Alfer Archives - MotorcycleSpecifications.com

Alfer VR250 (2001)

admin — Fri, 31 Mar 2023 11:23:04 +0000

The Alfer VR 250 Enduro is a motorcycle that was produced in 2001. It is equipped with a two stroke, single cylinder engine with a capacity of 249 cc. The engine has a bore and stroke of 67.5 x 69.8 mm and employs a liquid cooling system. The Alfer VR 250 Enduro has a single high level exhaust and a carburetor induction system. The motorcycle is started by an electric ignition system and has a maximum power output of 39.4 kW or 54 hp. The clutch system is wet and cable operated while the transmission is six-speed, with a final drive through a chain. The Alfer VR 250 Enduro has a steel, single cradle frame and Telescopic fork front suspension and Mono shock rear suspension. The motorcycle has a single disc brake with a diameter of 260 mm at the front and a single disc brake with a diameter of 220 mm at the rear. The wheels are alloy with laced spokes and the front tyre size is 90/90-21 while the rear tyre size is 140/90-18. The wheelbase of the Alfer VR 250 Enduro is 1515 mm or 59.7 in and it has a seat height of 950 mm or 37.4 in. The wet weight of the motorcycle is 104 kg or 229 lbs, while the fuel capacity is 9.5 L or 2.5 US gal. The acceleration from 0-100 km/h takes 3.6 seconds and 0-60 mph takes 3.4 seconds.

Technical specifications:

Make Model: Alfer VR 250 Enduro

Year: 2001
Engine: Two stroke, single cylinder
Capacity: 249 cc / 15.2 cu in
Bore x Stroke: 67.5 x 69.8 mm
Cooling System: Liquid cooled
Exhaust: 1-into-1, high level
Induction: Carburetor
Starting: Electric
Max Power: 39.4 kW / 54 hp
Clutch: Wet, cable operated
Transmission: 6-Speed
Final Drive: Chain
Frame: Steel, single cradle frame
Front Suspension: Telescopic fork
Rear Suspension: Mono shock
Front Brakes: Single disc, 260 mm
Rear Brakes: Single disc, 220 mm
Wheels: Alloy, laced spokes
Front Tyre: 90/90-21
Rear Tyre: 140/90-18
Wheelbase: 1515 mm / 59.7 in
Seat Height: 950 mm / 37.4 in
Wet Weight: 104 kg / 229 lbs
Fuel Capacity: 9.5 L / 2.5 US gal
Acceleration: 0-100 km/h: 3.6 sec
Acceleration: 0-60 mph: 3.4 sec

The post Alfer VR250 (2001) appeared first on MotorcycleSpecifications.com.

Alfer VR 2000 Supermotard (2003)

admin — Mon, 27 Mar 2023 23:14:02 +0000

The Alfer VR 2000 Supermotard motorcycle was manufactured in 2003 and is equipped with a two-stroke, single-cylinder engine with a capacity of 249 cc. It has a liquid-cooled cooling system, low-boy Fresco exhaust with an aluminum silencer, and Mikuni TM 38 induction. The ignition is SEM 12V, 160W AV and the electric starting system is fitted in the motorcycle. The bike has six-speed transmission with a chain final drive. The Alfer VR 2000 Supermotard has a hardened CrMo-e steel frame with a bolt-on aluminum rear section. It has Marzocchi Magnum 50 front suspension with 290 mm/11.4 in wheel travel and Ohlins linkless position-sensitive damping single shock, external compression, and rebound damping adjustment at the rear with 300 mm/11.8 mm wheel travel. The bike uses light alloy, anodized, laced spokes wheels with a wheelbase of 1480 mm/58.3 in, and 350 mm/13.8 in of ground clearance. The seat height is at 905 mm/35.6 in high, and it weighs around 103 kg/227 kg with 9.5 Litres/2.5 US gal of fuel capacity. The brakes are single 320mm discs with four-piston calipers in the front while the rear has single 220mm discs with one-piston caliper. The tire sizes are 110/70-17 in the front and 150/70-17 in the rear.

Technical specifications:

Make Model: Alfer VR 2000 Supermotard

Year: 2003
Engine: Two stroke, single cylinder
Capacity: 249 cc / 15.2 cu in
Bore x Stroke: 67.5 x 69.8 mm
Cooling System: Liquid cooled
Exhaust: Low-boy Fresco, aluminium silencer
Induction: Mikuni TM 38
Ignition: SEM 12V, 160W AV
Starting: Electric
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 13/3/ 2nd 15/29, 3rd 17/27, 4th 19/25, 5th 21/24, 6th 22/21
Frame: Hardened CrMo-e steel. Bolt-on aluminium rear section.
Front Suspension: Marzocchi Magnum 50
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Ohlins linkless position-sensitive damping single shock, external compression and rebound damping adjustment
Rear Wheel Travel: 300 mm / 11.8 mm
Front Brakes: Single 320 mm disc, 4-piston calipers
Rear Brakes: Single 220 mm disc, 1-piston caliper
Wheels: Light alloy, anodized, laced spokes
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Wheelbase: 1480 mm / 58.3 in
Ground Clearance: 350 mm / 13.8 in
Seat Height: 905 mm / 35.6 in
Dry-Weight: 103 kg / 227 kg
Fuel Capacity: 9.5 Litres / 2.5 US gal

The post Alfer VR 2000 Supermotard (2003) appeared first on MotorcycleSpecifications.com.

Alfer TX300 (1988-92)

admin — Fri, 24 Mar 2023 18:18:00 +0000

The Alfer TX 300 motorcycle was produced between 1988 and 1992. It has a single cylinder, 2-stroke engine with a capacity of 258cc, a compression ratio of 10.5:1 and uses a Del ‘Orto PHBH 26 ZS carburetor for induction. The motorcycle also features electronic Motoplat ignition and a kick-start. It has a 6-speed transmission and final drive is through chain. The front suspension uses Marzocchi inverted shocks while the rear features a Marzocchi monoshock PRS2, giving it a rear wheel travel of 180mm / 7.1 in. The wheels are made of steel/alloy with wire spokes, and the dimensions of the motorcycle are 2020mm / 79.5 in in length, 870 mm / 34.3 in in width and 1140 mm / 44.9 in in height, with a wheelbase of 1330 mm / 52.4 in. The motorcycle has a ground clearance of 370 mm / 14.6 in and a dry weight of 86 kg / 190 lbs. It has a very small fuel capacity of 4 L / 1.1 US gal, and a seat height of 750 mm / 29.5 in.

Technical specifications:

Make Model: Alfer TX 300

Year: 1988 – 92
Engine: Single cylinder, 2-stroke
Capacity: 258 cc / 15.7 cu in
Bore x Stroke: 74 x 60 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Exhaust: 1-into-1
Induction: Del ‘Orto PHBH 26 ZS carburetor
Ignition: Electronic Motoplat
Starting: Kick
Transmission: 6-Speed
Final Drive: Chain
Front Suspension: Marzocchi inverted shocks, 35 mm
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Marzocchi monoshock PRS2
Rear Wheel Travel: 180 mm / 7.1 in
Wheels: Steel/alloy with wire spokes
Dimensions: Length: 2020mm / 79.5 in Width: 870 mm / 34.3 in Height: 1140 mm / 44.9 in
Wheelbase: 1330 mm / 52.4 in
Ground Clearance: 370 mm / 14.6 in
Seat Height: 750 mm / 29.5 in
Dry Weight: 86 kg / 190 lbs
Fuel Capacity: 4 L / 1.1 US gal

The post Alfer TX300 (1988-92) appeared first on MotorcycleSpecifications.com.

Alfer VR2000 Enduro (2003)

admin — Fri, 24 Mar 2023 13:00:04 +0000

The Alfer VR2000 Enduro is a 2003 motorcycle with a two-stroke, single cylinder engine and a capacity of 249 cc. It uses a low-boy Fresco exhaust with an aluminum silencer and a Mikuni TM 38 induction system. The ignition system is a SEM 12V, 160W AV and it has an electric starter. The motorcycle has a six-speed transmission and a chain final drive. It is built with a hardened CrMo-e steel frame and a bolt-on aluminum rear section. The front suspension is a Marzocchi Magnum with 290 mm of wheel travel, while the rear suspension is an Ohlins linkless position-sensitive damping single shock with external compression and rebound damping adjustment and 300 mm of wheel travel. The front and rear brakes are single disc with 2-piston and 1-piston calipers, respectively. The wheels are light alloy, anodized, with laced spokes, with a 1.60×21 front rim and a 2.15×18 rear rim. The front and rear tires are 90/90-21 and 140/80-18, respectively. It has a wheelbase of 1480 mm, ground clearance of 350 mm, seat height of 920 mm, and a dry weight of 103 kg. The fuel capacity is 9.5 liters or 2.5 US gall.

Technical specifications:

Make Model: Alfer VR 2000 Enduro

Year: 2003
Engine: Two stroke, single cylinder
Capacity: 249 cc / 15.2 cu in
Bore x Stroke: 67.5 x 69.8 mm
Cooling System: Liquid cooled
Exhaust: Low-boy Fresco, aluminium silencer
Induction: Mikuni TM 38
Ignition: SEM 12V, 160W AV
Starting: Electric
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 13/3/ 2nd 15/29, 3rd 17/27, 4th 19/25, 5th 21/24, 6th 22/21
Frame: Hardened CrMo-e steel. Bolt-on aluminium rear section.
Front Suspension: Marzocchi Magnum
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Ohlins linkless position-sensitive damping single shock, external compression and rebound damping adjustment
Rear Wheel Travel: 300 mm / 11.8 mm
Front Brakes: Single 260 mm disc, 2-piston calipers
Rear Brakes: Single 220 mm disc, 1-piston caliper
Wheels: Light alloy, anodized, laced spokes
Front Rim: 1.60 x 21
Rear Rim: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Wheelbase: 1480 mm / 58.3 in
Ground Clearance: 350 mm / 13.8 in
Seat Height: 920 mm / 36.2 in
Dry-Weight: 103 kg / 227 kg
Fuel Capacity: 9.5 Litres / 2.5 US gal

The post Alfer VR2000 Enduro (2003) appeared first on MotorcycleSpecifications.com.