Ducati 250 Scrambler Archives - MotorcycleSpecifications.com

Ducati 250 Scrambler (1962-64)

admin — Wed, 05 Apr 2023 21:11:08 +0000

The Ducati 250 Scrambler was manufactured between 1962 and 1964. The motorcycle is powered by a four-stroke, single-cylinder, Desmo SOHC engine, with a capacity of 249.2 cc and a compression ratio of 9.2:1. The bike uses an air-cooling system and is equipped with a Dell’Orto 29 mm carburetor and coil ignition. The engine can produce a maximum power of 13.2 kW at 7500 rpm. The motorcycle has a wet, multiplate clutch and a 5-speed transmission with a final chain drive. The Scrambler uses a hydraulic fork for the front suspension and a swingarm, dual shocks for the rear. The bike has 180mm and 160mm drum brakes in the front and rear, respectively. The wheels are fitted with 3.50-19 and 4.00-18 tires. The Scrambler is 2020 mm long, 820 mm wide, and 1050 mm tall, with a wheelbase of 1350 mm and a seat height of 750 mm. The motorcycle has a ground clearance of 130 mm and weighs 109 kg. The fuel tank capacity is 11 L. The Ducati 250 Scrambler is known for its off-road capabilities and was a popular motorcycle among riders of the time.

Technical specifications:

Make Model: Ducati 250 Scrambler

Year: 1962 – 64
Engine: Four stroke, single cylinder, Desmo SOHC, bevel gear driven
Capacity: 249.2 cc / 15.2 cu in
Bore x Stroke: 73.7 x 58.4 mm
Compression Ratio: 9.2:1
Cooling System: Air cooled
Induction: Dell’Orto 29 mm carburetor
Ignition: Coil, generator
Starting: Kick
Max Power: 13.2 kW / 18 hp @ 7500 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic fork
Rear Suspension: Swingarm,dual shocks
Front Brakes: 180mm Drum
Rear Brakes: 160mm Drum
Front Tyre: 3.50-19
Rear Tyre: 4.00-18
Dimensions: Length: 2020 mm / 79.5 in Width: 820 mm / 32.3 in Height: 1050 mm / 41.3 in
Wheelbase: 1350 mm / 53.1 in
Seat Height: 750 mm / 29.5 in
Ground Clearance: 130 mm / 5.1 in
Dry Weight: 109 kg / 240 lbs
Fuel Capacity: 11 L / 2.9 US gal / 2.4 Imp gal

The post Ducati 250 Scrambler (1962-64) appeared first on MotorcycleSpecifications.com.

Ducati 250 Scrambler (1965-66)

admin — Wed, 05 Apr 2023 09:52:00 +0000

The Ducati 250 Scrambler was produced between 1965 and 1966, boasting a single cylinder Desmo SOHC engine with a capacity of 248cc. This motorcycle had a highly resistant tubular steel frame and was equipped with hydraulic telescopic forks for front suspension and dual shocks at the rear. The bike had a maximum power output of 18 hp at 7500 rpm and a five-speed transmission. The front and rear brakes were 180mm and 160mm drums, respectively, while the front and rear tires were 3.50-19 and 4.00-18 in size. The bike had a wet weight of 138 kg and a fuel capacity of 11 litres.

Technical specifications:

Make Model: Ducati 250 Scrambler

Year: 1965 – 66
Engine: Four stroke, single cylinder, Desmo SOHC, 2 valve
Capacity: 248 cc / 15.1 cu-in
Bore x Stroke: 74 x 57.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Induction: 29mm Dell’Orto carburetor
Electrics: Fywheel alternator and electronic regulator
Starting: Kick
Max Power: 13.5 kW / 18 hp @ 7500 rpm
Transmission: 5 Speed
Final Drive: Chain
Frame: Highly resistant tubular steel frame
Front Suspension: Hydraulic telescopic forks
Rear Suspension: Dual chocks
Front Brakes: 180mm Drum
Rear Brakes: 160mm Drum
Front Tyre: 3.50-19
Rear Tyre: 4.00-18
Wet Weight: 138 kg / 304.2 lbs
Fuel Capacity: 11 Litres / 2.9 US gal / 2.4 Imp gal

The post Ducati 250 Scrambler (1965-66) appeared first on MotorcycleSpecifications.com.

Ducati 250 Scrambler (1967-75)

admin — Sun, 26 Mar 2023 20:47:06 +0000

The Ducati 250 Scrambler was a popular motorcycle model produced between 1967 and 1975. It featured a four-stroke, single-cylinder, Desmo SOHC engine with a capacity of 248.6 cc and a compression ratio of 9.2:1. The bike had a kick-start and a clutch system of wet, multiplate design. It used a chain final drive with a ratio of 3.000:1, and a tubular steel frame provided the foundation. The front suspension consisted of a Marzocchi hydraulic telescopic fork, while a swingarm with Marzocchi dual shocks supported the rear. Both front and rear brakes were drum models with 180mm and 160mm diameters, respectively. The bike had a length of 2120 mm, a width of 940 mm, and a height of 1150 mm. It also featured a wheelbase of 1380 mm and a dry weight of 132 kg. Its fuel capacity was 11 litres. The bike was produced with different carburettors during different years of production: the Dell’Orto SS1 27D in the 1967-1969 models, the Dell’Orto VHB26BD in 1970-1972 models, and the Amal 27 mm in 1973-1975 models. The bike’s maximum power was 14.1 kW or 19 hp generated at 7500 rpm. The model’s front tyre measured 3.50-19 and the rear tyre 4.00-18, both made by Pirelli.

Technical specifications:

Make Model: Ducati 250 Scrambler

Year: 1967 – 75
Engine: Four stroke, single cylinder, Desmo SOHC, 2 valve, bevel gear-driven
Capacity: 248.6 cc / 15.2 cu-in
Bore x Stroke: 74 x 57.8 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: 1967-69:Dell’Orto SS1 27D 1970-72: Dell’Orto VHB26BD 1973-75: Amal 27 mm
Ignition: Points and coil, 6V 30W generator
Battery: SAFA 3L3 13.5 Ah
Starting: Kick
Max Power: 14.1 kW / 19 hp @ 7500 rpm
Clutch: Wet, multiplate
Primary Drive Ratio: 2.500:1
Transmission: 5 Speed
Gear Ratios: 1st 2.46 / 2nd 1.73 / 3rd 1.35 / 4th 1.10 / 5th 0.97:1
Final Drive: Chain
Final Drive Ratio: 3.000:1
Frame: Highly resistant tubular steel frame
Front Suspension: Marzocchi hydraulic telescopic fork, 35 mm
Rear Suspension: Swingarm, Marzocchi dual shocks, 3-way adjustable
Front Brakes: 180mm Drum
Rear Brakes: 160mm Drum
Front Tyre: 3.50-19, Pirelli
Rear Tyre: 4.00-18, Pirelli
Dimensions: Length: 2120 mm / 83.5 in Width: 940 mm / 37.0 in Height: 1150 mm / 45.3 in
Wheelbase: 1380 mm / 54.3 in
Seat Height: 770 mm / 30.3 in
Dry Weight: 132 kg / 291 lbs
Fuel Capacity: 11 Litres / 2.9 US gal / 2.4 Imp gal

The post Ducati 250 Scrambler (1967-75) appeared first on MotorcycleSpecifications.com.