Cagiva Mito I  Naked Archives - MotorcycleSpecifications.com Find your motorcycle specifications Sat, 08 Apr 2023 02:46:06 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Vespa 125 (1977-97) https://motorcyclespecifications.com/vespa-125-1977-97-specs/ Tue, 04 Apr 2023 13:25:01 +0000 https://motorcyclespecifications.com/?p=44375 The Vespa 125 was produced between 1977 and 1997 under several different models including the P125X, PX 125, PX 125 Arcobleno/Lusso, PK125 S, and GTS Super. The engine was a

The post Vespa 125 (1977-97) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 125 was produced between 1977 and 1997 under several different models including the P125X, PX 125, PX 125 Arcobleno/Lusso, PK125 S, and GTS Super. The engine was a two-stroke, single cylinder with a capacity of 123.4 cc and a compression ratio of 9.2:1. The fuel mixture was 1:50 and the ignition was a flywheel alternator with a built-in H.T. coil. The clutch was multiplate and the transmission had four speeds with a grip-shift and constant mesh. The front and rear suspensions used helical springs and double-acting hydraulic dampers. The brakes were drum brakes with 125 mm in the front and rear. The fuel capacity was 8 L with a reserve of 1.2 L and had an average consumption of 2.7 L/100 km. The maximum power was 5.9 kW/8 hp at 5800 rpm and the top speed was 100 km/h. The Vespa 125 was available in white, red, black, blue, and yellow. This information was sourced from Wikipedia and scooterhelp.com.

Technical specifications:

Make Model: Vespa 125, P125X, PX 125, PX 125 Arcobleno/Lusso, PK125 S, GTS Super

Year: 1977 – 97
Engine: Two stroke, single cylinder
Capacity: 123.4 cc 7.5 cub in
Bore x Stroke: 52.5 x 57.0 mm
Carburetor: Dell,Orto SI 24/24 E
Compression Ratio: 9.2:1
Cooling: Air cooled, centrifugal fan
Fuel Mixture: 1:50
Spark Plug: Champion N2C
Ignition: Flywheel alternator, with built in H.T. coil
Starting: Kick start
Clutch: Multiplate
Max Power: 5.9 kW / 8 hp @ 5800 rpm
Max Torque: 10.5 kW / 1.07 kgf-m / 7.7 ft/lb @ 4500 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Gears: 1st 16.4 / 2nd 11.0 / 3rd 7.60 / 4th 5.8:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Helical spring and double acting hydraulic dampers
Rear Suspension: Helical spring and double acting hydraulic dampers
Front Brakes: Drum, 125 mm
Rear Brakes: Drum, 125 mm
Wheels: Interchangeable
Front Tyre: 3.5 x 10″
Rear Tyre: 3.5 x 10″
Dimensions: Length: 1655 mm / 65.2 in Width: 790 mm / 31.1 in Height: 1170 mm / 46.4 in
Wheelbase: 1250 mm / 49.2 in
Turning Radius: 1650 mm / 65.0 in.
Dry Weight: 112 kg / 247 lbs
Fuel Capacity: 8 L / 2.1 US gal
Reserve: 1.2 L / 0.55 US gal
Consumption average: 2,7 L/100 km / 37 km/l / 87 US mpg
Top Speed: 100 km/h / 62 mph
Colours: White, Red, Black, Blue, Yellow
Note: Specifications for the Corsa 125 (1988 – 98)
Sources: Wikipedia, scooterhelp.com

The post Vespa 125 (1977-97) appeared first on MotorcycleSpecifications.com.

]]> Vespa PK50 (1946-47) https://motorcyclespecifications.com/vespa-pk50-1946-47-specs/ Tue, 04 Apr 2023 02:02:57 +0000 https://motorcyclespecifications.com/?p=43743 The Vespa PK50 motorcycle was first produced in 1946-47, with a total of 36,126 units produced. It was equipped with a 98cc two-stroke, single cylinder engine that provided a maximum

The post Vespa PK50 (1946-47) appeared first on MotorcycleSpecifications.com.

]]> The Vespa PK50 motorcycle was first produced in 1946-47, with a total of 36,126 units produced. It was equipped with a 98cc two-stroke, single cylinder engine that provided a maximum power of 2.4 kW or 3.2 hp. The engine had a capacity of 6 cubic inches with a bore and stroke of 50 x 50 mm. The motorcycle had a Dell’Orto T2 16/17 carburettor and was air-cooled with a Volcano magneto ignition and a 6V battery. It had a kick-start and a continuous speed variator gearbox with a direct drive final drive. The frame was made of pressed sheet steel with a streamlined monocoque structure. It also had elastic front suspension with spiral steel springs and rubber buffer rear suspension. The brakes were drum-style both in front and rear. The wheels were made of pressed steel flanges and interchangeable split rims. The motorcycle had a dry weight of 60 kg or 132 lbs and carried fuel capacity of 5 L or 1.3 US gal. It had a fuel consumption of 2.0 L/100 km, 50 km/l or 118 US mpg, and a top speed of 60 km/h or 37 mph. It was available in silver and metallic green colours.

Technical specifications:

Make Model: Vespa 98

Year: 1946 – 47
Production: 36 126 units
Engine: Two Stroke, single cylinder
Capacity: 98 cc / 6 cub in
Bore and Stroke: 50 x 50 mm
Carburettor: Dell’Orto T2 16/17
Cooling: Air cooled
Battery: 6V
Ignition: Volcano magneto
Starting: Kick start
Max Power: 2.4 kW / 3.2 hp
Transmission: Continuous speed variator gearbox
Final Drive: Direct drive
Frame: Pressed sheet steel with streamlined monocoque structure
Front Suspension: Elastic with spiral steel springs
Rear Suspension: Rubber buffers
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Pressed steel flanges, interchangeable, split rims
Front Tyre: 3.5 x 8″
Rear Tyre: 3.5 x 8″
Dry Weight: 60 kg / 132 lbs
Fuel Capacity: 5 L / 1.3 US gal
Consumption: 2.0 L/100 km / 50 km/l / 118 US mpg
Top Speed: 60 km/h / 37 mph
Colours: Silver, Metallic Green
Source: Wikipedia

The post Vespa PK50 (1946-47) appeared first on MotorcycleSpecifications.com.

]]> Vespa 150 S & P150X (1978-90) https://motorcyclespecifications.com/vespa-150-s-p150x-1978-90-specs/ Tue, 04 Apr 2023 00:13:02 +0000 https://motorcyclespecifications.com/?p=43643 The Vespa P150S/P150X motorcycle was produced from 1978 to 1990. It has a 149cc, two-stroke single cylinder engine with a compression of 8.2:1 and a Dell’Orto SI 20/20 D carburetor.

The post Vespa 150 S & P150X (1978-90) appeared first on MotorcycleSpecifications.com.

]]> The Vespa P150S/P150X motorcycle was produced from 1978 to 1990. It has a 149cc, two-stroke single cylinder engine with a compression of 8.2:1 and a Dell’Orto SI 20/20 D carburetor. The motorcycle is air cooled, forced and runs on a 1:50 fuel mixture. The ignition is via contact breaker and coil, with a kick start and 12V battery. The clutch is a wet, multiplate and the transmission is a 4 speed, grip-shift, constant mesh. The frame is pressed sheet steel and has a streamlined monocoque structure. The front suspension is a trail arm with a coil spring and damper, while the rear suspension is a coil spring with damper. The front and rear brakes are 125mm and 127mm drums respectively. The wheels are interchangeable with a front and rear tire size of 3.5 x 8 inches. The motorcycle has a length of 1740mm, width of 670mm, and a wheelbase of 1200mm. The dry weight is 98kg and it has a fuel capacity of 7.5L. The motorcycle has an average consumption of 2.1L/100km and an acceleration of 0-75km/h in 17.5 seconds. The top speed is 90km/h and it comes in blue, blue/green, silver, and white colours. Sources for this information include Wikipedia, Scooterhelp.com, and Scooterlounge.com.

Technical specifications:

Make Model: Vespa P150S / P150X

Year: 1978 – 90
Engine: Two stroke single cylinder,
Capacity: 149 cc / 9.1 cub in
Bore x Stroke: 57.8 x 57 mm
Compression: 8.2:1
Carburetor: Dell’Orto SI 20/20 D
Cooling: Air cooled, forced
Fuel Mixture: 1:50
Ignition: Contact breaker and coil
Starting: Kick start
Battery: 12V
Clutch: Wet, multiplate
Max Power: 5.5 kW / 7.5 hp @ 5750 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Gear Ratios: 1st 14.47 / 2nd 10.28 / 3rd 7.31 / 4th 5.36:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Trail arm with coil spring and damper
Rear Suspension: Coil spring with damper
Front Brakes: 125 mm drum
Rear Brakes: 127 mm drum
Wheels: Interchangeable
Front Tyre: 3.5 x 8″
Rear Tyre: 3.5 x 8″
Dimensions: Length: 1740 mm / 68.5 in Width: 670 mm / 26.4 in
Wheelbase: 1200 mm / 47.2 in
Dry Weight: 98 kg / 216 lbs
Fuel Capacity: 7.5 L / 2.0 US gal
Consumption average: 2.1 L/100 km / 48 km/l / 112 US mpg
Acceleration: 0 – 75 km/h / 47 mph: 17.5 sec
Top Speed: 90 km/h / 56 mph
Colours: Blue, Blue/Green, Silver, White
Sources: Wikipedia, Scooterhelp.com, Scooterlounge.com

The post Vespa 150 S & P150X (1978-90) appeared first on MotorcycleSpecifications.com.

]]> Vespa GTS 300 Super Sport SE (2012-16) https://motorcyclespecifications.com/vespa-gts-300-super-sport-se-2012-16-specs/ Mon, 03 Apr 2023 13:00:56 +0000 https://motorcyclespecifications.com/?p=43017 The Vespa GTS 300 Super Sport ABS is a motorcycle produced between 2012 and 2016. It has a four-stroke, single cylinder, SOHC engine with a capacity of 278 cc and

The post Vespa GTS 300 Super Sport SE (2012-16) appeared first on MotorcycleSpecifications.com.

]]> The Vespa GTS 300 Super Sport ABS is a motorcycle produced between 2012 and 2016. It has a four-stroke, single cylinder, SOHC engine with a capacity of 278 cc and a maximum power of 15.8 kW at 7500 rpm. The liquid cooled motorcycle has a belt final drive and a CVT with torque server transmission. Its front and rear suspension consists of hydraulic shock absorbers with adjustable preload, and its brakes are single 220 mm discs. The motorcycle has a length of 1930 mm, a width of 755 mm and a wheelbase of 1370 mm. It has a dry weight of 158 kg and can hold 9.2 liters of fuel. Its fuel consumption is averaged at 3.5 L/100 km, while its maximum speed tops out at 129 km/h. Overall, the Vespa GTS 300 Super Sport ABS is a lightweight, stylish and powerful motorcycle suitable for city and short-distance travel.

Technical specifications:

Make Model: Vespa GTS 300 Super Sport ABS

Year: 2012 – 16
Engine: Four strike single cylinder, SOHC, 4 valve
Capacity: 278 cc / 18.2 cub in
Bore x Stroke: 75 mm x 63 mm
Cooling: Liquid cooled
Lubrication: Wet sump, chain driven lube pump
Ignition: Electric
Starting: Electric
Clutch: Automatic, dry centrifuge with damper buffers
Max Power: 15.8 kW / 21.5 hp @ 7500 rpm
Max Torque: 22.3 Nm / 2.27 kgf-m / 16.45 ft/lb @ 5250 rpm
Transmission: CVT with torque server
Final Drive: Belt
Frame: Sheetmetal body with welded reinforcements
Front Suspension: Single arm, dual chamber hydraulic shock absorber with coaxial spring
Rear Suspension: Dual effect shock absorbers with adjustable preload
Front Brakes: Single 220 mm disc
Rear Brakes: Single 220 mm disc
Front Tyre: 110/70-R12″
Rear Tyre: 130/70-R12″
Dimensions: Length 1930 mm / 75.9 in Width 755 mm / 29.7 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 158 kg / 348 lbs
Fuel Capacity: 9.2 L / 2.4 US gal
Consumption Average: 3.5 L/100 km / 28 km/l / 67 US mpg
Top Speed: 129 km/h / 80 mph

The post Vespa GTS 300 Super Sport SE (2012-16) appeared first on MotorcycleSpecifications.com.

]]> Vespa ET4 50 (2000-05) https://motorcyclespecifications.com/vespa-et4-50-2000-05-specs/ Mon, 03 Apr 2023 02:14:05 +0000 https://motorcyclespecifications.com/?p=42424 The Vespa ET4 50 motorcycle was produced from 2000 to 2005, featuring a four-stroke, single-cylinder engine with a capacity of 49.3 cc and a compression ratio of 11.1:1, producing a

The post Vespa ET4 50 (2000-05) appeared first on MotorcycleSpecifications.com.

]]> The Vespa ET4 50 motorcycle was produced from 2000 to 2005, featuring a four-stroke, single-cylinder engine with a capacity of 49.3 cc and a compression ratio of 11.1:1, producing a maximum power of 2.5 kW at 6500 rpm. The engine is lubricated by a wet pump driven by a chain, feeding a carburetor from Weber or Dell’Orto or Mikuni 2-phase. The bike is air-cooled and forced, starting by kick-start and with an electronic capacitive ignition system. The transmission is CVT, and the clutch is automatic with a dry centrifugal system. The Vespa ET4 50 has a load-bearing pressed sheet steel frame, with hydraulic single shocks on the front and rear suspensions. The front brakes are a 200 mm disc, and the rear brakes are a 110 mm drum, while the wheels are pressed die-cast aluminum alloy. The bike has a seat height of 805 mm and a wet weight of 96 kg, with a fuel capacity of 9 L and a top speed of 45 km/h. It was available in White, Pearl white, Seafoam green, Blue, Dragon red, and Alabaster colors. Motorcycle.com reviewed the bike.

Technical specifications:

Make Model: Vespa ET4 50

Year: 2000 – 05
Engine: Four stroke, single cylinder
Capacity: 49.3 cc / 3.0 cub in
Bore x Stroke: 39 x 41.8 mm
Compression: 11.1:1
Lubrication: Wet pump, chain driven trochoidal pump
Carburetor: Weber / Dell’Orto / Mikuni 2-phase
Cooling: Air cooled, forced
Spark Plug: NGK CR9EB / NGK CR9EIX
Ignition: Electronic capacitive (CDI)
Starting: Kick start
Clutch: Automatic, dry centrifugal
Max Power: 2.5 kW / 3.4 hp @6500 rpm
Transmission: CVT
Final Drive: Belt
Frame: Loadbearing pressed sheet steel
Dimensions: Length: 1760 mm / 30.7 in Width: 700 mm / 27.6 in
Wheel Base: 1280 mm / 50.4 in
Front Suspension: Hydraulic single shock
Rear Suspension: Hydraulic single shock
Front Brakes: 200 mm disc
Rear Brakes: 110 mm drum
Wheels: Pressed die cast aluminium alloy
Front Tyre: 100/80-10″
Rear Tyre: 120/70-10″
Dimensions: Length: 1760 mm / 69.3 in Width: 670 mm / 26.4 in
Wheelbase: 1280 mm / 50.4 in
Seat Height: 805 mm / 31.7 in
Wet Weight: 96 kg / 212 lbs
Fuel Capacity: 9 L / 2.4 US gal
Top Speed: 45 km/h / 28 mph
Colours: White, Pearl white, Seafoam green, Blue, Dragon red, Alabaster
Review: Motorcycle.com

The post Vespa ET4 50 (2000-05) appeared first on MotorcycleSpecifications.com.

]]> Vespa ET2 50 (2001-05) https://motorcyclespecifications.com/vespa-et2-50-2001-05-specs/ Sun, 02 Apr 2023 06:15:01 +0000 https://motorcyclespecifications.com/?p=41320 The Vespa ET2 50 is a two-stroke, single cylinder motorcycle with a capacity of 49.3 cc and a compression ratio of 11:1. It features a Weber, Dell’Orto or Mikuni 2-phase

The post Vespa ET2 50 (2001-05) appeared first on MotorcycleSpecifications.com.

]]> The Vespa ET2 50 is a two-stroke, single cylinder motorcycle with a capacity of 49.3 cc and a compression ratio of 11:1. It features a Weber, Dell’Orto or Mikuni 2-phase carburetor and automatic mixing. The engine has a max power of 3 kW at 7500 rpm and a max torque of 4.4 Nm at 6500 rpm. The transmission is a centrifugal automatic gearbox, and the final drive is a belt. The frame is a loadbearing pressed sheet steel and it has front and rear hydraulic single shock suspension. The front brakes are a 200 mm disc and the rear brakes are a 110 mm drum. It has pressed die cast aluminum alloy wheels with a front tire size of 100/80-10″ and a rear tire size of 120/70-10″. The motorcycle is 1760 mm in length, 670 mm in width and has a wheelbase of 1280 mm. It has a seat height of 805 mm and a wet weight of 92 kg. The fuel capacity is 9 L and it has a consumption average of 3.6 L/100 km. The top speed is 45 km/h and it comes in various colors such as white, pearl white, seafoam green, blue, dragon red, and alabaster. According to Motorcycle.com, the Vespa ET2 50 is a trustworthy and practical scooter with a smooth and comfortable ride.

Technical specifications:

Make Model: Vespa ET2 50

Year: 2001 – 05
Engine: Two stroke, single cylinder
Capacity: 49.3 cc / 3.0 cub in
Bore x Stroke: 40 x 39.3 mm
Compression Ratio: 11:1
Mixture: Automatic mixing
Carburetor: Weber / Dell’Orto / Mikuni 2-phase
Cooling: Air cooled, forced
Ignition: Electric
Starting: Kick start
Clutch: Automatic, dry centrifugal
Max Power: 3 kW / 5.1 hp @ 7500 rpm
Max Torque: 4.4 Nm / 0,45 kgf-m / 3.2 ft/lb @ 6500 rpm
Transmission: Centrifugal automatic gearbox
Final Drive: Belt
Frame: Loadbearing pressed sheet steel
Front Suspension: Hydraulic single shock
Rear Suspension: Hydraulic single shock
Front Brakes: 200 mm disc
Rear Brakes: 110 mm drum
Wheels: Pressed die cast aluminium alloy
Front Tyre: 100/80-10″
Rear Tyre: 120/70-10″
Dimensions: Length: 1760 mm / 69.3 in Width: 670 mm / 26.4 in
Wheelbase: 1280 mm / 50.4 in
Seat Height: 805 mm / 31.7 in
Wet Weight: 92 kg / 203 lbs
Fuel Capacity: 9 L / 2.4 US gal
Consumption average: 3.6 L/100 km / 28 km/l / 65 US mpg
Top Speed: 45 km/h / 28 mph
Colours: White, Pearl white, Seafoam green, Blue, Dragon red, Alabaster
Review: Motorcycle.com

The post Vespa ET2 50 (2001-05) appeared first on MotorcycleSpecifications.com.

]]> Vespa PK50 (1947) https://motorcyclespecifications.com/vespa-pk50-1947-specs/ Sat, 01 Apr 2023 21:59:03 +0000 https://motorcyclespecifications.com/?p=40861 The Vespa PK50 is a motorcycle with a four stroke, single cylinder engine and a capacity of 98 cc / 6 cub in. It has a mixture of 1:50 and

The post Vespa PK50 (1947) appeared first on MotorcycleSpecifications.com.

]]> The Vespa PK50 is a motorcycle with a four stroke, single cylinder engine and a capacity of 98 cc / 6 cub in. It has a mixture of 1:50 and a compression ratio of 8.7:1, with a Dell’Orto T2 17 carburettor and air cooled forced cooling system. It uses a flywheel magneto coil ignition and a kick start, with multiplate steel discs in an oil bath clutch. The motorcycle has a maximum power of 4.4 kW / 6 hp @ 6000rpm, with a three speed transmission and direct drive final drive. The frame is made of pressed sheet steel with a streamlined monocoque structure, and uses coil springs and caplipers shock absorber for front suspension, and a leaf spring for rear suspension. It has drum brakes for both the front and rear, with interchangeable, split rim pressed steel flanges for the wheels. The motorcycle has a dry weight of 73 kg / 161 lbs and a fuel capacity of 5.2 L / 1.3 US gal. It has a top speed of 100 km/h / 62 mph and comes in the color red. The information is sourced from Allinvespa.blogspot.com.

Technical specifications:

Make Model: Vespa 98 Corsa

Year: 1947
Engine: Four stroke, single cylinder
Capacity: 98 cc / 6 cub in
Bore and Stroke: 50 x 50 mm
Mixture: 1:50
Compression Ratio: 8.7:1
Carburettor: Dell’Orto T2 17
Cooling: Air cooled, forced
Battery: 6V
Induction: Rotary valve
Ignition: Flywheel magneto coil
Starting: Kick start
Spark Plug: Bosch W340 T1/T or /U, Champion L86
Clutch: Multiplate steel discs in oil bath
Max Power: 4.4 kW / 6 hp @ 6000rpm
Transmission: 3 speed
Final Drive: Direct drive
Frame: Pressed sheet steel with streamlined monocoque structure
Front Suspension: Coil springs and caplipers shock absorber
Rear Suspension: Leaf spring
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Pressed steel flanges, interchangeable, split rims
Front Tyre: 3.5 x 8″
Rear Tyre: 3.5 x 8″
Dry Weight: 73 kg / 161 lbs
Fuel Capacity: 5.2 L / 1.3 US gal
Top Speed: 100 km/h / 62 mph
Colours: Red
Source: Allinvespa.blogspot.com

The post Vespa PK50 (1947) appeared first on MotorcycleSpecifications.com.

]]> Vespa PK50 (1963-84) https://motorcyclespecifications.com/vespa-pk50-1963-84-specs/ Sat, 01 Apr 2023 01:00:59 +0000 https://motorcyclespecifications.com/?p=39692 The Vespa PK50 motorcycle was produced between 1963 and 1984 and came in three different models, the Vespa 90, 90 SS, and 90 Racer. The engine is a two-stroke, single-cylinder

The post Vespa PK50 (1963-84) appeared first on MotorcycleSpecifications.com.

]]> The Vespa PK50 motorcycle was produced between 1963 and 1984 and came in three different models, the Vespa 90, 90 SS, and 90 Racer. The engine is a two-stroke, single-cylinder with a capacity of 88.5cc and a compression ratio of 8.7:1. The carburetor is a Dell’Orto SHB 16/10 and it uses a forced air cooling system. Ignition is provided by a flywheel magneto coil and starting is done through a kickstart. Its clutch is oil bath, multi-plate and it has a maximum power of 4.4 kW or 6 hp at 6000rpm. It has three gears (4 gears for the SS and Racer) and a direct drive for the final drive. The Vespa PK50’s frame is pressed sheet steel with streamlined monocoque structure and its suspension features a front coil spring with hydraulic shock absorber and a rear coil spring with hydraulic shock absorber as well. The front and rear brakes are 125mm and 150mm drums, respectively. The Vespa PK50 has pressed steel flanges for wheels which are interchangeable and split rims. Its measurements are 1665 mm in length, 670 mm in width, and 1015 mm in height with a wheelbase of 1180 mm and a ground clearance of 225 mm. The scooter has a dry weight of 73 kg and a fuel capacity of 5.2 L with a reserved fuel capacity of 0.7 L. It has a fuel consumption of 1.8 L/100 km and a top speed of 93 km/h. The Vespa PK50 was available in blue and red colors. This information comes from Scooterhelp.com and ve-uk.com.

Technical specifications:

Make Model: Vespa 90, 90 SS and 90 Racer

Year: 1963-84
Engine: Two stroke, single cylinder
Capacity: 88.5 cc / 5.4 cub in
Bore and Stroke: 47 x 51 mm
Mixture: 1:50
Compression Ratio: 8.7:1
Carburettor: Dell’Orto SHB 16/10
Cooling: Forced air cooled
Battery: 6V
Induction: Rotary valve
Ignition: Flywheel magneto coil
Starting: Kick start
Spark Plug: Bosch W340 T1/T or /U, Champion L86
Clutch: Oil bath, multi plate
Max Power: 4.4 kW / 6 hp @ 6000rpm
Transmission: 3 gears (4 gears for the SS and Racer)
Gear ratios for SS and Racer: 1st 14.74 / 2nd 9.80 / 3rd 7.06 / 4th 5.31:1
Final Drive: Direct drive
Frame: Pressed sheet steel with streamlined monocoque structure
Front Suspension: Coil spring and hydraulic shock absorber
Rear Suspension: Coil spring and hydraulic shock absorber
Front Brakes: 125 mm drum
Rear Brakes: 150 mm drum
Wheels: Pressed steel flanges, interchangeable, split rims
Front Tyre: 3 x 10″
Rear Tyre: 3 x 10″
Dimensions: Length: 1665 mm / 65.6 in Width: 670 mm / 26.4 in Height: 1015 mm / 40.0 in
Wheelbase: 1180 mm / 46.5 in
Ground Clearance: 225 mm / 8.9 in.
Turning Radius: 1650 mm / 64.9 in
Dry Weight: 73 kg / 161 lbs
Fuel Capacity: 5.2 L / 1.3 US gal
Reserve: 0.7 L / 0.18 US gal
Consumption: 1.8 L/100 km / 55 km/l / 130 US mpg
Top Speed: 93 km/h / 57.8 mph
Colours: Blue, Red
Source: Scooterhelp.com, ve-uk.com

The post Vespa PK50 (1963-84) appeared first on MotorcycleSpecifications.com.

]]> BMW F 800ST (1948-50) https://motorcyclespecifications.com/bmw-f-800st-1948-50-specs/ Fri, 31 Mar 2023 12:12:55 +0000 https://motorcyclespecifications.com/?p=38996 Unfortunately, no content about BMW F 800ST (1948-50) motorcycle has been provided for us to summarize. Please provide the necessary information for me to assist you better. Technical specifications: Continue

The post BMW F 800ST (1948-50) appeared first on MotorcycleSpecifications.com.

]]> Unfortunately, no content about BMW F 800ST (1948-50) motorcycle has been provided for us to summarize. Please provide the necessary information for me to assist you better.

Technical specifications:

Continue reading

The post BMW F 800ST (1948-50) appeared first on MotorcycleSpecifications.com.

]]> Vespa 946 Emporio Armani (2015) https://motorcyclespecifications.com/vespa-946-emporio-armani-2015-specs/ Fri, 31 Mar 2023 08:53:07 +0000 https://motorcyclespecifications.com/?p=38806 The Vespa 946 Emporio Armani (2015) motorcycle is a limited edition production model with only 100 units made. It has a four-stroke, single-cylinder engine with a capacity of 155 cc

The post Vespa 946 Emporio Armani (2015) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 946 Emporio Armani (2015) motorcycle is a limited edition production model with only 100 units made. It has a four-stroke, single-cylinder engine with a capacity of 155 cc and forced air cooling system. The lubrication is wet sump, and it uses a port-injected fuel injection system. The ignition is electronic, and it has an electric starter. The clutch is automatic, and the transmission is a CVT twist-and-go type. The final drive is belt-driven. The metal body of the motorcycle has welded reinforcements and aluminum elements, and the front suspension is a single link arm with a coil spring and dual-action hydraulic shock absorber. The rear suspension is a coil spring with adjustable preload and a mono-shock with a progressive lever system. The braking system is ABS two-channel, with an ASR system, and both the front and rear brakes have 220mm discs. The tires are 120/70-12 in the front and 130/70-12 in the rear. The dimensions of the motorcycle are 1965 mm x 730 mm x 1405 mm, with a seat height of 805 mm. The fuel capacity is 8.5 liters, and the expected consumption is 2.0 L/100 km, giving an estimated range of 400 km. The top speed of the motorcycle is 93 km/h.

Technical specifications:

Make Model: Vespa 946 Emporio Armani

Year: 2015
Production: Limited to 100 units
Engine: Four stroke, single cylinder, catalytic converter, EFI, SOHC, 3 valves
Capacity: 155 cc / 9.5 cub in
Cooling: Forced air cooling system
Lubrication: Wet sump
Fuel System: Port Injected injection
Ignition: Electronic
Starting: Electric
Clutch: Automatic, dry centrifuge with vibration dampets
Transmission: CVT, twist and go
Final Drive: Belt
Frame: Metal body with welded reinforcements and aluminium elements
Front Suspension: Single link arm with coil spring and dual-action hydraulic shock absorber
Rear Suspension: Coil spring with adjustable preload, mono shock with progressive lever system
Braking System: ABS, 2 channels, with ASR system
Front Brakes: 220 mm disc
Rear Brakes: 220 mm disc
Front Tyre: 120/70-12 in
Rear Tyre: 130/70-12 in
Dimensions: Length: 1965 mm / 77.3 in Width: 730 mm / 28.7 in
Wheelbase: 1405 mm / 55.3 in
Seat Height: 805 mm / 31.6 in
Fuel Capacity: 8.5 Litres / 2.2 US gal
Consumption (up to): 2.0 L/100 km / 50 km/l / 117 US mpg
Top Speed: 93 km/h / 57 mph

The post Vespa 946 Emporio Armani (2015) appeared first on MotorcycleSpecifications.com.

]]> Vespa GTS 300 IE (2009-12) https://motorcyclespecifications.com/vespa-gts-300-ie-2009-12-specs/ Fri, 31 Mar 2023 06:58:10 +0000 https://motorcyclespecifications.com/?p=38700 The Vespa GTS 300 IE was produced from 2009-2012 and has a four-stroke single cylinder engine with a capacity of 278cc. It is liquid cooled with wet sump lubrication and

The post Vespa GTS 300 IE (2009-12) appeared first on MotorcycleSpecifications.com.

]]> The Vespa GTS 300 IE was produced from 2009-2012 and has a four-stroke single cylinder engine with a capacity of 278cc. It is liquid cooled with wet sump lubrication and electric ignition. The clutch is automatic with dry centrifugal damper buffers. It produces a maximum power of 15.8 kW/21.5 hp at 7500 rpm and a maximum torque of 22.3 Nm/2.27 kgf-m/16.45 ft/lb at 5250 rpm. The transmission is CVT with a final drive belt. The frame is a sheet metal body with welded reinforcements. It has a single arm front suspension and dual effect shock absorbers with adjustable preload at the rear. The front and rear brakes are both single 220 mm discs. The front and rear tires are 110/70-R12″ and 130/70-R12″ respectively. The dimensions are 1930 mm in length, 755 mm in width, and 1370 mm wheelbase with a seat height of 790 mm. It has a dry weight of 158 kg and a fuel capacity of 9.2 L.

Technical specifications:

Make Model: Vespa GTS 300 IE

Year: 2009 – 12
Engine: Four stroke single cylinder, SOHC, 4 valve
Capacity: 278 cc / 18.2 cub in
Bore x Stroke: 75 mm x 63 mm
Cooling: Liquid cooled
Lubrication: Wet sump, chain driven lube pump
Ignition: Electric
Starting: Electric
Clutch: Automatic, dry centrifuge with damper buffers
Max Power: 15.8 kW / 21.5 hp @ 7500 rpm
Max Torque: 22.3 Nm / 2.27 kgf-m / 16.45 ft/lb @ 5250 rpm
Transmission: CVT with torque server
Final Drive: Belt
Frame: Sheetmetal body with welded reinforcements
Front Suspension: Single arm, dual chamber hydraulic shock absorber with coaxial spring
Rear Suspension: Two dual effect shock absorbers with adjustable preload
Front Brakes: Single 220 mm disc
Rear Brakes: Single 220 mm disc
Front Tyre: 110/70-R12″
Rear Tyre: 130/70-R12″
Dimensions: Length: 1930 mm / 75.9 in Width: 755 mm / 29.7 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 158 kg / 348 lbs
Fuel Capacity: 9.2 L / 2.4 US gal

The post Vespa GTS 300 IE (2009-12) appeared first on MotorcycleSpecifications.com.

]]> Vespa GTV 250 (2007) https://motorcyclespecifications.com/vespa-gtv-250-2007-specs/ Fri, 31 Mar 2023 03:56:00 +0000 https://motorcyclespecifications.com/?p=38536 The Vespa GTV 250 (2007) is a classic styled motorcycle with a liquid-cooled four-stroke single cylinder, SOHC, 4 valve engine that has a capacity of 244 cc. It has a

The post Vespa GTV 250 (2007) appeared first on MotorcycleSpecifications.com.

]]> The Vespa GTV 250 (2007) is a classic styled motorcycle with a liquid-cooled four-stroke single cylinder, SOHC, 4 valve engine that has a capacity of 244 cc. It has a maximum power of 16.2 kW / 22 hp @ 8250 rpm and a max torque of 20.2 Nm / 2.06 kgf-m / 14.9 ft/lb @ 6500 rpm. The transmission is CVT automatic, twist and go with a belt final drive. The frame is made of pressed sheet steel with a streamlined monocoque structure. The suspension includes a single arm with dual-acting hydraulic shock and co-axial spring in the front and two double-action shock absorbers with adjustable pre-load in the rear. The brakes are single 220 mm stainless steel discs on both the front and rear wheels. It has cast alloy wheels with a front tyre size of 120/70-12 and a rear size of 130/70-12. The dimensions of the motorcycle include a length of 1930 mm / 76.0 in, a width of 755 mm / 29.7 in, and a wheelbase of 1395 mm / 54.9 in. Its dry weight is 138 kg / 304 lbs and its wet weight is 151 kg / 333 lbs. The fuel capacity is 9.2 Litres / 2.4 US gal with a reserve of 2.0 L / 0.53 US gal. It has an average fuel consumption of 2.6 L/100 km / 39 km/l / 92 US mpg and a top speed of 122 km/h / 76 mph.

Technical specifications:

Make Model: Vespa GTV 250

Year: 2007 –
Engine: Four stroke single cylinder, SOHC, 4 valve
Capacity: 244 cc / 14.9 cub in
Bore x Stroke: 72 x 60 mm
Cooling: Liquid cooled
Lubrication: Wet sump
Ignition: Electronic
Starting: Electric
Clutch: Wet, multiplate
Max Power: 16.2 kW / 22 hp @ 8250 rpm
Max Torque: 20.2 Nm / 2.06 kgf-m / 14.9 ft/lb @ 6500 rpm
Transmission: CVT, twist and go
Final Drive: Belt
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Single arm with dual acting hydraulic shock and co-axial sping
Rear Suspension: 2 x double action shock absorbers with adjustable pre-load
Front Brakes: Single 220 mm stainless steel disc
Rear Brakes: Single 220 mm stainless steel disc
Wheels: Cast alloy
Front Tyre: 120/70-12
Rear Tyre: 130/70-12
Dimensions: Length 1930 mm / 76.0 in Width 755 mm / 29.7 in
Wheelbase: 1395 mm / 54.9 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 138 kg / 304 lbs
Wet Weight: 151 kg / 333 lbs
Fuel Capacity: 9.2 Litres / 2.4 US gal
Reserve: 2.0 L / 0.53 US gal
Consumption Average: 2.6 L/100 km / 39 km/l / 92 US mpg
Top Speed: 122 km/h / 76 mph

The post Vespa GTV 250 (2007) appeared first on MotorcycleSpecifications.com.

]]> Vespa LX50 4T (2006-12) https://motorcyclespecifications.com/vespa-lx50-4t-2006-12-specs/ Thu, 30 Mar 2023 18:57:03 +0000 https://motorcyclespecifications.com/?p=38030 The Vespa LX 50 4T was manufactured from 2006-2012 with a four-stroke, single-cylinder, 4 valve, 49.3 cc engine with a compression ratio of 11.1:1. It has a wet pump, chain-driven

The post Vespa LX50 4T (2006-12) appeared first on MotorcycleSpecifications.com.

]]> The Vespa LX 50 4T was manufactured from 2006-2012 with a four-stroke, single-cylinder, 4 valve, 49.3 cc engine with a compression ratio of 11.1:1. It has a wet pump, chain-driven trochoidal pump for lubrication and is air-cooled, forced for cooling. The ignition is electronic capacitive (CDI) and has a kick-start. The automatic, dry centrifugal clutch produces a max power of 3.1 kW / 4.3 hp @ 8500 rpm and max torque of 3.5 Nm / 0.4 kgf-m / 2.6 ft/lb @ 6500 rpm. The CVT has a torque server which provides the belt final drive. The Vespa is designed with a load-bearing pressed sheet steel frame with single arm front suspension with a helical spring and dual effect hydraulic single shock absorber and a coil spring and dual effect single shock absorber for the rear suspension. The front brakes have a 200mm disc while the rear brakes have a 110mm drum. The wheels are made from pressed die-cast aluminum alloy with the front tire 110/70-11″ and the rear tire 120/70-10″. Overall dimensions are length: 1755mm/69.1in, width: 740mm/29.1in, wheelbase: 1280mm/50.4in and seat height: 775mm/30.5in with a wet weight of 102kg/225lbs. It has a fuel capacity of 8.6 L/2.3 US gal with a fuel consumption of 2.7 L/100 km / 37 km/l / 87 mpg and a top speed of 63 km/h / 39 mph. Available colors are light blue, midnight blue, white, maroon, dragon red, and volcano black.

Technical specifications:

Make Model: Vespa LX 50 4T

Year: 2006 – 12
Engine: Four Stroke, single cylinder, 4 valve
Capacity: 49.3 cc / 3.0 cub in
Bore x Stroke: 39 x 41 mm
Compression: 11.1:1
Lubrication: Wet pump, chain driven trochoidal pump
Cooling: Air cooled, forced
Spark Plug: NGK CR9EB / NGK CR9EIX
Ignition: Electronic capacitive (CDI)
Starting: Kick start
Clutch: Automatic, dry centrifugal
Max Power: 3.1 kW / 4.3 hp @ 8500 rpm
Max Torque: 3.5 Nm / 0.4 kgf-m / 2.6 ft/lb @ 6500 rpm
Transmission: CVT with torque server
Final Drive: Belt
Frame: Loadbearing pressed sheet steel
Dimensions: Length: 1755 mm / 30.4 in Width: 740 mm / 29.1 in
Wheel Base: 1290 mm / 50.7 in
Seat height: 775 mm / 30.5 in
Front Suspension: Single arm with helical spring and dual effect hydraulic single shock absorber
Rear Suspension: Coil spring and dual effect single shock absorber
Front Brakes: 200 mm disc
Rear Brakes: 110 mm drum
Wheels: Pressed die cast aluminium alloy
Front Tyre: 110/70-11″
Rear Tyre: 120/70-10″
Dimensions: Length: 1755 mm / 69.1 in Width: 740 mm / 29.1 in
Wheelbase: 1280 mm / 50.4 in
Seat Height: 775 mm / 30.5 in
Wet Weight: 102 kg / 225 lbs
Fuel Capacity: 8.6 L / 2.3 US gal
Fuel Consumption: 2.7 L/100 km / 37 km/l / 87 mpg
Top Speed: 63 km/h / 39 mph
Colours: Light blue, Midnight blue, White, Maroon, Dragon Red, Volcano Black

The post Vespa LX50 4T (2006-12) appeared first on MotorcycleSpecifications.com.

]]> Vespa 125 GTR (1968-78) https://motorcyclespecifications.com/vespa-125-gtr-1968-78-specs/ Thu, 30 Mar 2023 18:21:02 +0000 https://motorcyclespecifications.com/?p=37998 The Vespa 125 GTR, produced from 1968 to 1978, had a two-stroke, single-cylinder engine with a capacity of 123.4cc/7.5 cub in, producing a maximum power of 4.6 kW/6.3 hp at

The post Vespa 125 GTR (1968-78) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 125 GTR, produced from 1968 to 1978, had a two-stroke, single-cylinder engine with a capacity of 123.4cc/7.5 cub in, producing a maximum power of 4.6 kW/6.3 hp at 5000 rpm. It had a Dell’Orto SHB 16/16 carburetor, disc valve induction, and contact breaker and coil ignition. With a four-speed grip-shift, constant mesh transmission, it had a direct drive final drive. The frame was a pressed sheet steel, streamlined monocoque structure. The Vespa 125 GTR had front and rear drum brakes, and interchangeable wheels. The dimensions were 1795 mm/70.7 in in length, 710 mm/30.0 in in width, and had a wheelbase of 1220 mm/48.0 in. It weighed 90 kg/198 lbs, and had a fuel capacity of 7.7 L/2.0 US gal. With an average consumption of 2 L/100 km/50 km/l/117 US mpg, it had a top speed of 92 km/h/57 mph. The Vespa 125 GTR was available in blue, China blue, coral red, metallic moon white, and polaris grey. A total of 45,658 units were produced.

Technical specifications:

Make Model: Vespa 125 GTR

Year: 1968 – 78
Production: 45 658 units
Engine: Two stroke, ingle cylinder
Capacity: 123.4 cc / 7.5 cub in
Bore x Stroke: 52.5 x 57 mm
Compression: 7.3:1
Carburetor: Dell’Orto SHB 16/16
Cooling: Air cooled, centrifugal fan
Fuel Mixture: 1:50
Induction: Disc valve
Ignition: Contact breaker & coil
Starting: Kick start
Battery: 6V
Clutch: Wet, multiplate
Max Power: 4.6 kW / 6.3 hp @ 5000 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Gear Ratios: 1st 15.46 / 2nd 10.79 / 3rd 7.69 / 4th 5.49:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Interchangeable
Front Tyre: 3.5 x 10″
Rear Tyre: 3.5 x 10″
Dimensions: Length: 1795 mm / 70.7 in Width: 710 mm / 30.0 in
Wheelbase: 1220 mm / 48.0 in
Dry Weight: 90 kg / 198 lbs
Fuel Capacity: 7.7 L / 2.0 US gal
Consumption average: 2 L/100 km / 50 km/l / 117 US mpg
Top Speed: 92 km/h / 57 mph
Colours: Blue, China Blue, Coral Red, Metallic Moon White, Polaris Grey
Sources: Wikipedia, Vespafan.ch

The post Vespa 125 GTR (1968-78) appeared first on MotorcycleSpecifications.com.

]]> Vespa LX 150 IE (2013-14) https://motorcyclespecifications.com/vespa-lx-150-ie-2013-14-specs/ Thu, 30 Mar 2023 15:47:00 +0000 https://motorcyclespecifications.com/?p=37854 The Vespa LX150 IE and S150 IE motorcycles were produced between 2013-14. They have a four stroke, single cylinder, 3 valve engine with a capacity of 150cc. The cooling system

The post Vespa LX 150 IE (2013-14) appeared first on MotorcycleSpecifications.com.

]]> The Vespa LX150 IE and S150 IE motorcycles were produced between 2013-14. They have a four stroke, single cylinder, 3 valve engine with a capacity of 150cc. The cooling system is ram air and lubrication is wet sump. The ignition and starting are both electric and the clutch is automatic. With a max power of 8.7 kW and max torque of 11.5 Nm, these bikes have a CVT with torque server and a belt final drive. The frame is sheet metal and has welded reinforcements. Suspension includes a single-sided training link with hydraulic shock absorber in the front and a hydraulic shock absorber in the rear. Brakes are 220 mm disc in the front and 110 mm in the rear, and the tires are 110/70-R11″ and 120/70-R10″. The bikes have a length of 1755 mm, width of 740 mm, wheelbase of 1290 mm, seat height of 785 mm, and dry weight of 102 kg. Fuel capacity is 8.2L and the consumption average is 3.3L/100 km. Top speed is 95 km/h and the bikes come in colors such as dragon red, Montebianco white, midnight blue, volcano black, and aquamarine. Sources and reviews for this information include Motorcycle.com and Unbox.ph.

Technical specifications:

Make Model: Vespa LX150 IE and S150 IE

Year: 2013 – 14
Engine: Four stroke, single cylinder,SOHC, 3 valve
Capacity: 150 cc / 9.2 cub in
Bore x Stroke: 62.6 mm x 48.6 mm
Cooling: Ram air cooling system
Lubrication: Wet sump
Ignition: Electric
Starting: Electric
Clutch: Automatic, dry centrifuge with damper buffers
Max Power (at shaft): 8.7 kW / 11.8 hp @ 8000 rpm
Max Torque: 11.5 Nm / 1.17 kgf-m / 8.48 lb-ft @ 8000 rpm
Transmission: CVT with torque server
Final Drive: Belt
Frame: Sheetmetal body with welded reinforcements
Front Suspension: Single sided training link with hydraulic shock absorber
Rear Suspension: Hydraulic shock absorber
Front Brakes: 220 mm disc
Rear Brakes: 110 mm disc
Front Tyre: 110/70-R11″
Rear Tyre: 120/70-R10″
Dimensions: Length: 1755 mm / 69.0 in Width: 740 mm / 29.1 in
Wheelbase: 1290 mm / 50.7 in
Seat Height: 785 mm / 30.9 in
Dry Weight: 102 kg / 225 lbs
Fuel Capacity: 8.2 L / 2.2 US gal
Consumption average: 3.3 L/100 km / 30 km/l / 72 US mpg
Top Speed: 95 km/h / 59 mph
Colours: Dragon red, Montebianco white, Midnight blue, Vocano black, Aquammarine
Sources and Reviews: Motorcycle.com, Unbox.ph

The post Vespa LX 150 IE (2013-14) appeared first on MotorcycleSpecifications.com.

]]> Vespa PX 125 T5 (1965-83) https://motorcyclespecifications.com/vespa-px-125-t5-1965-83-specs/ Thu, 30 Mar 2023 08:52:06 +0000 https://motorcyclespecifications.com/?p=37466 The Vespa PX 125 T5 was a popular motorcycle model produced between 1965 and 1983, with a total production of 144,000 units. It was powered by a two-stroke, single-cylinder engine

The post Vespa PX 125 T5 (1965-83) appeared first on MotorcycleSpecifications.com.

]]> The Vespa PX 125 T5 was a popular motorcycle model produced between 1965 and 1983, with a total production of 144,000 units. It was powered by a two-stroke, single-cylinder engine with a capacity of 121.2 cc and a maximum power output of 4.1 kW at 5500 rpm. The motorcycle had a 4-speed, grip-shift, constant mesh transmission and a direct drive final drive. It also featured a pressed sheet steel frame with a streamlined monocoque design, front and rear elastic suspension with coil springs and hydraulic shock absorbers, and drum brakes. The Vespa PX 125 T5 had a dry weight of 73 kg and a fuel capacity of 5.5 L, with an average fuel consumption of 2 L/100 km and a top speed of 85 km/h. The motorcycle was available in white, silver, and blue colors.

Technical specifications:

Make Model: Vespa 125 Primavera

Year: 1965 – 83
Production: 144 000 units
Engine: Two stroke, single cylinder
Capacity: 121.2 cc / 7.4 cub in
Bore x Stroke: 55 x 51 mm
Carburetor: Dell’Orto SHB 16/16
Cooling: Air cooled, centrifugal fan
Fuel Mixture: 1:50
Starting: Kick start
Battery: 6V
Clutch: Multiplate
Max Power: 4.1 kW / 5.6 hp @ 5500 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Elastic with coil spring and hydraulic shock
Rear Suspension: Elastic with coil spring and hydraulic shock
Front Brakes: Drum
Rear Brakes: Drum
Wheels: Interchangeable
Front Tyre: 3.0 x 10″
Rear Tyre: 3.0 x 10″
Dry Weight: 73 kg / 161 lbs
Fuel Capacity: 5.5 L / 1.5 US gal
Consumption average: 2 L/100 km / 50 km/l / 117 US mpg
Top Speed: 85 km/h / 53 mph
Colours: White, Silver, Blue
Sources: Wikipedia, Vespafan.ch

The post Vespa PX 125 T5 (1965-83) appeared first on MotorcycleSpecifications.com.

]]> Vespa P 125 ETS (1984-85) https://motorcyclespecifications.com/vespa-p-125-ets-1984-85-specs/ Thu, 30 Mar 2023 05:16:00 +0000 https://motorcyclespecifications.com/?p=37260 The Vespa P 125 ETS was produced from 1984-1985 with a total of 11,711 units being made. It was powered by a 121.2cc single-cylinder, two-stroke engine with a compression ratio

The post Vespa P 125 ETS (1984-85) appeared first on MotorcycleSpecifications.com.

]]> The Vespa P 125 ETS was produced from 1984-1985 with a total of 11,711 units being made. It was powered by a 121.2cc single-cylinder, two-stroke engine with a compression ratio of 9.5:1 and a Dell’Orto carburetor. It had electronic ignition and a kick start, and used a wet, multiplate clutch. The maximum power output was 6.2 kW at 6,000 rpm. The transmission was a 4-speed constant mesh with grip-shift and a direct drive final gear. The frame was a streamlined monocoque structure made from pressed sheet steel. The brakes were 150mm drums in the front and rear, and the wheels were interchangeable with 3.0 x 10″ tires. The P 125 ETS had a length of 1680 mm, width of 700 mm, and height of 1070 mm with a wheelbase of 1180 mm and a ground clearance of 252 mm. Its dry weight was 85 kg, and it had a fuel capacity of 6.0 L with a 1.2 L reserve. Its fuel consumption average was 2.1L/100km, and its top speed was 97km/h. It was available in red, blue, and black.

Technical specifications:

Make Model: Vespa P 125 ETS

Year: 1984 – 85
Production: 11 711 units
Engine: Two strike, Single cylinder,
Capacity: 121.2 cc / 7.4 cub in
Bore x Stroke: 55 x 51 mm
Compression: 9.5:1
Carburetor: Dell’Orto SHBC 20/20L
Cooling: Air cooled, centrifugal fan
Fuel Mixture: 1:50
Ignition: Electronic
Starting: Kick start
Spark Plug: NGK BR7HS
Battery: 12V AC
Clutch: Wet, multiplate
Max Power: 6.2 kW / 8,6 hp @ 6000 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Gear Ratios: 1st 14.74 / 2nd 19.80 / 3rd 7.06 / 4th 5.31:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Brakes: 150 mm drum
Rear Brakes: 150 mm drum
Wheels: Interchangeable
Front Tyre: 3.0 x 10″
Rear Tyre: 3.0 x 10″
Dimensions: Length: 1680 mm / 66.1 in Width: 700 mm / 27.6 in Height: 1070 mm / 42.1 in
Wheelbase: 1180 mm / 46.5 in
Ground Clearance: 252 mm / 9.9 in
Dry Weight: 85 kg / 187 lbs
Fuel Capacity: 6.0 L / 1.6 US gal
Reserve: 1.2 L / 0.3 US gal
Consumption average: 2.1 L/100 km / 48 km/l / 111 US mpg
Top Speed: 97 km/h / 62 mph
Colours: Red, Blue, Black
Sources: Vespaclub.co.uk

The post Vespa P 125 ETS (1984-85) appeared first on MotorcycleSpecifications.com.

]]> Vespa P200E (1977-82) https://motorcyclespecifications.com/vespa-p200e-1977-82-specs/ Thu, 30 Mar 2023 05:12:14 +0000 https://motorcyclespecifications.com/?p=37256 The Vespa P200E (1977-82) is a classic and popular scooter from Italy. It has a two single cylinder engine with a capacity of 198 cc and a compression of 9.8:1.

The post Vespa P200E (1977-82) appeared first on MotorcycleSpecifications.com.

]]> The Vespa P200E (1977-82) is a classic and popular scooter from Italy. It has a two single cylinder engine with a capacity of 198 cc and a compression of 9.8:1. The carburetor is Dell’Orto SI 24/24 E, and it has a disc valve induction system and electronic ignition, with a starting mechanism of kick start. Its battery is 12V 9Ah, and it uses NGK-B6ES spark plugs. The clutch is a wet, multiplate one. The max power of this scooter is 9.2 kW / 12.5 hp at 5700 rpm. It comes with a 4-speed, grip-shift, constant mesh transmission system and has wheel ratios of 1st 13.42 / 2nd 9.13 / 3rd 6.32 / 4th 4.71:1. The final drive is a direct one. The body frame is made from pressed sheet steel, with a streamlined monocoque structure. The front and rear suspensions use coil spring with hydraulic shock absorber, double effect, and the braking system comprises 125mm drum for the front and 127mm drum for the rear. The wheels are interchangeable, split rims, while the front and rear tires are both 3.5 x 10”. The dimensions are length: 1760 mm / 69.3 in, width: 695 mm / 27.3 in, and height: 1110 mm / 43.7 in, while the wheelbase is 1235 mm / 48.7 in. The dry weight of this scooter is 108 kg / 238 lbs, and it has a fuel capacity of 8 L / 2 US gal, with a reserve of 2.1 L / 0.55 US gal. The consumption average is 3 L/100 km / 33 km/l / 78 US mpg, with a top speed of 110 km/h / 68 mph. The available colors for this scooter are Rosso red, Charcoal, and Silver.

Technical specifications:

Make Model: Vespa 200E and 200X

Year: 1977 – 82
Engine: Two single cylinder,
Capacity: 198 cc / 12 cub in
Bore x Stroke: 66.5 x 57 mm
Compression: 9.8:1
Carburetor: Dell’Orto SI 24/24 E
Cooling: Air cooled, forced
Fuel Mixture: 1:50
Induction: Disc valve
Ignition: Electronic
Starting: Kick start
Battery: 12V 9Ah
Spark Plug: NGK – B6ES
Clutch: Wet, multiplate
Max Power: 9.2 kW / 12.5 hp @ 5700 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Gear Ratios: 1st 13.42 / 2nd 9.13 / 3rd 6.32 / 4th 4.71:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Coil spring with hydraulic shock absorber, double effect
Rear Suspension: Coil spring with hydraulic shock absorber, double effect
Front Brakes: 125 mm drum, expanding type
Rear Brakes: 127 mm drum, expanding type
Wheels: Interchangeable, split rim
Front Tyre: 3.5 x 10″
Rear Tyre: 3.5 x 10″
Dimensions: Length: 1760 mm / 69.3 in Width: 695 mm / 27.3 in Height: 1110 mm / 43.7 in
Wheelbase: 1235 mm / 48.7 in
Ground clearance: 225 mm / 8.9 in
Turning Radius: 1650 mm / 65 in
Dry Weight: 108 kg / 238 lbs
Fuel Capacity: 8 L / 2 US gal
Reserve: 2.1 L / 0.55 US gal
Consumption average: 3 L/100 km / 33 km/l / 78 US mpg
Top Speed: 110 km/h / 68 mph
Colours: Rosso red, Charcoal, Silver
Sources: Vespafan.ch, Piaggio Foundation, Scooterhelp.com, Scooterlounge.com

The post Vespa P200E (1977-82) appeared first on MotorcycleSpecifications.com.

]]> Vespa PK50 (1982-93) https://motorcyclespecifications.com/vespa-pk50-1982-93-specs/ Wed, 29 Mar 2023 19:27:02 +0000 https://motorcyclespecifications.com/?p=36705 The Vespa PK50 motorcycle was produced from 1982 to 1993 in various models including the PK50S, PK50 Elestart, PK50XL, PK50XLS, and PK50. The engine is a two-stroke, single cylinder with

The post Vespa PK50 (1982-93) appeared first on MotorcycleSpecifications.com.

]]> The Vespa PK50 motorcycle was produced from 1982 to 1993 in various models including the PK50S, PK50 Elestart, PK50XL, PK50XLS, and PK50. The engine is a two-stroke, single cylinder with a capacity of 49.8 cc and a compression ratio of 9.1:1. The mixture used is 1:50 and the carburettor is a Dell’Orto SHB 16/10. The motorcycle is air-cooled with a centrifugal fan and uses a rotary valve for induction. The flywheel magneto is used for ignition and starting is done through a kick start. The clutch is oil-bath, multi-plate and the motorcycle has a maximum power of 2.7 kW at 7000 rpm. The transmission is a 4-speed grip shift with gear ratios of 1st 26.88 / 2nd 17.74 / 3rd 12.78 / 4th 9.62:1. The final drive is direct, and the motorcycle has a pressed sheet steel frame with a streamlined monocoque structure. It has trailing arm coil spring and damper front suspension and coil spring damper rear suspension with 150mm drum brakes on both wheels. The wheels are pressed steel flanges and interchangeable with 3×10″ tires. The motorcycle has a length of 1675mm, width of 700mm, and a height of 1070mm with a wheelbase of 1175mm and a ground clearance of 252mm. The dry weight is 77kg, and the fuel capacity is 6.2L with an additional 1.2L in reserve. Its consumption average is 3.5L/100km and has a top speed of 70km/h.

Technical specifications:

Make Model: Vespa PK 50, PK50S, PK50 Elestart, PK50XL, PK50XLS, PK50

Year: 1982 – 93
Engine: Two stroke, single cylinder
Capacity: 49.8 cc / 3.0 cub in
Bore x Stroke: 38.4 x 43 mm
Compression Ratio: 9.1:1
Mixture: 1:50
Carburettor: Dell’Orto SHB 16/10
Cooling: Air cooled with centrifugal fan
Battery: 1 x 6V – 9.5 Ah batteries
Induction: Rotary valve
Ignition: Flywheel magneto
Starting: Kick start
Spark Plug: Bosch W225 T1
Clutch: Oil bath, multi plate
Max Power: 2.7 kW / 3.7 Hp @ 7000 rpm
Transmission: 4 Speed, grip shift
Gear Ratios: 1st 26.88 / 2nd 17.74 / 3rd 12.78 / 4th 9.62:1
Final Drive: Direct drive
Frame: Pressed sheet steel with streamlined monocoque structure
Front Suspension: Trailing arm, coil spring, damper
Rear Suspension: Coil spring, damper
Front Brakes: 150 mm drum
Rear Brakes: 150 mm drum
Wheels: Pressed steel flanges, interchangeable
Front Tyre: 3 x 10″
Rear Tyre: 3 x 10″
Dimensions: Length: 1675 mm / 65.9 in Width: 700 mm / 27.6 in Height: 1070 mm / 42.0 in
Wheelbase: 1175 mm / 46.5 in
Ground clearance: 252 mm / 9.9 in
Dry Weight: 77 kg / 169.7 lbs
Fuel Capacity: 6.2 L / 1.6 US gal
Reserve: 1.2 L / 0.32 US gal
Consumption average: 3.5 L/100 km / 29 km/l / 68 US mpg
Top Speed: 70 km/h / 43.5 mph
Source: vesparade.worldpress.com, Wikipedia, Vespa by Giorgio Sarti

The post Vespa PK50 (1982-93) appeared first on MotorcycleSpecifications.com.

]]> BMW F 800ST (1951-52) https://motorcyclespecifications.com/bmw-f-800st-1951-52-specs/ Wed, 29 Mar 2023 05:27:51 +0000 https://motorcyclespecifications.com/?p=35925 Sorry, there seems to be a mistake. There is no content provided about a BMW F 800ST (1951-52) motorcycle. Please provide me with the content so I can assist you

The post BMW F 800ST (1951-52) appeared first on MotorcycleSpecifications.com.

]]> Sorry, there seems to be a mistake. There is no content provided about a BMW F 800ST (1951-52) motorcycle. Please provide me with the content so I can assist you with the summary.

Technical specifications:

Continue reading

The post BMW F 800ST (1951-52) appeared first on MotorcycleSpecifications.com.

]]> Vespa 180 SS (1964-68) https://motorcyclespecifications.com/vespa-180-ss-1964-68-specs/ Wed, 29 Mar 2023 02:55:58 +0000 https://motorcyclespecifications.com/?p=35785 The Vespa 180 Super Sport motorcycle was produced from 1964 to 1968, with 35,699 units made during that time. It featured a two-stroke, single-cylinder engine with a capacity of 181.2

The post Vespa 180 SS (1964-68) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 180 Super Sport motorcycle was produced from 1964 to 1968, with 35,699 units made during that time. It featured a two-stroke, single-cylinder engine with a capacity of 181.2 cc and a maximum power of 7.4 kW / 10 hp. The bike had a four-speed, constant mesh transmission with gear ratios of 1st 14.47, 2nd 10.09, 3rd 7.48, and 4th 5.71:1. The frame was made of pressed sheet steel with a streamlined monocoque structure, and the bike had a single unit front damper and spring for suspension with a coil spring and damper on the rear. The bike had 125 mm and 127 mm drum brakes on the front and rear wheels, respectively. The wheels were cast with cooling fins and had 3.5 x 10-inch tires. The bike had a dry weight of 116 kg and a top speed of 105 km/h. It was available in blue, red, and white colors. The fuel capacity was 9 L with an average consumption of 2.5 L/100 km. This information was sourced from Wikipedia, Scooterhelp.com, and Scooterlounge.com.

Technical specifications:

Make Model: Vespa 180 Super Sport

Year: 1964 – 68
Production: 35 699 units
Engine: Two stroke, single cylinder
Capacity: 181.2 cc / 11.1 cub in
Bore x Stroke: 62 x 60 mm
Compression: 7.7:1
Carburetor: Dell’Orto SI 27/23
Cooling: Air cooled, forced
Fuel Mixture: 1:50
Ignition: Contact breaker and coil, 35W
Starting: Kick start
Battery: 6V
Clutch: Wet, multiplate
Max Power: 7.4 kW / 10 hp
Transmission: 4 Speed, grip-shift, constant mesh
Gear Ratios: 1st 14.47 / 2nd 10.09 / 3rd 7.48 / 4th 5.71:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Single unit front damper and spring
Rear Suspension: Coil spring with damper
Front Brakes: 125 mm drum
Rear Brakes: 127 mm drum
Wheels: Cast with cooling fins
Front Tyre: 3.5 x 10″
Rear Tyre: 3.5 x 10″
Dimensions: Length: 1770 mm / 70 in Width: 670 mm / 26 in Height: 1045 mm / 41 in
Wheelbase: 1230 mm / 48 in
Ground Clearance: 220 mm / 8.7 in
Turning Circle: 1400 mm / 55 in
Dry Weight: 116 kg / 256 lbs
Fuel Capacity: 9 L / 2.4 US gal
Consumption average: 2.5 L/100 km / 40 km/l / 95 US mpg
Top Speed: 105 km/h / 65 mph
Colours: Blue, Red, White
Sources: Wikipedia, Scooterhelp.com, Scooterlounge.com

The post Vespa 180 SS (1964-68) appeared first on MotorcycleSpecifications.com.

]]> Vespa 200 Rally (1972-79) https://motorcyclespecifications.com/vespa-200-rally-1972-79-specs/ Tue, 28 Mar 2023 23:55:58 +0000 https://motorcyclespecifications.com/?p=35618 The Vespa 200 Rally was produced between 1972 and 1979, with 41,700 units made. It features a two-stroke, single-cylinder, horizontal cylinder engine with a capacity of 198cc, giving a max

The post Vespa 200 Rally (1972-79) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 200 Rally was produced between 1972 and 1979, with 41,700 units made. It features a two-stroke, single-cylinder, horizontal cylinder engine with a capacity of 198cc, giving a max power of 9.2kW/12.5 hp at 5700 rpm. The carburetor is a Dell’Orto SI 24/24 E, and ignition is electronic. The scooter has a wet, multiplate clutch and a 4-speed constant mesh transmission with grip-shift. The frame is a pressed sheet steel monocoque structure, with coil spring and hydraulic shock absorber suspension on both the front and back. The front and rear brakes are expanding drum type and the wheels are interchangeable split rim with 3.5 x 10″ tires. The scooter is 1770mm long, 690mm wide, and 1070mm high, with a wheelbase of 1230mm and ground clearance of 130mm. It weighs 103kg and has an 8.2L fuel tank, with a 1.8L reserve. Fuel consumption averages at 3L/100 km, and its top speed is 110 km/h. It comes in various colors including moonlight metallic, coral red, and Polaris grey. Sources for this information include Vespafan.ch, Piaggio Foundation, and Scooterhelp.com.

Technical specifications:

Make Model: Vespa 200 Rally

Year: 1972 – 79
Production: 41 700 units
Engine: Two stroke, single cylinder, horisontal cylinder
Capacity: 198 cc / 12 cub in
Bore x Stroke: 66.5 x 57 mm
Compression: 8.2:1
Carburetor: Dell’Orto SI 24/24 E
Cooling: Air cooled, forced
Fuel Mixture: 1:50
Ignition: Electronic
Starting: Kick start
Battery: 6V
Spark Plug: Marelli CW 7 LTP, Champion N 88, Bosch W240 T2, KLG FE 80, Lodge 2H LH
Clutch: Wet, multiplate
Max Power: 9.2 kW / 12.5 hp @ 5700 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Gear Ratios: 1st 13.42 / 2nd 9.13 / 3rd 6.32 / 4th 4.71:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Coil spring with hydraulic shock absorber, double effect
Rear Suspension: Coil spring with hydraulic shock absorber, double effect
Front Brakes: 125 mm drum, expanding type
Rear Brakes: 127 mm drum, expanding type
Wheels: Interchangeable, split rim
Front Tyre: 3.5 x 10″
Rear Tyre: 3.5 x 10″
Dimensions: Length: 1770 mm / 69.6 in Width: 690 mm / 27.6 in Height: 1070 mm / 42.1 in
Wheelbase: 1230 mm / 48.4 in
Ground clearance: 130 mm / 5.2 in
Turning Radius: 1400 mm / 55 in
Dry Weight: 103 kg / 227 lbs
Fuel Capacity: 8.2 L / 2.2 US gal
Reserve: 1.8 L / 0.47 US gal
Consumption average: 3 L/100 km / 33 km/l / 78 US mpg
Top Speed: 110 km/h / 68 mph
Colours: Moonlight metallic, Race red, Iacca red, Katmandu red, Polaris Grey, Coral red
Sources: Vespafan.ch, Piaggio Foundation, Scooterhelp.com

The post Vespa 200 Rally (1972-79) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito I  Naked (1990) https://motorcyclespecifications.com/cagiva-mito-i-naked-1990-specs/ Tue, 28 Mar 2023 22:26:00 +0000 https://motorcyclespecifications.com/?p=35536 The Cagiva Mito I Naked is a motorcycle produced in 1990, with a two-stroke, single-cylinder engine and a capacity of 125.6 cc. It features a 28mm Dell’Orto flat slide carburetor

The post Cagiva Mito I  Naked (1990) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito I Naked is a motorcycle produced in 1990, with a two-stroke, single-cylinder engine and a capacity of 125.6 cc. It features a 28mm Dell’Orto flat slide carburetor and CDI ignition, with a maximum power output of 33.5 hp at 10500 rpm and maximum torque of 19 Nm at 9000 rpm. The transmission has 7 gears and the final drive is via chain. The front suspension is USD telescopic forks and the rear suspension is a swinging arm single shock. The front brakes use a single 320mm disc with a 4 piston caliper and the rear brakes use a single 230mm disc with 1 piston caliper. The front tyre is 110/70-17 and the rear tyre is 150/70-17. The dry weight is 117 kg and the wet weight is 125 kg, with a fuel capacity of 12.8 litres. Braking distance from 60-0 and 100-0 is 13.1 and 37.0 meters, respectively. It can complete a 1/4 mile in 14.0 seconds with a top speed of 164.2 km/h. This information was obtained from a road test conducted by Motosprint in 1990.

Technical specifications:

Make Model: Cagiva Mito I Naked

Year: 1990
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h / 102 mph
Road Test: Motosprint 1990

The post Cagiva Mito I  Naked (1990) appeared first on MotorcycleSpecifications.com.

]]> Vespa 946 Bellisima (2014) https://motorcyclespecifications.com/vespa-946-bellisima-2014-specs/ Tue, 28 Mar 2023 21:16:02 +0000 https://motorcyclespecifications.com/?p=35467 The Vespa 946 Bellisima is a limited edition motorcycle with only 100 units produced in 2014. It features a 155cc engine with forced air cooling and port injected fuel system.

The post Vespa 946 Bellisima (2014) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 946 Bellisima is a limited edition motorcycle with only 100 units produced in 2014. It features a 155cc engine with forced air cooling and port injected fuel system. The ignition is electronic and it has an automatic, dry centrifuge clutch with vibration dampets. It uses a CVT transmission and has a belt final drive. The metal body has welded reinforcements and aluminum elements. The front suspension is a single link arm with coil spring and dual-action hydraulic shock absorber while the rear suspension has coil spring with adjustable preload and a mono shock with progressive lever system. The braking system features ABS, 2 channels, with ASR system and 220 mm disc brakes for both front and rear. The tyres are 120/70-12 and 130/70-12 for front and rear respectively. The motorcycle is 1965mm long, 730mm wide with a wheelbase of 1405mm and a seat height of 805mm. The fuel capacity is 8.5L and the consumption is up to 2.0L/100 km or 117 US mpg with a top speed of 93 km/h or 57 mph. It is available in Metallic grey with red trim and Metallic blue with grey trim.

Technical specifications:

Make Model: Vespa 946 Bellisima

Year: 2014
Production: Limited to 100 units
Engine: Four stroke, single cylinder, catalytic converter, EFI, SOHC, 3 valves
Capacity: 155 cc / 9.5 cub in
Cooling: Forced air cooling system
Lubrication: Wet sump
Fuel System: Port Injected injection
Ignition: Electronic
Starting: Electric
Clutch: Automatic, dry centrifuge with vibration dampets
Transmission: CVT, twist and go
Final Drive: Belt
Frame: Metal body with welded reinforcements and aluminium elements
Front Suspension: Single link arm with coil spring and dual-action hydraulic shock absorber
Rear Suspension: Coil spring with adjustable preload, mono shock with progressive lever system
Braking System: ABS, 2 channels, with ASR system
Front Brakes: 220 mm disc
Rear Brakes: 220 mm disc
Front Tyre: 120/70-12 in.
Rear Tyre: 130/70-12 in.
Dimensions: Length: 1965 mm / 77.3 in Width: 730 mm / 28.7 in
Wheelbase: 1405 mm / 55.3 in
Seat Height: 805 mm / 31.6 in
Fuel Capacity: 8.5 L / 2.2 US gal
Consumption (up to): 2.0 L/100 km / 50 km/l / 117 US mpg
Top Speed: 93 km/h / 57 mph
Colours: Metallic grey with red trim, Metallic blue with grey trim

The post Vespa 946 Bellisima (2014) appeared first on MotorcycleSpecifications.com.

]]> Vespa 160 GS (1962-64) https://motorcyclespecifications.com/vespa-160-gs-1962-64-specs/ Mon, 27 Mar 2023 12:42:01 +0000 https://motorcyclespecifications.com/?p=33627 The Vespa 160 GS was a popular motorcycle produced between 1962 and 1964, with a total of 59,999 units produced. It has a single-cylinder, two-stroke engine with a capacity of

The post Vespa 160 GS (1962-64) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 160 GS was a popular motorcycle produced between 1962 and 1964, with a total of 59,999 units produced. It has a single-cylinder, two-stroke engine with a capacity of 145.5cc and a compression ratio of 7.4:1. The motorcycle has a Dell’Orto SI 27/23 carburetor and air-cooled, forced cooling. The fuel mixture is 1:50 and has a kick start with a 6V battery. The clutch is a wet, multiplate with a grip-shift 4-speed transmission. The Vespa has a pressed sheet steel frame with a streamlined monocoque structure and features front suspension damper and spring, and rear suspension coil spring with damper. The motorcycle has front and rear 125mm and 127mm drum brakes, interchangeable wheels with front and rear 3.5 x 10″ tires. The Vespa has a length of 1795 mm, width of 710 mm, and height of 1045 mm, with a ground clearance of 220 mm, turning radius of 1400 mm, and a dry weight of 110 kg. The fuel capacity is 7.5 L and the consumption average is 2.1 L/100 km. The acceleration is 0-75 km/h in 17.5 seconds with a top speed of 100 km/h. The Vespa 160 GS comes in blue, blue-green, silver, and white colors.

Technical specifications:

Make Model: Vespa 160 GS

Year: 1962 – 64
Production: 59 999 units
Engine: Two stroke, single cylinder
Capacity: 145.5 cc / 8.9 cub in
Bore x Stroke: 57 x 57 mm
Compression: 7.4:1
Carburetor: Dell’Orto SI 27/23
Cooling: Air cooled, forced
Fuel Mixture: 1:50
Ignition: Flywheel and magneto with 35W output
Starting: Kick start
Battery: 6V
Clutch: Wet, multiplate
Max Power: 5.9 kW / 8 hp @ 6500 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Gear Ratios: 1st 14.47 / 2nd 10.28 / 3rd 7.61 / 4th 5.84:1
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Single unit front damper and spring
Rear Suspension: Coil spring with damper
Front Brakes: 125 mm drum
Rear Brakes: 127 mm drum
Wheels: Interchangeable
Front Tyre: 3.5 x 10″
Rear Tyre: 3.5 x 10″
Dimensions: Length: 1795 mm / 71 in Width: 710 mm / 28 in Height: 1045 mm / 41 in
Wheelbase: 1220 mm / 48 in
Ground Clearance: 220 mm / 8.7 in
Turning Circle: 1400 mm / 55 in
Dry Weight: 110 kg / 243 lbs (incl. spare wheel)
Fuel Capacity: 7.5 L / 2.0 US gal
Consumption average: 2.1 L/100 km / 48 km/l / 112 US mpg
Acceleration: 0 – 75 km/h / 47 mph: 17.5 sec
Top Speed: 100 km/h / 62 mph
Colours: Blue, Blue/Green, Silver, White
Sources: Wikipedia, Scooterhelp.com, Scooterlounge.com

The post Vespa 160 GS (1962-64) appeared first on MotorcycleSpecifications.com.

]]> BMW F 800ST (2009) https://motorcyclespecifications.com/bmw-f-800st-2009-specs/ Sat, 25 Mar 2023 19:01:26 +0000 https://motorcyclespecifications.com/?p=31257 The BMW F 800ST is a sport touring motorcycle that was introduced in 2009. It is powered by an 798cc liquid-cooled parallel twin engine that delivers 85 horsepower and 62

The post BMW F 800ST (2009) appeared first on MotorcycleSpecifications.com.

]]> The BMW F 800ST is a sport touring motorcycle that was introduced in 2009. It is powered by an 798cc liquid-cooled parallel twin engine that delivers 85 horsepower and 62 lb-ft of torque. The bike has a six-speed transmission and a belt drive system.

The F 800ST features a comfortable riding position with an adjustable seat and handlebars. It also has a fairing and windscreen that provide good wind protection for the rider. The bike has a top speed of approximately 125 mph.

Other notable features of the F 800ST include a fuel capacity of 4.2 gallons, ABS brakes, and a rear suspension that can be adjusted for preload and rebound. The bike also has a storage compartment under the seat that is capable of holding a helmet.

Overall, the F 800ST is a versatile motorcycle that is suitable for both commuting and long-distance touring. Its comfortable seating position and wind protection make it an ideal choice for those who enjoy touring on the open road. The bike is also relatively lightweight and nimble, making it easy to handle in city traffic.

Technical specifications:

Continue reading

The post BMW F 800ST (2009) appeared first on MotorcycleSpecifications.com.

]]> Vespa 150 GS (1955-61) https://motorcyclespecifications.com/vespa-150-gs-1955-61-specs/ Sat, 25 Mar 2023 12:16:08 +0000 https://motorcyclespecifications.com/?p=30873 The Vespa 150 GS, produced between 1955 and 1961, had 126,349 units made. It was equipped with a single cylinder, two-stroke engine that had a capacity of 145.5cc and a

The post Vespa 150 GS (1955-61) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 150 GS, produced between 1955 and 1961, had 126,349 units made. It was equipped with a single cylinder, two-stroke engine that had a capacity of 145.5cc and a compression ratio of 7:1. The carburettor used was a Dell’Orto UB 23 S3, and it was air-cooled with a centrifugal fan. Ignition was from a 6 pole flywheel magneto, and starting was via a kick start. The clutch was wet, multiplate with cork inserts, and the max power was 6.0kW/8.2hp at 7500rpm. It was a 4-speed transmission with grip-shift, constant mesh, and direct drive for the final drive.

The frame was made of pressed sheet steel, with a streamlined monocoque structure. The front suspension was a stub axle with swinging hub and variable rate coil spring and double action hydraulic damper. The rear suspension was a swinging bracket for the engine and wheel, with variable rate coil spring and co-axial double action hydraulic damper. The front and rear brakes were both drum, expanding type with cooling ribs. The wheels were interchangeable, and the tyres were 3.5 x 10″.

The dimensions of the Vespa 150 GS were 1700mm x 700mm x 1050mm (length x width x height), with a wheelbase of 1180mm and a ground clearance of 285mm. The turning radius was 1400mm, and the dry weight was 100kg. The fuel capacity was 12L with a reserve of 1.2L, and the average consumption was 3.1L/100km, 32km/l, or 80 US mpg. The top speed was around 100km/h or 62mph. It was available in metallic blue/green.

Technical specifications:

Make Model: Vespa 150 GS

Year: 1955 – 61
Production: 126 349 units
Engine: Two stroke, single cylinder
Capacity: 145.5 cc / 8.8 cub in
Bore x Stroke: 57 x 57 mm
Compression: 7:1
Carburetor: Dell’Orto UB 23 S3
Cooling: Air cooled, centrifugal fan
Fuel Mixture: 1:15
Ignition: 6 pole flywheel magneto
Starting: Kick start
Battery: 6V
Clutch: Wet, multiplate with cork inserts
Max Power: 6.0 kW / 8.2 hp @ 7500 rpm
Transmission: 4 Speed, grip-shift, constant mesh
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Stub axle with swining hub and variable rate coil spring and double action hydraulic damper
Rear Suspension: Swinging bracket for engine and wheel, with variable rate coil spring and co-axial double action hydraulic damper
Front Brakes: Drum, expanding type with cooling ribs
Rear Brakes: Drum, expanding type with cooling ribs
Wheels: Interchangeable
Front Tyre: 3.5 x 10″
Rear Tyre: 3.5 x 10″
Dimensions: Length: 1700 mm / 67 in Width: 700 mm / 27 in Height: 1050 mm / 41 in
Wheelbase: 1180 mm / 46.4 in
Ground clearance: 285 mm / 11.2 in
Turning Radius: 1400 mm / 55 in
Dry Weight: 100 kg / 220 lbs
Fuel Capacity: 12 L / 3.17 US gal
Reserve: 1.2 L / 0.3 US gal
Consumption average: 3.1 L/100 km / 32 km/l / 80 US mpg
Top Speed: 100 km/h / 62 mph
Colours: Metallic blue/green
Sources: Scooterlounge.com

The post Vespa 150 GS (1955-61) appeared first on MotorcycleSpecifications.com.

]]> Vespa GTS 125 Super Sport (2012) https://motorcyclespecifications.com/vespa-gts-125-super-sport-2012-specs/ Sat, 25 Mar 2023 06:52:03 +0000 https://motorcyclespecifications.com/?p=30570 The Vespa GTS 125 Super Sport motorcycle was released in 2012 and features a four-stroke, single-cylinder, liquid-cooled engine that produces a maximum power of 11 kW at 9750 rpm and

The post Vespa GTS 125 Super Sport (2012) appeared first on MotorcycleSpecifications.com.

]]> The Vespa GTS 125 Super Sport motorcycle was released in 2012 and features a four-stroke, single-cylinder, liquid-cooled engine that produces a maximum power of 11 kW at 9750 rpm and torque of 12 Nm at 7500 rpm. It has an automatic, dry centrifuge clutch with damper buffers and a CVT transmission with a torque server. The motorcycle has a sheet metal body with welded reinforcements and features a single-arm, dual-chamber hydraulic shock absorber with coaxial spring for the front suspension and two dual-effect shock absorbers with adjustable preload for the rear suspension. The front and rear brakes are both single 220 mm stainless steel discs that are operated hydraulically. The Vespa GTS 125 Super Sport has a length of 1930 mm, a width of 755 mm, and a wheelbase of 1370 mm. It has a seat height of 790 mm and a dry weight of 158 kg. The fuel tank has a capacity of 9.2 litres or 2.4 US gallons.

Technical specifications:

Make Model: Vespa GTS 125 Super Sport

Year: 2012 –
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 124 cc / 7.6 cub in
Bore x Stroke: 57 mm x 48.6 mm
Cooling: Liquid cooled
Lubrication: Wet sump, chain driven lube pump
Ignition: Electric
Starting: Electric
Clutch: Automatic, dry centrifuge with damper buffers
Max Power: 11 kW / 14.9 hp @ 9750 rpm
Max Torque: 12 Nm / 1.2 kgf-m / 8.86 ft/lb @ 7500 rpm
Transmission: CVT with torque server
Final Drive: Belt
Frame: Sheetmetal body with welded reinforcements
Front Suspension: Single arm, dual chamber hydraulic shock absorber with coaxial spring
Rear Suspension: Two dual effect shock absorbers with adjustable preload
Front Brakes: Single 220 mm stainless steel disc, Hydraulically operated
Rear Brakes: Single 220 mm stainless steel disc, Hydraulically operated
Front Tyre: 110/70-R12″
Rear Tyre: 130/70-R12″
Dimensions: Length 1930 mm / 75.9 in Width 755 mm / 29.7 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 158 kg / 348 lbs
Fuel Capacity: 9.2 Litres / 2.4 US gal

The post Vespa GTS 125 Super Sport (2012) appeared first on MotorcycleSpecifications.com.

]]> Vespa PK50 (1981-93) https://motorcyclespecifications.com/vespa-pk50-1981-93-specs/ Sat, 25 Mar 2023 03:57:01 +0000 https://motorcyclespecifications.com/?p=30411 The Vespa PK50 was a popular motorcycle produced by Vespa from 1981 to 1993. It came in various models including the Vespa P 80/E/XE, PX 80XE, PX 80E Arcobaleno, PK

The post Vespa PK50 (1981-93) appeared first on MotorcycleSpecifications.com.

]]> The Vespa PK50 was a popular motorcycle produced by Vespa from 1981 to 1993. It came in various models including the Vespa P 80/E/XE, PX 80XE, PX 80E Arcobaleno, PK 80S, PK 80S Elestart, PK 80S Automatica, PK 80S/Automatica El, and PK 80E Arcobaleno El. The motorcycle has a two-stroke, single cylinder engine with a capacity of 79cc and a mixture ratio of 1:50. It uses a Dell’Orto SHB 16/10 carburettor and is air-cooled with a centrifugal fan. The ignition system uses a flywheel magneto, and the motorcycle has a kick start. Its maximum power output is 4.4 kW / 6 Hp @ 7000 rpm. The fuel capacity is 8.0 L / 2.1 US gal, and the motorcycle uses a 6V – 9.5 Ah battery. The frame is made of pressed sheet steel with a streamlined monocoque structure. The front suspension is a trailing arm, coil spring, and damper, while the rear suspension is a coil spring and damper. The brakes are 150mm drums, and the wheels have interchangeable pressed steel flanges. The front and rear tyres are both 3 x 10 inches.

Technical specifications:

Make Model: Vespa P 80 / P 80E, P 80X / PX 80XE, PX 80E Arcobaleno PK 80S, PK 80S Elestart, PK 80S Automatica, PK 80S / Automatica El, PK 80E Arcobaleno El

Year: 198 1 -93
Engine: Two stroke, single cylinder
Capacity: 79 cc / 4.8 cub in
Mixture: 1:50
Carburettor: Dell’Orto SHB 16/10
Cooling: Air cooled with centrifugal fan
Battery: 1 x 6V – 9.5 Ah batteries
Induction: Rotary valve
Ignition: Flywheel magneto
Starting: Kick start
Spark Plug: NGK B6ES
Clutch: Oil bath, multi plate
Max Power: 4.4 kW / 6 Hp @ 7000 rpm
Final Drive: Direct drive
Frame: Pressed sheet steel with streamlined monocoque structure
Front Suspension: Trailing arm, coil spring, damper
Rear Suspension: Coil spring, damper
Front Brakes: 150 mm drum
Rear Brakes: 150 mm drum
Wheels: Pressed steel flanges, interchangeable
Front Tyre: 3 x 10″
Rear Tyre: 3 x 10″
Fuel Capacity: 8.0 L / 2.1 US gal
Source: Databikes, Wikipedia

The post Vespa PK50 (1981-93) appeared first on MotorcycleSpecifications.com.

]]> Vespa 946 Red (2017) https://motorcyclespecifications.com/vespa-946-red-2017-specs/ Fri, 24 Mar 2023 12:14:07 +0000 https://motorcyclespecifications.com/?p=29596 The Vespa 946 Red is a limited edition motorcycle with only 100 units produced in 2017. It features a four stroke, single cylinder, 155cc engine with a forced air cooling

The post Vespa 946 Red (2017) appeared first on MotorcycleSpecifications.com.

]]> The Vespa 946 Red is a limited edition motorcycle with only 100 units produced in 2017. It features a four stroke, single cylinder, 155cc engine with a forced air cooling system and a port injected fuel system. The ignition is electronic and the clutch is automatic with a CVT transmission. The frame is made of metal with welded reinforcements and aluminum elements. The front suspension is a single link arm with a coil spring and dual-action hydraulic shock absorber, while the rear suspension has a coil spring with adjustable preload and a mono shock with a progressive lever system. The braking system includes ABS and 2 channels with an ASR system, while the front and rear brakes are 220mm discs. The motorcycle has a top speed of 93 km/h and a fuel capacity of 8.5 liters, with a consumption of up to 2.0 L/100 km. Its dimensions include a length of 1965mm, width of 730mm, and height of 1404mm, with a wheelbase of 1405mm and seat height of 805mm.

Technical specifications:

Make Model: Vespa 946 Red

Year: 2017 –
Production: Limited to 100 units
Engine: Four stroke, single cylinder, SOHC, 3 valves
Capacity: 155 cc / 9.5 cub in
Bore x Stroke: 58 x 58.6 mm
Cooling System: Forced air cooling system
Compression Ratio: 10.5:1
Exhaust: Catalytic converter
Emission: Euro 3
Lubrication: Wet sump
Fuel System: Port Injected injection
Ignition: Electronic
Starting: Electric
Clutch: Automatic, dry centrifuge with vibration dampets
Transmission: CVT, twist and go
Final Drive: Belt
Frame: Metal body with welded reinforcements and aluminium elements
Front Suspension: Single link arm with coil spring and dual-action hydraulic shock absorber
Rear Suspension: Coil spring with adjustable preload, mono shock with progressive lever system
Braking System: ABS, 2 channels, with ASR system
Front Brakes: 220 mm disc ABS
Rear Brakes: 220 mm disc
Front Tyre: 120/70-12 in
Rear Tyre: 130/70-12 in
Dimensions: Length: 1965 mm / 77.4 in Width: 730 mm / 28.7 in Height: 1404 mm / 55.3 in
Wheelbase: 1405 mm / 55.3 in
Seat Height: 805 mm / 31.6 in
Fuel Capacity: 8.5 Litres / 2.2 US gal
Consumption (up to): 2.0 L/100 km / 50 km/l / 117 US mpg
Top Speed: 93 km/h / 57 mph

The post Vespa 946 Red (2017) appeared first on MotorcycleSpecifications.com.

]]>