BMW R80 RT Mono Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 22:26:35 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 BMW R80 RT Mono (1984-85) https://motorcyclespecifications.com/bmw-r80-rt-mono-1984-85-specs/ Thu, 06 Apr 2023 15:02:59 +0000 https://motorcyclespecifications.com/?p=47095 The BMW R80 RT Mono is a motorcycle that was made from 1984-85. It has a four-stroke, two-cylinder horizontally opposed boxer engine with a capacity of 797.5 cc. The bike

The post BMW R80 RT Mono (1984-85) appeared first on MotorcycleSpecifications.com.

]]> The BMW R80 RT Mono is a motorcycle that was made from 1984-85. It has a four-stroke, two-cylinder horizontally opposed boxer engine with a capacity of 797.5 cc. The bike is air-cooled and has a compression ratio of 8.2:1. The engine is operated by pushrods and has two valves per cylinder. It is powered by two Bing constant depression carburetors and has battery ignition. The alternator used is a 12V/280W Bosch. The R80 RT Mono has an electric starting system, and its maximum power output is 36.4 kW at 6500 RPM. It has a dry single plate clutch with a diaphragm spring and a shaft final drive. Its transmission is five-speed. The front suspension features telescopic hydraulic forks, and the rear suspension is a long swinging arm with an adjustable strut. The front has two 260mm discs with a one-piston caliper, and the rear has a single 200mm drum brake. The bike has a wheelbase of 1465mm and a seat height of 810mm. Its wet weight is 235kg with a fuel capacity of 24 litres. The bike has a top speed of 171km/h and takes 13.9 seconds to do 1/4 mile.

Technical specifications:

Make Model: BMW R 80RT Mono

Year: 1984 – 85
Engine: Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder.
Capacity: 797.5 cc / 48.7 cu in.
Bore x Stroke: 84.8 x 70.6 mm
Cooling System: Air cooled
Compression Ratio: 8.2:1
Induction: 2 x Bing constant depression carburetors
Ignition: Battery ignition
Alternator: Bosch 12 V/280 W
Spark Plug: Bosch W 175 T 30
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 6500 rpm
Max Torque: 59 Nm / 6.0 kgf-m / 43 ft lb @ 3500 rpm
Clutch: Dry single plate, with diaphragm spring
Transmission: 5 Speed
Final Drive: Shaft
Gear Ratio: 1st 4.40 / 2nd 2.86 / 3rd 2.07 / 4th 1.67 / 5th 1.50
Rear Wheel Ratio: 1:3.20 or 1:3.36
Front Suspension: Telescopic hydraulic forks.
Front Wheel Travel: 200 mm / 7.3 in
Rear Suspension: Long swinging arm with adjustable strut.
Rear Wheel Travel: 125 / 4.9 in
Front Brakes: 2 x 260mm discs, 1 piston caliper
Rear Brakes: Single 200mm drum
Front Wheel: 2.15 – B19
Rear Wheel: 2.50 – B18
Front Tyre: 3.25 – H19
Rear Tyre: 4.00 – H18
Dimensions: Length 2210 mm / 87.0 in Width 746 mm / 29.3 in Height 1465 mm / 57.6 in
Wheelbase: 1465 mm / 57.67 in
Seat Height: 810 mm / 31.9 in
Ground Clearance: 130 mm / 5.11 in
Wet Weight: 235 kg / 417 lbs
Fuel Capacity: 24 Litres / 6.3 gal
Consumption Average: 4.9 L/100 km / 20.4 km/l / 48 mpg
Standing 1/4 Mile: 13.9 sec
Top Speed: 171 km/h / 106 mph
Manual: 5united.net / BMW

The post BMW R80 RT Mono (1984-85) appeared first on MotorcycleSpecifications.com.

]]> Sunbeam Model 90 (1934) https://motorcyclespecifications.com/sunbeam-model-90-1934-specs/ Mon, 27 Mar 2023 19:03:56 +0000 https://motorcyclespecifications.com/?p=33988 The Sunbeam Model 95, also known as Model 90, was a motorcycle produced in 1934. It had a single cylinder engine with a capacity of 493 cc and was equipped

The post Sunbeam Model 90 (1934) appeared first on MotorcycleSpecifications.com.

]]> The Sunbeam Model 95, also known as Model 90, was a motorcycle produced in 1934. It had a single cylinder engine with a capacity of 493 cc and was equipped with a side valve, single exhaust port, and a downdraught TT carburetor. The bore x stroke was 80 x 98 mm and it was air-cooled. It also had a kick start and a 4-speed transmission with a final drive chain. The frame was a duplex cradle made of steel and the front suspension was a Druid-pattern girder fork. The rear suspension was rigid and spring-loaded, and the front and rear brakes were both drums with a diameter of 203mm or 8″. The wheels were made of steel with multi-spoke lacing.

Technical specifications:

Make Model: Sunbeam Model 95, 95R

Year: 1934
Engine: Single cilinder, side valve, single exhaust port, downdraught TT carburetor
Capacity: 493 cc / 30.1 cu in
Bore x Stroke: 80 x 98 mm
Cooling System: Air cooled
Exhaust: Single
Starting: Kick
Transmission: 4-Speed
Final Drive: Chain
Frame: Duplex cradle, steel
Front Suspension: Druid-pattern, girder forks
Rear Suspension: Rigid, spring loaded saddle
Front Brakes: Drum, 203 mm / 8″
Rear Brakes: Drum, 203 mm / 8″
Wheels: Steel, multi-spoke laced

The post Sunbeam Model 90 (1934) appeared first on MotorcycleSpecifications.com.

]]>