ignition with capacitive output
Starting: Electric
Max Power: 29.3 hp / 21.8 kW @ 9900 rpm
Max Power Rear Tyre: 25.3 hp @ 9500 rpm
Max Torque: 18 Nm / 13.2 lb-ft @ 10250 rpm
Clutch: Multi-disc oil bath
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swing arm gas single shock
Front Brakes: Single 240mm disc
Rear Brakes: Drum
Front Tyre: 2.75-21
Rear Tyre: 4.10-17
Dry Weight: 115 kg / 253 lbs
Wet Weight: 134 kg / 295 lbs
Fuel Capacity:
Consumption Average: 19.8 km/lit
Braking 60 – 0 / 100 – 0: 13.4 m / 40.9 m
Standing 1/4 Mile: 16.3 sec / 122.2 km/h
Top Speed: 134.4 km/h

The post Gilera R1-125 (1988-89) appeared first on MotorcycleSpecifications.com.

CF Moto 150 Jewel AutoMatic (2008)

admin — Tue, 28 Mar 2023 12:57:59 +0000

The CF Moto 150 Jewel AutoMatic is a motorcycle from 2008 with a four-stroke, single-cylinder engine with a capacity of 154cc. It has a liquid-cooled cooling system and automatic lubrication with a carburetor induction and CDI ignition. This motorcycle has a maximum power output of 10.8 hp at 7500 rpm and a maximum torque of 10.7 Nm at 6500rpm. The clutch is wet multi-plate with an automatic transmission and final drive by shaft. The front suspension is a hydraulic telescopic fork while the rear suspension is a dual shock. It uses single disc brakes on both the front and rear with front and rear tires of 100/80-16 and 110/80-16, respectively. The seat height is 813 mm with a ground clearance of 160 mm and a dry weight of 126 kg. It holds 8 liters of fuel in the tank.

Technical specifications:

Make Model: CF Moto 150 Jewel AutoMatic

Year: 2008 –
Engine: Four stroke, Single cylinder, SOHC, 2 valve.
Capacity: 154 cc / 9.4 cu-in
Bore x Stroke: 57.0 x 58.6 mm
Compression Ratio: 10.5:1
Cooling System: Liquid cooled
Lubrication: Automatic
Induction: Carburetor
Ignition: CDI
Starting: Electric
Max Power: 10.8 hp / 8.8 kW @ 7500 rpm
Max Torque: 10.7 Nm / 6.8 lb-ft @ 6500rpm
Clutch: Wet multi-plate
Transmission: Automatic
Final Drive: Shaft
Front Suspension: Hydraulic telescopic fork
Rear Suspension: Dual Shock
Front Brakes: Single disc
Rear Brakes: Single disc
Front Tyre: 100/80-16
Rear Tyre: 110/80-16
Wheelbase: 1384 mm / 54.5 in
Seat Height: 813 mm / 32 in
Ground Clearance: 160 mm 6.3 in
Dry Weight: 126 kg / 277.8 lbs
Fuel Capacity: 8 Litres / 2.1 US gal

The post CF Moto 150 Jewel AutoMatic (2008) appeared first on MotorcycleSpecifications.com.

Brammo Empulse LE (2014)

admin — Tue, 28 Mar 2023 08:40:01 +0000

The Brammo Empulse Police LE is a motorcycle released in 2014, with an electric engine powered by a Brammo Powerc BPM15/90 Lithium-Ion battery pack that holds a 9.31kWh nominal capacity and a 10.2kWh maximum capacity. Recharge time ranges from 2.0 hours for typical Level II charging to 8.0 hours for maximum Level I charging. The battery has an approximate lifespan of 1,500 cycles, around 100,000 miles to 80% initial capacity. The bike has a maximum power output of 40 kW/54 hp, a maximum torque of 90 Nm/66.4 ft.lb, and a 6-speed IET transmission. It has a lightweight aluminum frame, a rake of 24 degrees, and a 1473 mm wheelbase. The Empulse LE features front and rear suspension, dual front brakes with twin four-piston hydraulic calipers, and a single rear brake with a dual-piston hydraulic caliper. It has a regenerative braking system that returns energy to the battery system while decelerating. The driving range is approximately 121 miles in the city, 56 miles on the highway, and 77 miles combined. It has a top speed of 169 km/h or 105 mph.

Technical specifications:

Make Model: Brammo Empulse Police LE

Year: 2014
Motor: Parker GVM IPM, Sevcon Gen 4, Size 6 (650A peak)
Throttle: Ride by wire
Battery: Brammo Power c BPM15/90 Lithium-Ion (NCM Chemistry)
Battery Pack Capacity: 9.31 kWh (nominal), 10.2 kWh (max)
Battery Pack Voltage: 103.6 V (nominal), 117.6 Vdc (max)
Recharge Time: 2.0 hrs (typical, Level II charging from 20 to 80% SOC) 3.5 hrs (maximum, Level II charging from 0 to 100% SOC) 8.0 hrs (maximum, Level I charging from 0 to 100% SOC)
Battery Life: 1,500 cycles (approx.100,000 miles) to 80% initial capacity
Starting: Electric
Max Power: 40 kW / 54 hp @ 4500 rpm
Max Torque: 90 Nm / 9.18 kgf-m / 66.4 ft.lb
Clutch: Multi-plate, hydraulic activated wet clutch
Transmission: IET c 6 speed
Final Drive: Chain, 520 O-ring
Final Drive Ratio: 14:48
Frame: Brammo E-Beam Aluminum, Fabricated by Accossato in Italy. Lightweight extruded and welded aluminum – serves a battery tray (patent pending). Sub-frame of tubular steel
Rake: 24 degrees
Trail: 97 mm / 3.8″
Front Suspension: Semi-Adjustable ~A43 mm Marzocchi forks
Rear Suspension: Tubular steel swingarm, semi-adjustable Sachs Shock
Front Brakes: Dual ~A310 mm Brembo floating disk with twin four piston hydraulic Brembo brake calipers, radial mount.
Rear Brakes: Brembo single disk with dual piston hydraulic Brembo brake caliper
Front Wheel: 3.50 x 17″ Marchesini
Rear Wheel: 5.5 x 17″ Marchesini
Front Tyre: 120/70-17 AVON AV79
Rear Tyre: 180/55-17 AVON AV80
Dimensions: Length: 2065 mm / 81.3″ Width: 808 mm / 31.8″ Height: 1082 mm / 42.6″
Wheelbase: 1473 mm / 58.0″
Ground Clearance: 185 mm / 7.3″
Seat Height: 800 mm / 31.5″
Weight: 213 kg / 470 lbs
GVWR: 380 kg / 838 lbs
Regenerative Braking: Under deceleration, energy is returned to the battery system to both extend driving range and provide familiar rider feedback.
Driving Range: City: 121 miles* / 195 km Highway: 56 miles** / 90 km Combined: 77 miles*** / 124 km *SAE City Riding Range Test Procedure for Electric Motorcycles (variable speed, 19 mph / 30km/h average) **SAE Highway / Constant Speed Riding Range Test Procedure for Electric Motorcycles (70 mph / 113 km/h sustained) *** SAE Highway Commuting Cycle (.5 City weighting, .5 Highway weighting)
Top Speed: 169 km/h / 105 mph

The post Brammo Empulse LE (2014) appeared first on MotorcycleSpecifications.com.

CF Moto 150NK (2015)

admin — Mon, 27 Mar 2023 23:03:53 +0000

The 2015 CF Moto 150NK motorcycle has a four-stroke, single-cylinder engine with a capacity of 154cc, a compression ratio of 10.5:1, and is liquid-cooled with automatic lubrication. It features fuel injection and electronic control unit ignition, has a six-speed transmission with chain final drive, and a tubular lattice frame. The front suspension is an upside-down telescopic fork, while the rear has a single shock. The motorcycle’s brakes are single disc and the front and rear tires are 100/80-R17 and 130/70-R17 respectively. With a wheelbase of 1360mm and a seat height of 785mm, the CF Moto 150NK weighs 142kg and has a fuel capacity of 10 liters.

Technical specifications:

Make Model: CF Moto 150NK

Year: 2015 –
Engine: Four stroke, Single cylinder, SOHC, 2 valve.
Capacity: 154 cc / 9.4 cu-in
Bore x Stroke: 57.0 x 58.6 mm
Compression Ratio: 10.5:1
Cooling System: Liquid cooled
Lubrication: Automatic
Induction: Fuel injection. EFI
Ignition: ECU
Starting: Electric
Max Power: 10.8 hp / 8.8 kW @ 7500 rpm
Max Torque: 10.7 Nm / 6.8 lb-ft @ 6500rpm
Clutch: Wet multi-plate
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular lattice frame
Front Suspension: Upside down telescopic fork
Rear Suspension: Single shock
Front Brakes: Single disc
Rear Brakes: Single disc
Front Tyre: 100/80-R17
Rear Tyre: 130/70-R17
Wheelbase: 1360 mm / 53.5 in
Seat Height: 785 mm / 30.9 in
Wet Weight: 142 kg / 313 lbs
Fuel Capacity: 10 Litres / 2.6 US gal

The post CF Moto 150NK (2015) appeared first on MotorcycleSpecifications.com.

Boss Hoss BHC (2009 / 376ci)

admin — Mon, 27 Mar 2023 22:36:00 +0000

The Boss Hoss BHC-9 ZZ4 is a four-stroke, V8 motorcycle with a liquid-cooled engine and a capacity of 5735 cc / 350 cu-in. With a max power of 355 hp / 264.7 kW and max torque of 405 lb-ft / 549 Nm, it has a 2-speed semi-auto transmission and a belt final drive. The front suspension features 63mm inverted forks, preload adjustable, while the rear has dual 330mm coilover shocks, preload adjustable. It has 2x 320mm disc 4-piston caliper front brakes and 2x 228mm drum rear brakes. The front and rear tires are sized 130/90-16 and 2x 275/60-15 respectively. With a dry weight of 680 kg / 1500 lbs and a fuel capacity of 32 litres / 8.5 US gal, the Boss Hoss BHC-9 ZZ4 boasts an impressive performance for motorcycle enthusiasts.

Technical specifications:

Make Model: Boss Hoss BHC-9 ZZ4

Engine: Four stroke, V8, cost iron block
Capacity: 5735 cc / 350 cu-in
Bore x Stroke: 101.6 x 88.4 mm
Cooling System: Liquid cooled
Compression Ratio: 10.0:1
Induction: Holly 680 cfm Throttle Body
Starting: Electric
Max power: 355 hp / 264.7 kW @ 5250 rpm
Max Torque: 405 lb-ft / 549 [email protected] 3500 rpm
Transmission: 2 Speed semi auto
Final Drive: Belt
Front Suspension: 63mm Inverted forks preload adjustable.63.5mm wheel travel.
Rear Suspension: Dual 330mm coilover shocks, preload adjustable.
Front Brakes: 2x 320mm disc 4 piston calipers
Rear Brakes: 2x 228mm drum
Front Tyre: 130/90-16
Rear Tyre: 2x 275/60-15
Dry Weight: 680 kg / 1500 lbs
Fuel Capacity: 32 Litres / 8.5 US gal

The post Boss Hoss BHC (2009 / 376ci) appeared first on MotorcycleSpecifications.com.

Boss Hoss BHC (2009 / 376ci)

admin — Mon, 27 Mar 2023 09:58:00 +0000

The Boss Hoss BHC-9 502 motorcycle has a four-stroke, V8, cast iron block engine with a capacity of 8226.8cc or 502 cubic inches. It is liquid-cooled and has a compression ratio of 9.6:1. The carburettor is a Quadrajet 850cfm, and it has an electric starting system. The maximum power is 502 horsepower or 374 kilowatts, and the maximum torque is 567 lb-ft or 768 Nm. The transmission/drive is a 2 speed semi-automatic with belt final drive. The front suspension consists of 60mm inverted forks that are preload adjustable, with 63.5mm wheel travel, while the rear suspension is dual 330mm coilover shocks that are also preload adjustable. The brakes are 2x 320mm discs with 4 piston calipers in the front and 2x 228mm drums in the rear. The front tyre size is 130/90-16, and the rear has two 275/60-15 tyres. The dry weight of the bike is 771kg or 1700lbs, and it has a fuel capacity of 32 litres or 8.5 US gallons.

Technical specifications:

Make Model: Boss Hoss BHC-9 502

Engine: Four stroke, V8, cost iron block
Capacity: 8226.8 cc / 502 cu-in
Bore x Stroke:
Cooling System: Liquid cooled
Compression Ratio: 9.6:1
Induction: Quadrajet 850cfm Carburettor
Starting: Electric
Max power: 502 hp / 374 kW
Max Torque: 567 lb-ft / 768 Nm
Transmission / Drive: 2 Speed semi auto
Final Drive: Belt
Front Suspension: 60mm Inverted forks preload adjustable.63.5mm wheel travel.
Rear Suspension: Dual 330mm coilover shocks, preload adjustable.
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: 2x 228mm drum
Front Tyre: 130/90-16
Rear Tyre: 2x 275/60-15
Dry Weight: 771 kg / 1700 lbs
Fuel Capacity: 32 Litres / 8.5 US gal

The post Boss Hoss BHC (2009 / 376ci) appeared first on MotorcycleSpecifications.com.

Boss Hoss BHC (1999)

admin — Sat, 25 Mar 2023 18:03:12 +0000

The Boss Hoss BHC-3 ZZ4SS motorcycle is a four stroke, V8 bike with a 5735 cc engine and liquid cooling. It has a maximum power of 355 horsepower at 5250 rpm and a maximum torque of 405 lb-ft at 3500 rpm. The bike has a 2-speed semi-auto transmission and a belt final drive. The front suspension is 63mm inverted forks with preload adjustable and 63.5mm wheel travel, while the rear suspension is dual 330mm coilover shocks with preload adjustable. The front brakes consist of 2x 320mm discs with 4 piston calipers, and the rear brakes are a single 320mm disc with 1 piston caliper. The front tire is 130/90-16, and the rear tire is 230/60-15. The bike has a dry weight of 500 kg (1100 lbs) and an undisclosed fuel capacity.

Technical specifications:

Make Model: Boss Hoss BHC-3 ZZ4SS

Engine: Four stroke, V8, cost iron block
Capacity: 5735 cc / 350 cu-in
Bore x Stroke: 101.6 x 88.4 mm
Cooling System: Liquid cooled
Compression Ratio: 10.0:1
Induction: Holly 680 cfm Throttle Body
Starting: Electric
Max power: 355 hp / 264.7 kW @ 5250 rpm
Max Torque: 405 lb-ft / 549 [email protected] 3500 rpm
Transmission: 2 Speed semi auto
Final Drive: Belt
Front Suspension: 63mm Inverted forks preload adjustable.63.5mm wheel travel.
Rear Suspension: Dual 330mm coilover shocks, preload adjustable.
Front Brakes: 2x 320mm disc 4 piston calipers
Rear Brakes: Single 320mm disc 1 piston caliper
Front Tyre: 130/90-16
Rear Tyre: 230/60-15
Dry Weight: 500 kg / 1100 lbs
Fuel Capacity: NA

The post Boss Hoss BHC (1999) appeared first on MotorcycleSpecifications.com.

Brammo Empulse (2012)

admin — Sat, 25 Mar 2023 02:49:14 +0000

The Brammo Empulse is a 2012 electric motorcycle that uses a high output sealed brushless permanent magnet AC motor and Brammo Power c Lithium-Ion NCM battery pack. It has a capacity of 6.2 kWh and can be fully charged in approximately 7.5 hours from 0% SOC. The battery pack has a lifespan of 1,500 cycles to 80% initial capacity. The motorcycle has an electric starting system, delivers a max power of 13 kW / 17 hp @ 4500 rpm, and a max torque of 40 Nm @ 0 – 1450 rpm. It has a clutchless transmission and a lightweight extruded and welded aluminum frame that serves as a battery tray. The front suspension is a Marzocchi Shiver hydraulic USD with compression damping adjustment and the rear suspension is a Works Performance hydraulic with pre-load and rebound damping adjustment. The front and rear brakes are hydraulic Brembo brakes, and it has cast aluminum wheels. The motorcycle weighs 150 kg / 330 lbs and has a driving range of 80 miles/129 km in the city, 45 miles/72 km at 55 mph/88 km/h on the highway, and a combined range of 57.6 miles/93 km. The top speed is 95 km/h / 60 mph. It also features regenerative braking, which returns energy to the battery system, extending driving range and providing rider feedback.

Technical specifications:

Make Model: Brammo Enertia Hong Kong Police

Year: 2012
Motor: High output sealed brushless permanent magnet AC
Battery: Brammo Power c Lithium-Ion NCM
Battery Pack Capacity: 6.2 kWh (nominal)
Battery Pack Voltage: 88.8 V (nominal)
Recharge Time: 2Approximately 7.5 hours from 0% SOC
Battery Life: 1,500 cycles to 80% initial capacity
Starting: Electric
Max Power: 13 kW / 17 hp @ 4500 rpm
Max Torque: 40 Nm / 4.08 kgf-m / 29.5 ft.lb @ 0 – 1450 rpm
Clutch: Clutchless
Transmission: Continuous
Frame: Lightweight extruded and welded aluminum – serves as a battery tray
Front Suspension: Marzocchi Shiver hydraulic USD with compression damping adjustment.
Front Wheel Travel: 127.5 mm / 5.0:
Rear Suspension: Works Performance hydraulic with pre-load and rebound damping adjustment.
Rear Wheel Travel: 127.5 mm / 5.0:
Front Brakes: Brembo hydraulic
Rear Brakes: Brembo hydraulic
Front Wheel: 2.50 x 18″ Cast aluminum
Rear Wheel: 3.5 x 17″ Cast aluminium
Dimensions: Length: 2070 mm / 81.5″ Width: 840 mm / 33.0″
Seat Height: 810 mm / 32.0″
Weight: 150 kg / 330 lbs
GVWR: 272 kg / 600 lbs
Regenerative Braking: Under deceleration, energy is returned to the battery system to both extend driving range and provide familiar rider feedback.
Driving Range: City: 80 miles/ 129* km Highway: (@55mph/88km/h): 45 miles/ 72 km** Combined: 57.6 miles/ 93 km*** *SAE City Riding Range Test Procedure for Electric Motorcycles (variable speed, 19 mph / 30km/h average) **SAE Highway / Constant Speed Riding Range Test Procedure for Electric Motorcycles (55 mph / 88 km/h sustained) *** SAE Highway Commuting Cycle (.5 City weighting, .5 Highway weighting)
Top Speed: 95 km/h / 60 mph

The post Brammo Empulse (2012) appeared first on MotorcycleSpecifications.com.

CF Moto 650MT (2017)

admin — Fri, 24 Mar 2023 18:23:59 +0000

The CF Moto 650MT is a 2017 motorcycle with a four stroke, parallel twin cylinder engine, offering 649cc capacity and creating 69.7 hp at 8500 rpm with maximum torque of 62 Nm at 7000 rpm. It boasts EFI with two 38mm ITT throttle bodies and a single injector per cylinder, with a wet multi-plate clutch and six-speed transmission. The final drive is via a chain, and the frame is constructed from tubular steel diamond. Suspension is handled by a 41mm telescopic fork at the front and a Kyaba cantilever monoshock with extruded steel swingarm and tubular steel bracing at the rear. Brakes are a combination of 2x 300mm discs with a two-piston caliper, and a single 225mm disc with a one-piston caliper, both incorporating the Continental ABS System. The tire sizes are 120/70-17 and 160/60-17, with a wheelbase of 1415mm, a seat height of 840mm, and a ground clearance of 170mm. It has a dry weight of 185.7kg, a wet weight of 206kg, and a fuel capacity of 18 liters.

Technical specifications:

Make Model: CF Moto 650MT

Year: 2017 –
Engine: Four stroke, Parallel twin cylinder, DOHC, 4 valve per cylinder with 180 degrees crankshaft, chain camshaft drive and single gear-driven counterbalancer
Capacity: 649 cc / 39.6 cu-in
Bore x Stroke: 83.0 x 60.0 mm
Compression Ratio: 11.3:1
Cooling System: Liquid cooled
Induction: EFI with 2 x 38mm ITT throttle bodies and single injector per cylinder
Ignition: ECU
Starting: Electric
Max Power: 69.7 hp / 51 kW @ 8500 rpm
Max Torque: 62 Nm / 45.7 lb-ft @ 7000 rpm
Clutch: Wet multi-plate
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel diamond frame employing engine as fully-stressed member
Front Suspension: 41mm Telescopic Fork
Rear Suspension: Extruded steel swingarm with tubular steel bracing, Kyaba cantilever monoshock
Front Brakes: 2x 300mm discs, 2 piston caliper, Continental ABS System
Rear Brakes: Single 225mm disc, 1 piston caliper, Continental ABS System
Front Tyre: 120/70-17
Rear Tyre: 160/60-17
Wheelbase: 1415 mm / 55.7 in
Seat Height: 840 mm / 33.1 in
Ground Clearance: 170 mm / 6.7 in
Dry Weight: 185.7 kg / 409.5 lbs
Wet Weight: 206 kg / 454 lbs
Fuel Capacity: 18 Litres / 4.7 US gal

The post CF Moto 650MT (2017) appeared first on MotorcycleSpecifications.com.

Boss Hoss BHC (2009 / 376ci)

admin — Fri, 24 Mar 2023 17:01:57 +0000

The Boss Hoss BHC-9 LS3 Trike is a motorcycle with a four stroke V8 engine, liquid cooling, and a capacity of 6200cc. It has a maximum power of 425hp and max torque of 603.42Nm. The bike also features a 3-speed automatic transmission, shaft final drive, and adjustable suspension. It has dual four-piston calipers and 12.6″ floating discs for front brakes and a single four-piston caliper and 12.6″ floating disc for the rear brake. The seat height is 766mm and the dry weight is 660kg. It has a fuel capacity of 32.17 litres.

Technical specifications:

Make Model: Boss Hoss BHC-9 LS3 Trike

Year: 2009 / 376 ci
Engine: Four stroke, V8, cost iron block
Capacity: 6200 cc / 378 cu-in
Bore x Stroke:
Cooling System: Liquid cooled
Compression Ratio: 10.7:1
Induction: Fuel Injection Multi-port
Starting: Electric
Max power: 425 hp / 317 kW @ 5750 rpm
Max Torque: 603.42 Nm / 61.5 kgf-m / 445.1 lb-ft @ 4750 rmm
Transmission / Drive: 3-speed automatic
Final Drive: Shaft
Front Suspension: Inverted forks, 63 mm, adjustable preload,
Rear Suspension: Dual 13.0 inch coilover shocks, adjustable preload
Front Brakes: Dual four-piston calipers, 12.6″ floating disc
Rear Brakes: Single four-piston caliper, 12.6″ floating disc
Front Tyre: 130/90-16
Rear Tyre: 2x 275/60-15
Seat Height: 766 mm / 29 in
Dry Weight: 660 kg / 1,455 lbs
Fuel Capacity: 32.17 Litres / 8.5 US gal

The post Boss Hoss BHC (2009 / 376ci) appeared first on MotorcycleSpecifications.com.