Gilera Nexus 250 Archives - MotorcycleSpecifications.com

Derbi Senda Terra 125 (2007-08)

admin — Tue, 04 Apr 2023 13:13:04 +0000

The Derbi Senda Terra 125 is a lightweight off-road motorcycle with a four-stroke, single cylinder OHC engine and a 124cc capacity. It has a compression ratio of 11.0:1 and uses electronic ignition. The bike has a maximum power output of 9 kW at 6,500rpm and 9 Nm of torque at the same speed. The clutch is a multiplate system and it has a five-speed transmission. With a tubular steel frame and telescopic forks in the front, the bike can handle travel of 150mm across both the front and rear suspension. The braking system utilizes single discs for both the front and rear with a 280mm disc on the front and a 220mm disc on the rear. The Derbi Senda Terra 125 runs on 100/90-18 front and 130/80-17 rear tires, with a seat height of 815mm and a dry weight of 117kg. The motorcycle can hold 12 liters of fuel in its tank which has a capacity of 3.1 US gal.

Technical specifications:

Make Model: Derbi Senda Terra 125

Year: 2007 – 08
Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Frame: Tubular steel frame
Front Suspension: 37mm Telescopic forks
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Paoli monoshock
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: Single 280mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 100/90- 18
Rear Tyre: 130/80- 17
Seat Height: 815 mm / 32.0 in
Dry Weight: 117 kg / 258 lbs
Fuel Capacity: 12 Litres / 3.1 US gal

The post Derbi Senda Terra 125 (2007-08) appeared first on MotorcycleSpecifications.com.

Vespa PX 125 (2008-13)

admin — Tue, 04 Apr 2023 01:51:01 +0000

The Vespa PX125 motorcycle model was produced between 2008 and 2013. Its engine is a single cylinder, two-stroke with a capacity of 123.4 cc, and it has a bore x stroke of 52.5 x 57 mm. The cooling system for the engine is air cooled with a centrifugal fan. The fuel mixture is 1:50, and the ignition system is CDI. The motorcycle has a kick start and a wet, multiplate clutch. Its maximum power is 8.8 kW, and its maximum torque is 9.6 Nm with a 4-speed, grip-shift, constant mesh transmission. It has a direct drive final drive and a pressed sheet steel, streamlined monocoque structure frame. The front suspension has a link arm with a coil spring and a dual-action hydraulic shock absorber, while the engine and transmission serve as the swingarm for the rear suspension with a dual-action shock absorber. The front brakes are 200 mm single disc, and the rear brakes are 150 mm expanding drum. The motorcycle has alloy wheels with a front tyre of 110/70-11 and a rear tyre of 120/70-11. Its dimensions are 1810 mm in length, 740 mm in width, and 1260 mm in wheelbase. Its seat height is 810 mm, and its dry weight is 95 kg. The fuel capacity is 8 L, with a reserve of 2.5 L. Its consumption average is 2.7 L/100 km, and it can reach a top speed of 90 km/h. The available colors are midnight blue, Excalibur silver, and black.

Technical specifications:

Make Model: Vespa PX125

Year: 2008 – 13
Engine: Single cylinder, 2 stroke
Capacity: 123.4 cc 7.5 cub in
Bore x Stroke: 52.5 x 57 mm
Cooling: Air cooled, centrifugal fan
Fuel Mixture: 1:50
Ignition: CDI
Starting: Kick start
Clutch: Wet, multiplate
Max Power: 8.8 kW / 12 hp @ 6600 rpm
Max Torque: 9.6 Nm / 1.0 kgf-m / 7.1 ft/lb @ 6000 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Link arm with coil spring and dual action hydraulic shock absorber
Rear Suspension: Engine and transmission serve as swingarm, dual action shock absorber
Front Brakes: 200 mm single disc
Rear Brakes: 150 mm expanding drum
Wheels: Alloy
Front Tyre: 110/70-11
Rear Tyre: 120/70-11
Dimensions: Length: 1810 mm / 71.5 in Width: 740 mm / 29.1 in
Wheelbase: 1260 mm / 49.7 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 95 kg / 209 lbs
Fuel Capacity: 8 L / 2.1 US gal
Reserve: 2.5 L / 0.66 US gal
Consumption average: 2.7 L/100 km / 37 km/l / 87 US mpg
Top Speed: 90 km/h / 56 mph
Colours: Midnight blue, Excalibur silver, Black

The post Vespa PX 125 (2008-13) appeared first on MotorcycleSpecifications.com.

Gilera Nexus 250 (2009)

admin — Sun, 02 Apr 2023 08:26:04 +0000

The Gilera Nexus 250 is a motorcycle from 2009 powered by a four stroke, single cylinder, SOHC, 4 valves engine with a capacity of 249 cc. It has a liquid cooling system and a compression ratio of 11.5:1. The motorcycle has a maximum power of 22.1 hp at 8050 rpm and a maximum torque of 20.2 Nm at 6500 rpm. It has a twist-and-go CVT transmission and uses RON 95 unleaded petrol for induction. The frame is made of high-strength steel tubes in a double cradle trellis design. The front suspension is a telescopic hydraulic fork with 35 mm shafts and the rear suspension is a double hydraulic shock absorber with a four-position spring preload. The front and rear brakes are single discs measuring 260mm and 240mm, respectively. The motorcycle has a wheelbase of 1530 mm and a seat height of 810mm. It has a dry weight of 174.0 kg and a fuel capacity of 15 litres.

Technical specifications:

Make Model: Gilera Nexus 250

Year: 2009 –
Engine: Four stroke, single cylinder, SOHC,4 valves
Capacity: 249 cc / 12.2 cu-in
Bore x Stroke: 72 X 60 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: RON 95 unleaded petrol
Ignition: Electronic CDI
Starting: Electric
Max Power: 22,1 hp / 16.1 kW @ 8050 rpm
Max Torque: 20.2 Nm / 14.9 lb-ft @ 6500 rpm
Transmission / Drive: Twist-and-go CVT
Frame: Double cradle trellis made of high-strength steel tubes
Front Suspension: Telescopic hydraulic fork with f 35 mm shafts; 94 mm wheel travel
Rear Suspension: Double hydraulic shock absorber with four-position spring preload; 76 mm wheel travel
Front Brakes: Single 260mm disc
Rear Brakes: Single 240 disc
Front Tyre: 120/70-14
Rear Tyre: 140/60-14
Wheelbase: 1530 mm / 60.2 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 174.0 kg / 383.6 lbs
Wet Weight: 186.0 kg / 410.1 lbs
Fuel Capacity: 15 Litres / 3.9 US gal

The post Gilera Nexus 250 (2009) appeared first on MotorcycleSpecifications.com.

Hyosung GT 650R (2013-14)

admin — Sun, 02 Apr 2023 06:43:01 +0000

The Hyosung GT 650R is a motorcycle that was produced from 2013-14. It has a four-stroke, 90 degrees V twin, DOHC engine with a capacity of 647 cc. The engine is liquid-cooled with a compression ratio of 11.4:1 and is lubricated with semi-synthetic, 10W/40 oil. The fuel injection includes an immobilizer, and the ignition is digital CDI with electric starting. The bike has a maximum power of 80.2 hp and a maximum torque of 68 Nm, with a wet, multiple discs, cable-operated clutch and a six-speed transmission. The final drive is a chain. The frame is made of steel with a double pipe, and the front suspension includes 41mm oil upside-down forks with 120mm of travel. The rear suspension is a swinging arm with a travel of 100mm. The front brake consists of 2x 300mm discs with 2 piston calipers, while the rear brake is a single 230mm disc with a 2 piston caliper. The front tire is 120/60-17, and the rear tire is 160/60-17. The bike has a length of 2095mm, a width of 700mm, and a height of 1090mm, with a wheelbase of 1435mm and a seat height of 830mm. The ground clearance is 165mm, and the dry weight is 195kg, with a wet weight of 210kg. The fuel capacity is 17 liters or 3.1 US gallons.

Technical specifications:

Make Model: Hyosung GT 650R

Year: 2013 – 14
Engine: Four stroke, 90 degrees V twin, DOHC, 4 valve per cylinder
Capacity: 647 cc / 39.4 cu-in
Bore x Stroke: 81.5 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.4:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/40
Induction: Fuel Injection (include immobilizer)
Ignition: Digital CDI
Starting: Electric
Max Power: 80.2 hp / 59 kW @ 9000 rpm
Max Torque: 68 Nm / 6.93 kg-m @ 7500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel, double pipe
Front Suspension: 41mm Oil upside down forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swinging arm
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm discs
Rear Brakes: Single 230mm disc
Front Brakes: 2x 300mm discs 2 piston calipers
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 120/60 -17
Rear Tyre: 160/60 -17
Dimensions: Length 2095 mm / 82.4 in Width 700 mm / 27.5 in Height 1090 mm / 42.9 in
Wheelbase: 1435 mm / 56.4 in
Seat Height: 830mm / 32.6 in
Ground Clearance: 165mm / 6.4 in
Dry Weight: 195 kg / 429 lbs
Wet Weight: 210 kg / 462 lbs
Fuel Capacity: 17 Litres / 3.1 US gal

The post Hyosung GT 650R (2013-14) appeared first on MotorcycleSpecifications.com.

PIaggio X8 400 (2007)

admin — Sun, 02 Apr 2023 05:49:11 +0000

The Piaggio X8 400, produced in 2007, is a four-stroke, single-cylinder, liquid-cooled motorcycle with a capacity of 399cc. It has a maximum power output of 25 kW at 7500 rpm and maximum torque of 37.6 Nm at 5500 rpm. The transmission is a CVT (continuously variable transmission) with twist and go technology, and the final drive is a belt. The motorcycle has automatic, centrifugal, dry clutch operation. The front suspension is a hydraulic telescopic fork, and the rear suspension is an adjustable dual shock system. The wheels are die-cast aluminum alloy with a front wheel size of 3.50 x 14 inches and a rear wheel size of 4.50 x 14 inches. The front brakes consist of double discs, and the rear brake is a single disc, with both using a two-piston setup. The motorcycle is 2184 mm in length, 760 mm in width, and has a wheelbase of 1540 mm. The dry weight is 198 kg with a fuel capacity of 12 L, including a reserve of 1.8 L. The average fuel consumption is 4.5 L/100 km, and the top speed is 155 km/h. Guy Allen from Motoring wrote a review of the Piaggio X8 400.

Technical specifications:

Make Model: Piaggio X8 400

Year: 2007
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 399 cc / 24.4 cub in.
Bore x Stroke: 85.8 mm x 69 mm
Cooling System: Liquid cooled
Lubrication System: Separate with automatic mixer
Fuel System: Injection
Ignition: Inductive
Starting: Electric
Max Power: 25 kW / 36 hp @ 7500 rpm
Max Torque: 37.6 Nm / 3.83 kgf-m / 27.7 ft-lbs @ 5500 rpm
Transmission: CVT, twist and go
Final Drive: Belt
Clutch: Automatic, centrifugal, dry
Front Suspension: Hydraulic telescopic fork, 35 mm
Rear Suspension: Dual, 4 position preload adjustable shocks
Front Brakes: Double disc, 240 mm, 2-piston per disc
Rear Brakes: Single disc, 240 mm , 2-piston
Wheels: Die cast aluminium alloy
Front Wheel: 3.50 x 14 in.
Front Wheel Travel: 94 mm / 3.7 in.
Rear Wheel: 4.50 x 14 in.
Rear Wheel Travel: 90 mm / 3.5 in.
Front Tyre: 120/70 – 14 in.
Rear Tyre: 130/70 – 12 in.
Frame: Double cradle, high strength tubular steel
Dimensions: Length: 2184 mm / 86.0 in Width: 760 mm / 29.9 in.
Wheelbase: 1540 mm / 60.6 in.
Seat Height: 790 mm / 31.1 in.
Dry Weight: 198 kg / 437 lbs
Fuel Capacity: 12 L / 3.2 US gal
Tank Reserve: 1.8 L / 0.48 Us gal
Consumption Average: 4.5 L/100 km / 22 km/l / 51.7 US mpg
Top Speed: 155 km/h / 96 mph
Review: Guy Allen, Motoring

The post PIaggio X8 400 (2007) appeared first on MotorcycleSpecifications.com.

Beta Alp 200 4T (2003-04)

admin — Sun, 02 Apr 2023 03:32:00 +0000

The Beta Alp 200 4T was a motorcycle produced from 2003-04. It had a four stroke, single cylinder engine with a capacity of 199cc and a compression ratio of 9.4:1. The bike was air-cooled and had forced lubrication with a pump. It had an electronic ignition and could be started with either an electric or kick start. The maximum power output was 11.2 kW or 15 hp at 7750 rpm. The transmission was a 5-speed and the final drive was chain. The front suspension featured hydraulic forks with 38mm front wheel travel, and the rear suspension was a single shock adjustable spring preload with 180mm wheel travel. The front brakes had a single 220 mm disc with a 2-piston caliper, while the rear brakes had a single 200 mm disc with a 1-piston caliper. The front wheel was a 2.75-21 and the rear wheel was a 4.00-18. The bike’s dimensions were 2150 mm in length, 830 mm in width, and 1170 mm in height, with a wheelbase of 1350 mm and a seat height of 830 mm. The ground clearance was 280 mm, and the dry weight was 103 kg. The fuel capacity was 6.8 L with a fuel reserve of 1.5 L.

Technical specifications:

Make Model: Beta Alp 200 4T

Year: 2003 – 04
Engine: Four stroke, single cylinder, SOHC, 2 valves per cylinder
Capacity: 199 cc / 12.1 cu in
Bore x Stroke: 66 x 58.2 mm
Compression Ratio: 9.4:1
Cooling System: Air cooled
Lubrication System: Forced, with pump
Induction: Mikuni BST 31 42AD
Ignition: Electronic
Starting: Electric & kick
Max Power: 11.2 kW / 15 hp @ 7750 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic forks, 38mm
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 180 mm / 7.1 in
Front Brakes: Single 220 mm disc, 2-piston caliper
Rear Brakes: Single 200 mm disc, 1-piston caliper
Front Wheel: 2.75 -21
Rear Wheel: 4.00 -18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2150 mm / 84.6 in Width: 830 mm / 32.3 in Height: 1170 mm / 46.1 in
Wheelbase: 1350 mm / 53.1 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 280 mm / 11 in
Dry Weight: 103 kg / 227 lbs
Fuel Capacity: 6.8 L / 1.8 US gal
Fuel Reserve: 1.5 L / 0.40 US gal

The post Beta Alp 200 4T (2003-04) appeared first on MotorcycleSpecifications.com.

Vespa GTS 150 i-get (2017)

admin — Sat, 01 Apr 2023 09:35:04 +0000

The Vespa GTS 150 i-get is a 2017 motorcycle equipped with a four stroke, single cylinder engine that has a capacity of 155.2 cc / 9.5 cu in. The engine has a bore x stroke of 58 x 58.7 mm and is cooled by a liquid cooling system. The motorcycle is also equipped with an electronic fuel injection induction system and electronic variable advance ignition. The GTS 150 has a maximum power of 11 kW / 15 hp @ 8250 rpm and a maximum torque of 14 Nm / 1.43 kgf-m / 10.3 ft-lb @ 6500 rpm. It has a twist and go CVT with torque server transmission and a final drive of a belt. Its frame is made of pressed steel sheet metal with welded reinforcements. The front suspension is a single arm suspension with coil spring and hydraulic shock absorber while the rear is made of double hydraulic shock absorbers with adjustable preload with 4 settings. The front and rear brakes are both single 220 mm stainless steel discs and the motorcycle has tubeless tyres at the front and rear with dimensions of 120/70-12 and 130/70-12 respectively. The motorcycle has a length of 1930 mm / 76.0 in, a width of 755 mm / 29.7 in, a wheelbase of 1370 mm / 53.9 in, and a seat height of 790 mm / 31.1 in. It has a fuel capacity of 7 litres / 1.8 US gal / 1.5 Imp gal. The Vespa GTS 150 i-get is a modern and stylish option for riders looking for a reliable and efficient motorcycle.

Technical specifications:

Make Model: Vespa GTS 150 i-get

Year: 2017 –
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 155.2 cc / 9.5 cu in
Bore x Stroke: 58 x 58.7 mm
Cooling System: Liquid cooling
Lubrication System: Wet sump
Emissions Compliance: Euro 4
Induction: Electronic fuel injection
Ignition: Electronic variable advance
Starting: Electric
Max Power: 11 kW / 15 hp @ 8250 rpm
Max Torque: 14 Nm / 1.43 kgf-m / 10.3 ft-lb @ 6500 rpm
Clutch: Automatic centrifugal dry clutch
Transmission: Twist and go CVT with torque server
Final Drive: Belt
Frame: Pressed steel sheetmetal with welded reinforcements
Front Suspension: Single arm suspension with coil spring and hydraulic shock absorber
Rear Suspension: Double hydraulic shock absorbers with adjustable preload with 4 settings
Front Brakes: Single 220 mm stainless steel disc, Hydraulically operated
Rear Brakes: Single 220 mm stainless steel disc, Hydraulically operated
Front Tyre: 120/70-12, Tubeless
Rear Tyre: 130/70-12, Tubeless
Dimensions: Length 1930 mm / 76.0 in Width 755 mm / 29.7 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 790 mm / 31.1 in
Fuel Capacity: 7 Litres / 1.8 US gal / 1.5 Imp gal

The post Vespa GTS 150 i-get (2017) appeared first on MotorcycleSpecifications.com.

Victory Vision (2011-12)

admin — Sat, 01 Apr 2023 04:55:05 +0000

The Victory Vision Tour motorcycle was produced from 2011-12 and features a four-stroke, 50 degrees V twin engine with a capacity of 1731cc/106 cubic inches. It has electronic fuel injection, a wet multi-plate clutch, and a carbon fiber reinforced belt for final drive. The bike has a maximum torque of 146 Nm/14.9 kgf-m/108 ft-lb and a top speed estimated at 200 km/h or 124 mph. The bike has a solid black, sunset red with black pinstripe, or gold mist color option. The fuel capacity is 22.7 L/6 US gal and has a fuel consumption average of 5.4 L/100 km or 18.5 km/l or 43.6 US mpg. The front brakes are 2 x 300 mm floating rotor 4 piston caliper, with ABS, while the rear brakes have a single 300 mm floating rotor and 2 piston caliper, also with ABS. The front wheel is 3.5 x 18 in., while the rear is 5.0 x 16 in. The rear suspension is a single, mono-tube gas forged and cast aluminum with constant-rate linkage, air adjustable, while the front suspension is a 43 mm inverted cartridge telescopic fork. The bike weighs 394 kg/869 lbs dry and has a seating height of 673 mm/26.5 in.

Technical specifications:

Make Model: Victory Vision Tour

Year: 2011 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc /106 cub in.
Bore x Stroke: 101 x 108 mm
Compression Ratio: 9.4:1
Cooling System: Air cooled / oil
Fuel System: Electronic Fuel Injection with dual 45mm throttle bodies
Starting: Electric
Battery: 12V, 18 Ah
Clutch: Wet, multi-plate
Exhaust: Split, dual exhaust with crossover
Max Torque: 146 Nm / 14.9 kgf-m / 108 ft-lb
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Rake: 29 degrees
Trail: 137 mm / 5.4 in.
Dimensions: Length: 2702 mm / 106.4 in.
Wheelbase: 1670 mm / 65.7 in.
Ground Clearance: 148 mm / 5.8 in.
Seat Height: 673 mm / 26.5 in
Front Suspension: 43 mm Inverted cartridge telescopic fork
Front Wheel travel: 130 mm / 5.1 in.
Rear Suspension: Single, mono-tube gas forged and cast aluminum with constant-rate linkage, air adjustable
Rear Wheel Travel: 120 mm / 4.7 in.
Front Brakes: 2 x 300 mm floating rotor 4 piston caliper, ABS
Rear Brakes: Single 300 mm floating rotor 2 piston caliper, ABS
Front Wheel: 3.5 x 18 in.
Front Tyre: 130/70 R18, Dunlop Elite 3
Rear Wheel: 5.0 x 16 in.
Rear Tyre: 180/60 R16, Dunlop Elite 3
GVWR: 643 kg / 1414 lbs
Dry-Weight: 394 kg / 869 lbs
Fuel Capacity: 22.7 L / 6 US gal
Oil Capacity: 4.73 L / 5.0 US Quarts
Consumption Average: 5.4 L/100 km / 18.5 km/l / 43.6 US mpg
Top Speed (est.): 200 km/h / 124 mph
Colours: Solid black, Sunset red with black pinstripe, Gold mist
Review:

The post Victory Vision (2011-12) appeared first on MotorcycleSpecifications.com.

Honda CN 250 (1986-09)

admin — Fri, 31 Mar 2023 07:51:56 +0000

The Honda CN 250 Helix / Fusion was produced from 1986 to 2009. It is powered by a four-stroke, single cylinder, SOHC engine with a capacity of 244 cc. The bike features liquid cooling, V-Matic continuously variable transmission, and a front trailing link fork suspension with a swingarm rear suspension. Its braking system is comprised of a single disc in the front and a drum in the rear. The bike has a wheelbase of 1625 mm (64.0 in) and a seat height of 665 mm / 26.2 in. It weighs 157 kg / 345 lbs and has a fuel capacity of 12 Litres / 3.2 US gal. The maximum power output of the Honda CN 250 Helix / Fusion is 17 hp / 12.4 kW while the maximum torque produced is 20.5 Nm / 15.1 ft-lb.

Technical specifications:

Make Model: Honda CN 250 Helix / Fusion

Year: 1986 – 09
Engine: Four stroke, single cylinder. SOHC
Capacity: 244 cc / 14.9 cu-in
Bore x Stroke:
Cooling System: Liquid cooled
Compression Ratio:
Induction:
Ignition:
Starting:
Max Power: 17 hp / 12.4 kW
Max Torque: 20.5 Nm / 15.1 ft-lb
Transmission: V-Matic continuously variable transmission
Final Drive:
Front Suspension: Trailing link fork
Rear Suspension: Swingarm
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 110/100-12
Rear Tyre: 120/90-10
Wheelbase: 1625 mm (64.0 in)
Seat height: 665 mm / 26.2 in
Dry Weight: 157 kg / 345 lbs
Fuel Capacity: 12 Litres / 3.2 US gal

The post Honda CN 250 (1986-09) appeared first on MotorcycleSpecifications.com.

Vespa GTV 250 (2007)

admin — Fri, 31 Mar 2023 03:56:00 +0000

The Vespa GTV 250 (2007) is a classic styled motorcycle with a liquid-cooled four-stroke single cylinder, SOHC, 4 valve engine that has a capacity of 244 cc. It has a maximum power of 16.2 kW / 22 hp @ 8250 rpm and a max torque of 20.2 Nm / 2.06 kgf-m / 14.9 ft/lb @ 6500 rpm. The transmission is CVT automatic, twist and go with a belt final drive. The frame is made of pressed sheet steel with a streamlined monocoque structure. The suspension includes a single arm with dual-acting hydraulic shock and co-axial spring in the front and two double-action shock absorbers with adjustable pre-load in the rear. The brakes are single 220 mm stainless steel discs on both the front and rear wheels. It has cast alloy wheels with a front tyre size of 120/70-12 and a rear size of 130/70-12. The dimensions of the motorcycle include a length of 1930 mm / 76.0 in, a width of 755 mm / 29.7 in, and a wheelbase of 1395 mm / 54.9 in. Its dry weight is 138 kg / 304 lbs and its wet weight is 151 kg / 333 lbs. The fuel capacity is 9.2 Litres / 2.4 US gal with a reserve of 2.0 L / 0.53 US gal. It has an average fuel consumption of 2.6 L/100 km / 39 km/l / 92 US mpg and a top speed of 122 km/h / 76 mph.

Technical specifications:

Make Model: Vespa GTV 250

Year: 2007 –
Engine: Four stroke single cylinder, SOHC, 4 valve
Capacity: 244 cc / 14.9 cub in
Bore x Stroke: 72 x 60 mm
Cooling: Liquid cooled
Lubrication: Wet sump
Ignition: Electronic
Starting: Electric
Clutch: Wet, multiplate
Max Power: 16.2 kW / 22 hp @ 8250 rpm
Max Torque: 20.2 Nm / 2.06 kgf-m / 14.9 ft/lb @ 6500 rpm
Transmission: CVT, twist and go
Final Drive: Belt
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Single arm with dual acting hydraulic shock and co-axial sping
Rear Suspension: 2 x double action shock absorbers with adjustable pre-load
Front Brakes: Single 220 mm stainless steel disc
Rear Brakes: Single 220 mm stainless steel disc
Wheels: Cast alloy
Front Tyre: 120/70-12
Rear Tyre: 130/70-12
Dimensions: Length 1930 mm / 76.0 in Width 755 mm / 29.7 in
Wheelbase: 1395 mm / 54.9 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 138 kg / 304 lbs
Wet Weight: 151 kg / 333 lbs
Fuel Capacity: 9.2 Litres / 2.4 US gal
Reserve: 2.0 L / 0.53 US gal
Consumption Average: 2.6 L/100 km / 39 km/l / 92 US mpg
Top Speed: 122 km/h / 76 mph

The post Vespa GTV 250 (2007) appeared first on MotorcycleSpecifications.com.

Honda CBR125 (2014-15)

admin — Thu, 30 Mar 2023 08:08:08 +0000

The Honda CBR125R was produced from 2014-15 and is a four-stroke, single-cylinder motorcycle, powered by a 124.7cc engine. It is liquid-cooled with a compression ratio of 11.0:1 and lubricated by wet sump. The ignition system uses Capacitor Discharge (CDI) with a spark plug made by NGK, CR8E. It starts with an electric and has a maximum power of 13.6 horsepower at 10,000 RPM and a maximum torque of 10.6 Nm at 8,250 RPM. The gearbox has six speeds with a final drive chain. The frame is made of steel and a double cradle with a 31mm telescopic fork and monoshock damper as front and rear suspensions respectively. Both front and rear brakes are single-disc, with the front brake having a 2-piston caliper and the rear having a 1-piston caliper. The dimensions of the bike are 1945mm length, 793mm width, 1313mm wheelbase, 793mm seat height, and a ground clearance of 185mm. The wet weight is 136kg with a fuel capacity of 13 liters. The average consumption for the bike is 31.1 km/l, and it can achieve a top speed of 110.2 km/h with a standing 1/4 mile of 20.3 seconds.

Technical specifications:

Make Model: Honda CBR 125R

Year: 2014 – 15
Engine: Four stroke single cylinder, SOHC, 2 valve.
Capacity: 124.7 cc / 7.6 cu-in
Bore x Stroke: 58 x 47.2 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/30
Induction: 28mm VK-type carb
Ignition: Capacitor Discharge (CDI)
Spark Plug: NGK, CR8E
Starting: Electric
Max Power: 13.6 hp / 10 kW @ 10000 rpm
Max Torque: 10.6 Nm / 1.08 kg-m @ 8250 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel, Double cradle frame
Front Suspension: 31mm telescopic fork,
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock damper,
Rear Wheel Travel: 126 mm / 4.9 in
Front Brakes: Single 276mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 80/80 17
Rear Tyre: 100/80 17
Rake: 35 degrees
Trail: 90 mm / 3.5 in
Dimensions: Length 1945 mm / 76.5 in Width 793 mm / 31.2 in
Wheelbase: 1313 mm / 51.6 in
Seat Height: 793 mm / 31.3 in
Ground Clearance: 185 mm / 7.2 in
Wet Weight: 136 kg / 299.8 lbs
Fuel Capacity: 13 Litres / 3.4 gal
Consumption Average: 31.1 km/it
Standing 1/4 Mile: 20.3 sec
Top Speed: 110.2 km/h

The post Honda CBR125 (2014-15) appeared first on MotorcycleSpecifications.com.

Beta RE125 4T (2008)

admin — Thu, 30 Mar 2023 01:18:15 +0000

The Beta RE125 4T motorcycle was manufactured in 2008 and is equipped with an air-cooled, four-stroke single-cylinder engine with a capacity of 123cc. The engine is lubricated with forced oil and cooled with air. It features a Mikuni 5NH1 carburetor for induction and a Moryama 5HH ignition system with an R NGK CR7 HSA spark plug. The bike has both electric and kick starting options, a wet multiplate clutch, and a 5-speed transmission with a chain final drive. It has a steel double-cradle frame and hydraulic forks for its front suspension with a 41mm wheel travel. Its rear suspension is supported by a single shock and is adjustable for spring preload with 220mm of wheel travel. The bike has a stopping power from a single 260 mm disc in front and a single 220 mm disc on the rear wheel. It has a front wheel size of 1.6 x 21 inches and a rear wheel size of 1.85 x 18 inches, with a front tire size of 90/90-21 and a rear tire size of 120/80-18. The bike has a length of 2070 mm, a width of 820 mm, and a height of 1200 mm with a ground clearance of 292 mm and a seat height of 890 mm. The bike weighs 102 kg dry and 110 kg wet, including a fuel capacity of 6.7 liters with a 1-liter reserve. The bike has a top speed of 95.2 km/h (59 mph) and comes in three colors: red, white, and black.

Technical specifications:

Make Model: Beta RE 125 AT

Year: 2008
Engine: Air cooled, four stroke, single cylinder,
Capacity: 123 cc / 7.5 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Lubrication: Forced, with pump
Engine Oil: SAE 15W/50
Cooling System: Air cooled
Induction: Mikuni 5NH1 carburetor
Ignition: Moryama 5HH
Spark Plub: R NGK CR7 HSA
Starting: Electric & kick
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, double cradle
Front Suspension: Hydraulic forks, 41mm
Front Wheel Travel: 245 mm / 9.6 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Wheel: 1.6 x 21
Rear Wheel: 1.85 x 18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2070 mm / 81.5 in Width: 820 mm / 32.3 in Height: 1200 mm / 47.2 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 292 mm / 11.5 in
Seat Height: 890 mm / 35.0 in
Dry Weight: 102 kg / 225 lbs
Wet Weight: 110 kg / 243 lbs
Fuel Capacity: 6.7 L / 1.8 US gal
Fuel Reserve: 1.0 L / 0.3 US gal
Standing 1/4 Mile: 12.7 sec
Top Speed: 95.2 km/h / 59 mph
Colours: Red, White, Black

The post Beta RE125 4T (2008) appeared first on MotorcycleSpecifications.com.

Derbi Senda SM 125 4T (1999-03)

admin — Wed, 29 Mar 2023 19:54:58 +0000

The Derbi Senda SM 125 4T, produced between 1999 and 2003, is a motorcycle powered by a four-stroke, single-cylinder OHC engine with a capacity of 124cc. It has a compression ratio of 11.0:1, electronic ignition, and a 22mm Keihin induction system. The bike’s maximum power output is 9 kW or 12 hp at 6500 rpm, and the maximum torque is 9 Nm or 6.6 lb-ft at 6500 rpm. The Senda SM 125 4T has a multiplate clutch and a five-speed transmission with a chain final drive. Paoli forks with a diameter of 41mm are used for the front suspension, providing 195mm or 7.6 inches of travel, while a Paoli monoshock is used for the rear suspension, offering 170mm or 6.7 inches of travel. The front and rear brakes are equipped with single 300mm and 220mm discs, respectively. The bike’s front and rear tires are 110/80-17 and 130/70-17, respectively, with a seat height of 830mm or 32.7 inches. The motorcycle has a dry weight of 116 kg or 255.7 lbs and can carry 7.5 liters or 2.0 US gallons of fuel.

Technical specifications:

Make Model: Derbi Senda SM 125 4T

Year: 1999-03
Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Paoli forks
Front Wheel Travel: 195 mm / 7.6 in
Rear Suspension: Paoli monoshock
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: Single 300mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 110/80 -17
Rear Tyre: 130/70 -17
Seat Height: 830 mm / 32.7 in
Dry Weight: 116 kg / 255.7 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal

The post Derbi Senda SM 125 4T (1999-03) appeared first on MotorcycleSpecifications.com.

Hyosung GT 650R (2011-12)

admin — Wed, 29 Mar 2023 06:59:59 +0000

The Hyosung GT 650R FI is a 2011-12 motorcycle model with a 647cc, four-stroke V twin engine with a compression ratio of 11.4:1. It has fuel injection and an immobilizer as well as a digital CDI ignition system that can produce a maximum power output of 80.2 hp @ 9000 rpm and 68 Nm torque @ 7500 rpm. Its clutch is cable-operated and has wet, multiple discs, and six-speed transmission with a chain final drive. This motorcycle has a steel, double-pipe frame with a front fork suspension with 41mm oil upside-down forks and a rear swinging arm suspension with 100mm travel. The front and rear brakes are 2x 300mm discs and a single 230mm disc, respectively. Its front and rear tires are 120/60 -17 and 160/60 -17, respectively, its dimensions are: length 2060 mm, width 740 mm, height 1125 mm, and wheelbase 1435 mm. It has a dry weight of 195 kg, a wet weight of 210 kg and a fuel capacity of 17L/3.1 US gal. It can achieve a standing ¼ mile in 13.0 seconds and a top speed of 203.8 km/h.

Technical specifications:

Make Model: Hyosung GT 650R FI

Year: 2011 – 12
Engine: Four stroke, 90 degrees V twin, DOHC, 4 valve per cylinder
Capacity: 647 cc / 39.4 cu-in
Bore x Stroke: 81.5 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.4:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/40
Induction: Fuel Injection (include immobilizer)
Ignition: Digital CDI
Spark Plug: NGK, CR8E
Starting: Electric
Max Power: 80.2 hp / 59 kW @ 9000 rpm
Max Torque: 68 Nm / 6.93 kg-m @ 7500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel, double pipe
Front Suspension: 41mm Oil upside down forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swinging arm
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm discs
Rear Brakes: Single 230mm disc
Front Tyre: 120/60 -17
Rear Tyre: 160/60 -17
Dimensions: Length 2060 mm / 81.1 in Width 740 mm / 29.1 in Height 1125 mm / 44.2 in
Wheelbase: 1435 mm / 56.4 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 195 kg / 429 lbs
Wet Weight: 210 kg / 462 lbs
Fuel Capacity: 17 Litres / 3.1 US gal
Standing 1/4 Mile: 13.0 sec
Top Speed: 203.8 km/h

The post Hyosung GT 650R (2011-12) appeared first on MotorcycleSpecifications.com.

Honda XR 600R (1995)

admin — Mon, 27 Mar 2023 12:22:03 +0000

The Honda XR 600R is a single cylinder, four stroke motorcycle that was produced in 1995. It has a 591cc engine capacity and a compression ratio of 9.0:1. The bike is air-cooled and has a solid-state CDI ignition. The kick-start bike has a maximum power of 46 hp at 6000 rpm and a max torque of 51.9 Nm at 5500 rpm. It has a five-speed transmission with a final drive of #520 O-ring-sealed chain. The front suspension has an air-adjustable leading-axle Showa cartridge fork with eight-position compression damping adjustability, and the rear suspension has a Pro-Link single Showa shock with spring preload, 20-position compression and 20-position rebound damping adjustability. The bike has a single 256mm disc with 2 piston caliper front brake and a single disc with 1 piston caliper rear brake. It has a wheelbase of 1455.4mm and a seat height of 955.0mm. The dry weight is 134kg and the wet weight is 146kg. The fuel capacity is 10.5 litres and it has a top speed of 143.2km/h.

Technical specifications:

Make Model: Honda XR 600R

Year: 1995
Engine: Four stroke, single cylinder, SOHC, 4 valve RFVC
Capacity: 591 cc / 36.0 cu-in
Bore x Stroke: 97 x 80 mm
Compression Ratio: 9.0:1
Cooling System: Air cooled
Induction: 39 mm PD type
Ignition: Solid-state CDI
Starting: Kick
Max Power: 46 hp / 33.5 kW @ 6000 rpm
Max Torque: 51.9 Nm / 38.2 ft-lb @ 5500 rpm
Transmission: 5 Speed
Final Drive: #520 O-ring-sealed chain: 14T/48T
Front Suspension: 43 mm air-adjustable leading-axle Showa cartridge fork with eight-position compression damping adjustability
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Pro-Link single Showa shock with spring preload, 20-position compression and 20-position rebound damping adjustability
Rear Wheel Travel: 280 mm / 11.0 in
Front Brakes: Single 256 mm disc 2 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 80/100-21
Rear Tyre: 110/100-18
Wheelbase: 1455.4 mm / 57.3 in
Seat Height: 955.0 mm / 37.6 in
Ground Clearance: 345.5 mm / 13.6 in
Dry Weight: 134 kg / 295.5 lbs
Wet Weight: 146 kg / 321.9 lbs
Fuel Capacity: 10.5 Litres / 2.6 US gal
Standing 1/4 Mile: 14.6 sec / 134.5 km/h
Top Speed: 143.2 km/h

The post Honda XR 600R (1995) appeared first on MotorcycleSpecifications.com.

Gilera Nexus 250 (2006-08)

admin — Sun, 26 Mar 2023 14:33:18 +0000

The Gilera Nexus 250 is a motorcycle model made between 2006-08. It has a liquid-cooled, four-stroke, single-cylinder engine with a capacity of 249cc/12.2 cu-in. The compression ratio is 11.5:1, lubrication is wet sump, and it runs on RON 95 unleaded petrol. The bike can produce a maximum power output of 22.1 hp / 16.1 kW @ 8050 rpm and a maximum torque of 20.2 Nm / 14.9 lb-ft @ 6500 rpm. It has a twist-and-go CVT transmission/drive system, and a double-cradle trellis frame made of high-strength steel tubes. The front suspension is a telescopic hydraulic fork, and the rear suspension is a double hydraulic shock absorber with a four-position spring preload. The front and rear brakes are single-disc, with the front being 260mm and the rear being 240mm. The bike has a wheelbase of 1530mm/60.2in, a seat height of 810mm/31.9in, and a dry weight of 174kg/383.6lbs. The fuel capacity is 15 litres/3.9 US gal, and the bike has a front tyre size of 120/70-14 and a rear tyre size of 140/60-14.

Technical specifications:

Make Model: Gilera Nexus 250

Year: 2006 – 08
Engine: Four stroke, single cylinder, SOHC,4 valves
Capacity: 249 cc / 12.2 cu-in
Bore x Stroke: 72 X 60 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: RON 95 unleaded petrol
Ignition: Electronic CDI
Starting: Electric
Max Power: 22,1 hp / 16.1 kW @ 8050 rpm
Max Torque: 20.2 Nm / 14.9 lb-ft @ 6500 rpm
Transmission / Drive: Twist-and-go CVT
Frame: Double cradle trellis made of high-strength steel tubes
Front Suspension: Telescopic hydraulic fork with f 35 mm shafts; 94 mm wheel travel
Rear Suspension: Double hydraulic shock absorber with four-position spring preload; 76 mm wheel travel
Front Brakes: Single 260mm disc
Rear Brakes: Single 240 disc
Front Tyre: 120/70-14
Rear Tyre: 140/60-14
Wheelbase: 1530 mm / 60.2 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 174.0 kg / 383.6 lbs
Wet Weight: 186.0 kg / 410.1 lbs
Fuel Capacity: 15 Litres / 3.9 US gal

The post Gilera Nexus 250 (2006-08) appeared first on MotorcycleSpecifications.com.

Honda CB125 (1982)

admin — Sun, 26 Mar 2023 04:30:59 +0000

The Honda CB125 Disc, manufactured in 1982, is a four-stroke, twin-cylinder motorcycle with an engine capacity of 124cc/7.6 cu-in. It has a bore x stroke of 44 x 41mm and a compression ratio of 7.4:1. The bike is equipped with 2x Keihin 22mm slide type manual choke induction and CDI ignition, and its maximum power is 17 hp / 12.4 kW at 11500 rpm. The clutch is multi-disc, wet, and the transmission has 5 speeds. Its final drive is a chain gear ratio of 5th 9.46 / 4th 11.10 / 3rd 13.72 / 2nd 17.81 / 1st 26.20. The front suspension is a telescopic fork with a 4.5 inch wheel travel and the rear suspension is a swing arm with a 2.6 inch wheel travel. The tires are 2.50 -18 in the front and 2.75 -18 in the rear. Its dry-weight is 133kg/295.4 lbs and it has a fuel capacity of 10 Litres/10.6 US gal.

Technical specifications:

Make Model: Honda CB 125 Disc

Year: 1982
Engine: Four stroke, twin cylinder, OHC, 2 valve per cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 44 x 41mm
Cooling System: Air cooled
Compression Ratio: 7.4:1
Induction: 2x Keihin 22mm slide type manual choke
Ignition: CDI
Starting: Kick
Max Power: 17 hp / 12.4 kW @ 11500 rpm
Max Torque: NA
Clutch: Multi-disc, wet
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 5th 9.46 / 4th 11.10 / 3rd 13.72 / 2nd 17.81 / 1st 26.20
Front Suspension: Telescopic fork, 4.5 in wheel travel.
Swing arm, 2.6 in wheel travel.Front Tyre: 2.50 -18
Rear Tyre: 2.75 -18
Dry-Weight: 133 kg / 295.4 lbs
Fuel Capacity: 10 Litres / 10.6 US gal

The post Honda CB125 (1982) appeared first on MotorcycleSpecifications.com.

PIaggio X8 250 (2006-07)

admin — Sat, 25 Mar 2023 21:13:22 +0000

The Piaggio X8 250 motorcycle was produced from 2006-07 and is equipped with a four-stroke, single cylinder, SOHC, 4 valve engine with a capacity of 244.3 cc. The bike has a liquid cooling system, separate lubrication, fuel injection, and inductive ignition. The motorcycle is electrically started and has a maximum power output of 16.2 kW at 8250 rpm and a maximum torque of 20.2 Nm at 6500 rpm. It has a CVT transmission, belt drive, and automatic, centrifugal, dry clutch. The front suspension features a hydraulic telescopic fork, while the rear suspension has dual, preload-adjustable shocks. The brakes are single disc with 2-piston calipers, with a 260mm disc up front and a 240mm disc in the rear. The bike is fitted with alloy rims and spokes, with a 3.50 x 14 in. front wheel and a 3.00 x 12 in. rear wheel. The front and rear tires are 120/70-14 and 130/70-12, respectively. The bike has a double cradle, high-strength tubular steel frame and dimensions of 2070 mm in length, 760 mm in width, and a wheelbase of 1490 mm. The seat height is 785 mm, and the dry weight is 171 kg. The fuel tank has a capacity of 12L and a reserve of 1.8L, with fuel consumption averaging at 3.4 L/100 km. The bike has a top speed of 126 km/h, and it comes in black, light grey, dark grey, and blue.

Technical specifications:

Make Model: Piaggio X8 250

Year: 2006 – 07
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 244.3 cc / 14.9 cub in.
Bore x Stroke: 72 mm x 60 mm
Cooling System: Liquid cooled
Lubrication System: Separate with automatic mixer
Fuel System: Injection
Ignition: Inductive
Starting: Electric
Max Power: 16.2 kW / 22 hp @ 8250 rpm
Max Torque: 20.2 Nm / 2.06 kgf-m / 14.9 ft-lbs @ 6500 rpm
Transmission: CVT, twist and go
Final Drive: Belt
Clutch: Automatic, centrifugal, dry
Front Suspension: Hydraulic telescopic fork, 35 mm
Rear Suspension: Dual, preload adjustable shocks
Front Brakes: Single disc, 260 mm, 2-piston
Rear Brakes: Single disc, 240 mm , 2-piston
Wheels: Alloy rims and spokes
Front Wheel: 3.50 x 14 in.
Rear Wheel: 3.00 x 12 in.
Front Tyre: 120/70 – 14 in.
Rear Tyre: 130/70 – 12 in.
Frame: Double cradle, high strength tubular steel
Dimensions: Length: 2070 mm / 81.5 in Width: 760 mm / 29.9 in.
Wheelbase: 1490 mm / 58.7 in.
Seat Height: 785 mm / 30.9 in.
Dry Weight: 171 kg / 377 lbs
Fuel Capacity: 12 L / 3.2 US gal
Tank Reserve: 1.8 L / 0.48 Us gal
Consumption Average: 3.4 L/100 km / 29 km/l / 68 US mpg
Top Speed: 126 km/h / 78 mph
Colours: Black, Light grey, dark grey and blue
Review: Insure My Ride

The post PIaggio X8 250 (2006-07) appeared first on MotorcycleSpecifications.com.

Vespa Sprint 125 IGET ABS (2017)

admin — Sat, 25 Mar 2023 16:36:11 +0000

The Vespa Sprint 125 IGET ABS (2017) is a four stroke, single cylinder motorcycle with a 124.5cc capacity and a compression ratio of 10.5:1. It has a fuel injection system and a Catalytic converter to regulate exhaust emissions. The motorcycle has an automatic, dry centrifugal clutch system with CVT transmission and a belt final drive. It is equipped with a sheet metal body with reinforced welds, a hydraulic monoshock rear suspension, and a front single arm with coil spring dual action mono shock absorber. The front brake is a single stainless steel disc while the rear brake is a drum that is mechanically operated. The wheels are die-cast aluminum alloy with a front and rear rim size of 2.50 x 12 and 3.00 x 12 respectively. The front and rear tire sizes are 110/70-12 and 20/70-12. The Vespa Sprint 125 IGET ABS has a length of 1860 mm and a width of 735 mm with a 1340 mm wheelbase. The motorcycle has a seat height of 780 mm and weighs 115 kg with a fuel capacity of 8 litres. Its average consumption is 3.1L/100 km, and it has a top speed of 64 km/h.

Technical specifications:

Make Model: Vespa Sprint 125 IGET ABS

Year: 2017
Engine: Four stroke, single cylinder, SOHC, 3 valve
Capacity: 124.5 cc / 7.6 cub in
Bore x Stroke: 52 x 58.6 mm mm
Cooling System: Air cooled, forced
Compression Ratio: 10.5:1
Fuel system: Fuel injection
Exhaust: Catalytic converter
Ignition: Electronic
Starting: Electric
Max Power: 7.8 kW / 10.6 hp @ 7700 rpm
Max Torque: 10.4 Nm / 1.06 kgf-m / 7.7 ft-lbs @ 6500 rpm
Clutch: Automatic, dry centrifugal with vibration dampers
Transmission: CVT
Final Drive: Belt
Frame: Sheet metal body with welded reinforcements
Front Suspension: Single arm with coil spring and dual action mono shock absorber
Front Wheel Travel: 78 mm / 3.1 in.
Rear Suspension: Hydraulic monoshock
Rear Wheel Travel: 70 mm / 2.8 in.
Front Brakes: Single Stainless steel 200mm disc, hydraulically operated
Rear Brakes: Drum, 140 mm, mechanically operated
Wheels: Die-cast aluminium alloy
Front Rim: 2.50 x 12
Rear Rim: 3.00 x 12
Front Tyre: 110/70-12
Rear Tyre: 20/70-12
Dimensions: Length 1860 mm / 73.2 in Width 735 mm / 28.9 in
Wheelbase: 1340 mm / 52.7 in.
Seat Height: 780 mm / 30.7 in.
Dry Weight: 115 kg / 254 lbs
Fuel Capacity: 8 Litres / 2.1 US gal
Average Consumption: 3.1 L/100 km / 32 km/l / 75 US mpg
Top Speed: 64 km/h / 40 mph

The post Vespa Sprint 125 IGET ABS (2017) appeared first on MotorcycleSpecifications.com.

Hyosung GV 650 Aquila (2008)

admin — Sat, 25 Mar 2023 15:16:17 +0000

The Hyosung GV 650 Aquila was released for its 30th anniversary in 2008. It features a four-stroke, 647cc V twin engine with liquid cooling and DOHC. The engine has a compression ratio of 11.4:1 and is lubricated by wet sump using a semi-synthetic 10W/40 oil. The bike is started electrically and has a maximum power output of 72.1 horsepower and 61.2 Nm of torque. The transmission is a 6-speed and the final drive is a belt. The frame is made of steel and has double pipes. The front suspension has 41mm upside-down forks and the rear suspension features dual shocks. The GV 650 Aquila has front dual-disc brakes and a single rear disc brake. It has a fuel capacity of 15 litres and an average consumption of 21.6 km/l. The bike has a top speed of 190.6 km/h and can complete a standing 1/4 mile in 13.6 seconds. The dimensions of the bike are 2040mm in length, 840mm in width, and 1155mm in height. It has a wheelbase of 1665mm, a ground clearance of 160mm and a seat height of 675mm. The dry weight of the GV 650 Aquila is 218kg.

Technical specifications:

Make Model: Hyosung GV 650 Aquila 30th Anniversery

Year: 2008
Engine: Four stroke, 90 degrees V twin, DOHC, 4 valve per cylinder.
Capacity: 647 cc / 39.4 cu-in
Bore x Stroke: 81.5 x 62 mm
Cooling: Liquid cooled
Compression Ratio: 11.4:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/40
Induction: 2x 38 mm Carburettor
Ignition: Digital CDI
Spark Plug: NGK, CR8E
Starting: Electric
Max Power: 72.1 hp / 52.4 kW @ 9000 rpm
Max Torque: 61.2 Nm / 6.28 kgf-m @ 7500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Belt
Frame: Steel, double pipe
Front Suspension: 41mm upside down forks.
Rear Suspension: Dual shocks
Front Brakes: 2x 300mm discs
Rear Brakes: Single 230mm disc
Front Tyre: 110/70-17 54H
Rear Tyre: 180/55-17 69H
Dimensions: Length 2040 mm / 80.3 in Width 840 mm / 33 in Height 1155 mm / 45.2 in
Wheelbase: 1665 mm / 65.5 in
Ground Clearance: 160 mm / 6.2 in
Seat Height: 675 mm / 26.5 in
Dry Weight: 218 kg / 480 lbs
Fuel Capacity: 15 Litres
Consumption Average: 21.6 km/lit
Standing 1/4 Mile: 13.6 sec
Top Speed: 190.6 km/h

The post Hyosung GV 650 Aquila (2008) appeared first on MotorcycleSpecifications.com.

Honda CB750K (1978-79)

admin — Sat, 25 Mar 2023 15:04:18 +0000

The Honda CB750K model was produced between 1978 and 1979. It had a four-stroke, transverse four-cylinder engine with 748cc capacity and a compression ratio of 9.2:1. The motorcycle was air-cooled and had 4 x 30mm Keihin carb induction, and electronic ignition. The maximum power produced was 57 kW / 77 hp at 9000 rpm and a torque of 65 Nm / 6.6 kgf-m / 48 ft-lb at 7000 rpm. The transmission was six-speed with a chain final drive. It had telescopic forks on the front suspension and dual shocks, swinging arm on the rear suspension. Both front and rear brakes differed, front brakes employed a single 275mm disc and rear brakes used a 180mm drum. The front tyre was a 3.25-19 and the rear tyre was a 4.00-18. It had a seat height of 798 mm / 31.4 in. and a dry weight of 236 kg / 520lb. It had a fuel capacity of 20 L / 5.3 US gal and a reserve of 4.9 L / 1.3 US gal, with a fuel consumption of 6.0 L/100km / 16.6 km/l / 39 US mpg. Its oil capacity was 4.4 L / 4.7 US quarts. Standing 1/4 mile was completed in 12.4 seconds and its top speed was 200 km/h / 125 mph.

Technical specifications:

Make Model: Honda CB 750 KZ

Year: 1978 – 79
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder
Capacity: 748 cc / 45.6 cub in.
Bore x Stroke: 62 62 mm
Compression Ratio: 9.2:1
Cooling System: Air cooled
Induction: 4 x 30 mm Keihin carb
Ignition: Electronic
Starting: Electric
Max Power: 57 kW / 77 hp @ 9000 rpm
Max Torque: 65 Nm / 6.6 kgf-m / 48 ft-lb @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Front Wheel Travel: 160 mm / 6.3 in.
Rear Suspension: Dual shocks, swinging arm
Rear Wheel Travel: 101.5 mm / 4.0 in.
Front Brakes: Single 275 mm disc
Rear Brakes: 180 mm drum
Front Tyre: 3.25-19
Rear Tyre: 4.00-18
Seat Height: 798 mm / 31.4 in.
Dry Weight: 236 kg / 520 lbs
Wet Weight: 255 kg / 562 lbs
Fuel Capacity: 20 L / 5.3 US gal
Reserve: 4.9 L / 1.3 US gal
Fuel Consumption: 6.0 L/100km / 16.6 km/l / 39 US mpg
Oil Capacity: 4.4 L / 4.7 US quarts
Standing 1/4 Mile: 12.4 sec
Top Speed: 200 km/h / 125 mph

The post Honda CB750K (1978-79) appeared first on MotorcycleSpecifications.com.

Honda CMX 250 Rebel (2007-09)

admin — Sat, 25 Mar 2023 11:20:10 +0000

The Honda CMX 250 Rebel motorcycle was produced from 2007 to 2009. It has a four-stroke, parallel twin-cylinder SOHC engine with a capacity of 234cc and a compression ratio of 9.2:1. The bike is air-cooled and has a single 26mm diaphragm-type constant-velocity carburetor. The ignition is digital CDI and it has an electric starter. The maximum power is 18.5 hp at 8250 rpm and the maximum torque is 18.6 Nm at 5500 rpm. The clutch is wet and cable-operated, and the transmission is five-speed with a final drive chain. The front suspension is a telescopic fork with 33mm travel and the rear suspension is dual shocks with five-position spring preload adjustability and 74mm travel. The front brakes are single 240mm discs with a two-piston caliper, while the rear has a 230mm drum. The wheels are fitted with a 3.00-18 front tire and a 130/90-15 rear tire, with a rake of 30 degrees and trail of 113mm. The wheelbase is 1450mm, the seat height is 676mm, and the dry weight is 141kg. The fuel capacity of the bike is 10 liters.

Technical specifications:

Make Model: Honda CMX 250 Rebel

Year: 2007-09
Engine: Four stroke, parallel twin cylinder. SOHC. 2 valve per cylinder
Capacity: 234 cc / 14.3 cu-in
Bore x Stroke: 53 x 53 mm
Cooling System: Air cooled
Compression Ratio: 9.2;1
Lubrication: Wet sump
Induction: Single 26mm diaphragm-type constant-velocity (CV) carburetor
Ignition: Digital CDI
Starting: Electric
Max Power: 18.5 hp / 13.5 kW @ 8250 rpm
Max Torque: 18.6 Nm / @ 5500 rpm
Clutch: Wet, cable operated
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 33mm Telescopic fork
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Dual shocks with five-position spring preload adjustability
Rear Wheel Travel: 74 mm / 2.9 in
Front Brakes: Single 240mm discs 2 piston caliper
Rear Brakes: 230mm Drum
Front Tyre: 3.00 -18
Rear Tyre: 130/90 -15
Rake: 30 degrees
Trail: 113 mm / 4.4 in
Wheelbase: 1450 mm / 57.1 in
Seat Height: 676 mm / 26.6 in
Dry Weight: 141 kg / 331 lbs
Fuel Capacity: 10 Litres / 2.6 gal

The post Honda CMX 250 Rebel (2007-09) appeared first on MotorcycleSpecifications.com.

Victory Vision (2007-08)

admin — Fri, 24 Mar 2023 15:23:03 +0000

The Victory Vision Tour motorcycle was produced in 2007-08 and is powered by a four-stroke, 50-degree V twin SOHC engine with a capacity of 1731cc. It has a compression ratio of 9.8:1, with electronic fuel injection and 45mm throttle bodies. The maximum power output is 96.9 hp / 71.3 kW and the maximum torque is 153 Nm / 15.6 kg-m. The clutch is wet and multi-plate and the transmission features six-speeds. The final drive is a carbon fiber reinforced belt.

The front suspension has a 43mm inverted cartridge telescopic fork, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage. The front brakes are two 300mm floating rotors with a three-piston caliper, while the rear brakes are a single 300mm floating rotor with a two-piston caliper. The front wheel travel is 130mm / 5.1in, and the rear wheel travel is 120mm / 4.7in. The front tire is 130/70 R18, and the rear tire is 180/60 R16.

The Victory Vision Tour’s seat height is 673mm/26.5in and has a gross vehicle weight rating (GVWR) of 643kg/1414lbs. The dry weight of the motorcycle is 365kg/852lbs, and it has a fuel capacity of 22.7 liters / 6 US gal.

Technical specifications:

Make Model: Victory Vision Tour

Year: 2007 – 08
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Seat Height: 673 mm / 26.5 in
GVWR: 643 kg / 1414 lbs
Dry Weight: 365 kg / 852 lbs
Fuel Capacity: 22.7 Litres / 6 US gal

The post Victory Vision (2007-08) appeared first on MotorcycleSpecifications.com.