Aprilia Pegaso 650ie Archives - MotorcycleSpecifications.com

Aprilia Pegaso 650ie (2001-02)

admin — Sun, 02 Apr 2023 01:14:12 +0000

The Aprilia Pegaso 650ie, produced from 2001-02, has a four stroke, single-cylinder, DOHC 5 valve engine with a capacity of 652cc/39.8 cu in. It has a compression ratio of 9.1:1 and is liquid-cooled, with an induction of two ~A32mm Mikuni BST33 carburettors. The motorcycle is electrically started and can generate a maximum power output of 36.4 kW/50 hp @ 7000 rpm and 59 Nm/6.02 kgf-m/43.5 lb-ft of torque at 6500 rpm. The transmission has five speeds and a chain drive for the final drive. It has ~A45mm upside-down forks that are preload adjustable Marzocci, with a front wheel travel of 175mm/6.9in, while the rear wheel is supported by varying section high strength steel swing-arm with Aprilia Progressive System rising rate linkage. The front and rear brakes are a single A300 mm disc and A220 mm disc, respectively, with a 2 piston caliper and 1 piston caliper. The dimensions of the bike are 2159 mm/85.0 in length, 810 mm/31.9 in width, a wheelbase of 1478 mm/58.2 in, and a seat height of 810 mm/31.9 in. The front tyre is 100/90-19 and the rear tyre is 130/80-17.

Technical specifications:

Make Model: Aprilia Pegaso 650ie

Year: 2001 – 02
Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Bore x Stroke: 100 x 83 mm
Compression Ratio: 9.1:1
Cooling System: Liquid cooled
Induction: 2 x ~A32 mm Mikuni BST33
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 7000 rpm
Max Torque: 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: ~A45 mm Upside down forks preload adjustable, Marzocci
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage
Front Brakes: Single ~A300 mm disc, 2 piston caliper
Rear Brakes: Single ~A220 mm disc, 1 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 130/80-17
Dimensions: Length: 2159 mm / 85.0 in Width: 810 mm / 31.9 in
Wheelbase: 1478 mm / 58.2 in
Seat Height: 810 mm / 31.9 in

The post Aprilia Pegaso 650ie (2001-02) appeared first on MotorcycleSpecifications.com.

Indian Chief Vintage (2012-13)

admin — Sat, 01 Apr 2023 10:41:11 +0000

The Indian Chief Vintage motorcycle, produced from 2012 to 2013, had a four-stroke V-twin engine with a 1720cc capacity and a 9.0:1 compression ratio. It used closed loop sequential port fuel injection and had digital CDI ignition. The transmission was 5-speed, and the final drive was a belt with gear ratios varying from 10.441:1 in first gear to 2.771:1 in sixth gear. The frame was made of high-tensile steel with a monoshock, and the front suspension was a 41mm diameter with 108mm wheel travel. The rear suspension was a single shock with 73mm wheel travel. The front brakes were a single 292mm disc with two piston calipers, and the rear brakes were a single 292mm disc with one piston caliper. The tires were 130/90-16 in the front and 150/90-16 in the rear. The motorcycle had a 34-degree rake and a 150mm/5.9in trail. It measured 2552.7mm/100.5in in length, 1028.7mm/40.5in in width, and 1282.7mm/50.5in in height, with a wheelbase of 1737.3mm/68.4in. The seat height was 692mm/27.2in, and the dry weight was 339kb/748lb. The fuel capacity was 20.8 liters/5.5 gallons.

Technical specifications:

Make Model: Indian Dark Horse

Year: 2012 – 13
Engine: Four stroke, V-twin, 2 valve per cylinder.
Capacity: 1720 cc / 105 cu-in
Bore x Stroke: 3.966 x 4.25 in.
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: Closed loop sequential port fuel injection
Ignition: Digital CDI
Starting: -Electric
Max Toque: 100 lb-ft / 135.5 Nm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.441:1 2nd 7.090:1 3rd 5.172:1 4th 3.984:1 5th 3.193:1 6th 2.771:1
Frame: High tensile steel, monoshock
Front Suspension: 41 mm diameter; 108 mm wheel travel
Rear Suspension: Single shock, 73mm wheel travel.
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 292mm disc 1 piston calipers
Front Tyre: 130/90-16
Rear Tyre: 150/90-16
Rake: 34 degrees
Trail: 150 mm / 5.9 in
Dimensions: Length 2552.7 mm / 100.5 in Width 1028.7 mm / 40.5 in Height 1282.7 mm / 50.5 in
Wheelbase: 1737.3 mm / 68.4 in
Seat Height: 692 mm / 27.2 in
Seat Height: 680.8 mm / 27.2 in
Dry Weight: 339 kb / 748 lb
Fuel Capacity: 20.8 Litres / 5.5 Gal

The post Indian Chief Vintage (2012-13) appeared first on MotorcycleSpecifications.com.

Aprilia Pegaso 650ie (2012)

admin — Sat, 01 Apr 2023 01:10:58 +0000

The Aprilia Pegaso 650ie is a motorcycle from 2012 that has a liquid-cooled, four-stroke, single-cylinder, SOHC engine with a capacity of 659 cc. It has a bore of 100 mm and stroke of 84 mm, with a compression ratio of 10:1. The bike uses electronic fuel injection with a 44 mm throttle body, and has a digital ignition and electric starting. The maximum power output of the Pegaso 650ie is 36.4 kW or 48 hp at 6250 rpm, while its maximum torque is 61.3 Nm at 5200 rpm. The transmission is a 5-speed manual with a chain final drive. The frame is made of steel with an open cradle and single spar, while the suspension features a 45 mm Marzocchi telescopic fork in the front and a rear swingarm with the Aprilia Progressive System (APS) and Sachs hydraulic monoshock with adjustable rebound and preload. The front brake is a single 320 mm disc with a 2-piston caliper, while the rear brake is a single 240 mm disc with a 1-piston caliper. The bike weighs approximately 182 kg (401 lbs) and has a front wheel travel of 140 mm (5.1 in) and a rear wheel travel of 130 mm (6.7 in). The Pegaso 650ie complies with Euro 3 emission standards.

Technical specifications:

Make Model: Aprilia Pegaso 650ie

Year: 2012
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 659 cc / 40.2 in
Bore x Stroke: 100 x 84 mm
Compression Ratio: 10.0:1
Cooling System: Liquid cooled
Emission Standard: Euro 3
Induction: Electronic fuel injection. ~A44mm throttle body
Ignition: Digital
Starting: Electric
Max Power: 36.4 kW / 48 hp @ 6250 rpm
Max Torque: 61.3 Nm / 6.25 kgf-m / 45.2 lb-ft @ 5200 rpm
Clutch: Multi-plate in oil bath
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, open cradle, single spar frame
Front Suspension: ~A45 mm Marzocchi telescopic fork
Front Wheel Travel: 140 mm / 5.1 in
Rear Suspension: High strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. Sachs hydraulic monoshock with adjustable rebound and preload.
Rear Wheel Travel: 130 mm / 6.7 in
Front Brakes: Single ~A320 mm disc, 2 piston caliper
Rear Brakes: Single ~A240 mm disc, 1 piston caliper

The post Aprilia Pegaso 650ie (2012) appeared first on MotorcycleSpecifications.com.

Aprilia Pegaso 650ie (2003-06)

admin — Tue, 28 Mar 2023 10:06:02 +0000

The Aprilia Pegaso 650ie motorcycle was produced from 2003 to 2006 and features a four-stroke, single-cylinder, DOHC, 652 cc engine with a maximum power of 36.4 kW / 50 hp at 7000 rpm and maximum torque of 59 Nm / 6.02 kgf-m / 43.5 lb-ft at 6500 rpm. The engine has a compression ratio of 9.1:1 and is liquid-cooled with two Mikuni BST33 carburetors. The motorcycle has an electric starter and a 5-speed transmission with a final drive chain. The front suspension has upside-down forks that are preload adjustable with a Marzocci and offers 175mm / 6.9 in of wheel travel. The rear suspension has a varying section high-strength steel swing-arm with an Aprilia Progressive System (APS) rising rate linkage. The motorcycle also features single ~A300 mm disc brakes in the front and single ~A220 mm disc brakes in the rear. The front wheel tyre size is 100/90-19, and the rear is 130/80-17. The dimensions of the motorcycle are a length of 2159 mm / 85.0 in, width of 810 mm / 31.9 in, a wheelbase of 1478mm / 58.2 in, and a seat height of 810 mm / 31.9 in.

Technical specifications:

Make Model: Aprilia Pegaso 650ie

Year: 2003 – 06
Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Bore x Stroke: 100 x 83 mm
Compression Ratio: 9.1:1
Cooling System: Liquid cooled
Induction: 2 x ~A32 mm Mikuni BST33
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 7000 rpm
Max Torque: 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: ~A45 mm Upside down forks preload adjustable, Marzocci
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage
Front Brakes: Single ~A300 mm disc, 2 piston caliper
Rear Brakes: Single ~A220 mm disc, 1 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 130/80-17
Dimensions: Length: 2159 mm / 85.0 in Width: 810 mm / 31.9 in
Wheelbase: 1478 mm / 58.2 in
Seat Height: 810 mm / 31.9 in

The post Aprilia Pegaso 650ie (2003-06) appeared first on MotorcycleSpecifications.com.