Cagiva Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 21:05:29 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Cagiva Mito 125 (1991) https://motorcyclespecifications.com/cagiva-mito-125-1991-specs/ Fri, 07 Apr 2023 12:03:59 +0000 https://motorcyclespecifications.com/?p=48247 The Cagiva Mito I is a 1991 motorcycle model with a two-stroke, single-cylinder engine and an electric variable power read valve. It has a capacity of 125.6 cc and a

The post Cagiva Mito 125 (1991) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito I is a 1991 motorcycle model with a two-stroke, single-cylinder engine and an electric variable power read valve. It has a capacity of 125.6 cc and a compression ratio of 13.0:1, and is powered by a 28mm Dell’Orto flat slide carburetor and CDI ignition with kick starting. The bike can reach a maximum power of 33.5 hp at 10,500 rpm and a maximum torque of 19 Nm at 9,000 rpm. Its transmission is a 7-speed with a chain final drive. The front suspension is USD telescopic forks and the rear suspension is a swinging arm single shock. It has a single 320mm disc 4-piston caliper front brake and a single 230mm disc 1-piston caliper rear brake, with a front tyre size of 110/70-17 and a rear tyre size of 150/70-17. The bike has a dry weight of 117 kg and a wet weight of 125 kg, with a fuel capacity of 12.8 litres. Braking distances for the bike at 60-0 and 100-0 km/h are 13.1 metres and 37.0 metres respectively, and its standing 1/4 mile time is 14.0 seconds with a top speed of 164.2 km/h. The bike was road-tested by Motosprint in 1990.

Technical specifications:

Make Model: Cagiva Mito I

Year: 1991
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h / 102 mph
Road Test: Motosprint 1990

The post Cagiva Mito 125 (1991) appeared first on MotorcycleSpecifications.com.

]]> Cagiva 650 elefant (1987-89) https://motorcyclespecifications.com/cagiva-650-elefant-1987-89-specs/ Fri, 07 Apr 2023 10:57:03 +0000 https://motorcyclespecifications.com/?p=48184 The Cagiva Elefant 650 is a motorcycle that was produced from 1987 to 1989. It has a four-stroke, 90-degree L-twin cylinder engine with SOHC and desmodromic 2 valve per cylinder.

The post Cagiva 650 elefant (1987-89) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 650 is a motorcycle that was produced from 1987 to 1989. It has a four-stroke, 90-degree L-twin cylinder engine with SOHC and desmodromic 2 valve per cylinder. The engine capacity is 649cc with a bore x stroke of 82 x 61 mm. The motorcycle is air cooled with a compression ratio of 10.0:1. It has 2x 36mm Dell’Orto carburetors and an inductive magnetically triggered ignition. The electric starting system produces a maximum power of 54 hp / 40 kW @ 8400 rpm and a maximum torque of 54 Nm / 39.8 lb-ft @ 6200 rpm. The gearbox has 5-speed and the final drive is a chain. The front suspension is air adjustable forks with 42mm tubes and a front wheel travel of 220 mm / 8.6 in. The rear suspension is single shock absorber and adjustable for spring preload. The front brake system has a single 260mm disc with 4 piston caliper, while the rear brake system uses a single 240mm disc with 2 piston caliper. The motorcycle has a front tire size of 90/90-21 and a rear tire size of 130/90-17. The wheelbase is 1520 mm / 59.8 in and the seat height is 905 mm / 35.6 in. It has a dry weight of 191 kg / 421 lbs and a wet weight of 208 kg / 458.6 lbs. The fuel capacity is 17.5 liters / 4.6 US gal and the average consumption is 38 mpg. The braking distance of 60-0 / 100-0 is unknown, and the standing 1/4 mile time is 13.6 sec @152.8 km/h. The top speed is 179 km/h.

Technical specifications:

Make Model: Cagiva Elefant 650

Year: 1987 – 89
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder.
Capacity: 649 cc / 39.6 cu-in
Bore x Stroke: 82 x 61 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: 2x 36mm Dell’Orto carburetors
Ignition: Inductive magnetically triggered
Starting: Electric
Max Power: 54 hp / 40 kW @ 8400 rpm
Max Torque: 54 Nm / 39.8 lb-ft @ 6200 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Air adjustable forks 42mm tubes
Front Wheel Travel: 220 mm / 8.6 in
Rear Suspension: Single shock absorber. adjustable for spring preload
Front Brakes: Single 260mm disc 4 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 90/90-21
Rear Tyre: 130/90-17
Wheelbase: 1520 mm / 59.8 in
Seat Height: 905 mm / 35.6 in
Dry Weight: 191 kg / 421 lbs
Wet Weight: 208 kg / 458.6 lbs
Fuel Capacity: 17.5 Litres / 4.6 US gal
Consumption Average: 38 mpg
Braking 60 – 0 / 100 – 0: – / 41.5 m
Standing 1/4 Mile: 13.6 sec 152.8 km/h
Top Speed: 179 km/h

The post Cagiva 650 elefant (1987-89) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Elefant 200 (1985-86) https://motorcyclespecifications.com/cagiva-elefant-200-1985-86-specs/ Fri, 07 Apr 2023 10:50:56 +0000 https://motorcyclespecifications.com/?p=48179 The Cagiva Elefant 200 was a two-stroke, single-cylinder motorcycle produced in 1985-86. It had a liquid-cooled engine with a capacity of 190 cc and a compression ratio of 11.9:1. The

The post Cagiva Elefant 200 (1985-86) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 200 was a two-stroke, single-cylinder motorcycle produced in 1985-86. It had a liquid-cooled engine with a capacity of 190 cc and a compression ratio of 11.9:1. The bike had both kick and electric starting, and could produce a maximum power of 27 horsepower at 9000 rpm and a maximum torque of 21 Nm at 7500 rpm. It had a six-speed transmission and a chain final drive. The chassis was a tubular duplex cradle design, with telescopic forks in the front and an alloy single shock soft damp suspension in the rear. It had a single 240mm disc brake in the front and a 130mm drum brake in the rear. The front and rear tyres measured 3.00-21 and 4.60-17 respectively. The bike weighed 125 kg and had a fuel capacity of 15.5 litres or approximately 4.0 US gallons.

Technical specifications:

Make Model: Cagiva Elefant 200

Year: 1985 – 86
Engine: Two stroke, single cylinder
Capacity: 190 cc / 11.6 cu-in
Bore x Stroke: 67 x 54 mm
Cooling System: Liquid cooled
Compression Ratio: 11.9:1
Induction: Single Dell’Orto premix
Ignition: Electronic
Starting: Kick & Electric
Max Power: 27 hp / 19.7 @ 9000 rpm
Max Torque: 21 Nm / 15.4 lb-ft @ 7500 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular duplex cradle
Front Suspension: Telescopic forks
Rear Suspension: Alloy single shock soft damp
Front Brakes: Single 240mm disc
Rear Brakes: 130mm Drum
Front Tyre: 3.00-21
Rear Tyre: 4.60-17
Dry Weight: 125 kg / 275.5 lbs
Fuel Capacity: 15.5 Litres / 4.0 US gal

The post Cagiva Elefant 200 (1985-86) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Freccia 125 C10R Anniversary (1988) https://motorcyclespecifications.com/cagiva-freccia-125-c10r-anniversary-1988-specs/ Fri, 07 Apr 2023 10:02:59 +0000 https://motorcyclespecifications.com/?p=48132 The Cagiva Freccia 125 C10R Anniversary is a motorcycle model from 1988 that features a two-stroke, single cylinder engine with a capacity of 125 cc. It has a liquid cooling

The post Cagiva Freccia 125 C10R Anniversary (1988) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Freccia 125 C10R Anniversary is a motorcycle model from 1988 that features a two-stroke, single cylinder engine with a capacity of 125 cc. It has a liquid cooling system with a compression ratio of 13.0:1 and uses a 28mm Dell’Orto premix carburetor for induction. The bike has a maximum power output of 27 hp at 10500 rpm and a maximum torque of 20 Nm at 8250 rpm. It has a 7-speed transmission and a chain final drive, with front and rear suspension provided by Marzocchi telescopic fork and monoshock, respectively. The front and rear brakes are single Brembo discs, and the bike runs on 100/80-16 front and 130/80-17 rear tires. The bike has a dry weight of 128 kg, can carry up to 16 liters (4.2 US gal) of fuel, and has an average fuel consumption of 19.8 km/lit. The bike can brake from 60-0 km/h in 13.5 meters and from 100-0 km/h in 41.1 meters. Its standing 1/4 mile time is 15.4 seconds at 135.8 km/h, and it has a top speed of 163.7 km/h.

Technical specifications:

Make Model: Cagiva Freccia 125 C10R Anniversary

Year: 1988
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Cooling System: Liquid cooled
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto premix carburetor
Ignition: CDI
Starting: Electric
Max Power: 27 hp / 19.9 kW @ 10500 rpm
Max Power Rear Tyre: 24.1 hp @ 10500 rpm
Max Torque: 20 Nm / 14.7 lb-ft @ 8250 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: Marzocchi telescopic, adjustable anti-dive
Rear Suspension: Marzocchi monoshock
Front Brakes: Single 260mm Brembo disc
Rear Brakes: Single 240mm Brembo disc
Front Tyre: 100/80-16
Rear Tyre: 130/80-17
Dry Weight: 128 kg / 282 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 19.8 km/lit
Braking 60 – 0 / 100 – 0: 13.5 m / 41.1 m
Standing 1/4 Mile: 15.4 sec / 135.8 km/h
Top Speed: 163.7 km/h

The post Cagiva Freccia 125 C10R Anniversary (1988) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Elefant 125 (1990) https://motorcyclespecifications.com/cagiva-elefant-125-1990-specs/ Fri, 07 Apr 2023 09:52:56 +0000 https://motorcyclespecifications.com/?p=48122 The Cagiva Elefant 125 Lucky Explorer is a two-stroke, single cylinder motorcycle manufactured in 1990. It has a 125cc capacity engine with a compression ratio of 12.9:1, and is equipped

The post Cagiva Elefant 125 (1990) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 125 Lucky Explorer is a two-stroke, single cylinder motorcycle manufactured in 1990. It has a 125cc capacity engine with a compression ratio of 12.9:1, and is equipped with a single Dell’Orto premix carburetor and electronic ignition. The maximum power output is 23.6 hp / 17.5 kW at 9100 rpm, with a maximum torque of 1.8 kgf-m at 8000 rpm. The transmission has 6 speeds, and the final drive is through a chain. The front suspension consists of telescopic forks, while the rear suspension is a swinging arm single shock. The front brakes use a single 240mm disc, and the rear brakes use a single 130mm drum. The front and rear tyres are 2.75-21 and 4.60-17, respectively. The dry weight of the bike is not specified, nor is the fuel capacity.

Technical specifications:

Make Model: Cagiva Elefant 125 Lucky Explorer

Year: 1990 –
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 12.9:1
Induction: Single Dell’Orto premixcarburetor
Ignition: Electronic
Starting: Kick
Max Power: 23.6 hp / 17.5 kW @ 9100 rpm
Max Torque: 1.8 kgf-m @ 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 240mm disc
Rear Brakes: Single 130mm drum
Front Tyre: 2.75-21
Rear Tyre: 4.60-17
Dry Weight:
Fuel Capacity:

The post Cagiva Elefant 125 (1990) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125 II Evoluziono Limited Edition (1994) https://motorcyclespecifications.com/cagiva-mito-125-ii-evoluziono-limited-edition-1994-specs/ Fri, 07 Apr 2023 04:29:01 +0000 https://motorcyclespecifications.com/?p=47823 The Cagiva Mito 125 II Evoluziono Limited Edition is a rare motorcycle with only 100 units produced in 1994. It has a two-stroke, single-cylinder engine with a capacity of 125.6

The post Cagiva Mito 125 II Evoluziono Limited Edition (1994) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 II Evoluziono Limited Edition is a rare motorcycle with only 100 units produced in 1994. It has a two-stroke, single-cylinder engine with a capacity of 125.6 cc and a compression ratio of 13.0:1. The bike has a 28mm Dell’Orto flat slide carburetor for induction and CDI for ignition. It can produce a maximum power of 33.5 hp at 10500 rpm and a maximum torque of 19 Nm at 9000 rpm. The transmission has seven speeds, and the final drive is through a chain. The bike has USD telescopic forks for the front suspension and a swinging arm single shock for the rear suspension. Braking is through a single 320mm disc with a four-piston caliper for the front and a single 230mm disc with a one-piston caliper for the rear. The bike has a dry weight of 117 kg and a fuel capacity of 12.8 litres. It can go from 0 to 60 km/h in 13.1 m and from 0 to 100 km/h in 37.0 m. The standing quarter-mile time for the bike is 14.0 seconds, and its top speed is 164.2 km/h.

Technical specifications:

Make Model: Cagiva Mito 125 II Evoluziono Limited Edition

Year: 1994
Production: 100 Units
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h

The post Cagiva Mito 125 II Evoluziono Limited Edition (1994) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Elefant 350 (1985-86) https://motorcyclespecifications.com/cagiva-elefant-350-1985-86-specs/ Fri, 07 Apr 2023 01:28:10 +0000 https://motorcyclespecifications.com/?p=47655 The Cagiva Elefant 350 is a motorcycle that was produced between 1985 and 1986. It has a four-stroke, 90-degree L twin-cylinder, SOHC, desmodromic 2 valve per cylinder engine with a

The post Cagiva Elefant 350 (1985-86) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 350 is a motorcycle that was produced between 1985 and 1986. It has a four-stroke, 90-degree L twin-cylinder, SOHC, desmodromic 2 valve per cylinder engine with a capacity of 349 cc and a bore x stroke of 66 x 51 mm. The bike has an air-cooled cooling system and a compression ratio of 10.3:1. It uses 2x Dell’Orto carburetors for induction and has electronic ignition. The motorcycle has both electric and kick starting options. It can produce a maximum power of 34.5 hp / 25.4 kW @ 8000 rpm (rear tyre 30.6 hp @ 8800 rpm) and a maximum torque of 30 Nm / 22.1 lb-ft @ 8000 rpm. It comes with a 5-speed transmission and a chain final drive. The front suspension is telescopic forks, and the rear suspension is an alloy swing arm single shock. The front and rear brakes are single discs. The motorcycle has a seat height of 905 mm / 35.6 in, a dry weight of 190 kg / 418.8 lbs, and an 18-litre / 4.7 US gal fuel capacity. It has an average consumption of 18 km/lit and a top speed of 145.1 km/h. The bike can brake from 60-0 km/h in 15.4 meters and from 100-0 km/h in 44.9 meters. The standing 1/4 mile time is 15.5 seconds, and the bike can reach a speed of 126.3 km/h.

Technical specifications:

Make Model: Cagiva Elefant 350

Year: 1985 – 86
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder.
Capacity: 349 cc / 21.2 cu-in
Bore x Stroke: 66 x 51 mm
Cooling System: Air cooled
Compression Ratio: 10.3:1
Induction: 2x Dell’Orto carburetors
Ignition: Electronic
Starting: Electric & kick
Max Power: 34.5 hp / 25.4 kW @ 8000 rpm (rear tyre 30.6 hp @ 8800 rpm)
Max Torque: 30 Nm / 22.1 lb-ft @ 8000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swing arm single shock
Front Brakes: Single disc
Rear Brakes: Single disc
Front Tyre: 3.00-21
Rear Tyre: 4.60-17
Wheelbase: 1520 mm / 59.8 in
Seat Height: 905 mm / 35.6 in
Dry Weight: 190 kg / 418.8 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Consumption Average: 18 km/lit
Braking 60 – 0 / 100 – 0: 15.4 m / 44.9 m
Standing 1/4 Mile: 15.5 sec / 126.3 km/h
Top Speed: 145.1 km/h

The post Cagiva Elefant 350 (1985-86) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Custom Blue 125 (1988) https://motorcyclespecifications.com/cagiva-custom-blue-125-1988-specs/ Fri, 07 Apr 2023 01:05:57 +0000 https://motorcyclespecifications.com/?p=47635 The Cagiva Custom Blue 125 is a motorcycle from 1988 with a two-stroke, single cylinder engine and a capacity of 125 cc. Its compression ratio is 13.0:1 and the bike

The post Cagiva Custom Blue 125 (1988) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Custom Blue 125 is a motorcycle from 1988 with a two-stroke, single cylinder engine and a capacity of 125 cc. Its compression ratio is 13.0:1 and the bike runs on a single Dell’Orto premix carburetor. It has an electronic ignition system and is started by kick. The engine delivers a maximum power of 23.6 hp / 17.5 kW and torque of 1.8 kgf-m at 8000 rpm. The bike has a 6 speed transmission and chain final drive. The frame is a tubular duplex cradle and comes with telescopic forks and swinging arm with single shock for front and rear suspensions respectively. The front brake is a single 240mm disc, while the rear is a drum brake. The bike features a 3.25 -19 front tire and a 5.10 -17 rear tire. The dry weight of the bike is 125 kg / 275.5 lbs, and it has a fuel capacity of 14 Litres / 3.7 US gal.

Technical specifications:

Make Model: Cagiva Custom Blue 125

Year: 1988
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: Single Dell’Orto premix carburetor
Ignition: Electronic
Starting: Kick
Max Power: 23.6 hp / 17.5 kW @ 9100 rpm
Max Torque: 1.8 kgf-m @ 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular duplex cradle
Front Suspension: Telescopic forks
Rear Suspension: Swinging arm with single shock
Front Brakes: Single 240mm disc
Rear Brakes: Drum
Front Tyre: 3.25 -19
Rear Tyre: 5.10 -17
Dry Weight: 125 kg / 275.5 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Cagiva Custom Blue 125 (1988) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Raptor 1000 Elefantino Rosso (2003) https://motorcyclespecifications.com/cagiva-raptor-1000-elefantino-rosso-2003-specs/ Fri, 07 Apr 2023 00:17:56 +0000 https://motorcyclespecifications.com/?p=47592 The Cagiva Raptor 1000 Elefantino Rosso is a motorcycle produced in 2003. It features a four-stroke engine with a 996cc capacity, delivering a maximum power of 105.5 kW at 8500

The post Cagiva Raptor 1000 Elefantino Rosso (2003) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Raptor 1000 Elefantino Rosso is a motorcycle produced in 2003. It features a four-stroke engine with a 996cc capacity, delivering a maximum power of 105.5 kW at 8500 rpm and a maximum torque of 90.4 Nm at 7000 rpm. The engine is cooled by a liquid cooling system and has an electronic fuel injection induction with a CDI ignition. The motorcycle has a six-speed transmission and a chain final drive. The front suspension consists of a 43mm upside-down hydraulic fork, while the rear suspension is a rising rate monoshock preload adjustable system. The front brakes are two 298mm discs with four-piston calipers, and the rear brake is a single 220mm disc with a two-piston caliper. The motorcycle has a wheelbase of 1440mm and a seat height of 770mm, with a dry weight of 192kg and a fuel capacity of 15.2 litres. The average fuel consumption is 16.6 km/lit, and the motorcycle can reach a top speed of 232 km/h. It takes 11.1 seconds to cover a standing 1/4 mile with a speed of 208 km/h.

Technical specifications:

Make Model: Cagiva Raptor 1000 Elefantino Rosso

Year: 2003
Engine: Four stroke, 90 degrees V-twin, DOHC, 4 valves per cylinder (Suzuki DL100)
Capacity: 996 cc / 60.7 cu-in
Bore x Stroke: 11.3:1
Compression Ratio: 99 x 66 mm
Cooloing System: Liquid cooled
Induction: Electronic fuel injection
Ignition: CDI
Starting: Electric
Max Power: 105.5 / 78.7 kW @ 8500 rpm
Max Torque: 90.4 Nm / 66.4 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 43mm Upside down hydraulic fork
Rear Suspension: Rising rate monoshock preload adjustable
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1440 mm / 56.7 in
Seat Height: 770 mm / 30.3 in
Dry Weight: 192 kg / 423 lbs
Fuel Capacity: 15.2 Litres / 4.0 US gal
Consumption Average: 16.6 km/lit
Standing 1/4 Mile: 11.1 sec / 208 km/h
Top Speed: 232 km/h

The post Cagiva Raptor 1000 Elefantino Rosso (2003) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Cruiser 125 (1987) https://motorcyclespecifications.com/cagiva-cruiser-125-1987-specs/ Thu, 06 Apr 2023 20:57:14 +0000 https://motorcyclespecifications.com/?p=47415 The Cagiva Cruiser 125 was a motorcycle model released in 1987, featuring a two stroke, single cylinder engine with a capacity of 125cc. It had a compression ratio of 13.0:1

The post Cagiva Cruiser 125 (1987) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Cruiser 125 was a motorcycle model released in 1987, featuring a two stroke, single cylinder engine with a capacity of 125cc. It had a compression ratio of 13.0:1 and used a single Dell’Orto premix carburetor for induction, along with electronic ignition and a kick start. The maximum power output was 23.6 hp at 9100 rpm and the maximum torque was 1.8 kgf-m at 8000 rpm. The transmission was six-speed with a chain final drive. The front suspension used telescopic forks, while the rear suspension was a swingarm single shock. Brakes consisted of a single 240mm disc at the front and a single 220mm disc at the rear. The front and rear tires were 2.75-21 and 4.60-17, respectively. The dry weight of the motorcycle was 120kg, and the wet weight was 130kg. The fuel capacity was 14 litres, with an average consumption of 19.0 km/lit. Braking 60 – 0 and 100 – 0 took 13.9m and 43.0m, respectively. The standing 1/4 mile time was 16.2 sec with a top speed of 136.1 km/h.

Technical specifications:

Make Model: Cagiva Cruiser 125

Year: 1987
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: Single Dell’Orto premix carburetor
Ignition: Electronic
Starting: Kick
Max Power: 23.6 hp / 17.5 kW @ 9100 rpm
Max Torque: 1.8 kgf-m @ 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swingarm single shock
Front Brakes: Single 240mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 2.75-21
Rear Tyre: 4.60-17
Dry Weight: 120 kg / 264.5 lbs
Wet Weight: 130 kg / 286.6 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Consumption Average: 19.0 km/lit
Braking 60 – 0 / 100 – 0: 13.9 m / 43.0 m
Standing 1/4 Mile: 16.2 sec / 123.8 km/h
Top Speed: 136.1 km/h

The post Cagiva Cruiser 125 (1987) appeared first on MotorcycleSpecifications.com.

]]> Cagiva 600 River (1996-98) https://motorcyclespecifications.com/cagiva-600-river-1996-98-specs/ Thu, 06 Apr 2023 17:59:58 +0000 https://motorcyclespecifications.com/?p=47255 The Cagiva River 600, produced from 1996 to 1998, boasts a four-stroke, single-cylinder, SOHC, 4-valve engine with a capacity of 601.4 cc. The bike comes with front and rear suspension,

The post Cagiva 600 River (1996-98) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva River 600, produced from 1996 to 1998, boasts a four-stroke, single-cylinder, SOHC, 4-valve engine with a capacity of 601.4 cc. The bike comes with front and rear suspension, 140mm of wheel travel, and a 1390mm wheelbase. With a 160kg dry weight, 33hp maximum power, and 48.5Nm maximum torque, the bike can reach a top speed of 159.7 km/h. The front brake is a single 320mm disc with a two-piston caliper, while the rear brake is a 230mm disc with a two-piston caliper. The bike has a fuel capacity of 18 litres and can consume an average of 21 km/lit. In terms of performance, the bike can do a standing 1/4 mile in 14.8 seconds at 135.0 km/h, and can brake from 60-0 in 14.9 meters and 100-0 in 41.8 meters.

Technical specifications:

Make Model: Cagiva River 600

Year: 1996 – 98
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 601.4 cc / 36.6 cu-in
Bore x Stroke: 102 x 73.6 mm
Cooling System: Air/oil cooled
Compression Ratio:
Induction: 40mm Mikuni carburetor
Ignition: CDI
Starting: Electric
Max Power: 33 hp / 24.8 kW @ 5000 rpm
Max Torque: 48.5 Nm / 32.5 lb-ft @ 4500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 40mm Marzocchi forks
Front Wheel Travel: 150 mm / 5.9 in
Rear Wheel Travel: 140 mm / 5.5 in
Rear Suspension: Boge monoshock, preload adjustable, 140mm wheel travel
Front Brakes: Single 320mm disc 2 piston caliper
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 110/80-17
Rear Tyre: 140/70-17
Wheelbase: 1390 mm / 54.7 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 160 kg / 352.7 lbs
Wet Weight: 167 kg / 368 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Consumption average: 21 km/lit
Braking 60 – 0 / 100 – 0: 14.9 m / 41.8 m
Standing 1/4 Mile: 14.8 sec / 135.0 km/h
Top Speed: 159.7 km/h

The post Cagiva 600 River (1996-98) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Elefant 900 (1990-91) https://motorcyclespecifications.com/cagiva-elefant-900-1990-91-specs/ Thu, 06 Apr 2023 17:56:01 +0000 https://motorcyclespecifications.com/?p=47251 The Cagiva Elefant 900ie Lucky Explorer is a motorcycle produced from 1990 to 1991. It has a four-stroke, 90-degree L-twin cylinder engine with a capacity of 904cc, with air cooling

The post Cagiva Elefant 900 (1990-91) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 900ie Lucky Explorer is a motorcycle produced from 1990 to 1991. It has a four-stroke, 90-degree L-twin cylinder engine with a capacity of 904cc, with air cooling and a compression ratio of 9.2:1. The bike features Weber L.A.W fuel injection and Marelli electronic inductive discharge ignition. It has a top power output of 68hp at 8000 rpm, with a maximum torque of 78 Nm at 5250 rpm. The bike uses a dry multi-disc clutch and has a 5-speed transmission with a chain final drive. The frame is a double steel tubular cradle with a front suspension of 42.7mm Marzocchi clamped stanchion telescopic forks and a rear suspension of Ahlins Rising rate box monoshock adjustable for preload. The front brakes consist of a single 296mm disc, while the rear brakes feature a single 240mm disc with a 4 piston caliper. The bike has a fuel capacity of 24 litres or 6.3 US gallons and returns an average consumption of 17.5 km/lit. It has a 60-0/100-0 braking distance of 14.0 meters/40.6 meters and can reach a top speed of 190.2 km/h or 118 mph. A workshop manual is available for the 1990 900ie and 1991 900ie GT models, including EFI information. The bike was tested in the Motosprint Adventure Group Test in 1990.

Technical specifications:

Make Model: Cagiva Elefant 900ie Lucky Explorer

Year: 1990 – 91
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder
Capacity: 904 cc / 55.1 cu-in
Bore x Stroke: 92 x 68 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Weber L.A.W fuel injection
Ignition: Marelli electronic inductive discharge
Starting: Electric
Max Power: 68 hp / 49.6 kW @ 8000 rpm
Max Power Rear Tyre: 63.0 hp @ 7900 rpm
Max Torque: 78 Nm / 57.5 lb-ft @ 5250 rpm
Clutch: Dry Multi-disc
Transmission: 5 Speed
Final Drive: Chain
Frame: Double steel tubular cradle
Front Suspension: 42.7mm Marzocchi clamped stanchion telescopic forks non adjustable
Rear Suspension: ~Ahlins Rising rate box, monoshock adjustable for preload
Front Brakes: Single 296mm disc
Rear Brakes: Single 240mm disc 4 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 140/80-17
Dimensions: Length 2295 / 90.3 in Width 860 mm / 33.8 in Height 970 mm / 38.1 in
Wheelbase: 1570 mm / 61.8 in
Seat Height: 900 mm / 35.4 in
Ground Clearance: 260 mm / 10.2 in
Dry Weight: 189 kg / 416.6 lbs
Wet Weight: 208 kg / 458.5 lbs
Fuel Capacity: 24 Litres / 6.3 US gal
Consumption average: 17.5 km/lit
Braking 60 – 0 / 100 – 0: 14.0 m / 40.6 m
Standing 1/4 Mile: 12.8 sec / 160.9 km/h
Top Speed: 190.2 km/h / 118 mph
Road Test: Motosprint Adventure Group Test 1990
Manual: 1990 900ie Work Shop Manual / 1991 900ie GT Work Shop Manual / EFI information

The post Cagiva Elefant 900 (1990-91) appeared first on MotorcycleSpecifications.com.

]]> Cagiva 125 Mito Evoluziono (1992) https://motorcyclespecifications.com/cagiva-125-mito-evoluziono-1992-specs-2/ Thu, 06 Apr 2023 15:43:06 +0000 https://motorcyclespecifications.com/?p=47133 The Cagiva Mito 125 II is a motorcycle that was produced in 1992 with a two-stroke, single-cylinder engine, and a capacity of 125.6 cc. It has a compression ratio of

The post Cagiva 125 Mito Evoluziono (1992) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 II is a motorcycle that was produced in 1992 with a two-stroke, single-cylinder engine, and a capacity of 125.6 cc. It has a compression ratio of 13.0:1 and uses a 28mm Dell’Orto flat slide carburetor for induction. The bike delivers a max power of 33.5 hp at 10500 rpm and a max torque of 19 Nm at 9000 rpm. The transmission is a 7-speed system paired with a chain final drive. The front suspension has USD telescopic forks, while the rear suspension is a swinging arm single shock. For braking, the bike uses a single 320mm disc 4-piston caliper in the front and a single 230mm disc 1-piston caliper in the rear. The bike’s dry weight is 117 kg, while the wet weight is 125 kg, and it can hold 12.8 liters of fuel. The Cagiva Mito 125 II has a top speed of 164.2 km/h and can complete a standing quarter mile in 14.0 seconds at 148.9 km/h. The bike’s braking performances are impressive, with a stopping distance of 13.1 meters when braking from 60 to 0 km/h and 37.0 meters from 100 to 0 km/h.

Technical specifications:

Make Model: Cagiva Mito 125 II

Year: 1992
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h

The post Cagiva 125 Mito Evoluziono (1992) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Raptor 1000 (2004-05) https://motorcyclespecifications.com/cagiva-raptor-1000-2004-05-specs/ Thu, 06 Apr 2023 15:23:08 +0000 https://motorcyclespecifications.com/?p=47115 The Cagiva Raptor 1000 motorcycle was released from 2004 to 2005 and had a four-stroke, 90-degree V-twin engine with electronic fuel injection and a compression ratio of 11.3:1. The liquid-cooled

The post Cagiva Raptor 1000 (2004-05) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Raptor 1000 motorcycle was released from 2004 to 2005 and had a four-stroke, 90-degree V-twin engine with electronic fuel injection and a compression ratio of 11.3:1. The liquid-cooled bike had a maximum power output of 105.5 kW at 8500 rpm and a maximum torque of 90.4 Nm at 7000 rpm with a six-speed transmission and chain final drive. The front suspension was a 43mm upside-down hydraulic fork and the rear suspension was a rising rate monoshock preload adjustable. Front brakes consisted of two 298mm discs with four-piston calipers and the rear brakes had a single 220mm disc with a two-piston caliper. The wheelbase was 1440mm, the seat height 770mm, and the dry weight was 192kg with a fuel capacity of 15.2 liters. The bike had an average consumption of 16.6 km/lit, could reach a top speed of 232 km/h, and complete the standing 1/4 mile in 11.1 seconds at 208 km/h. Overall, the Cagiva Raptor 1000 was an impressive motorcycle with powerful performance capabilities.

Technical specifications:

Make Model: Cagiva Raptor 1000

Year: 2004 – 05
Engine: Four stroke, 90 degrees V-twin, DOHC, 4 valves per cylinder (Suzuki DL100)
Capacity: 996 cc / 60.7 cu-in
Bore x Stroke: 11.3:1
Compression Ratio: 99 x 66 mm
Cooloing System: Liquid cooled
Induction: Electronic fuel injection
Ignition: CDI
Starting: Electric
Max Power: 105.5 / 78.7 kW @ 8500 rpm
Max Torque: 90.4 Nm / 66.4 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 43mm Upside down hydraulic fork
Rear Suspension: Rising rate monoshock preload adjustable
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1440 mm / 56.7 in
Seat Height: 770 mm / 30.3 in
Dry Weight: 192 kg / 423 lbs
Fuel Capacity: 15.2 Litres / 4.0 US gal
Consumption Average: 16.6 km/lit
Standing 1/4 Mile: 11.1 sec / 208 km/h
Top Speed: 232 km/h

The post Cagiva Raptor 1000 (2004-05) appeared first on MotorcycleSpecifications.com.

]]> Cagiva W12 (1992) https://motorcyclespecifications.com/cagiva-w12-1992-specs/ Thu, 06 Apr 2023 14:39:11 +0000 https://motorcyclespecifications.com/?p=47072 The Cagiva W12 350 is a motorcycle that came out in 1992. It has a four-stroke, single-cylinder engine with SOHC and 4 valves. It has a capacity of 343.3 cc

The post Cagiva W12 (1992) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva W12 350 is a motorcycle that came out in 1992. It has a four-stroke, single-cylinder engine with SOHC and 4 valves. It has a capacity of 343.3 cc and a bore x stroke of 82 x 65 mm. The cooling system is air-cooled with a compression ratio of 9.5:1. The induction is a single Mikuni BST 34 carburetor, and the ignition is electronic CDI. The maximum power output is 28 hp / 19.7 kW @ 8500 rpm with max torque of 29.4 Nm / 21.7 lb-ft @ 5750 rpm. The transmission has 5 speeds, and the final drive is a chain. The front suspension is a hydraulic telescopic fork with 200mm wheel travel, while the rear suspension is a monoshock with 240mm wheel travel. The front and rear brakes are a single 260mm disc with 2-piston calipers and 220mm disc with 1-piston calipers, respectively. The tyres for the front and rear are 90/90-21 and 130/80-17. The dry weight for the motorcycle is 152 kg / 335 lbs, whereas wet weight is 157 kg / 346 lbs. It has a fuel capacity of 14 Litres / 3.7 US gal, and its consumption average is 19.3 km/lit. The braking 60-0 / 100-0 is 15.4 m / 43.9 m, while the standing 1/4 mile time is 15.2 seconds / 131.4 km/h, and its top speed is 147.3 km/h.

Technical specifications:

Make Model: Cagiva W12 350

Year: 1992
Engine: Four stroke, single cylinder. SOHC. . 4 valve
Capacity: 343.3 cc / 21.3 cu-in
Bore x Stroke: 82 x 65 mm
Cooling System: Air cooled
Compression Ratio: 9.5:1
Induction: Single Mikuni BST 34 carburetor
Ignition: Electronic CDI
Starting:
Max Power: 28 hp / 19.7 kW @ 8500 rpm
Max Torque: 29.4 Nm / 21.7 lb-ft @ 5750 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic telescopic fork, 200mm wheel travel
Rear Suspension: Monoshock, 240mm wheel travel
Front Brakes: Single 260mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dry Weight: 152 kg / 335 lbs
Wet Weight: 157 kg / 346 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Consumption average: 19.3 km/lit
Braking 60 – 0 / 100 – 0: 15.4 m / 43.9 m
Standing 1/4 Mile: 15.2 sec / 131.4 km/h
Top Speed: 147.3 km/h

The post Cagiva W12 (1992) appeared first on MotorcycleSpecifications.com.

]]> Cagiva 650 elefant (1985-86) https://motorcyclespecifications.com/cagiva-650-elefant-1985-86-specs/ Thu, 06 Apr 2023 09:02:20 +0000 https://motorcyclespecifications.com/?p=46765 The Cagiva Elefant 650 motorcycle was produced from 1985-86 and has a four-stroke, 90-degree L twin cylinder, SOHC, desmodromic 2 valve per cylinder engine with a 649cc capacity. It has

The post Cagiva 650 elefant (1985-86) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 650 motorcycle was produced from 1985-86 and has a four-stroke, 90-degree L twin cylinder, SOHC, desmodromic 2 valve per cylinder engine with a 649cc capacity. It has a compression ratio of 10.0:1 and is air-cooled. The bike has 2x 36mm Dell’Orto carburetors for induction and is ignition-inductive magnetically triggered. The maximum power is 54 hp/40 kW @ 8400 rpm with 54 Nm/39.8 lb-ft @ 6200 rpm for maximum torque. It has five-speed transmission and the final drive is chain. The Cagiva Elefant 650 has air adjustable 42mm tube forks for the front suspension and a single shock absorber adjustable for spring preload for the rear suspension. The front brakes are a single 260mm disc with a 4 piston caliper and the rear brakes are a single 240mm disc with a 2 piston caliper. The tires are 90/90-21 for the front and 130/90-17 for the rear with a wheelbase of 1520mm/59.8in and seat height of 905mm/35.6in. The dry weight is 191kg/421lbs and the wet weight is 208kg/458.6lbs. The fuel capacity is 17.5 liters/4.6 US gallons with an average consumption of 38 mpg. The braking, 60-0/100-0, is not listed, and the standing 1/4 mile is 13.6 seconds at 152.8km/h. The top speed is 179km/h.

Technical specifications:

Make Model: Cagiva Elefant 650

Year: 1985 – 86
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder.
Capacity: 649 cc / 39.6 cu-in
Bore x Stroke: 82 x 61 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: 2x 36mm Dell’Orto carburetors
Ignition: Inductive magnetically triggered
Starting: Electric
Max Power: 54 hp / 40 kW @ 8400 rpm
Max Torque: 54 Nm / 39.8 lb-ft @ 6200 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Air adjustable forks 42mm tubes
Front Wheel Travel: 220 mm / 8.6 in
Rear Suspension: Single shock absorber. adjustable for spring preload
Front Brakes: Single 260mm disc 4 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 90/90-21
Rear Tyre: 130/90-17
Wheelbase: 1520 mm / 59.8 in
Seat Height: 905 mm / 35.6 in
Dry Weight: 191 kg / 421 lbs
Wet Weight: 208 kg / 458.6 lbs
Fuel Capacity: 17.5 Litres / 4.6 US gal
Consumption Average: 38 mpg
Braking 60 – 0 / 100 – 0: – / 41.5 m
Standing 1/4 Mile: 13.6 sec 152.8 km/h
Top Speed: 179 km/h

The post Cagiva 650 elefant (1985-86) appeared first on MotorcycleSpecifications.com.

]]> Cagiva SXT 125 Ala Rossa (1982-83) https://motorcyclespecifications.com/cagiva-sxt-125-ala-rossa-1982-83-specs/ Thu, 06 Apr 2023 08:56:03 +0000 https://motorcyclespecifications.com/?p=46759 The Cagiva SXT 125 Ala Rossa is a motorcycle model that was produced between 1982 and 1983. It is powered by a two-stroke, single-cylinder engine with a capacity of 123cc

The post Cagiva SXT 125 Ala Rossa (1982-83) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva SXT 125 Ala Rossa is a motorcycle model that was produced between 1982 and 1983. It is powered by a two-stroke, single-cylinder engine with a capacity of 123cc and a compression ratio of 14.8:1. The engine is air-cooled and is lubricated by a fuel and oil mixture. The bike has a D24mm ell’Orto VHB 27 AD induction system and an ignition system. The maximum power output is 17 horsepower at 7000 rpm. The bike is equipped with a wet, multi-plate clutch and a 5-speed transmission with a final chain drive. The front suspension consists of a pivoted fork, while the rear suspension is a soft damp single shock. The bike has a single 240mm disc front brake and a drum rear brake. The front tyre is 2.75-21 and the rear tyre is 3.50-18. The wheelbase of the bike is 1359mm, with a seat height of 749mm and a dry weight of 112kg. Finally, the bike has a fuel capacity of 9 litres or 2.3 US gallons.

Technical specifications:

Make Model: Cagiva SXT 125 Ala Rossa

Year: 1982 – 83
Engine: Two stroke, single cylinder
Capacity: 123 cc / 7.6 cu-in
Bore x Stroke: 56.0 x 50 mm
Cooling System: Air cooled
Compression Ratio: 14.8;1
Lubrication: Fuel and oil mixture
Induction: D24mm ell’Orto VHB 27 AD
Ignition:
Starting: Primary kick
Max Power: 17 hp / 12.4 kW @ 7000 rpm
Clutch: Wet, multi plate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Pivoted fork
Rear Suspension: Soft damp single shock
Front Brakes: Single 240mm disc
Rear Brakes: Drum
Front Tyre: 2.75 -21
Rear Tyre: 3.50 -18
Wheelbase: 1359 mm 53.5 in
Seat Height: 749 mm / 29.5 in
Dry Weight: 112 kg / 247 lbs
Fuel Capacity: 9 Litres / 2.3 US gal

The post Cagiva SXT 125 Ala Rossa (1982-83) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125SP II Sport Production Lucky Explorer (1992-93) https://motorcyclespecifications.com/cagiva-mito-125sp-ii-sport-production-lucky-explorer-1992-93-specs/ Thu, 06 Apr 2023 07:47:59 +0000 https://motorcyclespecifications.com/?p=46701 The Cagiva Mito 125SP II Sport Production Lucky Explorer was a motorcycle produced in 1992-93. It had a two-stroke, single-cylinder engine with a capacity of 125.6cc and electric variable power

The post Cagiva Mito 125SP II Sport Production Lucky Explorer (1992-93) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125SP II Sport Production Lucky Explorer was a motorcycle produced in 1992-93. It had a two-stroke, single-cylinder engine with a capacity of 125.6cc and electric variable power read valve. The compression ratio was 13.0:1 and it had a 28mm Dell’Orto flat slide carburetor. The bike had a maximum power of 33.5 hp and maximum torque of 19 Nm. It had a 7-speed transmission and chain final drive. The front suspension was a USD telescopic fork and the rear suspension was a swinging arm single shock. The front brakes had a single 320mm disc with a 4-piston caliper and the rear brakes had a single 230mm disc with a 1-piston caliper. The dry weight of the bike was 117kg, and it had a fuel capacity of 12.8 litres. When braking at 60-0/100-0, it had a distance of 13.1m/37.0m and it could reach a top speed of 164.2 km/h.

Technical specifications:

Make Model: Cagiva Mito 125SP II Sport Production Lucky Explorer

Year: 1992 – 93
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h

The post Cagiva Mito 125SP II Sport Production Lucky Explorer (1992-93) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Gran Canyon 900 (1997-98) https://motorcyclespecifications.com/cagiva-gran-canyon-900-1997-98-specs/ Thu, 06 Apr 2023 01:39:11 +0000 https://motorcyclespecifications.com/?p=46370 The Cagiva Gran Canyon 900ie is a motorcycle produced in 1997-98. It has a four-stroke, 90-degree L twin-cylinder engine with a capacity of 904cc. The bike features Weber fuel injection

The post Cagiva Gran Canyon 900 (1997-98) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Gran Canyon 900ie is a motorcycle produced in 1997-98. It has a four-stroke, 90-degree L twin-cylinder engine with a capacity of 904cc. The bike features Weber fuel injection and Marelli electronic inductive discharge ignition. The maximum power is 73 hp at 7100 rpm and the maximum torque is 78 Nm at 5000 rpm. The bike also has a six-speed transmission, a wet, multiple-disc clutch, and a chain final drive. Its frame is made of high-tensile steel and has a single tube cradle. The wheelbase is 1530 mm and the seat height is 850 mm. The front suspension is a 45mm telescopic hydraulic fork while the rear suspension is a progressive soft damp with a hydraulic single shock absorber. It has dual disc front brakes and a single disc rear brake. The motorcycle has a fuel capacity of 20 litres and a wet weight of 224 kg. Its maximum speed is 191 km/h and it can go from 0-100 km/h in 12.8 seconds. The average fuel consumption is 15.8 km/lit and the braking distance from 60-0 km/h is 12.9 meters. The standing quarter-mile time is 12.8 seconds at 164.9 km/h.

Technical specifications:

Make Model: Cagiva Gran Canyon 900ie

Year: 1997 – 98
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder.
Capacity: 904 cc / 55.1 cu-in
Bore x Stroke: 92 x 68 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
: Wet sump
Induction: Weber fuel injection
Ignition: Marelli electronic inductive discharge
Starting: Electric
Max Power: 73 hp / 66.7 hp @ 7100 rpm
Max Power Rear Ttre: 66.6 hp @ 7100 rpm
Max Torque: 78 Nm / 57.5 lb-ft @ 5000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: High-tensile steel rectangular, single tube cradle
Front Suspension: 45mm Telescopic hydraulic fork with advanced axle
Rear Suspension: Progressive Soft Damp with hydraulic single shock absorber
Front Brakes: 2x 296mm discs 2 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 100/90 R19
Rear Tyre: 150/70 R17
Wheelbase: 1530 mm / 60.2 in
Seat Height: 850 mm / 38.4 in
Ground Clearance: 190 mm / 7.4 in
Dry Weight: 216 kg / 476 lbs
Wet Weight: 224 kg / 493 lbs
Fuel Capacity: 20 Litres / 5.2 US gal
Consumption Average: 15.8 km/lit
Braking 60 – 0 / 100 – 0: 12.9 m / 40.4 m
Standing 1/4 Mile: 12.8 sec / 164.9 km/h
Top Speed: 191 km/h

The post Cagiva Gran Canyon 900 (1997-98) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125 Special Editions (1999) https://motorcyclespecifications.com/cagiva-mito-125-special-editions-1999-specs/ Thu, 06 Apr 2023 01:13:00 +0000 https://motorcyclespecifications.com/?p=46344 The Cagiva Mito 125 Special Editions motorcycle was released in 1999 and featured a two-stroke, single-cylinder engine with a 125.6 cc capacity, producing a maximum power of 34 hp at

The post Cagiva Mito 125 Special Editions (1999) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 Special Editions motorcycle was released in 1999 and featured a two-stroke, single-cylinder engine with a 125.6 cc capacity, producing a maximum power of 34 hp at 12000 rpm and a maximum torque of 23 Nm at 11000 rpm. The engine also had an electric variable power read valve and a Dell’Orto carburetor. The bike had a liquid-cooled cooling system, CDI ignition, and a wet, multiple-disc, cable-operated clutch. It had a 6-speed transmission and a chain final drive. The front suspension consisted of 40mm Marzocchi telescopic forks with 120 mm of wheel travel and the rear suspension was progressive with a hydraulically adjustable spring preload and 133 mm of wheel travel. Braking was provided by a single 320mm disc with a 4-piston caliper on the front and a single 230mm disc with a 2-piston caliper on the rear. The bike had front and rear ZR17 tires and weighed 129.0 kg with a fuel capacity of 14 liters. The bike had a ground clearance of 150 mm, a wheelbase of 1375 mm, and a seat height of 760 mm.

Technical specifications:

Make Model: Cagiva Mito 125 Special Editions

Year: 1999
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 6.3:1
Cooling System: Liquid cooled
Induction: Dell’Orto carb
Ignition: CDI
Starting: Electric
Max Power: 34 hp / 24.8 kW @ 12000 rpm
Max Torque: 23 Nm / 16.9 lb-ft @ 11000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 40mm Marzocchi telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Progressive with hydralyc shock, adjustable spring preload
Rear Wheel Travel: 133 mm / 5.2 in
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 110/70 ZR17
Rear Tyre: 150/60 ZR17
Dimensions: Height 1100 mm / 43.3 in Length 1980 mm / 78.0 in
Wheelbase: 1375 mm / 54.1 in
Seat Height: 760 mm / 29.9 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 129.0 kg / 284.4 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Cagiva Mito 125 Special Editions (1999) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Elefant 125 (1987-88) https://motorcyclespecifications.com/cagiva-elefant-125-1987-88-specs/ Thu, 06 Apr 2023 01:05:13 +0000 https://motorcyclespecifications.com/?p=46337 The Cagiva Elefant 125 motorcycle was produced between 1987-88 and had a two-stroke, single cylinder engine with a capacity of 125cc. It had a compression ratio of 12.9:1 and was

The post Cagiva Elefant 125 (1987-88) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 125 motorcycle was produced between 1987-88 and had a two-stroke, single cylinder engine with a capacity of 125cc. It had a compression ratio of 12.9:1 and was powered by a single Dell’Orto premix carburetor. The ignition was electronic and the motorcycle had a kick start. It could generate a maximum power of 23.6 hp at 9100 rpm and a maximum torque of 1.8 kgf-m at 8000 rpm. The transmission had six speeds and the final drive was chain-driven. The front suspension consisted of telescopic forks while the rear suspension was a swinging arm with a single shock. The motorcycle had a single 240mm disc brake for the front wheel and a single 130mm drum brake for the rear wheel. It had a 2.75-21 tyre at the front and a 4.60-17 tyre at the rear. The dry weight of the motorcycle was 125 kg and it had a fuel capacity of 14 litres or 3.7 US gallons.

Technical specifications:

Make Model: Cagiva Elefant 125

Year: 1987 – 88
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 12.9:1
Induction: Single Dell’Orto premixcarburetor
Ignition: Electronic
Starting: Kick
Max Power: 23.6 hp / 17.5 kW @ 9100 rpm
Max Torque: 1.8 kgf-m @ 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 240mm disc
Rear Brakes: Single 130mm drum
Front Tyre: 2.75-21
Rear Tyre: 4.60-17
Dry Weight: 125 kg
Fuel Capacity: 14 Litres / 3.7 US gal

The post Cagiva Elefant 125 (1987-88) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125 Evoluziono (2008) https://motorcyclespecifications.com/cagiva-mito-125-evoluziono-2008-specs/ Wed, 05 Apr 2023 23:40:11 +0000 https://motorcyclespecifications.com/?p=46259 The Cagiva Mito 125 Evoluziono is a two-stroke, single-cylinder motorcycle with a 125.6cc capacity and an electric variable power read valve. It is equipped with a Dell’Orto carburetor and CDI

The post Cagiva Mito 125 Evoluziono (2008) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 Evoluziono is a two-stroke, single-cylinder motorcycle with a 125.6cc capacity and an electric variable power read valve. It is equipped with a Dell’Orto carburetor and CDI ignition, as well as a wet clutch and a six-speed transmission with chain final drive. The bike has a maximum power output of 34hp at 12000 rpm and a maximum torque of 23Nm at 11000 rpm. It features 40mm Marzocchi telescopic forks in the front and a progressive hydraulic shock with adjustable spring preload in the rear, both providing a good wheel travel. The front brakes are a single 320mm disc with 4-piston calipers, while the rear brakes are a single 230mm disc with 2-piston calipers. The wheels come with ZR-rated tires, with a 110/70 ZR17 in the front and 150/60 ZR17 in the rear. The motorcycle is 1980mm long, 1100mm tall, and has a wheelbase of 1375mm. It has a dry weight of 129kg and a fuel capacity of 14 liters.

Technical specifications:

Make Model: Cagiva Mito 125

Year: 2008
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 6.3:1
Cooling System: Liquid cooled
Induction: Dell’Orto carb
Ignition: CDI
Starting: Electric
Max Power: 34 hp / 24.8 kW @ 12000 rpm
Max Torque: 23 Nm / 16.9 lb-ft @ 11000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 40mm Marzocchi telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Progressive with hydralyc shock, adjustable spring preload
Rear Wheel Travel: 133 mm / 5.2 in
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 110/70 ZR17
Rear Tyre: 150/60 ZR17
Dimensions: Height 1100 mm / 43.3 in Length 1980 mm / 78.0 in
Wheelbase: 1375 mm / 54.1 in
Seat Height: 760 mm / 29.9 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 129.0 kg / 284.4 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Cagiva Mito 125 Evoluziono (2008) appeared first on MotorcycleSpecifications.com.

]]> Cagiva 125 Freccia C12 R (1992) https://motorcyclespecifications.com/cagiva-125-freccia-c12-r-1992-specs/ Wed, 05 Apr 2023 22:51:03 +0000 https://motorcyclespecifications.com/?p=46215 The Cagiva 125 Freccia C12 R (1992) motorcycle is a two-stroke, single-cylinder bike with a displacement of 125cc. It has a liquid cooling system with a compression ratio of 13.0:1

The post Cagiva 125 Freccia C12 R (1992) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva 125 Freccia C12 R (1992) motorcycle is a two-stroke, single-cylinder bike with a displacement of 125cc. It has a liquid cooling system with a compression ratio of 13.0:1 and a 28mm Dell’Orto premix carburetor. The CDI ignition and electric starting system provide ample power to the rear tire, with a maximum output of 28.8 horsepower at 10100rpm and 20 Nm of torque at 10100rpm. A seven-speed transmission and chain final drive complete the powertrain. The bike is outfitted with Marzocchi telescopic front suspension with adjustable anti-dive and rear suspension with a monoshock system. Front and rear brakes include a single 298mm disc 4-piston caliper and a single 240mm disc 1-piston caliper, respectively. The bike weighs 132kg when wet and has a fuel capacity of 16 liters. It has an average fuel consumption of 19.4 km per liter and can brake from 60-0 in 13.4m and 100-0 in 39.5m. The bike can complete a standing quarter-mile in 15 seconds and has a top speed of 165.9 km/h.

Technical specifications:

Make Model: Cagiva 125 C12R Final Edition

Year: 1992
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Cooling System: Liquid cooled
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto premix carburetor
Ignition: CDI
Starting: Electric
Max Power Rear Tyre: 28.8 hp / 21.4 kW @ 10100 rpm)
Max Torque: 20 Nm / 14.7 lb-ft @ 10100 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: Marzocchi telescopic, adjustable anti-dive
Rear Suspension: Marzocchi monoshock
Front Brakes: Single 298mm disc 4 piston caliper
Rear Brakes: Single 240mm disc 1 piston caliper
Front Tyre: 100/80-16
Rear Tyre: 120/80-17
Dry Weight: 125 kg / 275.5 Llbs
Wet Weight: 132 kg / 291 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption average: 19.4 km/lit
Braking 60 – 0 / 100 – 0: 13.4 m / 39.5 m
Standing 1/4 Mile: 15.0 sec / 140.3 km/h
Top Speed: 165.9 km/h

The post Cagiva 125 Freccia C12 R (1992) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125  2 (1995) https://motorcyclespecifications.com/cagiva-mito-125-2-1995-specs/ Wed, 05 Apr 2023 20:37:06 +0000 https://motorcyclespecifications.com/?p=46090 The Cagiva Mito 125 Evoluziono motorcycle was released in 1995 with a two stroke, single cylinder engine and electric variable power read valve. It has a capacity of 125.6 cc

The post Cagiva Mito 125  2 (1995) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 Evoluziono motorcycle was released in 1995 with a two stroke, single cylinder engine and electric variable power read valve. It has a capacity of 125.6 cc and a compression ratio of 6.3:1. The bike is liquid cooled and has a Dell’Orto carb for induction with CDI ignition and electric starting. It has a maximum power of 34 hp at 12000 rpm and a maximum torque of 23 Nm at 11000 rpm. The clutch is wet, multiple discs and cable operated with a 7 speed transmission and chain final drive. For suspension, it has 40mm Marzocchi telescopic forks at the front and a progressive hydraulic shock with adjustable spring preload at the rear. The front brakes consist of a single 320mm disc and 4 piston caliper while the rear brakes have a single 230mm disc and 2 piston caliper. The bike has a seat height of 760 mm, a ground clearance of 150 mm and dry weight of 129.0 kg. The fuel capacity is 14 litres and the consumption average is 20.1 km/lit. The top speed of the bike is 172.3 km/h and it can go from 0 to 100 km/h in 14.2 seconds with a quarter mile standing at 149.3 km/h. The bike has been road tested and reviewed.

Technical specifications:

Make Model: Cagiva Mito 125 Evoluziono

Year: 1995
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 6.3:1
Cooling System: Liquid cooled
Induction: Dell’Orto carb
Ignition: CDI
Starting: Electric
Max Power: 34 hp / 24.8 kW @ 12000 rpm
Max Torque: 23 Nm / 16.9 lb-ft @ 11000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: 40mm Marzocchi telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Progressive with hydralyc shock, adjustable spring preload
Rear Wheel Travel: 133 mm / 5.2 in
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 110/70 ZR17
Rear Tyre: 150/60 ZR17
Dimensions: Height 1100 mm / 43.3 in Length 1980 mm / 78.0 in
Wheelbase: 1375 mm / 54.1 in
Seat Height: 760 mm / 29.9 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 129.0 kg / 284.4 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Consumption Average: 20.1 km/lit
Braking 60 – 0 / 100 – 0: 12.9 m / 36.4 m
Standing 1/4 Mile: 14.2 sec / 149.3 km/h
Top Speed: 172.3 km/h / / 107.3 mph
Road Test: Motosprint

The post Cagiva Mito 125  2 (1995) appeared first on MotorcycleSpecifications.com.

]]> Cagiva T4 500E (1988-91) https://motorcyclespecifications.com/cagiva-t4-500e-1988-91-specs/ Wed, 05 Apr 2023 19:40:59 +0000 https://motorcyclespecifications.com/?p=46040 The Cagiva T4 500E is a motorcycle produced from 1988-91, featuring a four-stroke, single-cylinder SOHC engine with a capacity of 451cc. The engine has a compression ratio of 9.0:1, and

The post Cagiva T4 500E (1988-91) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva T4 500E is a motorcycle produced from 1988-91, featuring a four-stroke, single-cylinder SOHC engine with a capacity of 451cc. The engine has a compression ratio of 9.0:1, and is air-cooled with a single Bing carb for induction and electronic CDI for ignition. It produces a maximum power of 41 horsepower at 7000 RPM and a maximum torque of 42 Nm at 7000 RPM. The transmission is a 5-speed with a chain final drive. The T4 500E has a dry weight of 140 kg and a wet weight of 160 kg, with a fuel capacity of 12 litres. The average fuel consumption is 17.7 km/h. The braking distance for 60-0 and 100-0 is 16.8m and 47.0m respectively. In standing 1/4 mile, it takes 14.7 seconds at a speed of 138.9 km/h. The top speed of the Cagiva is 157.0 km/h. The motorcycle is equipped with inverted telescopic upside-down forks for the front suspension, soft-damp single shock preload adjustment for rear suspension, a single 240 mm disc for front brakes, and a 130mm drum for rear brakes. The front and rear tyres are 3.00-21 and 5.10-17, respectively.

Technical specifications:

Make Model: Cagiva T4 500E

Year: 1988 – 91
Engine: Four stroke, single cylinder SOHC. 4 valves
Capacity: 451 cc / 27.5 cu-in
Bore x Stroke: 94 x 65 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: Single Bing carb
Ignition: Electronic CDI
Starting:
Max Power: 41.hp / 27.7 kW @ 7000 rpm
Max Power Rear Tyre: 35.2 hp / 26.2 kW @ 7500 rpm
Max Torque: 42 Nm / 30.9 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 40mm Inverted telescopic upside-down forks
Rear Suspension: Soft Damp single shock preload adjustment.
Front Brakes: Single 240mm disc
Rear Brakes: 130mm drum
Front Tyre: 3.00-21
Rear Tyre: 5.10-17
Dry Weight: 140 kg /
Wet Weight: 160.0 kg / 352 lbs
Fuel Capacity: 12 Litres / 3.17 US gal
Consumption Average: 17.7 km/h
Braking 60 – 0 / 100 – 0: 16.8 m / 47.0 m
Standing 1/4 Mile: 14.7 sec / 138.9 km/h
Top Speed: 157.0 km/h

The post Cagiva T4 500E (1988-91) appeared first on MotorcycleSpecifications.com.

]]> Cagiva E750 Elefant (1994-95) https://motorcyclespecifications.com/cagiva-e750-elefant-1994-95-specs/ Wed, 05 Apr 2023 14:20:01 +0000 https://motorcyclespecifications.com/?p=45751 The Cagiva Elefant 750C ie was produced in 1994-95 and has a capacity of 748 cc. The engine is a four-stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve

The post Cagiva E750 Elefant (1994-95) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 750C ie was produced in 1994-95 and has a capacity of 748 cc. The engine is a four-stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder. The compression ratio is 10.0:1 and the fuel injection is Mikuni BDST 38. The ignition is Kokusan electronic inductive discharge and the motorcycle has electric starting. The maximum power is 60 hp at 6000 rpm and the maximum torque is 60 Nm at 5500 rpm. The transmission is 5 speed and the final drive is a chain. The front suspension is 45mm telescopic forks and the rear suspension is a single shock with rising rate linkage preload rebound and damping. The front and rear brakes are both composed of a single disc with 2 piston calipers. The motorcycle has a seat height of 835 mm and a dry weight of 185 kg with a fuel capacity of 24 litres. Average fuel consumption is 16.4 km/lit and the top speed is 174 km/h. The braking time for 60-0 and 100-0 is 15.4 m and 44.8 m respectively. In a standing 1/4 mile, it can perform in 12.9 sec with a speed of 155.5 km/h. The Cagiva Elefant 750C ie has undergone testing by Adventure Group Motosprint in 1988 and 1989 with positive results.

Technical specifications:

Make Model: Cagiva Elefant 750C ie

Year: 1994 – 95
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder
Capacity: 748 cc / 45.6 cu-in
Bore x Stroke: 88 x 61.5 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: Mikuni BDST 38 fuel injection
Ignition: Kokusan electronic inductive discharge
Starting: Electric
Max Power: 60 hp / 49.6 kW @ 6000 rpm
Max Torque: 60 Nm / 43 lb-ft @ 5500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 45mm Telescopic forks
Rear Suspension: Single shock with rising rate linkage preload rebound and damping
Front Brakes: Single 296mm disc 2 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 140/80-17
Seat Height: 835 mm / 32.9 in
Dry Weight: 185 kg / 407.9 lbs
Fuel Capacity: 24 Litres / 6.3 US gal
Consumption Average: 16.4 km/lit
Braking 60 – 0 / 100 – 0: 15.4 m / 44.8 m
Standing 1/4 Mile: 12.9 sec / 155.5 km/h
Top Speed: 174 km/h / 108 mph
Road Test: Adventure Group test Motosprint 1988 Adventure Group Test Motosprint 1989

The post Cagiva E750 Elefant (1994-95) appeared first on MotorcycleSpecifications.com.

]]> cagiva Elefant 750 (1994-97) https://motorcyclespecifications.com/cagiva-elefant-750-1994-97-specs/ Wed, 05 Apr 2023 14:00:27 +0000 https://motorcyclespecifications.com/?p=45733 The Cagiva Elefant 750C ie Lucky Explorer was produced from 1994-97. The motorcycle has a four-stroke, 748cc engine with a 90-degree L-twin Cylinder, SOHC, desmodromic 2 valve per cylinder. The

The post cagiva Elefant 750 (1994-97) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 750C ie Lucky Explorer was produced from 1994-97. The motorcycle has a four-stroke, 748cc engine with a 90-degree L-twin Cylinder, SOHC, desmodromic 2 valve per cylinder. The bike is air-cooled and has a compression ratio of 10.0:1, with an induction system consisting of Mikuni BDST 38 fuel injection. The bike starts electrically and has a maximum power output of 60hp or 49.6 kW at 6000 rpm with a maximum torque of 60Nm or 43lb-ft at 5500 rpm. The five-speed transmission, with a chain final drive, provides smooth driving. It has a front telescopic fork suspension of 45mm and a single shock with rising rate linkage pre-load rebound and damping rear suspension. The braking system includes a single 296mm disc with 2 piston calipers on the front and a single 240mm disc with 2 piston calipers in the rear to provide quick stopping power. The vehicle has front and rear measured tyre sizes of 100/90-19 and 140/80-17, respectively. This motorcycle supports a rider seat height of 835mm and has a dry weight of 185 kg. The fuel tank can hold up to 24 litres or 6.3 US gallons. It also has an average consumption of 16.4 km per litre, a 15.4m and 44.8m braking distance from 60-0 and 100-0, respectively. It has a standing 1/4 mile of 12.9 seconds at 155.5 km/h and a top speed of 174 km/h.

Technical specifications:

Make Model: Cagiva Elefant 750C ie Lucky Explorer

Year: 1994 – 97
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder
Capacity: 748 cc / 45.6 cu-in
Bore x Stroke: 88 x 61.5 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: Mikuni BDST 38 fuel injection
Ignition: Kokusan electronic inductive discharge
Starting: Electric
Max Power: 60 hp / 49.6 kW @ 6000 rpm
Max Torque: 60 Nm / 43 lb-ft @ 5500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 45mm Telescopic forks
Rear Suspension: Single shock with rising rate linkage preload rebound and damping
Front Brakes: Single 296mm disc 2 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 140/80-17
Seat Height: 835 mm / 32.9 in
Dry Weight: 185 kg / 407.9 lbs
Fuel Capacity: 24 Litres / 6.3 US gal
Consumption Average: 16.4 km/lit
Braking 60 – 0 / 100 – 0: 15.4 m / 44.8 m
Standing 1/4 Mile: 12.9 sec / 155.5 km/h
Top Speed: 174 km/h

The post cagiva Elefant 750 (1994-97) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Navigator 1000 (2004-05) https://motorcyclespecifications.com/cagiva-navigator-1000-2004-05-specs/ Wed, 05 Apr 2023 11:52:00 +0000 https://motorcyclespecifications.com/?p=45615 The Cagiva Navigator 1000 was a motorcycle produced from 2004-05. It had a four-stroke, 90-degree V-twin engine with a capacity of 996cc and a compression ratio of 11.3:1. The bike

The post Cagiva Navigator 1000 (2004-05) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Navigator 1000 was a motorcycle produced from 2004-05. It had a four-stroke, 90-degree V-twin engine with a capacity of 996cc and a compression ratio of 11.3:1. The bike was liquid-cooled with electronic fuel injection and had a maximum power of 99 ho/73 kW at 8500 rpm and a maximum torque of 95 Nm/9.7 kgf-m at 7000 rpm. The clutch was cable-operated and the transmission had six speeds with a final chain drive. The bike had front suspension with a 45mm telescopic hydraulic fork and rear suspension that was progressive with a hydraulic monoshock. The front brakes had two 298mm discs with four-piston calipers while the rear had a single 220mm disc with a two-piston caliper. The bike had 110/80-18 front tyres and 150/70-17 rear tyres with a seat height of 850 mm and ground clearance of 150 mm. Dry weight was 210 kg, while wet weight was 225 kg, with a fuel capacity of 20 litres. Its average consumption was 17.3 km/lit, and it had a top speed of 211.6 km/h and could go from standing to a quarter-mile in 12 seconds.

Technical specifications:

Make Model: Cagiva Navigator 1000

Year: 2004 – 05
Engine: Four stroke, 90 degrees-V-twin, DOHC, 4 valves per cylinder (Suzuki TL1000)
Capacity: 996 cc / 60.7 cu-in
Bore x Stroke: 98 X 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Induction: Electronic fuel injection
Ignition: Electronic, transistorized
Starting: Electric
Max Power: 99 ho / 73 kW @ 8500 rpm
Max Torque: 95 Nm / 9.7 kgf-m @ 7000 rpm
Clutch: Cable-operated multi-plate wet clutch.
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 45mm Telescopic hydraulic fork
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Progressive with hydraulic monoshock, preload and rebound damping adjustable.
Rear Wheel Travel: 160 mm / 6.3 in
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 110/80-18
Rear Tyre: 150/70-17
Seat Height: 850 mm / 33.5 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 210 kg / 463 lbs
Wet Weight: 225 kg / 496 lbs
Fuel Capacity: 20 Litres / 5.3 US gal
Consumption Average: 17.3 km/lit
Standing 1/4 Mile: 12.0 sec
Top Speed: 211.6 km/h

The post Cagiva Navigator 1000 (2004-05) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Elefant E900C (1995-96) https://motorcyclespecifications.com/cagiva-elefant-e900c-1995-96-specs/ Wed, 05 Apr 2023 10:22:12 +0000 https://motorcyclespecifications.com/?p=45536 The Cagiva Elefant E900C motorcycle, also known as the Ducati E900, was produced from 1995-96. It has a 904cc, four-stroke, L twin cylinder engine with a bore and stroke of

The post Cagiva Elefant E900C (1995-96) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant E900C motorcycle, also known as the Ducati E900, was produced from 1995-96. It has a 904cc, four-stroke, L twin cylinder engine with a bore and stroke of 92 x 68 mm, and a compression ratio of 9.2:1. The bike is air-cooled with Mikuni BDST 38 carburetors and Marelli electronic inductive discharge ignition. It has a maximum power output of 95 hp at 8500 rpm and maximum torque of 78 Nm at 5250 rpm. The clutch is a dry multi-disc and the transmission is a six-speed with a chain final drive. The frame is a double steel tubular cradle with 45mm Showa upside-down telescopic forks for the front suspension and a rising rate box monoshock adjustable for preload for the rear suspension. The front brakes consist of 2x 282mm discs with four-piston calipers while the rear brake is a single 240mm disc with a four-piston caliper. The tires are 100/90-19 in the front and 140/80-17 in the rear. The motorcycle has a length of 2295mm, width of 860mm, height of 970mm, and a wheelbase of 1570mm. The seat height is 857mm, ground clearance is 260mm, and dry weight is 204kg. It has a fuel capacity of 22 liters and average fuel consumption of 38.0 mpg. The standing 1/4 mile time is 13.2 seconds at 95.5 mph, with a top speed of 183.4 km/h or 114 mph. This information was obtained from a road test conducted by Motosprint in 1993.

Technical specifications:

Make Model: Ducati E900 (Cagiva Elefant E900)

Year: 1995 – 96
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder
Capacity: 904 cc / 55.1 cu-in
Bore x Stroke: 92 x 68 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Mikuni BDST 38 carburetors
Ignition: Marelli electronic inductive discharge
Starting: Electric
Max Power: 95 hp / 70 kW @ 8500 rpm
Max Torque: 78 Nm / 57.5 lb-ft @ 5250 rpm
Clutch: Dry Multi-disc
Transmission: 6 Speed
Final Drive: Chain
Frame: Double steel tubular cradle
Front Suspension: 45mm Showa upside down telescopic forks
Rear Suspension: Rising rate box, monoshock adjustable for preload
Front Brakes: 2x 282mm discs 4 piston calipers
Rear Brakes: Single 240mm disc 4 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 140/80-17
Dimensions: Length 2295 mm / 90.3 in Width 860 mm / 33.8 in Height 970 mm / 38.1 in
Wheelbase: 1570 mm / 61.8 in
Seat Height: 857 mm / 33.7 in
Ground Clearance: 260 mm / 10.2 in
Dry Weight: 204 kg / 449.7 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Consumption Average: 38.0 mpg
Standing 1/4 Mile: 13.2 sec / 95.5 mph
Top Speed: 114. mph
Top Speed: 183.4 km/h / 114. mph
Road Test: Motosprint 1993

The post Cagiva Elefant E900C (1995-96) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125 II Replica (1993) https://motorcyclespecifications.com/cagiva-mito-125-ii-replica-1993-specs/ Wed, 05 Apr 2023 10:11:58 +0000 https://motorcyclespecifications.com/?p=45528 The Cagiva Mito 125 II Replica is a 1993 motorcycle model with a two-stroke, single cylinder engine and an electric variable power read valve. It has a capacity of 125.6

The post Cagiva Mito 125 II Replica (1993) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 II Replica is a 1993 motorcycle model with a two-stroke, single cylinder engine and an electric variable power read valve. It has a capacity of 125.6 cc and a compression ratio of 13.0:1. The bike features a 28mm Dell’Orto flat slide carburetor and CDI ignition, with a kick start. The maximum power is 33.5 hp at 10500 rpm and the maximum torque is 19 Nm at 9000 rpm. It has a 7-speed transmission and a chain final drive. The front suspension is USD telescopic forks and the rear suspension is a swinging arm single shock. The front brake is a single 320mm disc with a 4-piston caliper and the rear brake is a single 230mm disc with a 1-piston caliper. The front tire size is 110/70-17 and the rear tire size is 150/70-17. The dry weight is 117 kg and the wet weight is 125 kg with a fuel capacity of 12.8 liters. The bike can brake from 60-0 in 13.1 meters and from 100-0 in 37 meters. It has a standing quarter-mile time of 14.0 seconds and reaches a top speed of 164.2 km/h.

Technical specifications:

Make Model: Cagiva Mito 125 II Replica

Year: 1993
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h

The post Cagiva Mito 125 II Replica (1993) appeared first on MotorcycleSpecifications.com.

]]> Cagiva V-Raptor 650 (2001-02) https://motorcyclespecifications.com/cagiva-v-raptor-650-2001-02-specs/ Wed, 05 Apr 2023 07:39:02 +0000 https://motorcyclespecifications.com/?p=45382 The Cagiva V-Raptor 650 (2001-02) motorcycle has a four-stroke, 90-degree, V-twin DOHC engine with 4 valves per cylinder and a capacity of 645cc. It has liquid cooling and a compression

The post Cagiva V-Raptor 650 (2001-02) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva V-Raptor 650 (2001-02) motorcycle has a four-stroke, 90-degree, V-twin DOHC engine with 4 valves per cylinder and a capacity of 645cc. It has liquid cooling and a compression ratio of 11.5:1. The induction system includes 2 x 39mm Mikuni BDSR39, and the ignition is digital with electric starting. The maximum power output is 70 hp/51 kW @9000rpm, and the maximum torque is 63.5 Nm/46.8 lb-ft @7400rpm. The transmission is a 6-speed with a final drive chain. The frame is made of high-strength steel tubular and the front suspension features 43mm upside-down forks with 120mm/4.7in of wheel travel. The rear suspension is monoshock with 138mm/5.4in of wheel travel. The front brakes are 2x 298mm discs with 4-piston calipers, and the rear brakes are a single 220mm disc with 2-piston calipers. The front tyre is 120/70ZR17, and the rear tyre is 160/60ZR17. The wheelbase is 1438mm/56.6in, and the seat height is 775mm/30.5in with a ground clearance of 165mm/6.5in. The dry weight of the bike is 180kg/396.8lbs with a fuel capacity of 19 litres/5.0 US gal. The average fuel consumption is 21.0 km/lit, and the bike has a standing 1/4 mile time of 12.2 seconds and a top speed of 204.8 km/h.

Technical specifications:

Make Model: Cagiva V-Raptor 650

Year: 2001 – 02
Engine: Four stroke, 90 degrees-V-twin, DOHC, 4 valves per cylinder.
Capacity: 645 cc / 39.3 cu-in
Bore x Stroke: 81 x 62.6 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: 2 x 39mm Mikuni BDSR39
Ignition: Digital
Starting: Electric
Max Power: 70 hp / 51 kW @ 9000 rpm
Max Torque: 63.5 Nm / 46.8 lb-ft @ 7400 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: High strength steel tubular frame
Front Suspension: 43mm Upside down forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock
Rear Wheel Travel: 138 mm / 5.4 in
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 160/60 ZR17
Wheelbase: 1438 mm / 56.6 in
Seat Height: 775 kg / 30.5 in
Ground Clearance: 165 mm / 6.5 in
Dry Weight: 180 kg / 180.0 kg / 396.8 lbs
Fuel Capacity: 19 Litres / 5.0 US gal
Consumption Average: 21.0 km/lit
Standing 1/4 Mile: 12.2 sec
Top Speed: 204.8 km/h

The post Cagiva V-Raptor 650 (2001-02) appeared first on MotorcycleSpecifications.com.

]]> Cagiva X Raptor (2005) https://motorcyclespecifications.com/cagiva-x-raptor-2005-specs/ Wed, 05 Apr 2023 02:19:08 +0000 https://motorcyclespecifications.com/?p=45089 The Cagiva X-3 Raptor is a 2005 motorcycle with a liquid-cooled, 996cc engine offering a top power of 105.5 kW at 8500 rpm and 90 Nm torque at 7000 rpm,

The post Cagiva X Raptor (2005) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva X-3 Raptor is a 2005 motorcycle with a liquid-cooled, 996cc engine offering a top power of 105.5 kW at 8500 rpm and 90 Nm torque at 7000 rpm, delivered through a 6-speed transmission and a chain final drive. Featuring electronic fuel injection and CDI ignition, it has a 43mm upside-down hydraulic fork front suspension, a rising rate monoshock preload adjustable rear suspension, 2x 298mm discs 4 piston calipers front brakes, and a single 220mm disc 2 piston caliper rear brake, with a wheelbase of 1440 mm, seat height of 770 mm, dry weight of 197 kg, and fuel capacity of 15.2 litres.

Technical specifications:

Make Model: Cagiva X-3 Raptor

Year: 2005
Engine: Four stroke, 90 degrees V-twin, DOHC, 4 valves per cylinder (Suzuki DL100)
Capacity: 996 cc / 60.7 cu-in
Bore x Stroke: 11.3:1
Compression Ratio: 99 x 66 mm
Cooloing System: Liquid cooled
Induction: Electronic fuel injection
Ignition: CDI
Starting: Electric
Max Power: 105.5 / 78.7 kW @ 8500 rpm
Max Torque: 90 Nm / 66.4 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 43mm Upside down hydraulic fork
Rear Suspension: Rising rate monoshock preload adjustable
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1440 mm / 56.7 in
Seat Height: 770 mm / 30.3 in
Dry Weight: 197 kg / 434 lbs
Fuel Capacity: 15.2 Litres / 4.0 US gal

The post Cagiva X Raptor (2005) appeared first on MotorcycleSpecifications.com.

]]> Cagiva V Raptor (2003-05) https://motorcyclespecifications.com/cagiva-v-raptor-2003-05-specs/ Tue, 04 Apr 2023 20:08:57 +0000 https://motorcyclespecifications.com/?p=44750 The Cagiva V-Raptor 1000 was produced from 2003-2005 and had a four-stroke, 90-degree V-twin engine with a capacity of 996cc. The engine had electronic fuel injection and produced a maximum

The post Cagiva V Raptor (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva V-Raptor 1000 was produced from 2003-2005 and had a four-stroke, 90-degree V-twin engine with a capacity of 996cc. The engine had electronic fuel injection and produced a maximum power of 105.5 kW at 8500 rpm and a maximum torque of 90 Nm at 7000 rpm. The motorcycle had a six-speed transmission and a final drive chain. The front suspension was a 43mm upside-down hydraulic fork and the rear suspension was a rising rate mono-shock, both of which were adjustable. The front brakes consisted of 2x 298mm discs with 4-piston calipers, and the rear brake was a single 220mm disc with a 2-piston caliper. The bike had a wheelbase of 1440mm and a seat height of 770mm. The dry weight was 197kg and the fuel capacity was 15.2 litres. The consumption average was 16.6 km/lit and the top speed was 232 km/h. It could complete the standing quarter-mile in 11.1 seconds at a speed of 208 km/h.

Technical specifications:

Make Model: Cagiva V-Raptor 1000

Year: 2003 – 05
Engine: Four stroke, 90 degrees V-twin, DOHC, 4 valves per cylinder (Suzuki DL100)
Capacity: 996 cc / 60.7 cu-in
Bore x Stroke: 11.3:1
Compression Ratio: 99 x 66 mm
Cooloing System: Liquid cooled
Induction: Electronic fuel injection
Ignition: CDI
Starting: Electric
Max Power: 105.5 / 78.7 kW @ 8500 rpm
Max Torque: 90 Nm / 66.4 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 43mm Upside down hydraulic fork
Rear Suspension: Rising rate monoshock preload adjustable
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1440 mm / 56.7 in
Seat Height: 770 mm / 30.3 in
Dry Weight: 197 kg / 434 lbs
Fuel Capacity: 15.2 Litres / 4.0 US gal
Consumption Average: 16.6 km/lit
Standing 1/4 Mile: 11.1 sec / 208 km/h
Top Speed: 232 km/h

The post Cagiva V Raptor (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Elefant 125 (1989) https://motorcyclespecifications.com/cagiva-elefant-125-1989-specs/ Tue, 04 Apr 2023 17:08:56 +0000 https://motorcyclespecifications.com/?p=44584 The Cagiva Elefant 125 was a motorcycle released in 1989. It had a two stroke, single cylinder engine with a capacity of 125 cc and a compression ratio of 12.9:1.

The post Cagiva Elefant 125 (1989) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 125 was a motorcycle released in 1989. It had a two stroke, single cylinder engine with a capacity of 125 cc and a compression ratio of 12.9:1. The bike was equipped with a single Dell’Orto premix carburetor and electronic ignition, with a maximum power output of 23.6 hp at 9100 rpm and max torque of 1.8 kgf-m at 8000 rpm. The transmission included six speeds and the final drive was via chain. The bike had Telescopic forks for its front suspension and a swinging arm shock for its rear suspension. The front brake was a single 240mm disc and the rear had a single 130mm drum. The front tyre was 2.75-21 and the rear was 4.60-17. The dry weight of the bike was 125 kg and it had a fuel capacity of 14 litres or 3.7 US gallons.

Technical specifications:

Make Model: Cagiva Elefant 125

Year: 1989
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 12.9:1
Induction: Single Dell’Orto premixcarburetor
Ignition: Electronic
Starting: Kick
Max Power: 23.6 hp / 17.5 kW @ 9100 rpm
Max Torque: 1.8 kgf-m @ 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 240mm disc
Rear Brakes: Single 130mm drum
Front Tyre: 2.75-21
Rear Tyre: 4.60-17
Dry Weight: 125 kg
Fuel Capacity: 14 Litres / 3.7 US gal

The post Cagiva Elefant 125 (1989) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Raptor 125 (2003) https://motorcyclespecifications.com/cagiva-raptor-125-2003-specs/ Tue, 04 Apr 2023 15:16:17 +0000 https://motorcyclespecifications.com/?p=44478 The Cagiva Raptor 125 is a 2003 motorcycle with a two stroke, single cylinder engine that has a capacity of 125 cc. It is cooled by liquid and has a

The post Cagiva Raptor 125 (2003) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Raptor 125 is a 2003 motorcycle with a two stroke, single cylinder engine that has a capacity of 125 cc. It is cooled by liquid and has a compression ratio of 13.0:1. The bike has a single Dell’Orto premix induction and produces a max power of 15 horsepower at 9100 rpm, as well as a max torque of 12 Nm at 8500 rpm. The transmission has 6 gears, and the final drive is a chain. Suspension includes telescopic forks in the front with a wheel travel of 120 mm, and a single shock in the rear with a wheel travel of 140 mm. The front brake is a single 320mm disc, and the rear brake is a single 220mm disc. The front and rear tires are 110/70 ZR17 and 150/60 ZR17 respectively. The bike has a wheelbase of 1395 mm and a seat height of 780 mm, with a dry weight of 125 kg. The fuel tank has a capacity of 12.5 litres or 3.3 US gallons.

Technical specifications:

Make Model: Cagiva Raptor125

Year: 2003 –
Engine: Two stroke, single cylinder,
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Cooling System: Liquid cooled
Compression Ratio: 13.0:1
Induction: Single Dell’Orto premix
Ignition:
Starting:
Max Power: 15 hp / 10.9 kW @ 9100 rpm
Max Torque: 12 Nm / 8.9 lb-ft @ 8500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Single shock
Rear Wheel Travel: 140 mm / 5.5 in
Front Brakes: Single 320mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 110/70 ZR17
Rear Tyre: 150/60 ZR17
Wheelbase: 1395 mm / 54.9 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Cagiva Raptor 125 (2003) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125 II Koncinski Replica (1994) https://motorcyclespecifications.com/cagiva-mito-125-ii-koncinski-replica-1994-specs/ Tue, 04 Apr 2023 14:42:04 +0000 https://motorcyclespecifications.com/?p=44445 The Cagiva Mito 125 II Koncinski Replica is a 125.6 cc motorcycle released in 1994. It has a two-stroke, single-cylinder engine with a 13.0:1 compression ratio and 28mm Dell’Orto flat

The post Cagiva Mito 125 II Koncinski Replica (1994) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 II Koncinski Replica is a 125.6 cc motorcycle released in 1994. It has a two-stroke, single-cylinder engine with a 13.0:1 compression ratio and 28mm Dell’Orto flat slide carburetor. It can produce a max power of 33.5 hp at 10500 rpm and a max torque of 19 Nm at 9000 rpm. The bike has a 7-speed transmission and chain final drive, with USD telescopic forks and a swinging arm single shock rear suspension. Braking is done with a single 320mm disc 4-piston caliper on the front and a single 230mm disc 1-piston caliper on the rear. The bike has a dry weight of 117 kg and a fuel capacity of 12.8 liters. It can reach a top speed of 164.2 km/h and can complete the standing 1/4 mile in 14.0 seconds at 148.9 km/h. The bike has a stylish design and is a popular choice among motorcycle enthusiasts.

Technical specifications:

Make Model: Cagiva Mito 125 II Koncinski Replica

Year: 1994
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h

The post Cagiva Mito 125 II Koncinski Replica (1994) appeared first on MotorcycleSpecifications.com.

]]> Cagiva 750 Elefant (1987-88) https://motorcyclespecifications.com/cagiva-750-elefant-1987-88-specs/ Tue, 04 Apr 2023 09:43:02 +0000 https://motorcyclespecifications.com/?p=44169 The Cagiva Elefant 750, produced in 1987-88, has a four-stroke, L twin-cylinder engine with SOHC, desmodromic 2 valves per cylinder. It has a capacity of 748cc and a compression ratio

The post Cagiva 750 Elefant (1987-88) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Elefant 750, produced in 1987-88, has a four-stroke, L twin-cylinder engine with SOHC, desmodromic 2 valves per cylinder. It has a capacity of 748cc and a compression ratio of 9.3:1. Induction is through Bing 34/32/375, and ignition is via Kokusan. The bike has a maximum power output of 60.5hp at 8000rpm and a maximum torque of 63.7Nm at 5500rpm. The transmission has five speeds with a final drive via chain. The front suspension is provided by 41mm Marzocchi forks and the rear suspension is an ~Ahlins rising-rate swingarm. The front brake is a single 260mm disc with a 4-piston caliper, while the rear brake is a single 240mm disc with a 2-piston caliper. Front and rear tires are 90/90-21 and 130/90-17 respectively. The bike has a wheelbase of 1520mm and a seat height of 900mm. Dry weight is 191kg while wet weight is 213.0kg with a fuel capacity of 19 litres. This bike has a top speed of 174km/h and was tested in the Adventure Group test Motosprint in 1988 and 1989.

Technical specifications:

Make Model: Cagiva Elefant 750

Year: 1987 – 88
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder
Capacity: 748 cc / 45.6 cu-in
Bore x Stroke: 88 x 61.5 mm
Cooling System: Air cooled
Compression Ratio: 9.3:1
Induction: Bing 34/32/375
Ignition: Kokusan
Starting: Electric
Max Power: 60.5 hp / 44.5 kW @ 8000 rpm
Max Power Rear Tyre: 52.9 hp @ 7250 rpm
Max Torque: 63.7 Nm / 47 lb-ft @ 5500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Marzocchi forks
Rear Suspension: ~Ahlins rising-rate swingarm
Front Brakes: Single 260mm disc 4 piston caliper
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 90/90-21
Wheelbase: 1520 mm / 59.8 in
Seat Height: 900 mm / 35.4 in
Rear Tyre: 130/90-17
Dry Weight: 191 kg / 421 lbs
Wet Weight: 213.0 kg / 469 lbs
Fuel Capacity: 19 Litres / 5.0 US gal
Top Speed: 174 km/h / 108 mph
Road Test: Adventure Group test Motosprint 1988 Adventure Group Test Motosprint 1989

The post Cagiva 750 Elefant (1987-88) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Gran Canyon 900 (1999-00) https://motorcyclespecifications.com/cagiva-gran-canyon-900-1999-00-specs/ Tue, 04 Apr 2023 08:43:09 +0000 https://motorcyclespecifications.com/?p=44113 The Cagiva Gran Canyon 900ie is a four stroke, 90 degrees L twin cylinder motorcycle, with a capacity of 904cc/55.1 cu-in. It has a maximum power of 73 hp/66.7 hp

The post Cagiva Gran Canyon 900 (1999-00) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Gran Canyon 900ie is a four stroke, 90 degrees L twin cylinder motorcycle, with a capacity of 904cc/55.1 cu-in. It has a maximum power of 73 hp/66.7 hp at 7100 rpm, and a maximum torque of 78 Nm/57.5 lb-ft at 5000 rpm. The motorcycle has a wet sump, Weber fuel injection, and Marelli electronic inductive discharge ignition. It uses a six-speed transmission and chain final drive. The frame is made of high-tensile steel rectangular, single tube cradle. Telescopic hydraulic fork, and progressive soft damp with hydraulic single shock absorber suspension are used. The front brakes have 2x296mm discs and 2 piston calipers while the rear brake has a single 240mm disc and a 2-piston caliper. It has a 100/90 R19 front tyre and a 150/70 R17 rear tyre. The wheelbase measures 1530mm/60.2in, and the seat height is 850mm/38.4in. The dry weight of the motorcycle is 216kg/476 lbs, and the wet weight is 224kg/493 lbs. It has a fuel capacity of 20 litres/5.2 US gal and the average consumption is 15.8 km/lit. It has a top speed of 191 km/h and can brake from 60-0 in 12.9m or 100-0 in 40.4m. It can also reach the quarter-mile mark in 12.8 seconds, with a speed of 164.9 km/h.

Technical specifications:

Make Model: Cagiva Gran Canyon 900ie

Year: 1999 – 00
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder.
Capacity: 904 cc / 55.1 cu-in
Bore x Stroke: 92 x 68 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
: Wet sump
Induction: Weber fuel injection
Ignition: Marelli electronic inductive discharge
Starting: Electric
Max Power: 73 hp / 66.7 hp @ 7100 rpm
Max Power Rear Ttre: 66.6 hp @ 7100 rpm
Max Torque: 78 Nm / 57.5 lb-ft @ 5000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: High-tensile steel rectangular, single tube cradle
Front Suspension: 45mm Telescopic hydraulic fork with advanced axle
Rear Suspension: Progressive Soft Damp with hydraulic single shock absorber
Front Brakes: 2x 296mm discs 2 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 100/90 R19
Rear Tyre: 150/70 R17
Wheelbase: 1530 mm / 60.2 in
Seat Height: 850 mm / 38.4 in
Ground Clearance: 190 mm / 7.4 in
Dry Weight: 216 kg / 476 lbs
Wet Weight: 224 kg / 493 lbs
Fuel Capacity: 20 Litres / 5.2 US gal
Consumption Average: 15.8 km/lit
Braking 60 – 0 / 100 – 0: 12.9 m / 40.4 m
Standing 1/4 Mile: 12.8 sec / 164.9 km/h
Top Speed: 191 km/h

The post Cagiva Gran Canyon 900 (1999-00) appeared first on MotorcycleSpecifications.com.

]]> Cagiva 125 Mito (1999-00) https://motorcyclespecifications.com/cagiva-125-mito-1999-00-specs/ Tue, 04 Apr 2023 07:13:02 +0000 https://motorcyclespecifications.com/?p=44031 The Cagiva Mito 125 is a two-stroke, single-cylinder motorcycle with a liquid-cooled engine and Dell’Orto carb induction. It has an electric variable power read valve, a 125.6cc capacity, and a

The post Cagiva 125 Mito (1999-00) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 is a two-stroke, single-cylinder motorcycle with a liquid-cooled engine and Dell’Orto carb induction. It has an electric variable power read valve, a 125.6cc capacity, and a compression ratio of 6.3:1. The bike has a maximum power of 34hp at 12000rpm and a maximum torque of 23Nm at 11000rpm. The clutch is wet, multiple discs, and cable-operated, while the transmission has six speeds and the final drive is a chain. The front suspension is 40mm Marzocchi telescopic forks with a front wheel travel of 120mm, while the rear suspension is progressive with a hydralyc shock and adjustable spring preload and has a rear wheel travel of 133mm. The front brakes are single 320mm discs with a four-piston caliper, and the rear brakes are single 230mm discs with a two-piston caliper. The front tire size is 110/70 ZR17, and the rear tire size is 150/60 ZR17. The motorcycle is 1100mm in height, 1980mm in length, and has a wheelbase of 1375mm. The seat height is 760mm, and the ground clearance is 150mm. It has a dry weight of 129kg and a fuel capacity of 12.5 liters or 3.0 US gallons.

Technical specifications:

Make Model: Cagiva Mito 125

Year: 1999 – 00
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 6.3:1
Cooling System: Liquid cooled
Induction: Dell’Orto carb
Ignition: CDI
Starting: Electric
Max Power: 34 hp / 24.8 kW @ 12000 rpm
Max Torque: 23 Nm / 16.9 lb-ft @ 11000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 40mm Marzocchi telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Progressive with hydralyc shock, adjustable spring preload
Rear Wheel Travel: 133 mm / 5.2 in
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 110/70 ZR17
Rear Tyre: 150/60 ZR17
Dimensions: Height 1100 mm / 43.3 in Length 1980 mm / 78.0 in
Wheelbase: 1375 mm / 54.1 in
Seat Height: 760 mm / 29.9 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 129.0 kg / 284.4 lbs
Fuel Capacity: 12.5 Litres / 3.0 US gal

The post Cagiva 125 Mito (1999-00) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Freccia 125 C10R (1988) https://motorcyclespecifications.com/cagiva-freccia-125-c10r-1988-specs/ Tue, 04 Apr 2023 05:33:10 +0000 https://motorcyclespecifications.com/?p=43939 The Cagiva Freccia 125 C10R is a motorcycle from 1988 with a two-stroke, single-cylinder engine and a capacity of 125 cc. It has a liquid cooling system and a compression

The post Cagiva Freccia 125 C10R (1988) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Freccia 125 C10R is a motorcycle from 1988 with a two-stroke, single-cylinder engine and a capacity of 125 cc. It has a liquid cooling system and a compression ratio of 13.0:1. The bike has an induction of 28mm Dell’Orto premix carburetor and an ignition of CDI with electric starting. The C10R has a maximum power of 27 hp at 10500 rpm and a maximum torque of 20 Nm at 8250 rpm. It has a 7-speed transmission and a chain final drive. The front suspension is Marzocchi telescopic, adjustable anti-dive, while the rear suspension is a Marzocchi monoshock. The front and rear brakes are single 260mm and 240mm Brembo discs, respectively. The bike has a dry weight of 128 kg and a fuel capacity of 16 liters. The average consumption is 19.8 km/lit. The braking performance is 13.5 m from 60 to 0 km/h and 41.1 m from 100 to 0 km/h. Standing a quarter-mile time is 15.4 sec with 135.8 km/h speed and a top speed is 163.7 km/h.

Technical specifications:

Make Model: Cagiva Freccia 125 C10R

Year: 1988
Engine: Two stroke, single cylinder
Capacity: 125 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Cooling System: Liquid cooled
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto premix carburetor
Ignition: CDI
Starting: Electric
Max Power: 27 hp / 19.9 kW @ 10500 rpm
Max Power Rear Tyre: 24.1 hp @ 10500 rpm
Max Torque: 20 Nm / 14.7 lb-ft @ 8250 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: Marzocchi telescopic, adjustable anti-dive
Rear Suspension: Marzocchi monoshock
Front Brakes: Single 260mm Brembo disc
Rear Brakes: Single 240mm Brembo disc
Front Tyre: 100/80-16
Rear Tyre: 130/80-17
Dry Weight: 128 kg / 282 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 19.8 km/lit
Braking 60 – 0 / 100 – 0: 13.5 m / 41.1 m
Standing 1/4 Mile: 15.4 sec / 135.8 km/h
Top Speed: 163.7 km/h

The post Cagiva Freccia 125 C10R (1988) appeared first on MotorcycleSpecifications.com.

]]>