Aprilia RS 125 R Valentino Rossi Replica (1999-00)

admin — Tue, 28 Mar 2023 00:14:08 +0000

The Aprilia RS 125 R Valentino Rossi Replica motorcycle was produced in 1999-2000 and features a single cylinder, two-stroke engine with reed valve induction and 125cc capacity. The compression ratio is 14.5:1 and the cooling system is liquid-cooled with Dell’Orto VHSB 34LD induction and electronic ignition. The motorcycle has a maximum power output of 24.8 kW / 34 hp at 11,000 rpm and a max torque of 25 Nm / 2.5 kgf-m / 18.4 lb-ft at 9,000 rpm.

The transmission is a 6-speed manual with final drive being delivered through a chain mechanism. It has upside-down front forks of 40mm and a rear monoshock with 120mm / 4.7inch wheel travel. The front brakes consist of a single 320mm disc with a 4-piston caliper and the rear brakes comprise of a single 240mm disc with a 2-piston caliper.

The front and rear tyre sizes are 110/70-17 and 150/60-17, respectively. The dry weight of the motorcycle is 115 kg / 254 lbs. The motorcycle is popular among racing enthusiasts as it is a reliable and powerful vehicle with good suspension and braking systems.

Technical specifications:

Make Model: Aprilia RS 125 R Valentino Rossi Replica

Year: 1999 – 00
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 14.5:1
Cooling System: Liquid cooled
Induction: Dell’Orto VHSB 34LD
Ignition: Electronic
Starting: Electric
Max Power: 24.8 kW / 34 hp @ 11000 rpm
Max Torque: 25 Nm / 2.5 kgf-m / 18.4 lb-ft @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 320 mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17
Dry Weight: 115 kg / 254 lbs

The post Aprilia RS 125 R Valentino Rossi Replica (1999-00) appeared first on MotorcycleSpecifications.com.

Ducati 916 Senna III (1998)

admin — Sat, 25 Mar 2023 07:42:20 +0000

The Ducati 916 Senna III is a motorcycle produced in 1998. It features a four stroke, 90 degrees L twin cylinder engine with a capacity of 916 cc. The engine has a compression ratio of 11.0:1, and the fuel-injection system used is the Weber I.A.W. CPU P8 electronic indirect injection. The motorcycle has a dry, multiplate clutch and a six-speed transmission. It weighs 198 kg dry, and its fuel capacity is 17 L / 4.4 US gal / 3.7 Imp gal. The front suspension of the Ducati 916 Senna III consists of a 43 mm adjustable Showa GD051 inverted fork, with 127 mm wheel travel, while the rear suspension is an ~Ahlins DU 3420 progressive cantilever linkage with adjustable monoshock, with a wheel travel of 130 mm. The hydraulic front brakes are two 320 mm discs with four-piston calipers, and the rear brake is a single 220 mm disc with a two-piston caliper. The front and rear wheels of the motorcycle are 17 inches, with the front wheel being 3.50 inches wide and the rear wheel being 5.50 inches wide. The motorcycle has a top speed of 255.1 km/h or 158.5 mph and it can do standing 1/4 mile in 10.6 seconds with a top speed of 207.4 km/h or 128.9 mph. The braking distance from 60 km/h to 0 is 12.9 m / 42.3 ft, and from 100 km/h to 0 is 39.9 m / 131 ft.

Technical specifications:

Make Model: Ducati 916 Senna III

Year: 1998
Engine: Four stroke, 90 degrees L twin cylinder, DOHC, desmodromic 4 valve per cylinder, belt driven
Capacity: 916 cc / 55.9 cu in
Bore x Stroke: 94 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Induction: Weber I.A.W. CPU P8 electronic indirect injection
Spark Plugs: Champion RA59GC
Lubrication: Wet sump
Engine Oil: Synthetic, 15w-50
Ignition: Electronic I.A.W
Battery: 12V 16Ah
Starting: Electric
Max Power: 83.8 kW / 114 hp @ 9000 rpm
Max Torque: 90 Nm / 9 kgf-m / 66.3 lb-ft @ 7000 rpm
Clutch: Dry, multiplate
Transmission: 6 Speed
Primary Drive Ratio: 2:1 (31/62)
Gear Ratios: 1st 2.466 / 2nd 1.765 / 3rd 1.350 / 4th 1.091 / 5th 0.958 / 6th 0.857
Final Drive Ratio: 2.4:1 (15/36)
Final Drive: Chain
Frame: Steel, Trellis frame
Front Suspension: 43 mm Adjustable Showa GD051 inverted fork
Front Wheel Travel: 127 mm / 5.0 in
Rear Suspension: ~Ahlins DU 3420 progressive cantilever linkage with adjustable monoshock
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x 320 mm Discs, 4 piston calipers
Rear Brakes: Single 220 disc, 2 piston caliper
Front Wheel: 3.50 x 17
RearWheel: 5.50 x 17
Front Tyre: 120/70 ZR17
Rear Tyre: 190/50 ZR17 or 180/55 ZR17
Rake: Adjustable 24o – 25o
Trail: 94 – 100 mm / 3.7 – 3.9 in
Dimensions: Length 2050 mm / 80.7 in Width 685 mm / 27.0 in Height 1090 mm / 42.9 in
Wheelbase: 1410 mm / 56.6 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 198 kg / 436 lbs
Wet Weight: 204 kg / 450 lbs
Fuel Capacity: 17 L / 4.4 US gal / 3.7 Imp gal
Reserve: 4 L / 1.1 IS gal / 0.9 Imp gal
Consumption Average: 5.4 L/100 km / 18.5 km/l / 43.5 US mpg / 52.3 Imp mpg
Braking 60 km/h – 0: 12.9 m / 42.3 ft
Braking 100 km/h – 0: 39.9 m / 131 ft
Standing 1/4 Mile: 10.6 sec / 207.4 km/h / 128.9 mph
Top Speed: 255.1 km/h / 158.5 mph

The post Ducati 916 Senna III (1998) appeared first on MotorcycleSpecifications.com.

Ducati 916 Senna III Archives - MotorcycleSpecifications.com

Aprilia RS 125 R Valentino Rossi Replica (1999-00)

Technical specifications:

Ducati 916 Senna III (1998)

Technical specifications: