Ducati Monster S4 Fogarty Archives - MotorcycleSpecifications.com

Ariel FH650 Huntsmaster (1954-58)

admin — Sat, 01 Apr 2023 22:26:03 +0000

The Ariel FH650 Huntsmaster (Solo) was a motorcycle produced from 1954-58. It had a four-stroke, twin, OHV engine with a capacity of 648 cc / 39.5 cu in and a compression ratio of either 6.5:1 or 7.5:1. The lubrication system was dry sump with a dual pump and the ignition was via a magneto. The transmission had four speeds and the final drive was via chain, 100 pitches. The frame was a swinging arm frame with front duplex down tubes and the front suspension was a telescopic fork with hydraulic control. The rear suspension included two flexible coil springs. The motorcycle had front and rear drum brakes and steel, laced wire-spoked wheels with a fuel capacity of 20.5 L / 5.4 US gal. It had a top speed of 161 km/h / 100 mph and average consumption of 5.1 L/100 km 19.5 km/l / 46 US mpg. The length was 2184 mm / 86 in and the width was 686 mm / 27 in. The wheelbase was 1422 mm / 56 in and the ground clearance was 140 mm / 5.5 in. The dry weight was 181 kg / 400 lbs and the seat height was 787 mm / 31 in. Photos of the motorcycle are available on NZ Classic Motorcycles.

Technical specifications:

Make Model: Ariel FH 650 Huntsmaster (Solo)

Year: 1954 – 58
Engine: Four stroke, twin, OHV
Capacity: 648 cc / 39.5 cu in
Bore x Stroke: 70 x 84 mm
Cooling System: Air cooled
Compression Ratio: 6.5:1 or 7.5:1
Lubrication: Dry sump, dual pump
Oil Capacity: 2.3 L / 4.8 US pt
Exhaust: Twin, chrome
Induction: Carburetor, Amal 376/12
Ignition: Magneto
Spark Plug: Champion L10S
Starting: Kick starting
Transmission: 4-Speed
Final Drive: Chain, 100 pitches
Gear Ratio: 1st 12.01 / 2nd 7.71 / 3rd 5.93 / 4th 4.53:1
Frame: Swinging arm frame with front duplex down tubes
Front Suspension: Telescopic fork with hydraulic control
Rear Suspension: 2 x Flexible coil springs
Front Brakes: Drum, 7 in
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.5 x 19
Dimensions: Length: 2184 mm / 86 in Width: 686 mm / 27 in
Wheelbase: 1422 mm / 56 in
Ground Clearance: 140 mm / 5.5 in
Seat Height: 787 mm / 31 in
Dry Weight: 181 kg / 400 lbs
Fuel Capacity: 20.5 L / 5.4 US gal
Average Consumption: 5.1 L/100 km 19.5 km/l / 46 US mpg
Top Speed: 161 km/h / 100 mph
Review: Some photos from NZ Classic Motorcycles

The post Ariel FH650 Huntsmaster (1954-58) appeared first on MotorcycleSpecifications.com.

Ariel HT 5 500 Trials (1956-59)

admin — Sat, 01 Apr 2023 14:08:09 +0000

The Ariel HT5 500 Trials motorcycle was produced between 1956 and 1959. It has an air-cooled, four-stroke, single cylinder, OHV engine with a capacity of 497 cc. It has a maximum power of 18.6 kW / 25 hp at 6000 rpm and is equipped with a 4-speed Burman transmission and a chain final drive. The front suspension consists of a telescopic fork while the rear is a swing arm with hydraulic dampers. The front and rear brakes are drums and the wheels are made of steel with laced wire spokes. The front rim is a 2.75 x 21 in and the rear is a 4.00 x 19 in. It has a ground clearance of 220 mm / 8.7 in and a dry weight of 132 kg / 291 lbs. Overall, the Ariel HT5 500 Trials is a classic motorcycle with a powerful engine and sturdy build.

Technical specifications:

Make Model: Ariel HT5 500

Year: 1956 – 59
Engine: Four stroke, single cylinder, OHV
Capacity: 497 cc / 30.3 cu in
Cooling System: Air cooled
Exhaust: 1-into-1
Induction: Carburetor
Starting: Kick start
Max Power: 18.6 kW / 25 hp @ 6000 rpm
Transmission: 4-Speed, Burman
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Swing arm, hydraulic dampers
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Front Rim: 2.75 x 21 in
Rear Rim: 4.00 x 19 in
Ground Clearance: 220 mm / 8.7 in
Dry Weight: 132 kg / 291 lbs

The post Ariel HT 5 500 Trials (1956-59) appeared first on MotorcycleSpecifications.com.

Ariel 4F Square Four (1932-36)

admin — Sat, 01 Apr 2023 13:05:04 +0000

The Ariel 4F Square Four 600 was produced from 1932 to 1936 and there were 2647 units made. It had a four stroke parallel twin engine with an overhead cam and a capacity of 601cc. The cooling system was air cooled with a compression ratio of 6.9:1. There were two 1-into-1 exhausts and a carburetor induction with a kick start for starting. In 1939, the motorcycle had a maximum power of 17 kW / 23 hp at 5600 rpm. The transmission was a four-speed Burman with final drive being a chain. The frame was made with brazed-lug tubular semi-cradle construction and duplex down-tube. The front suspension was Ariel centre spring girders while the rear suspension was rigid and a spring loaded saddle. The front and rear brakes were drum and measured 7 inches. The wheels were steel and had laced wire spokes with a front rim of 3.25 x 19 and a rear rim of 3.25 x 19. The wheelbase was 1384mm / 54.5 in and the dry weight was 168 kg / 370 lbs.

Technical specifications:

Make Model: Ariel 4F Square Four 600

Year: 1932 – 36
Production: 2647 units
Engine: Four stroke, parallel twin, OHC
Capacity: 601 cc / 36.7 cu in
Bore x Stroke: 56 x 61 mm
Cooling System: Air cooled
Compression Ratio: 6.9:1
Exhaust: 2 x 1-into-1
Induction: Carburetor
Starting: Kick start
Max Power: 17 kW / 23 hp @ 5600 rpm (1939 model)
Transmission: 4-Speed, Burman
Final Drive: Chain
Frame: Brazed-lug tubular semi-cradle construction, duplex down-tube
Front Suspension: Ariel centre spring girders
Rear Suspension: Rigid, spring loaded saddle
Front Brakes: Drum, 7 in
Rear Brakes: Drum, 7 in
Wheels: Steel, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.25 x 19
Wheelbase: 1384mm / 54.5 in
Dry Weight: 168 kg / 370 lbs

The post Ariel 4F Square Four (1932-36) appeared first on MotorcycleSpecifications.com.

Ariel VB 600 (1947-58)

admin — Mon, 27 Mar 2023 20:07:58 +0000

The Ariel VB 600 is a four-stroke, single cylinder, side valve motorcycle produced from 1947-58 with a 598cc capacity engine, 1-into-1 chrome exhaust, and Amal monobloc 376/13 carburetor. It has a dry sump lubrication system, kick start, and a maximum power of 11.6 kW / 15.5 hp at 4400 rpm. The clutch is dry and multiplate, with a 4-speed transmission and chain final drive. The gear ratios vary based on the sprocket size. Both front and rear brakes are drum, and the motorcycle has steel wheels with laced wire spokes and 3.25 x 19 front and 3.50 x 19 rear tires. Its dimensions are 2184 mm in length, 686 mm in width, and with a wheelbase of 1422 mm and ground clearance of 127 mm. The wet weight of the Ariel VB 600 is 166 kg with a fuel capacity of 15.9 L / 4.2 US gal.

Technical specifications:

Make Model: Ariel VB 600

Year: 1947 – 58
Engine: Four stroke, single cylinder, side valve
Capacity: 598 cc / 36.5 cu in
Bore x Stroke: 86.4 x 102.0 mm
Cooling System: Air cooled
Compression Ratio: 5.0:1
Lubrication: Dry sump
Exhaust: 1-into-1, Chrome
Induction: Carburetor, Amal monobloc 376/13
Battery: 6V
Starting: Kick start
Max Power: 11.6 kW / 15.5 hp @ 4400 rpm
Clutch: Dry, multiplate
Transmission: 4-Speed, Burman
Final Drive: Chain
Gear Ratios: (23T sprocket) 1st 12.6 / 2nd 8.0 / 3rd 6.0 / 4th 4.7:1 (21T sprocket) 1st 13.9 / 2nd 8.6 / 3rd 6.5 / 4th 5.2:1 (20T sprocket) 1st 14.5 / 2nd 8.8 / 3rd 6.8 / 4th 5.4:1 (19T sprocket) 1st 15.3 / 2nd 9.7 / 3rd 7.2 / 4th 5.7:1 (18T sprocket) 1st 16.2 / 2nd 10.0 / 3rd 7.6 / 4th 6.0:1 (17T sprocket) 1st 17.2 / 2nd 10.6 / 3rd 8.0 / 4th 6.4:1
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Front Tyre: 3.25 x 19
Rear Tyre: 3.50 x 19
Dimensions: Length: 2184 mm / 86 in Width: 686 mm / 27 in
Wheelbase: 1422 mm / 56 in
Ground Clearance: 127 mm / 5.0 in
Wet Weight: 166 kg / 365 lbs
Fuel Capacity: 15.9 L / 4.2 US gal

The post Ariel VB 600 (1947-58) appeared first on MotorcycleSpecifications.com.

Ariel VH 500 Red Hunter (1932-59)

admin — Mon, 27 Mar 2023 18:10:05 +0000

The Ariel VH 500 Red Hunter is a motorcycle that was produced between 1932 and 1959. Its engine is a four-stroke, single-cylinder, OHV, 2-valve, with a capacity of 497cc/30.3 cubic inches. The bike has a high-set dual port exhaust and carburetor, large bore down draught Amal induction. The ignition is a magnet/flywheel and the bike runs on a 6-volt battery with a dry sump lubrication system and a dual plunger pump. The bike has a 4-speed transmission and a maximum power output of 17.9 kW / 24hp @ 6000rpm. The frame is a semi-double cradle, with grider front forks and either a rigid, spring-loaded saddle or dual shocks in later models. The bike has drum brakes on both the front and rear wheels and steel, laced wire spoke wheels with a front rim size of 3.00 x 20 and a rear rim size of 3.25 x 19. The dimensions of the bike are 2180mm (length) and 640mm (width) with a dry weight of 190kg/418lbs and a fuel capacity of 14.8L/3.9US gallons. The Red Hunter comes in chrome and red with gold linings and can reach a top speed of 140km/h / 87mph. The bike can brake from 25mph/40km/h to a stop in 7.3m/24ft and can reach 0-60mph/97km/h in 10.9 seconds.

Technical specifications:

Make Model: Ariel VH 500 Red Hunter

Year: 1932 – 59
Engine: Four stroke, stroke, single cylinder, OHV, 2-valves
Capacity: 497 cc / 30.3 cu in
Bore x Stroke: 86.4 x 85 mm (after 1936: 81.8 x 95)
Cooling System: Air cooled
Compression Ratio: 6.0:1 (after 1954: 6.8:1)
Lubrication: Dry sump with dual plunger pumps
Oil Capacity: 3.4 L / 0.9 US gal
Exhaust: High-set dual port exhaust
Induction: Carburetor, large bore down draught Amal
Ignition: Magnet/flywheel
Battery: 6V
Starting: Kick start
Max Power: 17.9 kW / 24 hp @ 6000 rpm
Transmission: 4-Speed
Final Drive: Chain
Frame: Semi double cradle
Front Suspension: Grider front forks
Rear Suspension: Rigid, springloaded saddle (after 1954: dual shocks)
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Front Rim: 3.00 x 20
Rear Rim: 3.25 x 19
Dimensions: Length: 2180 mm / 85.8 in Width: 640 mm / 25.2 in
Dry Weight: 190 kg / 418 lbs
Fuel Capacity: 14.8 L / 3.9 US gal
Braking 25 mph / 40 km/h – 0: 7.3 m / 24 ft
Acceleration 0 – 60 mph / 97 km/h: 10.9 sec
Top Speed: 140 km/h / 87 mph
Colours: Chrome and red with gold linings

The post Ariel VH 500 Red Hunter (1932-59) appeared first on MotorcycleSpecifications.com.

Ariel LH 200 Colt (1954-59)

admin — Mon, 27 Mar 2023 10:19:58 +0000

The Ariel LH 200 Colt motorcycle was manufactured between 1954 and 1959. Powered by a four-stroke, single-cylinder, OHV, 2-valve engine with a capacity of 197cc, it boasted a compression ratio of 7.5:1 and a 1-into-1, chrome exhaust. The bike had a carburetor induction, battery/coil ignition, and a 6V battery. Kick start was the method for firing up the engine, which worked in tandem with a multiple dry plate clutch system and a four-speed transmission. The final drive was via a chain. The frame was a semi-double cradle design, which held up telescopic hydraulic fork front suspension and plungers on the rear. The wheels were made of steel with laced wire spokes, while the drum brakes were situated at the front and rear. The bike was 2,030mm long by 640mm wide, with a dry weight of 123 kg and a fuel capacity of 11L. It achieved an average fuel consumption of 3.5 L/100km and had a top speed of 100 km/h.

Technical specifications:

Make Model: Ariel LH 200 Colt

Year: 1954 – 59
Engine: Four stroke, single cylinder, OHV, 2-valve
Capacity: 197 cc / 12 cu in
Bore x Stroke: 60 x 70 mm
Cooling System: Air cooled
Compression Ratio: 7.5:1
Exhaust: 1-into-1, Chrome
Induction: Carburetor
Ignition: Battery/coil
Battery: 6V
Starting: Kick start
Clutch: Multiple dry plate
Transmission: 4-Speed
Final Drive: Chain
Frame: Semi double cradle
Front Suspension: Telescopic hydraulic fork
Rear Suspension: Plungers
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Front Rim: 2.75 x 19
Rear Rim: 2.75 x 19
Dimensions: Length: 2030 mm / 79.9 in Width: 640 mm / 25.2 in
Dry Weight: 123 kg / 271 lbs
Fuel Capacity: 11 L / 2.9 US gal
Average Consumption: 3.5 L/100 km / 28.3 km/l / 66.6 US mpg
Top Speed: 100 km/h / 62 mph

The post Ariel LH 200 Colt (1954-59) appeared first on MotorcycleSpecifications.com.

Ariel KH500 Fieldmaster (1948-57)

admin — Mon, 27 Mar 2023 08:36:56 +0000

The Ariel KH 500 Fieldmaster was a motorcycle produced between 1948 and 1957. It had a four-stroke, twin engine with a capacity of 498cc and a compression ratio of 7.5:1. The engine was air-cooled and had a dry sump lubrication system. The bike had a Bruman 4-speed transmission and a chain-driven final drive. It had a duplex loop frame, telescopic forks for the front suspension, and a rigid, spring-loaded saddle for the rear (later models had a swinging arm). The wheels were steel with laced wire spokes and had a front rim of 3.00 x 20 and rear rim of 3.50 x 19. The bike had a top speed of 145 km/h or 90 mph and a fuel capacity of 17 L or 4.5 US gal. The Ariel KH 500 Fieldmaster was sold in chrome and scarlet enamel.

Technical specifications:

Make Model: Ariel KH 500 Fieldmaster

Year: 1948 – 57
Engine: Four stroke, stroke, twin
Capacity: 498 cc / 30.4 cu in
Bore x Stroke: 56 x 86 mm
Cooling System: Air cooled
Compression Ratio: 7.5:1
Lubrication: Dry sump
Exhaust: 2-into-2, Chrome
Induction: Carburetor
Starting: Kick
Max Power: 20.9 kW / 28 hp @ 6500 rpm
Clutch: Dry clutch
Transmission: Bruman 4-speed
Final Drive: Chain
Frame: Duplex loop
Front Suspension: Telescopic forks
Rear Suspension: Rigid, spring loaded saddle (as from 1957: swinging arm)
Wheels: Steel, laced wire spokes
Front Rim: 3.00 x 20
Rear Rim: 3.50 x 19
Wheelbase: 1422 mm / 56 in
Dry Weight: 177 kg / 390 lbs
Fuel Capacity: 17 L / 4.5 US gal
Top Speed: 145 km/h / 90 mph
Colours: Chrome and scarlet enamel
Source: Bonhams

The post Ariel KH500 Fieldmaster (1948-57) appeared first on MotorcycleSpecifications.com.

Ducati Monster S4 Fogarty (2001)

admin — Mon, 27 Mar 2023 02:01:00 +0000

The Ducati Monster S4 Fogarty is a 2001 motorcycle that boasts a four-stroke, 90-degree L twin cylinder engine with desmodromic 4 valves per cylinder and a 916cc capacity. It features a Marelli electronic fuel injection system and an analogue CDI ignition with a maximum power of 74 kW at 8750 rpm and a maximum torque of 92 Nm at 7000 rpm. The motorcycle has a dry multiplate clutch with hydraulic control, a 6-speed transmission, and a chain final drive. It has a tubular steel trellis frame with a Showa 43mm upside-down fully adjustable fork and a progressive linkage with fully adjustable Sachs monoshock with piggyback aluminum swingarm suspension system. The front brakes have 2 x 320mm discs with 4-piston calipers, and the rear brake has a single 245mm disc with a 2-piston caliper. The 120/70 ZR17 front tire and 180/55 ZR17 rear tire are mounted on 17-inch wheels, providing a ground clearance of 148mm. The motorcycle has a dry weight of 193kg, a fuel capacity of 15 liters, and a consumption average of 5.3L/100km. It has a top speed of 239km/h and can go through a standing 1/4 mile in 11.1 seconds at a speed of 198km/h.

Technical specifications:

Make Model: Ducati Monster S4 Fogarty

Year: 2001
Engine: Four stroke, 90 degrees L twin cylinder, DOHC, desmodromic 4 valves per cylinder
Capacity: 916 cc / 55.9 cu in
Bore x Stroke: 94 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/40
Induction: Marelli electronic fuel injection,50mm throttle body
Ignition: Analogue CDI (Capacitive Discharge Ignition)
Spark Plug: Champion, RA59GC
Starting: Electric
Max Power: 74 kW / 101 hp / @ 8750 rpm
Max Torque: 92 Nm / 9.3 kgf-m / 67.85 ft-lb @ 7000 rpm
Clutch: Dry multiplate with hydraulic control
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel trellis
Front Suspension: Showa 43 mm upside-down fully adjustable fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Progressive linkage with fully adjustable Sachs monoshock with piggy back aluminum swing arm.
Rear Wheel Travel: 148 mm / 5.8 in
Front Brakes: 2 x 320 mm Discs, 4 piston calipers
Rear Brakes: Single 245 mm disc, 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Rake: 24 degrees
Trail: 96 mm / 3.8 in
Dimensions: Length: 2121 mm / 83.5 in Width: 885 mm / 34.8 in Height 1222 mm / 48.1 in
Wheelbase: 1440 mm / 56.7 in
Seat Height: 803 mm / 31.6 in
Dry Weight: 193 kg / 425.5 lbs
Fuel Capacity: 15 Litres / 4.0 US gal / 3.3 Imp gal
Reserve: 3.5 L / 0.9 US gal / 0.8 Imp gal
Consumption Average: 5.3 L/100 km / 18.7 km/l / 44 US mpg / 53 Imp mpg
Standing 1/4 Mile: 11.1 sec / 198 km/h / 123 mph
Top Speed: 239 km/h / 148.5 mph

The post Ducati Monster S4 Fogarty (2001) appeared first on MotorcycleSpecifications.com.

Ariel NH 350 Red Hunter (1945-59)

admin — Sun, 26 Mar 2023 05:27:05 +0000

The Ariel NH 350 Red Hunter motorcycle was produced from 1945 to 1959 and featured a four-stroke, single cylinder, overhead valve engine with a 346 cc capacity. It had a bore x stroke of 72 x 85 mm and was cooled by air. The compression ratio was 6.2:1, later increased to 7.5:1 in 1957. The exhaust was 1-into-1 and the carburetor provided the induction. The bike was powered by a magneto/flywheel ignition and kicked off a 6V battery. It provided a maximum power of 14.2 kW / 19.4 hp at 5800 rpm. The clutch was a dry, multiplate type and the transmission had four speeds. The final drive was chain and the gear ratios varied, depending on the sprocket, with a top speed of 117 km/h or 72.7 mph. The frame had a semi-double cradle and the front suspension featured a telescopic fork, while the rear suspension had plungers. Both front and rear brakes were drums. The wheels were made of steel with laced wire spokes and the front rim measured 3.00 x 20, while the rear rim was 3.25 x 19. The bike was 2180 mm or 85.8 in long, 640 mm or 25.2 in wide, and weighed 159 kg or 350.5 lbs dry. It had a fuel capacity of 11 L or 2.9 US gallons.

Technical specifications:

Make Model: Ariel NH 350 Red Hunter

Year: 1945 – 59
Engine: Four stroke, single cylinder, OHV
Capacity: 346 cc / 21.1 cu in
Bore x Stroke: 72 x 85 mm
Cooling System: Air cooled
Compression Ratio: 6.2:1 (after 1957: 7.5:1)
Exhaust: 1-into-1
Induction: Carburetor
Ignition: Magneto/flywheel
Battery: 6V
Starting: Kick start
Max Power: 14.2 kW / 19.4 hp @ 5800 rpm
Clutch: Dry, multiplate
Transmission: 4-Speed
Final Drive: Chain
Gear Ratios: (20T sprocket) 1st 15.3 / 2nd 10.1 / 3rd 7.3 / 4th 5.7:1 (19T sprocket) 1st 16.1 / 2nd 10.6 / 3rd 7.7 / 4th 6.0:1 (18T sprocket) 1st 17.0 / 2nd 11.2 / 3rd 8.2 / 4th 6.4:1 (17T sprocket) 1st 18.0 / 2nd 11.9 / 3rd 8.7 / 4th 6.8:1
Frame: Semi-double cradle
Front Suspension: Telescopic fork, hydraulic
Rear Suspension: Plungers
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Steel, laced wire spokes
Front Rim: 3.00 x 20
Rear Rim: 3.25 x 19
Dimensions: Length: 2180 mm / 85.8 in Width: 640 mm / 25.2 in
Dry Weight: 159 kg / 350.5 lbs
Fuel Capacity: 11 L / 2.9 US gal
Top Speed: 117 km/h / 72.7 mph

The post Ariel NH 350 Red Hunter (1945-59) appeared first on MotorcycleSpecifications.com.

Ariel W/NG350 (1940-44)

admin — Sun, 26 Mar 2023 04:45:14 +0000

The Ariel W/NG 350 motorcycle was produced from 1940-44 with a total production of 35,540 units. It had a four-stroke single cylinder, OHV, 2-valve engine with a capacity of 348cc and a maximum power output of 12.7kW/17hp @ 5800rpm. The bike had a 4-speed transmission and chain final drive, along with a Grider front fork and a rigid, spring loaded saddle for suspension. The wheels were made of steel laced wire spokes with both front and rear rims measuring 3.25 x 19. The bike dimensions were 2130mm in length, 760mm in width and 1060mm in height. The dry weight was 169kg with a fuel capacity of 11.9L. The bike had a kick start with a 6V battery and used a dynamo coil ignition system with oil capacity of 2.3L. The lubrication system was a dry sump, with an oil tank and pump located under the saddle. The bike also featured a 1-into-1 exhaust system and carburetor induction.

Technical specifications:

Make Model: Ariel W/NG 350

Year: 1940 – 44
Production: 35 540
Engine: Four stroke, single cylinder, OHV, 2-valves
Capacity: 348 cc / 21.2 cu in
Bore x Stroke: 72 x 85 mm
Cooling System: Air cooled
Lubrication: Dry sump, oil tank and pump under saddle
Oil Capacity: 2.3 L / 4.8 US pt
Exhaust: 1-into-1
Induction: Carburetor
Ignition: Dynamo, coil
Battery: 6V
Starting: Kick start
Max Power: 12.7 kW / 17 hp @ 5800 rpm
Transmission: 4-Speed, Burman
Final Drive: Chain
Front Suspension: Grider front fork
Rear Suspension: Rigid, spring loaded saddle
Wheels: Steel, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.25 x 19
Dimensions: Length: 2130 mm / 84 in Width: 760 mm / 30 in Height: 1060 mm / 42 in
Dry Weight: 169 kg / 373 lbs
Fuel Capacity: 11.9 L / 3.2 US gal
Source: Wikipedia

The post Ariel W/NG350 (1940-44) appeared first on MotorcycleSpecifications.com.