Ducati 200 Elite / SS Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 22:44:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Ducati 200 Elite / SS (1961-65) https://motorcyclespecifications.com/ducati-200-elite-ss-1961-65-specs/ Tue, 04 Apr 2023 10:41:08 +0000 https://motorcyclespecifications.com/?p=44223 The Ducati 200 Elite/SS was a motorcycle model produced from 1961 to 1965. It featured a four-stroke, single-cylinder, SOHC engine with 2 valves per cylinder, and had a capacity of

The post Ducati 200 Elite / SS (1961-65) appeared first on MotorcycleSpecifications.com.

]]> The Ducati 200 Elite/SS was a motorcycle model produced from 1961 to 1965. It featured a four-stroke, single-cylinder, SOHC engine with 2 valves per cylinder, and had a capacity of 203.8 cc. The bike had a Dell’Orto UBF24BS carburetor and points & coil ignition with a 6V 40W generator. It had a maximum power output of 13.1 kW (18 hp) at 7500 rpm. The engine had a primary drive ratio of 2.520:1 and a final drive ratio of 2.812:1, and the bike had a 4-speed transmission. The chassis was a single cradle design with a hydraulic telescopic fork for the front suspension, and the rear suspension was a swingarm with dual Marzocchi shocks that were 3-way adjustable. The bike had drum brakes, with a 180 mm drum at the front and a 160 mm drum at the rear. The front tyre size was 2.75 -18, while the rear tyre size was 3.00 -18 (GT: 2.75-18). The bike had a length of 2000 mm (78.7 in), a width of 580 mm (22.8 in), and a height of 965 mm (38.0 in). It had a dry weight of 111 kg (244 lbs) and a fuel capacity of 17 L (4.5 US gal/3.7 Imp gal). The top speed of the bike was 140 km/h (87 mph).

Technical specifications:

Make Model: Ducati 200 Elite / SS

Year: 1961 – 65
Engine: Four stroke, single cylinder, SOHC, shaft and bevel gear driven, 2 valves per cylinder
Capacity: 203.8 cc / 12.4 cu in
Bore x Stroke: 67 x 57.8 mm
Compression Ratio: 7.8:1
Induction: Dell’Orto UBF24BS carburetor
Ignition: Points & coil, 6V 40 W generator
Spark Plug: Marelli CW250A
Battery: SAFA 3L3, 13.5Ah
Starting: Kick
Max Power: 13.1 kW 18 hp @ 7500 rpm
Clutch: Multi wet plate
Transmission: 4 Speed
Primary Drive Ratio: 2.520:1
Gear Ratios: 1st 2.75 / 2nd 1.65 / 3rd 1.18 / 4th 0.97:1
Final Drive Ratio: 2.812:1
Final Drive: Chain
Frame: Single cradle
Front Suspension: Hydraulic telescopic forks, Ducati 31.5 mm
Rear Suspension: Swingarm, dual Marzocchi shocks, 3-way adjustable
Front Brakes: 180 mm Drum
Rear Brakes: 160 mm Drum
Front Tyre: 2.75 -18
Rear Tyre: 3.00 -18 (GT: 2.75-18)
Dimensions: Length: 2000 mm / 78.7 in Width: 580 mm / 22.8 in Height: 965 mm / 38.0 in
Wheelbase: 1320 mm / 52.0 in
Dry Weight: 111 kg / 244 lbs
Fuel Capacity: 17 L / 4.5 US gal / 3.7 Imp gal
Top Speed: 140 km/h / 87 mph

The post Ducati 200 Elite / SS (1961-65) appeared first on MotorcycleSpecifications.com.

]]> Victory Cross Roads (2014) https://motorcyclespecifications.com/victory-cross-roads-2014-specs/ Sun, 26 Mar 2023 04:35:09 +0000 https://motorcyclespecifications.com/?p=31801 The Victory Cross Roads Classic is a 2014 motorcycle with a four-stroke, 50-degree V twin SOHC engine featuring 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike

The post Victory Cross Roads (2014) appeared first on MotorcycleSpecifications.com.

]]> The Victory Cross Roads Classic is a 2014 motorcycle with a four-stroke, 50-degree V twin SOHC engine featuring 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike has a capacity of 1731cc/106 cu-in with a bore x stroke of 101 x 108 mm and is air/oil cooled with a compression ratio of 9.8:1. The exhaust is split dual with a crossover, and the oil capacity is 4.73 litres. The motorcycle is electronically fuel injected with 45mm throttle bodies and has electric starting. The maximum power is 96.9 hp/71.3 kW, and the maximum torque is 153 Nm/15.6 kg-m. The clutch is wet, multi-plate and the transmission is six-speed with a final drive of carbon fiber reinforced belt. The front suspension is a 43mm conventional telescopic fork with front wheel travel of 130mm/5.1in. The rear suspension is a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage and a preload adjustable spring with rear wheel travel of 120mm/4.7in. The front brakes are 2x 300mm floating rotor with 3-piston caliper, and the rear brake is a single 300mm floating rotor with 2-piston caliper. The front tire is 130/70 R18 and the rear tire is 180/60 R16. The dimensions of the motorcycle are length 2702mm/106.4in, wheelbase of 1670mm/65.7in, and seat height of 673mm/26.4in. The GVWR is 618kg/1360lbs, the dry weight is 338kg/745lbs, and the fuel capacity is 22.7 litres/5.8 US gal.

Technical specifications:

Make Model: Victory Cross Roads Classic

Year: 2014
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.8:1
Exhaust: Split dual exhaust with crossover
Oil Capacity: 4.73 Litres
Induction: Electronic Fuel Injection with 45mm throttle bodies
Starting: -Electric
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon fiber reinforced belt
Front Suspension: 43mm Conventional telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkagel, preload adjustable spring
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300mm floating rotor 3 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 R18
Rear Tyre: 180/60 R16
Dimensions: Length 2702 mm / Length 106.4 in / 2702 mm
Wheelbase: 1670 mm / 65.7 in
Seat Height: 673 mm / 26.4 in
GVWR: 618 kg / 1360 lbs
Dry Weight: 338 Kg / 745 lbs
Fuel Capacity: 22.7 Litres / 5.8 US gal

The post Victory Cross Roads (2014) appeared first on MotorcycleSpecifications.com.

]]>