Benelli Archives - MotorcycleSpecifications.com

Benelli TNT Naked (2010)

admin — Fri, 07 Apr 2023 10:29:00 +0000

The Benelli TNT Naked motorcycle model for 2010 has a four-stroke, transverse three-cylinder engine with a capacity of 899 cc. The bike has a maximum power output of 88 kW / 131 hp at 9000 rpm and a maximum torque of 90 Nm / 9.2 kgf-m / 66.4 lb-ft at 5000 rpm. The front suspension is a Marzocchi 50 mm diameter upside-down fork, which is adjustable, and the rear suspension is a mono-shock absorber with adjustable extension and spring load. The front brakes consist of two 320 mm discs with four-piston calipers, and the rear brakes have a single 240 mm disc with a two-piston caliper. The bike has a wet weight of 208 kg / 459 lbs, with a fuel capacity of 16 litres / 4.2 US gal, and fuel consumption of 5.3 L/100 km / 18.4 km/l / 43.3 US mpg. It has a standing 1/4 mile time of 11.5 seconds and a top speed of 235 km/h 146 mph. The Benelli TNT Naked is available in orange, white, and black colors.

Technical specifications:

Make Model: Benelli TNT 899 Sport

Year: 2010
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 899 cc / 54.9 cu in
Bore x Stroke: 88 x 49.2 mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Exhaust: 3-into-1, underseat
Induction: Electronic injection with 3 throttle bodies 53 mm
Ignition: Electronic
Starting: Electric
Max Power: 88 kW / 131 hp @ 9000 rpm
Max Torque: 90 Nm / 9.2 kgf-m / 66.4 lb-ft @ 5000 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Front Suspension: Marzocchi 50 mm diameter upside down fork, adjustable
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70 -ZR17
Rear Tyre: 190/50 -ZR17
Seat Height: 820 mm / 32.3 in
Wet Weight: 208 kg / 459 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Fuel Consumption: 5.3 L/100 km / 18.4 km/l / 43.3 US mpg
Standing 1/4 Mile: 11.5 sec
Top Speed: 235 km/h / 146 mph
Colour: Orange, White, Black

The post Benelli TNT Naked (2010) appeared first on MotorcycleSpecifications.com.

Benelli Novecento (2005-06)

admin — Fri, 07 Apr 2023 06:21:00 +0000

The Benelli Tornado Tre 900 Novecento was produced from 2005-2006 and featured a four-stroke, transverse three-cylinder engine with a capacity of 898cc. It had a compression ratio of 11.0:1 and was liquid-cooled, with a wet sump lubrication system. The bike had electronic ignition with one injector for each cylinder and a maximum power output of 140 hp at 11,500 rpm. The maximum torque was 95 Nm at 8,800 rpm. The clutch was wet and multiplate with an anti-blocking system, and the transmission was six-speed with a final drive chain. The front suspension was adjustable in compression, rebound, and preloading fork, and the rear suspension was composed of cast and pressed aluminum parts with an adjustable Ahlins monoshock. The bike had a front wheel size of 3.5 x 17 and a rear wheel size of 6.0 x 17. The wheelbase was 1395mm, and the seat height was 810mm. The dry weight of the bike was 198kg, and it had a fuel capacity of 20.5 liters with a fuel consumption of 6.2 L/100 km. Its top speed was 260 km/h, and it had a standing quarter-mile time of 10.8 seconds.

Technical specifications:

Make Model: Benelli Tornado Tre 900 Novecento

Year: 2005 – 06
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 898 cc / 54.8 cu in
Bore x Stroke: 85.3 x 52.4 mm mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: Sagem, electronic ignition with 1 injector for each cylinder
Ignition: Electronic ignition
Starting: Electric
Max Power: 104.4 kW / 140 hp @ 11500 rpm
Max Torque: 95 Nm / 9.69 kgf-m / 70.1 lb-ft @ 8800 rpm
Clutch: Wet, multiplate with anti-blocking system
Transmission: 6 Speed
Final Drive: Chain
Frame: Front section in chrome-molybdenum steel tubes,rear section inhollow cast aluminium box section
Front Suspension: ~Ahlins, adjustable in compression/rebound and preloading fork
Rear Suspension: Swingarm composed of cast and pressed Aluminium parts with ~Ahlins monoshock adjustable in compression rebound and preload
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 4 piston caliper
Front Wheel: 3.5 x 17 in
Front Tyre: 120/70-17
Rear Wheel: 6.0 x 17 in
Rear Tyre: 180/55-17
Wheelbase: 1395 mm / 54.9 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 198 kg / 437 lbs
Fuel Capacity: 20.5 Litres / 5.4 US gal
Fuel Consumption: 6.2 L/100 km / 16.2 km/l / 38.1 US mpg
Standing 1/4 mile: 10.8 sec
Top Speed: 260 km/h / 162 mph

The post Benelli Novecento (2005-06) appeared first on MotorcycleSpecifications.com.

Benelli TNT Cafe Racer (2010)

admin — Fri, 07 Apr 2023 00:26:00 +0000

The Benelli TNT 1130 Cafe Racer is a motorcycle from the year 2010 with a four-stroke, transverse three-cylinder engine that has a capacity of 1130cc/69cu in. It has a compression ratio of 11.5:1, is liquid-cooled, and uses API SJ 15W/50 synthetic oil. The electronic fuel injection system features one injector per cylinder, and the ignition is electronic. The motorcycle has a maximum power of 101kW/135hp at 9500rpm and maximum torque of 117Nm/11.9kgf-m/86.3 lb-ft at 7750rpm. The six-speed transmission is chain-driven, and the final drive is a chain. The front suspension is a Marzocchi 50mm diameter upside-down fork, and the rear suspension is a mono-shock absorber with adjustable extension and spring load. The front brakes use 2 x 320mm discs and 4 piston calipers, while the rear brake is a single 240mm disc with a 2 piston caliper. The motorcycle has aluminum alloy, 10-spoke wheels with a front rim of 3.5 x 17 in and rear rim of 6.0 x 17 in. The motorcycle has a length of 2100mm/82.7in, width of 790mm/31.1in, and a wheelbase of 1443mm/56.8in. It has a dry weight of 205kg/452lbs and a wet weight of 215kg/474lbs. The motorcycle can achieve a top speed of 269km/h/167mph and comes in yellow, red, black, and green/silver color options.

Technical specifications:

Make Model: Benelli TNT 1130 Caf~A(c) Racer

Year: 2010
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Oil: API SJ 15W/50 – synthetic
Oil Capacity: 4 L / 1.1 US gal
Exhaust: With catalytic converter and oxygen sensor
Induction: Electronic injection with 1 injector per cylinder
Ignition: Electronic
Spark plug: NGK CR9E
Battery: 12V, 10Ah
Starting: Electric
Max Power: 101 kW / 135 hp @ 9500 rpm
Max Torque: 117 Nm / 11.9 kgf-m / 86.3 lb-ft @ 7750 rpm
Clutch: Wet
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 2.786 / 2nd 1.994 / 3rd 1.524 / 4th 1.304 / 5th 1.167 / 6th 0.926
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Rake: 25 degrees
Trail: 96 mm / 3.7 in
Front Suspension: Marzocchi 50 mm diameter upside down fork ASD steel tube trellis oscillating main fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Rear Wheel Travel: 115 mm / 4.5 in
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Wheels: Aluminium alloy, 10-spoke
Front Rim: 3.5 x 17 in
Front Tyre: 120/70-ZR17 (58W)
Rear Rim: 6.0 x 17 in
Rear Tyre: 190/55-ZR17 (73W)
Dimensions: Length: 2100 mm / 82.7 in Width: 790 mm / 31.1 in
Wheelbase: 1443 mm / 56.8 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 205 kg / 452 lbs
Wet Weight: 215 kg / 474 lbs
Gross Vehicle Weight Rating: 400 kg / 882 lbs
Fuel Capacity: 16.5 L / 4.4 US gal
Fuel Reserve: 5 L / 1.3 US gal
Consumption Average: 5.8 L/100 km / 17.2 km/lit / 40.5 US mpg
Standing 1/4 Mile: 10.9 sec / 204 km/h / 127 mph
Standing 1000 m: 20.7 sec / 234 km/h / 145 mph
Top Speed: 269 km/h / 167 mph
Colours: Yellow, Red, Black, Green/silver

The post Benelli TNT Cafe Racer (2010) appeared first on MotorcycleSpecifications.com.

Benelli 250 (1974-76)

admin — Thu, 06 Apr 2023 23:25:03 +0000

The Benelli 250 2C Phantom was a motorcycle produced from 1974 to 1976. It had a two-stroke, parallel twin engine with a capacity of 231.4 cc, a compression ratio of 10.0:1, and was air-cooled. The lubrication was petroil with a 20:1 mixture, and the induction was via two 26 mm Dell’Orto VHB carburetors. The bike had an electronic ignition and was kick-started. It had a maximum power of 19 kW / 25 hp at 6800 rpm and a maximum torque of 25.5 Nm / 2.6 kgf-m / 18.8 lb-ft at 6500 rpm. The clutch was wet and multidisc, and the transmission was five-speed. The final drive was chain, and the gear ratios were 1st 20.10 / 2nd 13.18 / 3rd 9.22 / 4th 7.41 / 5th 6.21:1. The frame was a double cradle, tubular steel, and had telescopic forks for front suspension and a swinging arm with double adjustable shocks and concentric springs for rear suspension. The front brakes were drum with 4 self-winding shoes, 180 mm, and the rear brakes were drum, 158 mm. The front tyre was 3.00-18, and the rear tyre was 3.25-18. The wheelbase was 1310 mm / 51.6 in, and the dry weight was 136.5 kg / 301 lbs. The fuel capacity was 14 litres / 3.7 US gal, and the top speed was 145 km/h / 90 mph.

Technical specifications:

Make Model: Benelli 250 2C Phantom

Year: 1974 – 76
Engine: Two stroke, parallel twin
Capacity: 231.4 cc / 14.1 cu in
Bore x Stroke: 56 x 47 mm
Compression Ratio: 10.0:1
Cooling System: Air cooled
Lubrication: Petroil, 20:1 mixture
Induction: 2 x 26 mm Dell’Orto VHB carburetors
Ignition: Electronic
Starting: Kick start
Max Power: 19 kW / 25 hp @ 6800 rpm
Max Torque: 25.5 Nm / 2.6 kgf-m / 18.8 lb-ft @ 6500 rpm
Clutch: Wet, multidisc
Transmission: 5 Speed
Final Drive: Chain
Gear Ratios: 1st 20.10 / 2nd 13.18 / 3rd 9.22 / 4th 7.41 / 5th 6.21:1
Frame: Double cradle, tubular steel
Front Suspension: Telescopic forks
Rear Suspension: Swinging arm with double adjustable shocks and concentric springs
Front Brakes: Drum with 4 selfwinding shoes, 180 mm
Rear Brakes: Drum, 158 mm
Front Tyre: 3.00-18
Rear Tyre: 3.25-18
Wheelbase: 1310 mm / 51.6 in
Dry Weight: 136.5 kg / 301 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Top Speed: 145 km/h / 90 mph

The post Benelli 250 (1974-76) appeared first on MotorcycleSpecifications.com.

Benelli BN 251 (2015)

admin — Thu, 06 Apr 2023 19:27:05 +0000

The Benelli BN 251 motorcycle was released in 2015 and features an inline twin, 4 stroke, 4 valves per cylinder, DOHC engine with a capacity of 249.2 cc (15.2 cu in). This liquid-cooled bike has a compression ratio of 11.2:1, 2-into-1 exhaust, and electronic fuel injection with a 37mm throttle body. The Delphi MT05 ignition and NGK CR8E spark plug provide a maximum power of 18 kW (24.5 hp) at 9000 rpm and maximum torque of 21 Nm (2.14 kgf-m / 15.5 lbs-ft) at 7000 rpm. The six-speed transmission and chain final drive make for a smooth ride. The steel trestle frame uses the engine as a stress member, with upside-down telescopic forks, 41mm front suspension, swingarm monoshock with 50mm rear travel, and aluminium alloy 12 spokes for the wheels. The front and rear disc brakes use four-piston and two-piston calipers, respectively. The bike is equipped with 110/70-ZR17 front and 140/60-ZR17 rear tyres, with dimensions of 2080 mm (81.9 in) in length, 805 mm (31.7 in) in width, and 1090 mm (42.9 in) in height. The wheelbase is 1385 mm (54.5 in), while the ground clearance is 130 mm (5.1 in), and the seat height is 780 mm (30.7 in). The dry weight of the vehicle is 150 kg (331 lbs), with a fuel capacity of 16.5 L (4.4 US gal) and a reserve of 3.5 L (0.9 US gal). The bike comes in white, red, and blue colours.

Technical specifications:

Make Model: Benelli BN 251

Year: 2015
Engine: Inline twin, 4 stroke, 4 valves per cylinder, DOHC
Capacity: 249.2 cc / 15.2 cu in
Bore x Stroke: 72 x 61.2 mm
Cooling System: Liquid cooled
Compression Ratio: 11.2:1
Lubrication: Wet sump
Exhaust: 2-into-1, two catalytic converters and oxygen sensor
Induction: Electronic fuel injection with 37mm throttle body
Ignition: Delphi MT05
Spark Plug: NGK CR8E
Starting: Electric
Max Power: 18 kW / 24.5 hp @ 9000 rpm
Max Torque: 21 Nm / 2.14 kgf-m / 15.5 lbs-ft @ 7000 rpm
Clutch: Wet
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel trestle in steel tubes, engine used as stress member
Front Suspension: Upside down telescopic forks, 41 mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swingarm, monoshock
Rear Wheel Travel: 50 mm / 2.0 in
Front Brakes: Single 280 mm disc, 4-piston caliper
Rear Brakes: Single 240 mm disc, 2-piston caliper
Wheels: Aluminium alloy, 12 spoke
Front Rim: 3.5 x 17
Rear Rim: 4.0 x 17
Front Tyre: 110/70-ZR17
Rear Tyre: 140/60-ZR17
Dimensions: Length: 2080 mm / 81.9 in Width: 805 mm / 31.7 in Height: 1090 mm / 42.9 in
Wheelbase: 1385 mm / 54.5 in
Ground Clearance: 130 mm / 5.1 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 150 kg / 331 lbs
Fuel Capacity: 16.5 L / 4.4 US gal
Reserve: 3.5 L / 0.9 US gal
Colours: White, Red, Blue

The post Benelli BN 251 (2015) appeared first on MotorcycleSpecifications.com.

Benelli TNT Cafe Racer (2008-09)

admin — Thu, 06 Apr 2023 13:12:05 +0000

The Benelli TNT Cafe Racer is a powerful motorcycle with a 1130cc, transverse three-cylinder engine, producing a max power of 135hp at 9500rpm and max torque of 117Nm at 7750rpm. It has a six-speed transmission and a chain final drive. The frame is made of front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminum alloy castings. It has Marzocchi 50mm diameter upside-down fork ASD steel tube trellis oscillating main fork and a mono-shock absorber at the rear with adjustable extension and spring load. The bike has a seat height of 780mm and weighs 215kg when wet. It has aluminum alloy 10-spoke wheels with a 320mm disc with four-piston calipers at the front and a single 240mm disc with two-piston calipers at the rear. It comes with a fuel capacity of 16.5L, fuel reserve of 5L, and an average consumption of 5.8L/100 km. The bike has a top speed of 269 km/h and comes in yellow, red, black, and green/silver colors. Overall, the Benelli TNT Cafe Racer is a powerful, versatile motorcycle with impressive speed and fuel economy.

Technical specifications:

Make Model: Benelli TNT 1130 Caf~A(c) Racer

Year: 2008 – 09
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Oil: API SJ 15W/50 – synthetic
Oil Capacity: 4 L / 1.1 US gal
Exhaust: With catalytic converter and oxygen sensor
Induction: Electronic injection with 1 injector per cylinder
Ignition: Electronic
Spark plug: NGK CR9E
Battery: 12V, 10Ah
Starting: Electric
Max Power: 101 kW / 135 hp @ 9500 rpm
Max Torque: 117 Nm / 11.9 kgf-m / 86.3 lb-ft @ 7750 rpm
Clutch: Wet
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 2.786 / 2nd 1.994 / 3rd 1.524 / 4th 1.304 / 5th 1.167 / 6th 0.926
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Rake: 25 degrees
Trail: 96 mm / 3.7 in
Front Suspension: Marzocchi 50 mm diameter upside down fork ASD steel tube trellis oscillating main fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Rear Wheel Travel: 115 mm / 4.5 in
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Wheels: Aluminium alloy, 10-spoke
Front Rim: 3.5 x 17 in
Front Tyre: 120/70-ZR17 (58W)
Rear Rim: 6.0 x 17 in
Rear Tyre: 190/55-ZR17 (73W)
Dimensions: Length: 2100 mm / 82.7 in Width: 790 mm / 31.1 in
Wheelbase: 1443 mm / 56.8 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 205 kg / 452 lbs
Wet Weight: 215 kg / 474 lbs
Gross Vehicle Weight Rating: 400 kg / 882 lbs
Fuel Capacity: 16.5 L / 4.4 US gal
Fuel Reserve: 5 L / 1.3 US gal
Consumption Average: 5.8 L/100 km / 17.2 km/lit / 40.5 US mpg
Standing 1/4 Mile: 10.9 sec / 204 km/h / 127 mph
Standing 1000 m: 20.7 sec / 234 km/h / 145 mph
Top Speed: 269 km/h / 167 mph
Colours: Yellow, Red, Black, Green/silver

The post Benelli TNT Cafe Racer (2008-09) appeared first on MotorcycleSpecifications.com.

Benelli TNT Titanium (2009-10)

admin — Thu, 06 Apr 2023 12:10:03 +0000

The Benelli TNT Titanium motorcycle was manufactured from 2009 to 2010 and features a transverse three cylinder, DOHC engine with a capacity of 1130cc. It has a compression ratio of 11.5:1 and is liquid-cooled with electronic injection and ignition. The bike has a maximum power of 101 kW/131.3 hp at 9250 rpm and torque of 117 Nm/11.9 kgf-m/86.3 lb-ft at 6750 rpm. The transmission is a six-speed gearbox, and the final drive is a chain. The frame is made with front ASD steel tube trellis and an aluminum alloy castings boxed rear section. The front suspension includes a Marzocchi 50mm upside-down fork, while the rear suspension has a mono-shock absorber that is adjustable for both extension and spring load. The front brakes consist of two 320mm discs and four-piston calipers, while the rear brakes have a single 240mm disc and two-piston caliper. The tires are 120/70-ZR17 for the front and 190/50-ZR17 for the rear, and the seat height is 820mm/32.3in. The dry weight of the bike is 193kg/426lbs, and it features a fuel capacity of 16 liters/4.2 US gallons.

Technical specifications:

Make Model: Benelli TNT Titanium

Year: 2009 – 10
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Induction: Electronic injection with 1 injector per cylinder
Ignition: Electronic ignition
Starting: Electric
Max Power: 101 kW / 131.3 hp @ 9250 rpm
Max Torque: 117 Nm / 11.9 kgf-m / 86.3 lb-ft @ 6750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Front Suspension: Marzocchi 50mm upside down fork, ASD steel tube trellis, oscillating main fork
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70-ZR17
Rear Tyre: 190/50-ZR17
Seat Height: 820 mm / 32.3 in
Dry Weight: 193 kg / 426 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Benelli TNT Titanium (2009-10) appeared first on MotorcycleSpecifications.com.

Benelli 500 Quattro (1976)

admin — Thu, 06 Apr 2023 09:35:58 +0000

The Benelli 500 Quattro is a four stroke, transverse four cylinder motorcycle from 1976 with a capacity of 498 cc and a compression ratio of 10.2:1. It is equipped with a 12v, 15Ah battery and has an electric starting system. The maximum power output is 41 kW / 55 hp at 9400 rpm, and the maximum torque is 46.1 Nm / 4.7 kgf-m / 34 lbs-ft at 9300 rpm. The motorcycle features a steel double cradle frame, telescopic forks for the front suspension, and a pivoted rear fork with five-way spring preload for the rear suspension. The bike also has double disc front brakes measuring 230 mm and a single disc rear brake measuring 200 mm. The Benelli 500 Quattro has a fuel capacity of 19 liters / 5.02 US gallons and a consumption average of 6.2 L/100 km / 16.1 km/l / 37.9 US mpg. The top speed of the motorcycle is 190 km/h / 118 mph. The manual for this motorcycle is available at Epll.no-ip.com.

Technical specifications:

Make Model: Benelli 500 Quattro

Year: 1976
Engine: Four stroke, transverse four cylinders, 2 valves per cylinder, SOHC
Capacity: 498 cc / 30.4 cu in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 10.2:1
Lubrication: Wet sump
Cooling System: Air cooled
Exhaust: 4-into-2 or 4-into-2-into-4
Induction: 4 x 22 mm Dell’Orto VBH22 carburetors
Battery: 12v, 15Ah
Starting: Electric
Max Power: 41 kW / 55 hp @ 9400 rpm
Max Torque: 46.1 Nm / 4.7 kgf-m / 34 lbs-ft @ 9300 rpm
Clutch: Wet, multidisc, cable operated
Transmission: 5 Speed
Final Drive: Chain
Gear Ratios: 1st 16.97 / 2nd 11.85 / 3rd 8.83 / 4th 7.26 / 5th 6.22:1
Frame: Steel, double cradle
Front Suspension: Telescopic forks
Rear Suspension: Pivoted rear fork 5-way spring preload
Front Brakes: Double disc, 230 mm
Rear Brakes: Single disc, 200 mm
Front Tyre: 3.50-18
Rear Tyre: 4.10-18
Dry Weight: 200 kg / 440 lbs
Fuel Capacity: 19 Litres / 5.02 US gal
Consumption Average: 6.2 L/100 km / 16.1 km/l / 37.9 US mpg
Top Speed: 190 km/h / 118 mph
Manual: Epll.no-ip.com

The post Benelli 500 Quattro (1976) appeared first on MotorcycleSpecifications.com.

Benelli BX 570 Motard (2008)

admin — Thu, 06 Apr 2023 09:30:01 +0000

The Benelli BX 570 Motard motorcycle was produced in 2008 and features a four-stroke, single-cylinder engine with a capacity of 505 cc. It has a compression ratio of 11.5:1 and is liquid-cooled. The motorcycle has electronic injection-throttle body induction and digital ignition, and can be started with either a kick or electric start. The bike has a maximum power of 44.5 kW and a maximum torque of 50 Nm, transmitted through a six-speed transmission and chain final drive. The frame is made of an aluminum alloy and has a perimeter design with casting, molded, extruded parts, and structural carbon rods. The front suspension is a 50 mm upside-down fork that is fully adjustable, while the rear suspension is a Sachs mono-shock absorber that is also fully adjustable. The front wheel has a single 260 mm wave disc brake, and the rear wheel has a single 220 mm wave disc brake. The motorcycle has a top speed that has not been reviewed. The length, width and height of the motorcycle are 2160mm, 810mm and 1240mm respectively, and it has a seat height of 960mm. The motorcycle weighs in at 110kg and has a fuel capacity of 9 litres.

Technical specifications:

Make Model: Benelli BX 505 Enduro

Year: 2008
Engine: Four stroke, single cylinder
Capacity: 505 cc / 30.8 cu in
Bore x Stroke: 104 x 59,5 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Lubrication: Wet sump and reeds
Induction: Electronic injection-throttle body 42 mm
Ignition: Digital
Starting: Kick and electric
Exhaust system: With catalytic converter and oxygen sensor
Clutch: Wet clutch, 7 steel disks
Max Power: 44.5 kW / 59.7 hp @ 8500 rpm
Max Torque: 50 Nm / 5.1 kgf-m / 36.9 lb-ft @ 5750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium alloy Perimeter with casting, moulded, extruded parts and structural carbon rods
Rake: 26.5 degrees
Trail: 110 mm / 4.3 in
Steering angle: 45 degrees/45 degrees
Front Suspension: 50 mm Upside down fork, fully adjustable
Front Wheel Travel: 310 mm / 12.2 in
Rear Suspension: Sachs mono shock absorber fully adjustable
Rear Wheel Travel: 310 mm / 12.2 in
Front Brakes: Single 260mm disc, wave
Rear Brakes: Single 220 mm disc, wave
Front Rim: 1.6 x 21 in
Rear Rim: 2.15 x 18 in
Front Tyre: 80/100-21
Rear Tyre: 140/80-18
Dimensions: Length: 2160 mm / 85.0 in Width: 810 mm / 31.9 in Height: 1240 mm / 48.8 in
Wheelbase: 1450 mm / 57.1
Seat Height: 960 mm / 37.8 in
Weight: 110 kg / 243 lbs
Fuel Capacity: 9 Litres / 2.4 US gal
Review: Top Speed

The post Benelli BX 570 Motard (2008) appeared first on MotorcycleSpecifications.com.

Benelli TRK 502X (2018)

admin — Thu, 06 Apr 2023 08:30:01 +0000

The Benelli TRK 502X is a 2018 motorcycle with a parallel twin engine, 499.6cc capacity, and liquid cooling system. It has a maximum power of 35.8 kW at 8500 rpm and maximum torque of 45 Nm at 5000 rpm. The motorcycle has a steel tube trellis frame, with a 50 mm USD fork front suspension and rear swing arm with central shock absorber suspension. It has dual 320 mm floating disc front brakes and single 260 mm disc rear brakes with ABS. The front wheel is 19 x 3.00 DOT D and the rear wheel is 17 x 4.25 DOT D, both with aluminum alloy rims and iron spokes. The motorcycle has a length of 2200 mm, width of 915 mm, and height of 1490 mm, with a wheelbase of 1525 mm and ground clearance of 220 mm. The seat height is 840 mm and dry weight is 213 kg. The fuel capacity is 20 liters, with a fuel reserve of 3 liters. Overall, the Benelli TRK 502X (2018) is a powerful and reliable motorcycle with a sleek design and advanced features.

Technical specifications:

Make Model: Benelli TRK 502X

Year: 2018 –
Engine: Parallel twin, DOHC, 8 valves
Capacity: 499.6 cc / 30.5 cu in
Bore x Stroke: 69 x 66.8 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Librication: Forced with wet sump
Exhaust: With catalytic converter and oxygen sensors
Induction: EFI with 37 mm throttle body
Emission: Euro 4
Ignition: ECU – TL1
Starting: Electric
Max Power: 35.8 kW / 48 hp @ 8500 rpm
Max Torque: 45 Nm / 4.59 kgf-m @ 5000 rpm
Clutch: Multidisc wet clutch
Transmission: 6-Speed
Final Drive: Chain
Frame: Steel tube trellis frame
Front Suspension: 50 mm USD fork, adjustable
Front Wheel Travel: 145 mm / 5.7 in
Rear Suspension: Rear swing arm with central shock absorber, spring preload, hydraulic rebound and compression setting adjustable
Rear Wheel Travel: 145 mm / 5.7 in
Front Brakes: Dual 320 mm floating discs, 4-piston calipers, ABS
Rear Brakes: Single 260 mm disc, 2-piston caliper, ABS
Front Wheel: Rim and hub in Aluminum alloy with iron spokes, 19 x 3.00 DOT D
Rear Wheel: Rim and hub in Aluminum alloy with iron spokes, 17 x 4.25 DOT D
Front Tyre: 110/80- R19 – M/C 59V
Rear Tyre: 150/70 – R17 M/C 69V
Dimensions: Length: 2200 mm / 86.6 in Width: 915 mm / 36 in Height: 1490 mm / 58.6 in
Wheelbase: 1525 mm / 60 in
Ground Clearance: 220 mm / 8.6 in
Seat Height: 840 mm / 33 in
Dry Weight: 213 kg / 469.5 lbs
Fuel Capacity: 20 Litres / 5.2 US gal
Fuel Reserve: 3 Litres / 0.8 US gal

The post Benelli TRK 502X (2018) appeared first on MotorcycleSpecifications.com.

Benelli BX (2014)

admin — Thu, 06 Apr 2023 07:53:19 +0000

The Benelli BX (2014) motorcycle boasts a four-stroke, transverse four-cylinder engine with 4 valves per cylinder, a capacity of 600cc and a compression ratio of 11.5:1. Its electronic fuel injection system has one injector per cylinder and it features a wet sump lubrication system. The motorcycle also has a catalytic converter and oxygen sensor included in the exhaust system, making it eco-friendly. It presents a maximum power of 82hp at 11,000rpm and a maximum torque of 55.5Nm at 8,000rpm. Both front and rear wheels are fitted with disc brakes, with the front having two 320mm floating discs and the rear having a single 240mm disc, both fitted with 4 and 2 piston calipers, respectively. The motorcycle uses an aluminium alloy frame with a front steel trestle and has a rear swing arm also made of aluminium alloy. Its wheels are aluminium alloy, with a front wheel size of 17 x 3.50 DOT-D and a rear wheel of 17 x 5.50 DOT-D. The Benelli BX (2014) also features a decomposable frame, rear suspension with hydraulic and spring preload adjustment, and a 6-speed transmission with a chain final drive. It has a fuel capacity of 26 litres and weighs 223kg, with a seat height of 800mm and dimensions of 2160mm x 800mm x 1180mm (L x W x H). This traditional-looking motorcycle has roused the interest of enthusiasts globally, with a review by Shifting Gears praising its performance and design.

Here Is Your First Look At The 2014 Benelli BN 600GT
Riding Impression: 2012 Benelli BN 600I & TREK Amazonas, Brazil Part II
Benelli Reveals A New Bikes Just Before EICMA

The Benelli BX (2014) motorcycle was released in 2014 in a sport version named “TNT 600GT” which was updated from the 2011 version “BN600GT”. The update included improved front soft forks, new brake callipers, a streamlined muffler protective cover, redesigned air filter cover, and improved components of the heating and cooling system. The four-stroke, transverse four-cylinder, double overhead camshaft, four valve per cylinder engine has a capacity of 600cc, a compression ratio of 11.5:1 and an electric ignition. The electronic fuel injection system has one injector for each cylinder, and uses a wet sump lubrication system. The motorcycle features an aluminum alloy frame with a swing arm and coil-over shock absorber, a six-speed transmission with a chain final drive, and 17-inch aluminum wheels. The front brake system has two 320mm floating discs and a four-piston caliper while the rear brake uses a single 240mm disc with a double-piston caliper. The powertrain is capable of producing 60 kilowatts or 82 horsepower at 11000 RPM while the maximal torque of 55.5 newton-meters (40.9 lb-ft) is achieved at a somewhat lower engine speed of 8000 RPM. The motorcycle has a length of 2,160 mm (85.0 inches), a width of 800 mm (31.5 inches), and a height of 1,180mm (46.5 inches). It has a seat height of 800mm (31.5 inches), ground clearance of 180mm (7.1 inches), and a wet weight of 223kg (492 pounds). It has a fuel capacity of 26 liters (6.87 US gallons). There have been no recent updates on the 2014 Benelli BX model.

Technical specifications:

Make Model: Benelli BN 600 GT / TNT 600GT

Year: 2014
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 600 cc / 36.6 cu in
Bore x Stroke: 65 x 45,2 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Electronic injection with 1 injector per cylinder
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection, 38 mm throttle bodies
Electric: Electric
Max Power: 60 kW / 82 hp @ 11000 rpm
Max Torque: 55.5 Nm / 5,66 kgf-m / 41 lb-ft @ 8000 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain
Primary Drive: 44/82
Gear Ratio: 1st 2.846 / 2nd 1.947 / 3rd 1.556 / 4th 1.333 / 5th 1.190 / 6th 1.083:1
Final Drive Ratio: 3.286
Frame: Decomposable frame, front steel trestle, rear aluminium alloy casting
Front Suspension: 50 mm Upside-down forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Rear swing arm in aluminum alloy, rear shock absorber with extension hydraulic and spring preload adjustment
Rear Wheel Travel: 123 mm / 4.8 in
Front Brakes: 2 x 320 mm floating discs, 4 piston caliper
Rear Brakes: Single 240mm disc, 2 piston caliper
Wheels: Aluminum alloy
Front Wheel: 17 x 3.50 DOT-D
Rear Wheel: 17 x 5.50 DOT-D
Front Tyre: 120/70-ZR17 58W
Rear Tyre: 180/55-ZR17 73W
Dimensions: Length: 2160 mm / 85.0 in Width: 800 mm / 31.5 in Height: 1180 mm / 46.5 in
Wheelbase: 1430 mm / 56.3 in
Seat Height: 800 mm / 31.5 in
Ground Clearance: 180 mm / 7.1 in
Wet Weight: 223 kg / 492 lbs
Fuel Capacity: 26 Litres / 7.1 US gal
Manuals: Owners, Parts, Wiring
Review: Shifting Gears

The post Benelli BX (2014) appeared first on MotorcycleSpecifications.com.

Benelli Tre (2013-14)

admin — Wed, 05 Apr 2023 23:24:08 +0000

The Benelli Tre-K 1130 is a motorcycle with a four-stroke, transverse three-cylinder engine with a capacity of 1130 cc. It has a liquid cooling system, an 11.5:1 compression ratio, and electronic injection with one injector per cylinder. The motorcycle has a maximum power of 92 kW/123 hp at 9000 rpm and a maximum torque of 115 Nm/11.4 kgm/67.9 lb-ft at 6250 rpm. The clutch is a wet clutch with hydraulic command, and the transmission is six-speed. The chain drive has a ratio of 16:37. The frame is a mixed solution with a front ASD steel tube trellis attached to a boxed rear section with aluminum alloy castings, and the subframe is an aluminum die-cast. The front suspension is a Marzocchi 50 mm upside-down fork damping, rebound, and spring pre-load adjustment. The rear suspension is an ASD steel tube trellis swingarm with Extreme Technology a single shock absorber. The front brakes have two 320 mm ~A discs and a 4-piston caliper, while the rear brake has a single 240 mm disc and a 2-piston caliper. The motorcycle has front and rear tires of 120/70-17 and 180/55-17, respectively. It has a wheelbase of 1515 mm, a seat height of 810 mm, a ground clearance of 140 mm, and a dry weight of 205 kg. The fuel capacity is 21.5 liters, and its average consumption is 5.6 L/100 km. The motorcycle can travel from standing 0-100 km/h/62 mph in 3.5 seconds and has a top speed of 221.4 km/h / 137.5 mph.

Technical specifications:

Make Model: Benelli Tre-K 1130

Year: 2013 – 14
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Electronic injection with 1 injector per cylinder
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection
Electric: Electric
Max Power: 92 kW / 123 hp @ 9000 rpm
Max Torque: 115 Nm / 11.4 kgm / 67.9 lb-ft @ 6250 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain drive, ratio 16:37
Primary Drive: 44/79
Gear Ratio: 1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27
Frame: Mixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings. Subframe: aluminium die-cast.
Front Suspension: Marzocchi 50 mm upside down fork damping, rebound and spring pre-load adjustment.
Rear Suspension: ASD steel tube trellis swingarm with Extreme Technology single shock absorber with adjustable rebound and spring preload.
Front Brakes: 2 x 320 mm ~A, discs 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 180/55-17
Dimensions: Length: 2183 mm / 85.9 in Width: 850 mm / 37.4 in Height: 1320 mm / 51.9 in
Wheelbase: 1515 mm / 59.6 in
Seat Height: 810 mm / 31.9 in
Ground Clearance: 140 mm / 5.7 in
Dry Weight: 205 kg / 451.9 lbs
Fuel Capacity: 21.5 Litres / 5.7 US gal
Consumption Average: 5.6 L/100 km / 17.9 km/l / 42.1 US mpg
Standing 1/4 Mile: 11.5 sec
Standing 0 – 100km/h / 62 mph: 3.5 sec
Standing 0 – 140km/h / 87 mph: 5.4 sec
Standing 0 – 200km/h / 124 mph: 9.9 sec
Acceleration 60-140 km/h: 6.8 sec
Top Speed: 221.4 km/h / 137.5 mph

The post Benelli Tre (2013-14) appeared first on MotorcycleSpecifications.com.

Benelli 125 Sport (1980)

admin — Wed, 05 Apr 2023 20:44:58 +0000

The Benelli 125 Sport (1980) motorcycle is a single-cylinder, two-stroke bike with a capacity of 120.6 cc. It has a compression ratio of 9.93:1 and uses petroil for lubrication at a 33:1 ratio. The ignition is a 6-volt flywheel magneto with a kick start. The maximum power is 7.3 kW at 7540 rpm, and the maximum torque is 11.43 Nm at 5200 rpm. The transmission is a 5-speed constant mesh, and the final drive is a chain. The front suspension consists of a telescopic fork with oil dampers and hydraulic, while the rear suspension is a swinging arm with oil-damped shocks, which are three-way adjustable. The front brakes are a single disc, and the rear brakes are a drum. The bike weighs 85 kg and has a fuel capacity of 10.5 L. It has an average consumption of 3.2 L/100 km and a top speed of 111 km/h.

Technical specifications:

Make Model: Benelli 125 Turismo

Year: 1980
Engine: Two stroke, single cylinder
Capacity: 120.6 cc / 7.4 cu in
Bore x Stroke: 56 x 49 mm
Compression Ratio: 9.93:1
Lubrication: Petroil, 33:1 ratio
Induction: Dell’Orto VHB 22BS
Ignition: Flywheel magneto 6 volt
Starting: Kick start
Max Power: 7.3 kW / 9.69 hp @ 7540 rpm
Max Torque: 11.43 Nm / 1.17 kgf-m / 8.44 lb-ft @ 5200 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed constant mesh
Final Drive: Chain
Overall Gear Ratios: 1st 24.84 / 2nd 13.53 / 3rd 11.65 / 4th 9.66 / 5th 8.03:1
Front Suspension: Telescopic fork, oil dampers, hydraulic
Rear Suspension: Swinging arm, oil damped shocks, 3-way adjustable
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 2.50-18
Rear Tyre: 2.75-18
Dry Weight: 85 kg / 187 lb
Fuel Capacity: 10.5 L / 2.8 US gal
Consumption Average: 3.2 L/100 km / 31 km/l / 74 US mpg
Standing 1/4 Mile: 18.6 sec
Top Speed: 111 km/h / 69 mph

The post Benelli 125 Sport (1980) appeared first on MotorcycleSpecifications.com.

Benelli TNT Titanium (2005-06)

admin — Wed, 05 Apr 2023 16:33:07 +0000

The Benelli TNT Titanium motorcycle was produced between 2005 and 2006, featuring a four-stroke, transverse three-cylinder DOHC engine with 4 valves per cylinder and a capacity of 1130cc. It had a compression ratio of 11.5:1 and a liquid cooling system, along with electronic injection with 1 injector per cylinder and electronic ignition. The bike had a maximum power of 101 kW or 131.3 hp at 9250 rpm and a maximum torque of 117 Nm or 11.9 kgf-m or 86.3 lb-ft at 6750 rpm. It had a 6-speed transmission and a final drive chain. The frame was front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminum alloy castings. The front suspension was a Marzocchi 50mm upside-down fork, ASD steel tube trellis, oscillating main fork and the rear suspension was a mono-shock absorber with adjustable extension and spring load. Front brakes included 2 x 320 mm discs and 4-piston calipers, while the rear brakes were a single 240mm disc with 2-piston calipers. The front tire was 120/70-ZR17 and the rear tire was 190/50-ZR17. The seat height was 820mm or 32.3 inches and the dry weight of the motorcycle was 193 kg or 426 lbs. It had a fuel capacity of 16 liters or 4.2 US gallons.

Technical specifications:

Make Model: Benelli TNT Titanium

Year: 2005-06
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Induction: Electronic injection with 1 injector per cylinder
Ignition: Electronic ignition
Starting: Electric
Max Power: 101 kW / 131.3 hp @ 9250 rpm
Max Torque: 117 Nm / 11.9 kgf-m / 86.3 lb-ft @ 6750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Front Suspension: Marzocchi 50mm upside down fork, ASD steel tube trellis, oscillating main fork
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70-ZR17
Rear Tyre: 190/50-ZR17
Seat Height: 820 mm / 32.3 in
Dry Weight: 193 kg / 426 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Benelli TNT Titanium (2005-06) appeared first on MotorcycleSpecifications.com.

Benelli 650 Tornado (1973-76)

admin — Wed, 05 Apr 2023 15:39:08 +0000

The Benelli 650 Tornado S is a motorcycle produced from 1973 to 1976. It features a parallel twin cylinder, four-stroke, OHV engine with a capacity of 642.8 cc and 2 valves per cylinder. The bore x stroke of the engine is 84 x 58 mm with a compression ratio of 8.0:1. The cooling system is air cooled and it has 2 Dell’Orto VHB 29 carbs for induction. It can start electrically or with a kick start. The maximum power output is 38.8 kW / 52 hp at 7200 rpm. The clutch is a multiplate, wet system and it has a 5-speed transmission with a chain final drive. Suspension is provided by Marzocchi tele-hydraulic front forks and a swinging arm with adjustable shocks at the rear. Braking is achieved with 4 leading shoe, drum brakes at the front and a drum brake at the rear. The front and rear tyres are 3.50-18 and 4.00-18, respectively. The dry weight of the bike is 210 kg / 463 lbs and fuel capacity is 17 litres or 4.5 US gallons.

Technical specifications:

Make Model: Benelli 650 Tornado S

Year: 1973 – 76
Engine: Parallel twin cylinders, four stroke, OHV, 2 valves per cylinder
Capacity: 642.8 cc / 39.2 cu in
Bore x Stroke: 84 x 58 mm
Compression Ratio: 8.0:1
Cooling System: Air cooled
Induction: 2 x Dell’Orto VHB 29 carbs
Starting: Electric and kick start
Max Power: 38.8 kW / 52 hp @ 7200 rpm
Clutch: Multiplate, wet
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi tele-hydraulic forks
Rear Suspension: Swinging arm, adjustable shocks
Front Brakes: Drum, 4 leading shoe
Rear Brakes: Drum
Front Tyre: 3.50 -18
Rear Tyre: 4.00 -18
Dry Weight: 210 kg / 463 lbs
Fuel Capacity: 17 L / 4.5 US gal

The post Benelli 650 Tornado (1973-76) appeared first on MotorcycleSpecifications.com.

Benelli TNT Naked (2004)

admin — Wed, 05 Apr 2023 14:24:22 +0000

The Benelli TNT 1130 Naked, released in 2004, boasts of a four-stroke transverse three-cylinder engine with DOHC and four valves per cylinder. The motorcycle has a capacity of 1130 cc or 69 cubic inches, and the engine runs on electronic injection with 1 injector per cylinder. The maximum power output is 101 kW or 135 hp at 9500 rpm while the maximum torque is 110 Nm or 11.2 kgf-m or 81.1 lb-ft at 7750 rpm. The bike also features a liquid-cooled cooling system with a wet sump lubrication system. The front suspension comprises of Marzocchi 50 mm diameter upside-down forks and the rear with a monoshock absorber with adjustable extension and spring load. The braking system consists of 2 x 320 mm discs with 4-piston calipers at the front and a single 240 mm disc with 2-piston calipers at the back. The motorcycle weighs 215 kg or 474 lbs while the fuel capacity is 16.5 L or 4.4 US gal. The Benelli TNT 1130 Naked comes in yellow, red, black, and green/silver, and the top speed is 243 km/h or 151 mph.

Technical specifications:

Make Model: Benelli TNT 1130 Naked

Year: 2004
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Oil: API SJ 15W/50 – synthetic
Oil Capacity: 4 L / 1.1 US gal
Induction: Electronic injection with 1 injector per cylinder
Ignition: Electronic
Battery: 12V, 10Ah
Starting: Electric
Max Power: 101 kW / 135 hp @ 9500 rpm
Max Torque: 110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 7750 rpm
Clutch: Oil bath
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 2.786 / 2nd 1.994 / 3rd 1.524 / 4th 1.304 / 5th 1.167 / 6th 0.926
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Rake: 23.5 degrees
Trail: 100 mm / 3.9 in
Front Suspension: Marzocchi 50 mm diameter upside down fork ASD steel tube trellis oscillating main fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Rear Wheel Travel: 115 mm / 4.5 in
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Wheels: Aluminium alloy, 5-spoke
Front Rim: 3.5 x 17 in
Front Tyre: 120/70-ZR17 (58W)
Rear Rim: 6.0 x 17 in
Rear Tyre: 190/55-ZR17 (73W)
Dimensions: Length: 2100 mm / 82.7 in Width: 900 mm / 35.4 in Height: 1050 mm / 41.3 in
Wheelbase: 1443 mm / 56.8 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 205 kg / 452 lbs
Wet Weight: 215 kg / 474 lbs
Gross Vehicle Weight Rating: 400 kg / 882 lbs
Fuel Capacity: 16.5 L / 4.4 US gal
Fuel Reserve: 5 L / 1.3 US gal
Consumption Average: 5.8 L/100 km / 17.2 km/lit / 40.5 US mpg
Standing 1/4 Mile: 11.0 sec
Top Speed: 243 km/h / 151 mph
Colours: Yellow, Red, Black, Green/silver

The post Benelli TNT Naked (2004) appeared first on MotorcycleSpecifications.com.

Benelli Tornado 1130 (2006-07)

admin — Wed, 05 Apr 2023 09:50:03 +0000

The Benelli Tornado Tre 1130 was a motorcycle produced between 2006 and 2007. It has a four-stroke, transverse three-cylinder engine with electronic injection and a capacity of 1130 cc. The engine produces a maximum power of 120 kW/163 hp at 10500 rpm and a maximum torque of 124 Nm/12.6 kgf-m/91.45 lb-ft at 8000 rpm. The bike also features a wet clutch with hydraulic command and six-speed transmission with chain drive. It has a mixed solution frame with a steel tube trellis at the front and an aluminium die-cast subframe. The front suspension is a Marzocchi upside-down stanchion fork 50mm, adjustable in compression and extension with spring pre-load while the rear suspension is an asymmetric swingarm with Extreme Technology single shock absorber. The bike has a front brake with 2 x 320mm discs and a rear brake with a single 240 mm disc. It has a wheelbase of 1419mm/55.9in, seat height of 807mm/31.8in, and a dry weight of 195kg/430lbs. The fuel capacity is 20.8 Litres/5.5 gal, and it has a ground clearance of 140mm/5.7in.

Technical specifications:

Make Model: Benelli Tornado Tre 1130

Year: 2006 – 07
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Electronic injection with 1 injector per cylinder
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection
Electric: Electric
Max Power: 120 kW / 163 hp @ 10500 rpm
Max Torque: 124 Nm / 12.6 kgf-m / 91.45 lb-ft @ 8000 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain drive, ratio 16:37
Primary Drive: 44/79
Gear Ratio: 1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27
Frame: Mixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings. Subframe: aluminium die-cast.
Front Suspension: Marzocchi upside down stanchion fork 50mm, adjustable in compression and extension with spring pre-load
Rear Suspension: Asymmetric swingarm, composed of cast aluminium and pressed in aluminium alloy, with Extreme Technology single shock absorber adjustable in compression, dual regulation for low and high speed damping andextension and spring pre-load.
Front Brakes: 2 x 320mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 190/50-17
Wheelbase: 1419 mm / 55.9 in
Seat Height: 807 mm / 31.8 in
Ground Clearance: 140 mm / 5.7 in
Dry Weight: 195 kg / 430 lbs
Fuel Capacity: 20.8 Litres / 5.5 gal

The post Benelli Tornado 1130 (2006-07) appeared first on MotorcycleSpecifications.com.

Benelli TNT 135 (2017)

admin — Wed, 05 Apr 2023 09:24:01 +0000

The Benelli TNT 135 for 2017 is a four-stroke, single-cylinder motorcycle with a 134.7 cc engine and a bore x stroke of 54 x 58.8 mm. It is oil-cooled and has a compression ratio of 9.8:1. The bike has electronic fuel injection with throttle body d.28 and an ignition of DELPHI MT 05. It has a maximum power of 9.5 kW/13 hp @ 9000 rpm and a maximum torque of 10.8 Nm/1.0 kgm @ 7000 rpm. The TNT 135 has a wet, multiplate clutch and a 5-speed transmission with a chain final drive ratio of 2.645:1. The frame is a trestle in steel tubes and the bike has an inverted 41 mm front fork and a swing arm with a lateral shock absorber with spring pre-load adjustment. The front brakes are a single 220 mm disc with a 2 piston caliper and the rear brakes are a single 190 mm disc with a 1 piston caliper. The wheels are aluminum alloy and the front and rear tyres are 120/70-ZR12 and 130/70 – ZR12 respectively. The bike is 1750 mm in length with a ground clearance of 160 mm and a seat height of 780 mm. It has a wet weight of 121 kg and a fuel capacity of 7.2 litres. The TNT 135 is Euro 4 emissions compliant and has a Catalytic converter and oxygen sensors.

Technical specifications:

Make Model: Benelli TNT 135

Year: 2017 –
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 134.7 cc / 8.2 cu-in
Bore x Stroke: 54 x 58.8 mm
Cooling System: oil cooled
Compression Ratio: 9.8:1
Lubrication: Wet sump
Exhaust: With catalytic converter and oxygen sensors
Emissions: Euro 4
Induction: Electronic fuel injection with throttle body d.28
Spark Plug: BOSCH A7RC
Ignition: DELPHI MT 05
Starting: Electric
Max Power: 9,5 kW / 13 hp @ 9000 rpm
Max Torque: 10,8 Nm / 1,0 kgm @ 7000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Final Drive Ratio: 2.645:1
Frame: Trestle in steel tubes
Front Suspension: 41 mm Inverted fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: swing arm with lateral shock absorber with spring pre-load adjustment
Front Brakes: Single 220mm disc 2 piston caliper
Rear Brakes: Single 190mm disc 1 piston caliper
Front Wheel: Aluminium alloy rim, 12 x MT 3.0 DOT
Rear Wheel: Aluminium alloy rim, 12 x MT 3.5 DOT
Front Tyre: 120/70-ZR12
Rear Tyre: 130/70 – ZR12
Dimensions: Length 1750 mm / 68.8 inHeight 1025 mm / 40.3 in
Ground Clearance: 160 mm / 6.2 in
Seat Height: 780 mm / 30.7 in
Wet Weight: 121 kg / 266.7 lbs
Fuel Capacity: 7.2 Litres / 1.9 US gal

The post Benelli TNT 135 (2017) appeared first on MotorcycleSpecifications.com.

Benelli Tornado 1130 (2010-12)

admin — Wed, 05 Apr 2023 09:03:59 +0000

The Benelli Tornado Tre 1130 motorcycle was manufactured between 2010 and 2012. The bike has a four-stroke, transverse three-cylinder engine with a capacity of 1130cc and a compression ratio of 11.5:1. It uses electronic injection with one injector per cylinder and has a wet sump lubrication system. The Tornado Tre 1130 has a maximum power output of 163hp at 10500rpm and a maximum torque of 124Nm at 8000rpm. The clutch is a wet clutch with hydraulic command and the transmission is a six-speed gearbox with a chain drive final drive. The frame is a mixed solution of ASD steel tube trellis and aluminium die-casting, with an asymmetric swingarm composed of cast aluminium and pressed in aluminium alloy. The front suspension is a Marzocchi upside-down stanchion fork and the rear suspension is an Extreme Technology single shock absorber that is adjustable in compression and extension with dual regulation for low and high-speed damping and spring pre-load. The Tornado Tre 1130 has a front brake system with two 320mm discs and a rear brake system with a single 240mm disc. The motorcycle has a wheelbase of 1419mm, a seat height of 807mm, and a ground clearance of 140mm. The bike weighs 195kg and has a fuel capacity of 20.8 litres.

Technical specifications:

Make Model: Benelli Tornado Tre 1130

Year: 2010 – 12
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Electronic injection with 1 injector per cylinder
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection
Electric: Electric
Max Power: 120 kW / 163 hp @ 10500 rpm
Max Torque: 124 Nm / 12.6 kgf-m / 91.45 lb-ft @ 8000 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain drive, ratio 16:37
Primary Drive: 44/79
Gear Ratio: 1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27
Frame: Mixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings. Subframe: aluminium die-cast.
Front Suspension: Marzocchi upside down stanchion fork 50mm, adjustable in compression and extension with spring pre-load
Rear Suspension: Asymmetric swingarm, composed of cast aluminium and pressed in aluminium alloy, with Extreme Technology single shock absorber adjustable in compression, dual regulation for low and high speed damping andextension and spring pre-load.
Front Brakes: 2 x 320mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 190/50-17
Wheelbase: 1419 mm / 55.9 in
Seat Height: 807 mm / 31.8 in
Ground Clearance: 140 mm / 5.7 in
Dry Weight: 195 kg / 430 lbs
Fuel Capacity: 20.8 Litres / 5.5 gal

The post Benelli Tornado 1130 (2010-12) appeared first on MotorcycleSpecifications.com.

Benelli 302R (2018)

admin — Wed, 05 Apr 2023 06:59:04 +0000

The Benelli 302R is a motorcycle model released in 2018 with a parallel twin, DOHC 8-valve engine and a 300 cc capacity. It has a compression ratio of 12.0:1 and a cooling system that uses liquid. This bike has an electronic fuel injection system with a 37 mm throttle body and NGK CR8E spark plugs. The 302R has a maximum power of 28.3 kW or 38 hp at 12000 rpm, while its maximum torque is 26 Nm or 2.8 kgf-m at 9000 rpm. It uses a wet clutch and a 6-speed transmission system with a final chain drive. This model has a steel tube trellis frame, front suspension with a 41 mm upside-down fork, and rear suspension with a swingarm with monoshock that is spring preload adjustable. The bike has a front braking system with dual 260 mm floating discs and 4-piston calipers, while the rear brake uses a single 240 mm disc and 2-piston caliper with ABS. The front and rear wheels are made of aluminum alloy and have DOT certification. The motorcycle has a length of 2175 mm, a width of 746 mm, and a height of 1146 mm, with a wheelbase of 1410 mm, ground clearance of 180 mm, and seat height of 790 mm. The dry weight of the motorbike is 180 kg with a fuel capacity of 14 Litres.

Technical specifications:

Make Model: Benelli 302R

Year: 2018
Engine: Parallel twin, DOHC, 8 valves
Capacity: 300 cc / 18.3 cu in
Bore x Stroke: 65 x 42.5 mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Exhaust: With catalytic converter and oxygen sensors, Euro 4 compliant
Induction: EFI with 37 mm throttle body
Ignition: ECU
Spark Plug: NGK CR8E
Starting: Electric
Max Power: 28.3 kW / 38 hp @ 12000 rpm
Max Torque: 26 Nm / 2.8 kgf-m @ 9000 rpm
Clutch: Wet clutch
Transmission: 6-Speed
Final Drive: Chain
Frame: Steel tube trellis frame
Front Suspension: 41 mm USD fork, adjustable
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swingarm with monoshock, spring preload adjustable
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Dual 260 mm floating discs, 4-piston calipers
Rear Brakes: Single 240 mm disc, 2-piston caliper, ABS
Front Wheel: MT 2.75 x 17 in DOT, Aluminium alloy
Rear Wheel: MT 4.00 x 17 in DOT, Aluminium alloy
Front Tyre: 110/70-ZR17
Rear Tyre: 150/60-ZR17
Dimensions: Length: 2175 mm / 85.6 in Width: 746 mm / 29.4 in Height: 1146 mm / 45.1 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 180 mm / 7.1 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 180 kg / 397 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Benelli 302R (2018) appeared first on MotorcycleSpecifications.com.

Benelli 250 Sport Special (1968-73)

admin — Wed, 05 Apr 2023 03:06:54 +0000

The Benelli 250 Sport Special motorcycle was produced from 1968-73 and features a single cylinder, 4-stroke horizontal engine with a capacity of 245.1 cc. It has a forced lubrication system with gear pump and a Dell’Orto UB 24BS2 carburetor as well as a multi-disc clutch and 5-speed transmission. The frame is a single tube, open cradle, steel design with telescopic front suspension and a rear swinging arm with hydraulic shock absorbers. The bike has drum brakes both front and rear, steel laced wire spokes, and 2.75-18 and 3.00-18 size tires. It has a length of 1940mm and a width of 830mm with a seat height of 710mm and dry weight of 108kg. The fuel capacity is 12.5L and its top speed is 140km/h.

Technical specifications:

Make Model: Benelli 250 Sport Special

Year: 1968 – 73
Engine: Horizontal single cylinder, 4-stroke
Capacity: 245.1 cc / 14.95 cu in
Bore x Stroke: 74 x 57 mm
Compression Ratio: 8.5:1
Lubrication: Forced with gear pump
Oil Capacity: 2 L / 2.1 US qts
Induction: Dell’Orto UB 24BS2 carburetor
Ignition: Flywheel with HV coil outer
Starting: Kick start
Max Power: 9.3 kW / 12.5 hp @ 8500 rpm
Clutch: Multi disc in oil bath
Transmission: 5 Speed
Final Drive: Chain
Frame: Single tube, open cradle, steel
Front Suspension: Telescopic fork
Rear Suspension: Swinging arm, hydraulic shock absorbers
Front Brakes: Drum, 175 mm
Rear Brakes: Drum, 125 mm
Wheels: Steel, laced wire spokes
Front Tyre: 2.75-18
Rear Tyre: 3.00-18
Dimensions: Length: 1940 mm / 76.4 in Width: 830 mm / 32.7 in Height: 970 mm / 38.2 in
Wheelbase: 1260 mm / 49.6 in
Ground Clearance: 150 mm / 5.9 in
Seat Height: 710 mm / 30.0 in
Dry Weight: 108 kg / 238 lbs
Fuel Capacity: 12.5 L / 3.3 US gal
Top Speed: 140 km/h / 87 mph

The post Benelli 250 Sport Special (1968-73) appeared first on MotorcycleSpecifications.com.

Benelli 600R (2015)

admin — Wed, 05 Apr 2023 02:41:10 +0000

The Benelli BN 600R motorcycle was released in 2015 and features a four-stroke, transverse four-cylinder engine with a capacity of 600cc. It has a compression ratio of 11.5:1 and an electronic injection with 4 throttle bodies. The maximum power output of the bike is 60 kW at 11000 rpm and it has a maximum torque of 55.5 Nm at 8000 rpm. The bike has a wet clutch with hydraulic command, a 6-speed transmission, and a chain final drive. The frame is decomposable with a front steel trestle and a rear aluminum alloy casting. It has a front suspension of 50 mm upside-down forks and a rear swing arm in aluminum alloy, with a rear shock absorber with extension hydraulic and spring preload adjustment. The front brakes are two 320 mm floating discs with a 4-piston caliper, while the rear brakes are a single 240mm disc with a 2-piston caliper. The motorcycle has aluminum alloy wheels with a front wheel size of 17 x 3.50 DOT-D and a rear wheel size of 17 x 5.50 DOT-D. It has a length of 2160 mm, a width of 800 mm, and a height of 1180 mm. Its wheelbase is 1480 mm and seat height is 800 mm. It has a ground clearance of 180 mm and a GVWR of 410 kg. The dry weight of the bike is 208 kg, while the wet weight is 220 kg. The fuel capacity is 15 Litres, with a fuel reserve of 3 Litres. The motorcycle is available in black, red, and gold colors.

Technical specifications:

Make Model: Benelli BN 600R

Year: 2015
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 600 cc / 36.6 cu in
Bore x Stroke: 65 x 45,2 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Electronic injection with 4 throttle bodies, 38 mm
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection, 38 mm throttle bodies
Electric: Electric
Max Power: 60 kW / 82 hp @ 11000 rpm
Max Torque: 55.5 Nm / 5,66 kgf-m / 41 lb-ft @ 8000 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain
Primary Drive: 44/82
Gear Ratio: 1st 2.846 / 2nd 1.947 / 3rd 1.556 / 4th 1.333 / 5th 1.190 / 6th 1.083:1
Final Drive Ratio: 3.286
Frame: Decomposable frame, front steel trestle, rear aluminium alloy casting
Rake: 24 degrees
Trail: 96 mm / 3.8 in
Front Suspension: 50 mm Upside-down forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Rear swing arm in aluminum alloy, rear shock absorber with extension hydraulic and spring preload adjustment
Rear Wheel Travel: 123 mm / 4.8 in
Front Brakes: 2 x 320 mm floating discs, 4 piston caliper
Rear Brakes: Single 240mm disc, 2 piston caliper
Wheels: Aluminum alloy
Front Wheel: 17 x 3.50 DOT-D
Rear Wheel: 17 x 5.50 DOT-D
Front Tyre: 120/70-ZR17 58W
Rear Tyre: 180/55-ZR17 73W
Dimensions: Length: 2160 mm / 85.0 in Width: 800 mm / 31.5 in Height: 1180 mm / 46.5 in
Wheelbase: 1480 mm / 58.2 in
Seat Height: 800 mm / 31.5 in
Ground Clearance: 180 mm / 7.1 in
GVWR: 410 kg / 904 lbs
Dry Weight: 208 kg / 459 lbs
Wet Weight: 220 kg / 485 lbs
Fuel Capacity: 15 Litres / 4.0 US gal
Fuel Reserve: 3 Litres / 0.8 US gal
Colours: Black, Red, Gold

The post Benelli 600R (2015) appeared first on MotorcycleSpecifications.com.

Benelli 125 Sport (1980)

admin — Wed, 05 Apr 2023 01:04:00 +0000

The Benelli 125 Sport motorcycle from 1980 had a two-stroke, twin cylinder engine with a capacity of 125cc. It had a compression ratio of 9.83:1 and was air/oil cooled. The bike had a Dell’Orto VHB 22BS induction system and a flywheel magneto 6 volt ignition. It was kick-started and had a wet, multiplate clutch with a 5-speed transmission and a chain final drive. The frame was a welded, tubular, twin-downtube cradle and the front suspension was telescopic and oil-damped. The rear suspension was a box-section swinging arm controlled by oil-damped, coil-sprung suspension units with 3 pre-load settings. The bike had 135mm drum brakes on both the front and rear wheels, with the rear brake being caliper type. The dimensions of the bike were 1971mm in length, 841mm in width, and 1120mm in height, with a wheelbase of 1285mm and a ground clearance of 229mm. The seat height was 813mm and the dry weight of the bike was 98kg. It had a fuel capacity of 8.5 litres and a top speed of 105km/h. The bike was available in red, black, green, blue, and yellow.

Technical specifications:

Make Model: Benelli 125 Enduro

Year: 1980
Engine: Two stroke, twin cylinder
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 56 x 49 mm
Compression Ratio: 9.83:1
Cooling System: Air/oil cooled
Induction: Dell’Orto VHB 22BS
Ignition: Flywheel magneto 6 volt
Starting: Kick start
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 1st 27.45 / 2nd 16.73 / 3rd 12.88 / 4th 10.67 / 5th 8.87:1
Frame: Welded, tubular, twin-downtube cradle.
Front Suspension: Telescopic, oil damped.
Rear Suspension: Box-section swinging arm controlled by oil-damped, coil-sprung suspension units with 3 pre-load settings.
Front Brakes: 135 mm Drum
Rear Brakes: 135 mm Drum, caliper type
Front Wheel: 2.50-21
Rear Wheel: 3.50-18
Dimensions: Length: 1971 mm / 77.6 in Width: 841 mm / 33.1 in Height: 1120 mm / 44.1 in
Wheelbase: 1285 mm / 50.6 in.
Ground Clearance: 229 mm / 9.0 in.
Seat height:: 813 mm / 32.0 in
Dry Weight: 98kg / 2161b.
Fuel Capacity: 8.5 Litres / 1.9 US gal.
Top Speed: 105 km/h / 65 mph
Colours: Red, Black, Green, Blue, Yellow

The post Benelli 125 Sport (1980) appeared first on MotorcycleSpecifications.com.

Benelli 250 Quatro (1975)

admin — Tue, 04 Apr 2023 17:34:58 +0000

The Benelli 250 Quattro motorcycle was released in 1975 and features a four-stroke, transverse four-cylinder, OHV engine with a capacity of 231.4cc. The motorcycle has a compression ratio of 11.5:1 and uses 2x26mm Dell’Orto carburetors for induction. The bike has a coil ignition and is started with a kick start. The Benelli 250 Quattro has a maximum power of 19.8 kW at 10500 rpm and a top speed of 145 km/h or 90 mph. It has five-speed transmission, a wet multidisc clutch, and a chain final drive. The front suspension features hydraulic telescopic forks while the rear has a swinging arm with double adjustable shocks and concentric springs. The front brakes consist of a single 260 mm disc while the rear has a drum measuring 156 mm. The motorcycle has cast alloy double three-spoke wheels and runs on a 3.00-18 front tire and a 3.25-18 rear tire. The bike has a dry weight of 125 kg and a fuel capacity of 11.5 liters or 3.0 US gallons. Overall, the Benelli 250 Quattro is a classic, powerful sports motorcycle with reliable technology and excellent handling.

Technical specifications:

Make Model: Benelli 250 Quattro

Year: 1975
Engine: Four stroke, transverse four cylinder, OHV
Capacity: 231.4 cc / 14.1 cu in
Bore x Stroke: 44 x 38 mm
Compression Ratio: 11.5:1
Cooling System: Air cooled
Induction: 2 x 26 mm Dell’Orto VHB carburetors
Ignition: Coil
Starting: Kick start
Max Power: 19.8 kW / 26.5 hp @ 10500 rpm
Clutch: Wet, multidisc
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic telescopic forks
Rear Suspension: Swinging arm with double adjustable shocks and concentric springs
Front Brakes: Single 260 mm Disc
Rear Brakes: Drum, 156 mm
Wheels: Cast alloy, double 3 spoke
Front Tyre: 3.00-18
Rear Tyre: 3.25-18
Dry Weight: 125 kg / 275 lbs
Fuel Capacity: 11.5 Litres / 3.0 US gal
Top Speed: 145 km/h / 90 mph

The post Benelli 250 Quatro (1975) appeared first on MotorcycleSpecifications.com.

Benelli 250 Cafe Racer (1975)

admin — Tue, 04 Apr 2023 17:14:58 +0000

The Benelli 250 Cafe Racer is a motorcycle that was produced in 1975. It is powered by a two-stroke, parallel twin engine with a capacity of 231.4 cc and a compression ratio of 10.0:1. The engine is air-cooled and lubricated with petroil in a 20:1 mixture, with induction provided by 2 Dell’Orto VHB carburetors and electronic ignition. The bike has 30 horsepower, a wet multidisc clutch, and 5-speed transmission with a final chain drive. Its frame is double cradle, tubular steel, and the front suspension is telescopic forks while the rear suspension is a swinging arm with double adjustable shocks and concentric springs. The front brakes are 2 x 260 mm discs, and the rear brake is a drum at 156 mm. The bike has a 1310 mm wheelbase and a dry weight of 125 kg. It has a fuel capacity of 11.5 Litres and can reach a top speed of 145 km/h. Overall, the Benelli 250 Cafe Racer is a classic motorcycle that offers a powerful, thrilling ride.

Technical specifications:

Make Model: Benelli 250 Caf~A(c) Racer

Year: 1975
Engine: Two stroke, parallel twin
Capacity: 231.4 cc / 14.1 cu in
Bore x Stroke: 56 x 47 mm
Compression Ratio: 10.0:1
Cooling System: Air cooled
Lubrication: Petroil, 20:1 mixture
Induction: 2 x 26 mm Dell’Orto VHB carburetors
Ignition: Electronic
Starting: Kick start
Max Power: 22.4 kW / 30 hp @ 6800 rpm
Clutch: Wet, multidisc
Transmission: 5 Speed
Final Drive: Chain
Frame: Double cradle, tubular steel
Front Suspension: Telescopic forks
Rear Suspension: Swinging arm with double adjustable shocks and concentric springs
Front Brakes: 2 x 260 mm Discs
Rear Brakes: Drum, 156 mm
Front Tyre: 3.00-18
Rear Tyre: 3.25-18
Wheelbase: 1310 mm / 51.6 in
Dry Weight: 125 kg / 275 lbs
Fuel Capacity: 11.5 Litres / 3.0 US gal
Top Speed: 145 km/h / 90 mph

The post Benelli 250 Cafe Racer (1975) appeared first on MotorcycleSpecifications.com.

Benelli 304 (1984-88)

admin — Tue, 04 Apr 2023 16:39:01 +0000

The Benelli 304 motorcycle was produced from 1984 to 1988 and featured a four-stroke transverse four-cylinder engine with a capacity of 231.4cc. The engine had two valves per cylinder, a compression ratio of 10.5:1, and was air-cooled with four Dell’Orto PHBG 18 B carburetors. The ignition was coil, distributor and the starting was electric, with an optional kick start. The max power of the bike was 27.8 hp at 10500 rpm and max torque was 18.8 Nm at 9000 rpm. The transmission had five speeds with a chain final drive. The frame was an open tubular frame with a load-bearing engine and the suspension had hydraulic forks in the front with a 30 mm radius and a swinging arm with hydraulic shocks in the rear. The front brake was a single 260 mm disc with a rear brake of a 158 mm drum. The bike had a top speed of 150 km/h or 93.4 mph with a dry weight of 134 kg or 295 lbs. The fuel capacity was 11 liters or 2.9 US gallons. The overall dimensions included a length of 1940 mm or 76.4 in, a width of 710 mm or 28.0 in, and a height of 950 mm or 37.4 in with a wheelbase of 1270 mm or 50.0 in.

Technical specifications:

Make Model: Benelli 304

Year: 1984 – 88
Engine: Four stroke, transverse four cylinder, OHV, 2 valves per cylinder
Capacity: 231.4 cc / 14.1 cu in
Bore x Stroke: 44 x 38 mm
Compression Ratio: 10.5:1
Cooling System: Air cooled
Oil Capacity: 2.5 L / 2.6 US qts
Exhaust: 4-into-2
Induction: 4 x Dell’Orto PHBG 18 B carburetors
Ignition: Coil, distributor
Starting: Electric (kick start optional)
Max Power: 20.1 kW / 27.8 hp @ 10500 rpm
Max Torque: 18.8 Nm / 1.92 kgf-m / 13.86 lbs-ft @ 9000 rpm
Transmission: 5 Speed
Final Drive: Chain
Frame: Open tubular frame, load bearing engine
Front Suspension: Hydraulic forks, 30 mm
Rear Suspension: Swinging arm with hydraulic shocks
Front Brakes: Single 260 mm disc
Rear Brakes: 158 mm Drum
Front Tyre: 3.75 -18
Rear Tyre: 3.00 -18
Dimensions: Length: 1940 mm / 76.4 in Width: 710 mm / 28.0 in Height: 950 mm / 37.4 in
Wheelbase: 1270 mm / 50.0 in
Dry Weight: 134 kg / 295 lbs
Fuel Capacity: 11 Litres / 2.9 US gal
Top Speed: 150 km/h / 934 mph

The post Benelli 304 (1984-88) appeared first on MotorcycleSpecifications.com.

Benelli Due 756 (2012)

admin — Tue, 04 Apr 2023 15:52:02 +0000

The Benelli Due 756 is a 2012 motorcycle with an inline twin, 754 cc engine that uses electronic injection with one injector per cylinder. It has a maximum power of 72 kW and torque of 64 Nm. The frame is made of aluminum, and the front suspension is an upside-down fork, while the rear is an aluminum swingarm with a mono-shock that’s adjustable. The brakes are twin 320 mm discs at the front and a single 240 mm disc at the rear, with the wheels made of aluminum alloy. The front tire size is 120/70 x ZR17, and the rear is 180/55 x ZR17, with a length of 2022 mm and width of 790 mm. The wheelbase is 805 mm, and the ground clearance is 99 mm. Bikepoint provides an overview of this motorcycle model.

Technical specifications:

Make Model: Benelli Due 756

Year: 2012
Engine: Inline twin, 4-stroke, DOHC, 4 valves per cylinder
Capacity: 754 cc / 46.0 cu in
Bore x Stroke: 88 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Induction: Electronic injection with one injector per cylinder
Starting: Electric
Max Power: 72 kW / 97 ph @ 10 000 rpm
Max Torque: 64 Nm / 6.5 kgf-m / 47.2 lb-ft @ 8000 rpm
Clutch: Wet, multiplate
Transmission: 6 Speed
Frame: Aluminium beam twin spar
Front Suspension: Upside down fork, 50 mm
Rear Suspension: Aluminium swongarm, mono shock, adjustable
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Twin 320 mm discs, Brembo, radially mounted 4-piston calipers
Rear Brakes: Single 240 mm disc, Brembo, 2 piston caliper
Wheels: Aluminium alloy
Front Tyre: 120/70 x ZR17
Rear Tyre: 180/55 x ZR17
Dimensions: Length: 2022 mm / 79.6 in Width: 790 mm / 31.1 in
Wheelbase: 805 mm / 31.7 in
Ground Clearance: 99 mm / 3.9 in
Overview: Bikepoint

The post Benelli Due 756 (2012) appeared first on MotorcycleSpecifications.com.

Benelli 125 Sport (2009)

admin — Tue, 04 Apr 2023 13:41:06 +0000

The Benelli 125 Sport is a 125cc motorcycle produced by the Italian manufacturer, Benelli. It was first introduced in 2009 and is a popular choice among riders who want a sporty and stylish motorcycle that is easy to handle and affordable.

The Benelli 125 Sport is powered by a single-cylinder, four-stroke engine that delivers 11 horsepower and has a top speed of around 60 miles per hour. It has a compact frame and weighs just 119 kg, making it agile and nimble in traffic and on twisty roads.

The suspension on the Benelli 125 Sport is composed of a traditional fork in the front and a monoshock in the rear. The brakes are powerful and responsive, with a single disc in the front and a drum in the rear.

The styling of the Benelli 125 Sport is inspired by its bigger brothers, the TNT and Tornado models. It has a sculpted fuel tank, a low profile seat, and a twin headlight setup that gives it a distinctive and aggressive look. The color scheme is typically Benelli, with a combination of black, silver, and red accents.

The Benelli 125 Sport is designed for riders who want a fun and engaging motorcycle that is perfect for commuting, city riding, and weekend trips. It is easy to ride, fuel-efficient, and comes with a 2-year warranty that covers parts and labor.

Overall, the Benelli 125 Sport is a solid choice for anyone looking for an affordable and stylish 125cc motorcycle that offers a good balance of performance, comfort, and style.

Technical specifications:

The post Benelli 125 Sport (2009) appeared first on MotorcycleSpecifications.com.

Benelli 125 Sport (2005)

admin — Tue, 04 Apr 2023 12:21:14 +0000

The Benelli 125 Sport is a motorcycle model that was released in the year 2005. It was manufactured by the Italian motorcycle company, Benelli, which has been in operation since 1911. The 125 Sport is a lightweight, sports bike that is designed for speed and maneuverability.

One of the key features of the Benelli 125 Sport is its engine. It is powered by a liquid-cooled, single-cylinder, four-stroke engine that has a displacement of 124cc. This engine produces a maximum power output of 11.4 horsepower and a maximum torque output of 9.6 Nm.

The 125 Sport also has a number of other features that make it a popular choice among motorcycle enthusiasts. These include its six-speed transmission system, its lightweight design, and its sporty styling. The bike also has a top speed of approximately 85 miles per hour (136 kilometers per hour), which makes it a suitable bike for riders who enjoy speed.

Overall, the Benelli 125 Sport is a reliable and stylish motorcycle that is often favored by individuals who want a bike that is both fast and agile. Its lightweight design and powerful engine make it a popular choice for riders who enjoy sports biking.

Technical specifications:

The post Benelli 125 Sport (2005) appeared first on MotorcycleSpecifications.com.

Benelli 125 Sport (2005)

admin — Tue, 04 Apr 2023 06:26:50 +0000

Sorry, it is not possible for me to summarize content without the content itself. Please provide me with the content to summarize.

Technical specifications:

The post Benelli 125 Sport (2005) appeared first on MotorcycleSpecifications.com.

Benelli 654 S Tornado (1980)

admin — Tue, 04 Apr 2023 00:05:03 +0000

The Benelli 654 Turismo was a motorcycle produced in 1980. It had a four-stroke, transverse four-cylinder DOHC engine with a 603.9 cc capacity and 2 valves per cylinder. It had four 22mm Dell’Orto carbs and a compression ratio of 9.3:1. The bike was air-cooled and had an ignition system with mechanical breaker points. The bike also had an electric start. The maximum power of the motorcycle was 44.7 kW or 60 hp at 8700 rpm, while the maximum torque was 5.1 Nm or 5.1 kgf-m or 37 ft-lb at 7000 rpm. It had a wet sump clutch and a 5-speed transmission. The bike had a chain for the final drive, as well as a tele-hydraulic fork for the front suspension and a swinging arm with adjustable shocks for the rear suspension. The front brakes consisted of 2 x 265 mm discs while the rear brakes had a single 260 mm disc. The wet weight of the bike was 190.5 kg or 420 lbs and it had a fuel capacity of 12 liters or 3.2 US gallons.

Technical specifications:

Make Model: Benelli 654 Turismo

Year: 1980
Engine: Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder
Capacity: 603.9 cc / 36.9 cu in
Bore x Stroke: 60 x 53.4 mm
Compression Ratio: 9.3:1
Cooling System: Air cooled
Induction: 4 x 22mm Dell’Orto carbs
Ignition: Mechanical breaker points
Starting: Electric
Max Power: 44.7 kW / 60 hp @ 8700 rpm
Max Torque: 5.1 Nm / 5.1 kgf-m / 37 ft-lb @ 7000 rpm
Clutch: Wet sump
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Tele-hydraulic forks
Rear Suspension: Swinging arm, adjustable shocks
Front Brakes: 2 x 265 mm discs
Rear Brakes: Single 260 mm disc
Front Tyre: 3.25 -18
Rear Tyre: 3.50 -18
Wet Weight: 190.5 kg / 420 lbs
Fuel Capacity: 12 Litres / 3.2 US gal

The post Benelli 654 S Tornado (1980) appeared first on MotorcycleSpecifications.com.

Benelli TNT Sport (2005-06)

admin — Mon, 03 Apr 2023 17:46:13 +0000

The Benelli TNT 1130 Sport was a motorcycle model released in 2005-06. Its engine was a four-stroke, transverse three-cylinder with 1130 cc of capacity, and a compression ratio of 11.5:1. The motorcycle had a maximum power of 96.9kW/130hp at 9500 rpm and maximum torque of 117 Nm/86.3 lb-ft at 7750 rpm. It had a six-speed transmission and a chain final drive. The motorcycle was equipped with Marzocchi 50 mm diameter upside-down fork and a mono-shock absorber with adjustable extension and spring load. The front brakes were two 320 mm discs with four-piston calipers, while the rear brake was a single 240 mm disc with a two-piston caliper. The Benelli TNT 1130 Sport had an aluminum alloy, 10-spoke wheel with a front rim of 3.5 x 17 in and a rear rim of 6.0 x 17 in. The motorcycle weighed 199 kg/439 lbs and had a fuel capacity of 16.5 L/4.4 US gal with a fuel reserve of 5 L/1.3 US gal. Its standing 1/4 mile time was 12 seconds and its top speed was 253 km/h/157 mph. The Benelli TNT 1130 Sport had a front ASD steel tube trellis oscillating main fork with a 25-degree rake and a trail of 96mm/3.7 in. The motorcycle had a length of 2100 mm/82.7 in, a width of 790 mm/31.1 in, and a wheelbase of 1443 mm/56.8 in. Its seat height was 780 mm/30.7 in. The motorcycle had a liquid cooling system, wet sump lubrication, and used API SJ 15W/50 synthetic oil with an oil capacity of 4 L/1.1 US gal. The motorcycle had a catalytic converter and oxygen sensor exhaust and electronic injection with one injector per cylinder.

Technical specifications:

Make Model: Benelli TNT 1130 Sport

Year: 2005 – 06
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Oil: API SJ 15W/50 – synthetic
Oil Capacity: 4 L / 1.1 US gal
Exhaust: With catalytic converter and oxygen sensor
Induction: Electronic injection with 1 injector per cylinder
Ignition: Electronic
Spark plug: NGK CR9E
Battery: 12V, 10Ah
Starting: Electric
Max Power: 96.9 kW kW / 130 hp @ 9500 rpm
Max Torque: 117 Nm / 11.9 kgf-m / 86.3 lb-ft @ 7750 rpm
Clutch: Wet
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 2.786 / 2nd 1.994 / 3rd 1.524 / 4th 1.304 / 5th 1.167 / 6th 0.926
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Rake: 25 degrees
Trail: 96 mm / 3.7 in
Front Suspension: Marzocchi 50 mm diameter upside down fork ASD steel tube trellis oscillating main fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Rear Wheel Travel: 115 mm / 4.5 in
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Wheels: Aluminium alloy, 10-spoke
Front Rim: 3.5 x 17 in
Front Tyre: 120/70-ZR17 (58W)
Rear Rim: 6.0 x 17 in
Rear Tyre: 190/55-ZR17 (73W)
Dimensions: Length: 2100 mm / 82.7 in Width: 790 mm / 31.1 in
Wheelbase: 1443 mm / 56.8 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 199 kg / 439 lbs
Fuel Capacity: 16.5 L / 4.4 US gal
Fuel Reserve: 5 L / 1.3 US gal
Standing 1/4 mile: 12 sec
Top Speed: 253 km/h / 157 mph

The post Benelli TNT Sport (2005-06) appeared first on MotorcycleSpecifications.com.

Benelli Tre-K 1130 Amazonas (2009-10)

admin — Mon, 03 Apr 2023 17:16:03 +0000

The Benelli Tre-K 1130 Amazonas is a motorcycle produced between 2009 to 2010. It is equipped with a four-stroke, transverse three-cylinder engine, and has a 1130cc/69cu in capacity. The engine has a compression ratio of 11.5:1 and is liquid-cooled. The bike also features electronic injection with 1 injector per cylinder, with a maximum power of 92 kW / 123 hp @ 9000 rpm and a maximum torque of 115 Nm / 11.4 kgm / 67.9 lb-ft @ 6250 rpm. The motorcycle has a six-speed transmission and a wet clutch with hydraulic command. It also features front and rear suspension, 2 x 320 mm discs with 4-piston calipers for front brakes, and a single 220 mm disc with 2-piston calipers for rear brakes. The dimensions are 2200 mm length, 850 mm width, and 1340 mm height, with a wheelbase of 1530 mm and a seat height of 840 mm. The dry weight is 208 kg, and it has a fuel capacity of 22 L/5.8 US gal. The Benelli Tre-K 1130 Amazonas has a top speed of 223.7 km/h (139 mph) and a consumption average of 5.6 L/100 km/17.7 km/l/41.6 US mpg. The Cycletorque reviewed the bike positively.

Technical specifications:

Make Model: Benelli Tre-K 1130 Amazonas

Year: 2009 – 10
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Electronic injection with 1 injector per cylinder
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection
Electric: Electric
Max Power: 92 kW / 123 hp @ 9000 rpm
Max Torque: 115 Nm / 11.4 kgm / 67.9 lb-ft @ 6250 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain drive, ratio 16:37
Primary Drive: 44/79
Gear Ratio: 1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27
Frame: ASD Steel tube trellis, aluminium coast alloy
Front Suspension: 50mm Marzocchi upside-down forks
Front Wheel Travel: 180 mm / 7.09 in
Rear Suspension: ASD Steel tube trellis swingarm extreme technologies single shock adjustable for rebound and spring preload
Rear Wheel Travel: 180 mm / 7.09 in
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 220 mm disc, 2 piston calipers
Front Tyre: 110/80 ZR19
Rear Tyre: 150/70 ZR17
Dimensions: Length: 2200 mm / 86.6 in Width: 850 mm / 37.4 in Height: 1340 mm / 52.7 in
Wheelbase: 1530 mm / 60.2 in
Seat Height: 840 mm / 33.0 in
Ground Clearance: 170 mm / 6.6 in
Dry Weight: 208 kg / 458.5 lbs
Fuel Capacity: 22 L / 5.8 US gal
Consumption Average: 5.6 L/100 km / 17.7 km/l / 41.6 US mpg
Standing 1/4 Mile: 11.7 sec
Top Speed: 223.7 km/h / 139 mph
Review: Cycletorque

The post Benelli Tre-K 1130 Amazonas (2009-10) appeared first on MotorcycleSpecifications.com.

Benelli Tornado 302 (2016-17)

admin — Mon, 03 Apr 2023 13:15:05 +0000

The Benelli Tornado 302 is a motorcycle model that was available from 2016 to 2017. It has a parallel twin engine with a capacity of 300 cc and a maximum power of 35.4 horsepower at 12000 rpm. The bike has a 6-speed transmission, a chain final drive, and a trellis frame made of steel tubes. The front suspension consists of a 41 mm USD fork that is adjustable, while the rear suspension is a swingarm with monoshock that is spring preload adjustable. The front brakes are dual 260 mm floating discs with 4-piston calipers, and the rear brake is a single 240 mm disc with a 2-piston caliper and ABS. The wheels are made of aluminum alloy and the front and rear tires are 110/70-ZR17 and 150/60-ZR17, respectively. The bike has a length of 2175 mm, a width of 746 mm, a height of 1146 mm, and a wheelbase of 1410 mm. The ground clearance is 180 mm and the seat height is 790 mm. The dry weight of the bike is 180 kg and it has a fuel capacity of 14 L.

Technical specifications:

Make Model: Benelli Tornado 302

Year: 2016 – 17
Engine: Parallel twin, DOHC, 8 valves
Capacity: 300 cc / 18.3 cu in
Bore x Stroke: 65 x 42.5 mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Exhaust: With catalytic converter and oxygen sensors, Euro 4 compliant
Induction: EFI with 37 mm throttle body
Ignition: ECU
Spark Plug: NGK CR8E
Starting: Electric
Max Power: 26 kW / 35.4 hp @ 12000 rpm
Max Torque: 27 Nm / 2.8 kgf-m @ 9000 rpm
Clutch: Wet clutch
Transmission: 6-Speed
Final Drive: Chain
Frame: Steel tube trellis frame
Front Suspension: 41 mm USD fork, adjustable
Front Wheel Travel: 120 mm / 4.7″
Rear Suspension: Swingarm with monoshock, spring preload adjustable
Rear Wheel Travel: 120 mm / 4.7″
Front Brakes: Dual 260 mm floating discs, 4-piston calipers.
Rear Brakes: Single 240 mm disc, 2-piston caliper, ABS
Front Wheel: MT 2.75 x 17″ DOT, Aluminium alloy
Rear Wheel: MT 4.00 x 17″ DOT, Aluminium alloy
Front Tyre: 110/70-ZR17
Rear Tyre: 150/60-ZR17.
Dimensions: Length: 2175 mm / 85.6″ Width: 746 mm / 29.4″ Height: 1146 mm / 45.1″
Wheelbase: 1410 mm / 55.5″
Ground Clearance: 180 mm / 7.1″
Seat Height: 790 mm / 31.1″
Dry Weight: 180 kg / 397 lbs
Fuel Capacity: 14 L / 3.7 US gal

The post Benelli Tornado 302 (2016-17) appeared first on MotorcycleSpecifications.com.

Benelli 900 Sei (1978)

admin — Mon, 03 Apr 2023 10:30:04 +0000

The Benelli 900 Sei is a 1978 motorcycle with a four-stroke, transverse six-cylinder engine with a capacity of 906cc. The bike has a compression ratio of 9.5:1 and is air-cooled with a 6-into-2 exhaust system. It has a max power of 58.3 kW/80 hp at 8400 rpm and is equipped with a 5-speed transmission and chain final drive. The front suspension is telescopic forks, and the rear suspension is dual shocks spring five-way preload adjustable, while the front brakes consist of 2 x 294 mm discs, and the rear brakes consist of a single 255 mm disc. The wet weight of the bike is 254 kg/560 lbs, and the fuel capacity is 16.5 litres/4.4 US gallons. The average consumption of the bike is 5.7 L/100 km/17.6 km/l/41.4 mpg, while it can brake from 100 km/h/67 mph to 0 in 34.4 meters/113 feet. The standing quarter-mile time for the bike is 13.3 seconds, with a top speed of 198.8 km/h/120.4 mph.

Technical specifications:

Make Model: Benelli 900 Sei

Year: 1978
Engine: Four stroke, transverse six cylinders, SOHC, 2 valve per cylinder
Capacity: 906 cc / 55.3 cu in
Bore x Stroke: 60 x 53.4 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Exhaust: 6-into-2
Induction: 3 x 24 mm Dell’Orto carburetors
Ignition: Electronic
Starting: Electric
Max Power: 58.3 kW / 80 hp @ 8400 rpm
Transmission: 5 Speed
Fianl Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks spring 5-way preload adjustable
Front Brakes: 2 x 294 mm discs, 2 piston calipers
Rear Brakes: Single 255 mm disc, 1 piston caliper
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Wet Weight: 254 kg / 560 lbs
Fuel Capacity: 16.5 Litres / 4.4 US gal
Consumption Average: 5.7 L/100 km / 17.6 km/l / 41.4 mpg
Braking 100 km/h / 67 mph – 0: 34.4 m / 113 ft
Standing 1/4 Mile: 13.3 sec / 160.6 km/h / 99.8 mph
Top Speed: 198.8 km/h / 120.4 mph

The post Benelli 900 Sei (1978) appeared first on MotorcycleSpecifications.com.

Benelli 900 Sei Sport (1983)

admin — Mon, 03 Apr 2023 05:59:56 +0000

The Benelli 900 Sei Sport is a large, six-cylinder motorcycle that was produced in 1983. It has a four-stroke engine with a capacity of 906cc and a compression ratio of 9.5:1. The bike is air-cooled and has an electronic ignition system, as well as a 5-speed transmission and a chain final drive. Front suspension is provided by telescopic forks, while the rear suspension is a dual-shocks spring 5-way preload adjustable setup. Braking power is provided by two front discs and a single rear disc with piston calipers. The bike has a wet weight of 254 kg and a fuel capacity of 16.5 liters. It averages 5.7 L/100 km, or 17.6 km/l, or 41.4 mpg. The bike can brake from 100 km/h to 0 in 34.4 meters and has a top speed of 198.8 km/h.

Technical specifications:

Make Model: Benelli 900 Sei

Year: 1983
Engine: Four stroke, transverse six cylinders, SOHC, 2 valve per cylinder
Capacity: 906 cc / 55.3 cu in
Bore x Stroke: 60 x 53.4 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Exhaust: 6-into-2
Induction: 3 x 24 mm Dell’Orto carburetors
Ignition: Electronic
Starting: Electric
Max Power: 58.3 kW / 80 hp @ 8400 rpm
Transmission: 5 Speed
Fianl Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks spring 5-way preload adjustable
Front Brakes: 2 x 294 mm discs, 2 piston calipers
Rear Brakes: Single 255 mm disc, 1 piston caliper
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Wet Weight: 254 kg / 560 lbs
Fuel Capacity: 16.5 Litres / 4.4 US gal
Consumption Average: 5.7 L/100 km / 17.6 km/l / 41.4 mpg
Braking 100 km/h / 67 mph – 0: 34.4 m / 113 ft
Standing 1/4 Mile: 13.3 sec / 160.6 km/h / 99.8 mph
Top Speed: 198.8 km/h / 120.4 mph

The post Benelli 900 Sei Sport (1983) appeared first on MotorcycleSpecifications.com.

Benelli TNT Naked (2008-09)

admin — Mon, 03 Apr 2023 04:17:58 +0000

The Benelli TNT Naked was a motorcycle produced in 2008-2009 with a four-stroke, transverse three-cylinder engine with a capacity of 899cc. The compression ratio is 12.5:1, and it is liquid-cooled with electronic injection and ignition. It has a max power of 72kW and max torque of 90Nm, and is equipped with a 6-speed transmission and chain final drive. The front suspension includes a Marzocchi 50mm diameter fork, and the rear suspension is a mono shock absorber. The front brakes are dual 320mm discs with 4-piston calipers, and the rear brake is a single 240mm disc with a 2-piston caliper. The front and rear tires are 120/70ZR17 and 190/50ZR17, respectively, and the seat height is 790mm. The motorcycle has a dry weight of 199kg and a fuel capacity of 16 litres. The color of the Benelli TNT Naked is black.

Technical specifications:

Make Model: Benelli TNT 899

Year: 2008-09
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 899 cc / 54.9 cu in
Bore x Stroke: 88 x 49.2 mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Exhaust: 3-into-1, underseat
Induction: Electronic injection with 1 injector per cylinder
Ignition: Electronic
Starting: Electric
Max Power: 72 kW / 98 hp @ 9000 rpm
Max Torque: 90 Nm / 9.2 kgf-m / 66.4 lb-ft @ 5000 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Front ASD steel tube trellis, fastened with drawer screws to boxed rear section, aluminium alloy castings.
Front Suspension: Marzocchi 50mm diameter upside down fork, ASD steel tube trellis oscillating main fork
Rear Suspension: Mono shock absorber with adjustable extension and spring load
Front Brakes: 2 x 320 mm discs, 4 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70 -ZR17
Rear Tyre: 190/50 -ZR17
Seat Height: 790 mm / 31.1 in
Dry Weight: 199 kg / 439 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Colour: Black

The post Benelli TNT Naked (2008-09) appeared first on MotorcycleSpecifications.com.

Benelli Tornado Naked T (2016)

admin — Mon, 03 Apr 2023 03:42:05 +0000

The Benelli Tornado Naked T motorcycle was released in 2016 and comes with either a 124.8 cc or 134.7 cc four-stroke, single-cylinder engine with SOHC, twin spark, and 4 valves. It has a compression ratio of either 9.6:1 or 9.8:1, and is air-cooled with wet sump lubrication. The motorcycle is Euro 4 compliant with a catalytic converter and oxygen sensors. It also has EFI with a 28mm throttle body and Delphi MT 05 ignition. The maximum power output ranges from 8.6 kW to 9.3 kW while the maximum torque ranges from 10.0 Nm to 10.8 Nm. It has a wet clutch and a 5-speed transmission with chain final drive. The frame is made of steel tube trellis and the suspension consists of a 41 mm USD fork in the front and a swingarm with a lateral shock absorber with adjustable spring pre-load in the rear. The front brakes have a single 220 mm steel disc with a 2-piston caliper, while the rear brakes have a single 190 mm disc with a single piston caliper. The front and rear wheels are made of aluminum alloy with DOT certification, and the front and rear tires are 120/70-ZR12 and 130/70-ZR12, respectively. The motorcycle has a length of 1840 mm, a width of 755 mm, and a height of 1025 mm with a wheelbase of 1215 mm. The dry weight is 121 kg and the fuel capacity is 7.2 L.

Technical specifications:

Make Model: Benelli Tornado Naked T

Year: 2016
Engine: Four stroke, single cylinder, SOHC, twin spark, 4 valves
Capacity: 124.8 cc / 7.6 cu in or 134.7 cc / 8.2 cu in
Bore x Stroke: 54 x 54.5 mm or 54 x 58.8 mm
Compression Ratio: 9.6:1 or 9.8:1
Cooling System: Air cooled
Lubrication: Wet sump
Exhaust: With catalytic converter and oxygen sensors, Euro 4 compliant
Induction: EFI with 28 mm throttle body
Ignition: Delphi MT 05
Spark Plug: TORCH A7RC
Starting: Electric
Max Power: 8.6 kW / 11.7 hp @ 9000 rpm or 9.3 kW / 12.6 hp @ 9000 rpm
Max Torque: 10.0 Nm / 1.0 kgf-m @ 7000 rpm or 10.8 Nm / 1.1 kgf-m @ 7000 rpm
Clutch: Wet clutch
Transmission: 5 speed
Final Drive: Chain
Frame: Steel tube trellis
Front Suspension: 41 mm USD fork
Front Wheel Travel: 120 mm / 4.7″
Rear Suspension: Swingarm with lateral shock absorber, adjustable spring pre-load
Rear Shock Stroke: 50 mm / 2.0″
Front Brakes: Single 220 mm steel disc, 2 piston caliper
Rear Brakes: Single190 mm disc, single piston caliper
Front Wheel: MT 3.00 x 12″ DOT, aluminium alloy
Rear Wheel: MT 3.50 x 12″ DOT, aluminium alloy
Front Tyre: 120/70-ZR12
Rear Tyre: 130/70-ZR12
Dimensions: Length: 1840 mm / 72.4″ Width: 755 mm / 29.7″ Height: 1025 mm / 40.4″
Wheelbase: 1215 mm / 47.8″
Ground Clearance: 160 mm / 6.3″
Seat Height: 780 mm / 30.7″
Dry Weight: 121 kg / 267 lbs
Fuel Capacity: 7.2 L / 1.9 US gal

The post Benelli Tornado Naked T (2016) appeared first on MotorcycleSpecifications.com.

Benelli Tornado 1130 (2013)

admin — Mon, 03 Apr 2023 00:37:31 +0000

The 2013 Benelli Tornado 1130 motorcycle has a four-stroke transverse three-cylinder engine with a capacity of 1130. The liquid-cooled engine has a compression ratio of 11.2:1 and is electronically injected with one injector per cylinder. The bike has a maximum power of 95 kW/129 hp at 8500 rpm with a maximum torque of 110 Nm/11.2 kgm/81.1 lb-ft at 5250 rpm. The motorcycle has a wet clutch with hydraulic command and a six-speed transmission with a ratio of 16:37. The front suspension is an upside-down fork with hydraulic extension, compression, and spring preload adjustments, while the rear suspension is a steel tube trestle swingarm with a rear dumper with hydraulic adjustment and spring preload assembled with progressive link. The bike weighs 205 kg / 452 lbs when it is dry and 215 kg / 474 lbs when it is wet. The bike has a fuel capacity of 16 liters / 4.2 US gal. The dimensions of the bike are 2000 mm / 78.7 in in length, 790 mm / 31.1 in in width, and 1050 mm / 41.3 in in height. The wheelbase is 1419 mm / 55.9 in, the seat height is 830 mm / 32.7 in, and the ground clearance is 135 mm / 5.3 in. The front brakes are two 320 mm discs with a 4-piston caliper, and the rear brakes are a single 240 mm disc with a 2-piston caliper. The front tire size is 120/70-17, and the rear tire size is 190/50-17.

Technical specifications:

Make Model: Benelli TNT 1130

Year: 2013
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130
Bore x Stroke: 88 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.2:1
Lubrication: Wet sump
Induction: Electronic injection with 1 injector per cylinder
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection
Electric: Electric
Max Power: 95 kW /129 hp @ 8500 rpm
Max Torque: 110 Nm / 11.2 kgm / 81.1 lb-ft @ 5250 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain drive, ratio 16:37
Primary Drive: 44/79
Gear Ratio: 1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27
Frame: Decomposable, front steel trestle, rear aluminium alloy casting
Front Suspension: ~A50 mm upside-down fork, with hydraulic extension, compression and spring preload adjustments
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Steel tube trestle swingarm, rear dumper with hydraulic adjustment (extension, high and low speed compression) and spring preload assembled with progressive link
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2 x 320 mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 190/50-17
Dimensions: Length: 2000 mm / 78.7 in Width: 790 mm / 31.1 in Height: 1050 mm / 41.3 in
Wheelbase: 1419 mm / 55.9 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 205 kg / 452 lbs
Wet Weight: 215 kg / 474 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Benelli Tornado 1130 (2013) appeared first on MotorcycleSpecifications.com.

Benelli 654 Sport (1980)

admin — Sun, 02 Apr 2023 16:14:04 +0000

The Benelli 654 Sport was a four stroke, transverse four cylinder, double overhead camshaft motorcycle produced in 1980. With a capacity of 603.9 cc and a compression ratio of 9.3:1, it boasted a maximum power output of 44.7 kW or 60 hp at 8700 rpm and a torque of 5.1 Nm or 5.1 kgf-m at 7000 rpm. The bike had a wet sump clutch, 5 speed transmission, and chain final drive. The fuel capacity was 12 litres or 3.2 US gallons with an average consumption of 5.57 L/100 km or 42.2 mpg. The wet weight of the motorcycle was 190.5 kg or 420 lbs. The front suspension featured tele-hydraulic forks and the rear featured swinging arm, adjustable shocks. The front brakes consisted of 2 x 265 mm discs while the rear brakes featured a single 260 mm disc. The standing 1/4 mile time was 14.1 seconds and the top speed was 185 km/h or 115 mph.

Technical specifications:

Make Model: Benelli 654 Quattro

The post Benelli 654 Sport (1980) appeared first on MotorcycleSpecifications.com.