Benelli 125 BKX Archives - MotorcycleSpecifications.com

Laverda 500 Alpino S (1978)

admin — Sun, 02 Apr 2023 20:49:14 +0000

The Laverda 500 Alpino S was a motorcycle released in 1978. It had a four-stroke parallel twin cylinder engine, with a capacity of 497 cc and air cooling. The bike had a compression ratio of 8.6:1, and a maximum power of 44 hp at 9500 rpm. It used a 6-speed transmission and a chain for the final drive. The frame was made of steel and had telescopic front forks and adjustable shocks in the rear suspension. The front brakes had 2x 260mm discs and 2 piston calipers, while the rear brake had a single 260mm disc and a 1 piston caliper. The tires were 90/90-17 in the front and 110/90-18 in the rear. It weighed 175 kg dry and 189 kg wet, with a fuel capacity of 13.5 litres. The bike had a consumption average of 48 mpg, a standing 1/4 mile time of 14.5 seconds and could reach a top speed of 105 mph.

Technical specifications:

Make Model: Laverda 500 Alpino S

Year: 1978
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder
Capacity: 497 cc / 30.2 cu-in
Bore x Stroke: 72 x 61 mm
Cooling System: Air cooled
Compression Ratio: 8.6:1
Induction: 2x 32mm Dell’Orto PHF carburetors
Ignition: Electric CDI
Starting: Electric
Max Power: 44 hp / 32.1 kW @ 9500 rpm
Max Torque: 44.7 Nm / 33 lb-ft @ 5200 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel loop
Front Suspension: Telescopic forks
Rear Suspension: Swinging forks, adjustable shocks
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 90/90-17
Rear Tyre: 110/90-18
Dry Weight: 175 kg / 385.8 lbs
Wet Weight: 189 kg / 416.7 lbs
Fuel Capacity: 13.5 Litres / 3.5 US gal
Consumption Average: 48 mpg
Standing 1/4 Mile: 14.5 sec
Top Speed: 105 mph

The post Laverda 500 Alpino S (1978) appeared first on MotorcycleSpecifications.com.

Benelli 125 BKX (1989)

admin — Wed, 29 Mar 2023 12:39:56 +0000

The Benelli 125 BKX motorcycle was produced in 1989 and features a two-stroke, single-cylinder engine with a capacity of 124 cc or 7.6 cubic inches. The engine has a bore and stroke of 56 x 50 mm, with a compression ratio of 13.5:1. The cooling system is air-cooled and fuel is provided by a Dell’Orto carburetor, while ignition is electronic and features a kick starter. The maximum power output of the bike is measured at 18 kW or 24 horsepower at 9000 rpm. Transmission is through a 5-speed gearbox, driven by a chain. Front suspension includes air-assisted telescopic forks, while the rear suspension features single shocks and adjustable dampers. Braking is provided through a single 260 mm disc in the front and a single 220 mm disc at the back. The front tire measures 2.75-21, while the rear tire is 4.10-18.

Technical specifications:

Make Model: Benelli 125 BKX

Year: 1989
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 56 x 50 mm
Compression Ratio: 13.5:1
Cooling System: Air cooled
Induction: Dell’Orto carburetor
Ignition: Electronic
Starting: Kick start
Max Power: 18 kW / 24 hp @ 9000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Air assisted telescopic forks
Rear Suspension: Single shocks, adjustable dampers
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Tyre: 2.75 -21
Rear Tyre: 4.10 -18

The post Benelli 125 BKX (1989) appeared first on MotorcycleSpecifications.com.

Benelli 125 BKX (1972)

admin — Sat, 25 Mar 2023 08:24:02 +0000

The Benelli 125 BKX motorcycle was manufactured in 1972 and had a two-stroke, single-cylinder engine with a capacity of 169.65 cc/10.3 cu in. It had a bore x stroke of 60 x 60 mm and a compression ratio of 8.0:1. The cooling system was air-cooled and it had a 22mm Dell’Orto carburetor for induction. The ignition was flywheel magneto and the battery was a 6V. The motorcycle had a kick start and a 4-speed transmission with the final drive being through a chain.

The frame was made of duplex tubular steel, with a Marzocchi telescopic fork for the front suspension and twin Marzocchi shocks for the rear suspension. The brakes on both the front and rear were drum brakes. The wheelbase was 1270mm/50in and the seat height was 812mm/32in, while the ground clearance was 235mm/9.25in. The front tire was 2.75-19, and the rear tire was 3.00-19. It had a fuel capacity of 10L/2.6US gal and could reach a top speed of 80 km/h/50 mph.

Technical specifications:

Make Model: Benelli 175 Enduro

Year: 1972
Engine: Two stroke, single cylinder
Capacity: 169.65 cc / 10.3 cu in
Bore x Stroke: 60 x 60 mm
Compression Ratio: 8.0:1
Cooling system: Air cooled
Induction: 22 mm Dell’Orto carburetor
Ignition: Flywheel Magneto
Battery: 6V
Starting: Kick start
Transmission: 4 Speed
Final Drive: Chain
Frame: Duplex tubular steel
Front Suspension: Marzocchi telescopic fork
Rear Suspension: Twin Marzocchi shocks
Front Brakes: Drum
Rear Brakes: Drum
Wheelbase: 1270 mm / 50 in
Seat Height: 812 mm / 32 in
Ground Clearance: 235 mm / 9.25 in
Front Tyre: 2.75 -19
Rear Tyre: 3.00 -19
Fuel Capacity: 10 L / 2.6 US gal
Top Speed: 80 km/h / 50 mph

The post Benelli 125 BKX (1972) appeared first on MotorcycleSpecifications.com.