2010-11 Archives - MotorcycleSpecifications.com

Kawasaki Concours 14 (2010-11)

admin — Fri, 07 Apr 2023 02:55:06 +0000

The Kawasaki GTR 1400 Concours Grand Tour Edition was produced from 2010-11 and is equipped with a four-stroke, transverse four-cylinder engine with a capacity of 1352cc. It has a liquid cooling system, fuel injection, and forced lubrication. The bike delivers a maximum power of 155 horsepower at 8800 rpm and a maximum torque of 136Nm at 6200 rpm. The transmission is a six-speed manual with shaft final drive. The monocoque pressed aluminum frame supports a bottom link unit-trek rear suspension and a 43mm inverted fork with adjustable rebound damping and spring preload. The bike has dual 310mm disc brakes in the front, a single 270mm disc brake in the rear, and a 120/70 ZR17 front tire and 190/50 ZR17 rear tire. Its dimensions are 2230mm in length, 790mm in width, and 1345mm in height, with a wheelbase of 1520mm and a seat height of 815mm. The bike weighs 300kg/670.3lbs, or 304kg/679.1lbs with ABS, and has a fuel capacity of 22 liters (5.8 US gal). The average consumption of this bike is 15.3 km/lit, and it has a standing quarter-mile time of 11.2 seconds at 202.1 km/h or 125.5 mph. Its top speed is 253.6 km/h or 157.5 mph.

Technical specifications:

Make Model: Kawasaki GTR 1400 Concours Grand Tour Edition

Year: 2010 – 11
Engine: Four stroke, transverse four cylinders, DOHC, 4 valves per cylinder
Capacity: 1352 cc / 82.5 cu-in
Bore x Stroke: 84 x 61 mm
Cooling: Liquid cooled
Compression Ratio: 10.7;1
Induction: Fuel injection: ~A,40 mm x 4
Lubrication: Forced lubrication, wet sump
Ignition: Digital
Starting: Electric
Max Power: 114 kW / 155 hp @ 8800 rpm
Max Power Ram Air: 118.4 kW /161 hp @ 8800 rpm
Max Torque: 136Nm / 102.0 lb-ft / 13.9 [email protected] 6200 rpm
Clutch: Wet multi-disc manual
Transmission: 6 Speed
Final Drive: Shaft
Gear Ratio: 1st 3.333 (50/15) 2nd 2.415 (41/17) 3rd 1.900 (38/20) 4th 1.545 (34/22) 5th 1.292 (31/24) 6th 1.074 (29/27)
Frame: Monocoque pressed aluminum
Front Suspension: 43 mm inverted fork with adjustable rebound damping and spring preload
Front Wheel Travel: 113 mm / 4.4 in
Rear Suspension: Bottom link Unit-Trek with gas charged shock, Tetra lever rebound damping
Rear Wheel Travel: 136 mm / 5.4 in
Front Brakes: 2X 310mm discs 4 piston calipers
Rear Brakes: Single 270mm disc 2 piston caliper
Front Tyre: 120/70- ZR17
Rear Tyre: 190/50 -ZR17
Steering Angle, Left / Right: 31 degrees / 31 degrees
Rake: 26.1 degrees
Trail: 112 mm / 4.4 in
Dimensions: Length 2230 mm / 89.4 in. Width 790 mm / 31.4 in Height 1345 mm / 50.8 in. – 1465 mm / 31.4 in. (High position)
Wheelbase: 1520 mm / 59.8 in
Ground Clearance: 125 mm / 4.9 in
Seat Height: 815 mm / 32.1 in.
Wet Weight: 300 kg / 670.3 lbs – ABS 304 kg / 679.1 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Consumption Average: 15.3 km/lit
Standing 1/4 Mile: 11.2 sec / 202.1.km/h / 125.5 mph
Standing 1000m: 20.8 sec / 238.1 km/h / 148 mph
Top Speed: 253.6 km/h / 157.5 mph

The post Kawasaki Concours 14 (2010-11) appeared first on MotorcycleSpecifications.com.

Harley Davidson FXDWG Dyna Wide Glide (2010-11)

admin — Fri, 07 Apr 2023 01:08:04 +0000

The Harley Davidson FXDWG Dyna Wide Glide motorcycle was produced in the years 2010-2011, equipped with a 1584cc V-Twin Twin Cam 96 engine with hydraulic lifters and two valves per cylinder. The engine uses Electronic Sequential Port Fuel Injection to help push out a max torque of 124.7 Nm at 3000 rpm. The motorcycle features a 6-speed transmission and a mild steel, tubular frame with dual-rate springs on a 49mm front suspension and coil over shock on the rear suspension. The front and rear brakes both have a 4-piston caliper and the bike has an 80/90-21 front tire and a 180/60B17 rear tire. The bike weighs 647 lbs dry and has a fuel capacity of 4.7 gallons. Overall, the Harley Davidson FXDWG Dyna Wide Glide is a powerful and stylish motorcycle with impressive engine specs and suspension features.

Technical specifications:

Make Model: Harley Davidson FXDWG Dyna Wide Glide

Year: 2010 – 11
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Rear Suspension: Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded, Coil over shock ,
Front Brakes: Single 300mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: 80/90-21
Rear Tyre: 180/60B17
Rake: 34 degrees
Trail: 132 mm / 5.2 in.
Dimensions: Length 2387.6 mm / 94.0 in Width 944.8 mm / 37.2 in Height 1214.1 mm / 47.8 in
Wheelbase: 1715 mm / 67.5 in
Seat Height: Laden 648 mm / 25.5 in. Unladen .678 mm / 26.7 in
Gross Vehicle Weight Rating: 492.2 kg / 1085 lbs
Dry Weight: 293 kg / 647 lbs
Wet Weight: 310 kg / 683.4 lbs
Fuel Capacity: 17.8 Litres / 4.7 US gal

The post Harley Davidson FXDWG Dyna Wide Glide (2010-11) appeared first on MotorcycleSpecifications.com.

Aprilia SR Max 300 (2010-11)

admin — Thu, 06 Apr 2023 23:23:00 +0000

The Aprilia SR Max 300 motorcycle was produced in 2010-11 and has a four-stroke, single-cylinder, SOHC, 4-valve engine with a capacity of 278cc. It has a liquid cooling system and operates on electronic injection. The bike has an electric starter and a centrifugal dry clutch, along with an automatic (CVT) transmission with torque server. The final drive is through a belt. The motorcycle has front and rear suspension consisting of hydraulic telescopic forks and double hydraulic shock absorbers with preload adjustment, respectively. Brakes are single discs, with the front at ~260mm and the rear at ~240mm. The bike features front and rear tires with sizes of 120/70-15 and 140/60-14, respectively. The seat height is 815mm/32.1in, and the dimensions are 2110mm/83.1in (length), 780mm/30.7in (width), and 1515mm/59.6in (wheelbase). The fuel capacity is 15.5 liters/4.1 US gal, and the fuel reserve is 2.8L/0.7 US gal. The motorcycle has an average fuel consumption of 4L/100km or 25 km/l or 59 US mpg. It has a max power of 16.4 kW/22 hp at 7500 rpm and max torque of 23 Nm/2.3 kgf-m/17.0 lb-ft at 6000 rpm. According to Motorcycle News and Cars Guide, the Aprilia SR Max 300 has received positive reviews.

Technical specifications:

Make Model: Aprilia SR Max 300

Year: 2010-11
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 278 cc / 17.0 cu in
Bore x Stroke: 75 x 63 mm
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: Electronic injection
Starting: Electric
Clutch: Double cradle trellis in high strength steel tubing
Max Power: 16.4 kW / 22 hp @ 7500 rpm
Max Torque: 23 Nm / 2.3 kgf-m / 17.0 lb-ft @ 6000 rpm
Clutch: Centrifugal dry clutch
Transmission: Automatic (CVT) with torque server
Final Drive: Belt
Front Suspension: ~A35 mm Hydraulic telescopic fork
Rear Suspension: Double hydraulic shock absorber with preload adjustment
Front Brakes: Single ~A260 mm disc
Rear Brakes: Single ~A240 mm disc
Front Tyre: 120/70-15
Rear Tyre: 140/60-14
Seat Height: 815 mm / 32.1 in
Dimensions: Length: 2110 mm / 83.1 in Width: 780 mm / 30.7 in
Wheelbase: 1515 mm / 59.6 in
Fuel Capacity: 15.5 liters / 4.1 US gal
Fuel Reserve: 2.8 L / 0.7 US gal
Average Fuel Consumption: 4 L/100 km / 25 km/l / 59 US mpg
Reviews: Motorcycle News / Cars Guide

The post Aprilia SR Max 300 (2010-11) appeared first on MotorcycleSpecifications.com.

Suzuki AN 650 Burgman (2010-11)

admin — Thu, 06 Apr 2023 23:20:59 +0000

The Suzuki AN 650 Burgman model was manufactured in 2010-11, equipped with a liquid-cooled, four-stroke twin-cylinder engine, with an electronic fuel injection system and a compression ratio of 11.2:1. It generates a maximum power of 40 kW at 7000 rpm and a maximum torque of 62 Nm at 5000 rpm. The bike features an electronically-controlled CVT automatic and manual shift transmission with a V-belt final drive. Its tubular steel frame supports telescopic front fork with 41mm inner tubes, and a swingarm-style rear suspension with twin preload-adjustable shock absorbers and a separate aluminum swingarm, offering a front wheel travel of 105 mm. The braking system includes 2 x 260 mm discs with two-piston calipers and ABS on the front, and a single 250 mm disc with two-piston caliper and ABS on the rear. The bike also comes with tubeless tires, 120/70 R15M/C 56H on the front, and 160/60 R14M/C 65H on the rear, and has a seat height of 750 mm and a ground clearance of 130 mm. Its dry weight is 238 kg, and the wet weight is 277 kg, with a fuel capacity of 15 liters, offering a top speed of 177 km/h, and a 1/4-mile acceleration time of 16 seconds. Its one-wheel drive earns mixed reviews.

Technical specifications:

Make Model: Suzuki AN 650 Burgman

Year: 2010 – 11
Engine: Four stroke, twin cylinder, DOHC, 4 valves per cylinder.
Capacity: 638 cc / 38.9 cu in
Bore x Stroke: 75.5 x 71.3 mm
Compression Ratio: 11.2:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: Electronic fuel injection
Ignition: Digital electronic
Starting: Electric
Max Power: 40 kW / 55 hp @ 7000 rpm
Max Torque: 62 Nm / 6.3 kgf-m / 45.7 lb-ft @ 5000 rpm
Transmission: Electronically-controlled, CVT- automatic and manual shift
Final Drive: V-belt
Frame: Tubular steel
Front Suspension: Telescopic front fork with 41mm inner tubes, coil spring, oil damped
Rear Suspension: Swingarm-style, twin preload-adjustable shock absorbers and a separate aluminum swingarm, coil spring, oil damped
Front Wheel Travel: 105 mm / 4.1″
Front Brakes: 2 x 260 mm discs, 2 piston calipers, ABS
Rear Brakes: Single 250 mm disc, 2 piston caliper, ABS
Front Tyre: 120/70 R15M/C 56H, tubeless
Rear Tyre: 160/60 R14M/C 65H, tubeless
Dimensions: Length: 2260 mm / 89.0″ Width: 810 mm / 31.9″
Wheelbase: 1595 mm / 62.8″
Seat Height: 750 mm / 29.5″
Ground Clearance: 130 mm / 5.1″
Dry Weight: 238 kg / 525 lbs
Wet Weight: 277 kg / 611 lbs
Fuel Capacity: 15 Litres / 4.0 US gal
Top Speed: 177 km/h / 110 mph
1/4 Mile Acceleration: 16 sec
Review: One Wheel Drive

The post Suzuki AN 650 Burgman (2010-11) appeared first on MotorcycleSpecifications.com.

Suzuki DR-Z 400S (2010-11)

admin — Thu, 06 Apr 2023 20:59:08 +0000

The Suzuki DR-Z 400S motorcycle was produced between 2010 and 2011. It has a four stroke, single cylinder, DOHC, 4 valve engine with a capacity of 398 cc / 24.3 cu-in and a compression ratio of 11.3:1. The bike is liquid cooled and has a Mikuni BSR36 carburetor for induction. The ignition is digital CDI and starting is electric. The maximum power is 29.2 kW / 39.7 hp at 8500 rpm and the maximum torque is 39 Nm / 3.98 kg-m / 28.8 lb-ft at 6600 rpm. The clutch is wet, multiple discs, cable operated and the transmission has 5 speeds. The front suspension is telescopic, 49 mm, oil-damped, with 11-way compression damping and adjustable spring preload, while the rear suspension is link-type, fully adjustable spring preload, and has 26-way compression damping. The front and rear brakes are single disc with 2 and 1 piston calipers, respectively. The bike has a fuel capacity of 10 liters / 2.6 US gal / 2.2 Imp gal, and a fuel consumption average of 4.5 L/100 km / 21.9 km/l / 51.1 US mpg / 61.9 Imp mpg. The standing 1/4 mile time is 13.9 seconds and the top speed is 152 km/h / 94 mph. The bike has a length of 2310 mm / 90.9 in, a width of 875 mm / 34.4 in, a height of 1230 mm / 48.4 in, a wheelbase of 1485 mm / 58.5 in, a seat height of 935 mm / 36.8 in, a ground clearance of 300 mm / 11.8 in, and a dry weight of 132 kg / 291 lbs.

Technical specifications:

Make Model: Suzuki DR-Z 400S

Year: 2010 – 11
Engine: Four stroke, single cylinder, DOHC, 4 valve
Capacity: 398 cc / 24.3 cu-in
Bore x Stroke: 90 x 62.6 mm.
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Induction: Mikuni BSR36 carburetor
Lubrication: Dry sump
Ignition: Digital CDI
Starting: Electric
Max Power: 29.2 kW / 39.7 hp @ 8500 rpm
Max Torque: 39 Nm / 3.98 kg-m / 28.8 lb-ft @ 6600 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain, #520
Front Suspension: Telescopic, 49 mm, oil-damped, 11-way compression damping, adjustable spring preload
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Link-type, fully adjustable spring preload, 26-way compression damping
Rear Wheel Travel: 295 mm / 11.6 in
Front Brakes: Single 250mm disc, 2 piston caliper
Rear Brakes: Single 220mm disc, 1 piston caliper
Front Tyre: 80/100-21
Rear Tyre: 120/90-18
Dimensions: Length 2310 mm / 90.9 in Width 875 mm / 34.4 in. Height 1230 mm / 48.4 in
Wheelbase: 1485 mm / 58.5 in
Seat Height: 935 mm / 36.8 in
Ground Clearance: 300 mm / 11.8 in
Dry Weight: 132 kg / 291 lbs
Fuel Capacity: 10 Litres / 2.6 US gal / 2.2 Imp gal
Consumption Average: 4.5 L/100 km / 21.9 km/l / 51.1 US mpg / 61.9 Imp mpg
Standing 1/4 Mile: 13.9 sec
Top Speed: 152 km/h / 94 mph

The post Suzuki DR-Z 400S (2010-11) appeared first on MotorcycleSpecifications.com.

Yamaha XT 250 (2010-11)

admin — Thu, 06 Apr 2023 16:31:00 +0000

The Yamaha XT 250 Serow is a motorcycle model from 2010 to 2011 featuring a four-stroke, single cylinder engine with a capacity of 249 cc. It has a bore x stroke of 74.0 x 58.0mm and is air cooled with a compression ratio of 9.5;1. The bike has a wet sump lubrication system with a 33mm Vac induction and TCI ignition. Its maximum power output is 18 hp @ 7500 rpm and maximum torque of 19 Nm / 14.0 lb-ft @ 6500 rpm. The clutch is operated by multiple discs and cable, while the transmission has six speeds with a final drive chain. The front suspension features 35mm telescopic forks with 216 mm / 8.9 in of wheel travel, while the rear suspension offers Monocross, Swingarm rebound-adjustable single shock, with 180 mm / 7.1 in of wheel travel. It has single 245 mm disc front brakes and single 203 mm disc rear brakes, with 80/70-21 and 120/80-18 front and rear tires, respectively. The bike dimensions are length 2070 mm / 81.5 in, width 805 mm / 31.7 in, and a wheelbase of 1359 mm / 53.5 in. The seat height is 810 mm / 31.9 in, with a dry weight of 123 kg / 271 lbs and a fuel capacity of 9.8 Litres / 2.6 US gal.

Technical specifications:

Make Model: Yamaha XT 250 Serow

Year: 2010 – 11
Engine: Four stroke, single cylinder. SOHC, 2 valve
Capacity: 249 cc / 15.2 cu-in
Bore x Stroke: 74.0 x 58.0mm
Cooling System: Air cooled
Compression Ratio: 9.5;1
Lubrication: Wet sump
Induction: 33mm Vac
Ignition: TCI
Starting: Electric
Max Power: 18 hp / 13.1 kW @ 7500 rpm
Max Torque: 19 Nm / 14.0 lb-fts @ 6500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Telescopic forks
Front Wheel Travel: 216 mm / 8.9 in
Rear Suspension: Monocross, Swingarm rebound-adjustable single shock
Rear Wheel Travel: 180 mm / 7.1 in
Front Brakes: Single 245mm disc
Rear Brakes: Single 203mm disc
Front Tyre: 80/70-21
Rear Tyre: 120/80-18
Rake: 26.0 degrees
Dimensions: Length 2070 mm / 81.5 in Width 805 mm / 31.7 in
Wheelbase: 1359 mm / 53.5 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 123 kg / 271 lbs
Fuel Capacity: 9.8 Litres / 2.6 US gal

The post Yamaha XT 250 (2010-11) appeared first on MotorcycleSpecifications.com.

Suzuki Boulevard M50 (2010-11)

admin — Thu, 06 Apr 2023 03:05:59 +0000

The Suzuki Boulevard M50 is a motorcycle with a 805cc, four stroke, 45 degree V-twin engine producing a max power of 39 kW and max torque of 69 Nm. It has a 5-speed transmission, shaft final drive, and features an inverted, telescopic, coil spring, oil damped front suspension and a link-type, oil damped, 7-way adjustable spring preload rear suspension. The bike has a single 300mm disc, 2 piston caliper front brakes and a drum rear brake, with a front tyre size of 130/90-16 and a rear tyre size of 170/80-15. The bike weighs 269 kg, has a fuel capacity of 15.5 litres, and measures 2395mm x 890mm x 1105mm (L x W x H), with a wheelbase of 1655mm and seat height of 700mm.

Technical specifications:

Make Model: Suzuki Boulevard M50

Year: 2010-11
Engine: Four stroke, 45 degrees V-Twin
Capacity: 805cc / 49.1 cu-in
Bore x Stroke: 83 x 74.4 mm
Cooling System: Liquid cooled
Compression Ratio: 9.4:1
Lubrication: Wet sump
Induction: Mikuni BDSR34
Ignition: Electronic
Starting: Electric
Max Power: 39 kW / 52 hp / @ 6000 rpm
Max Torque: 69 Nm / 7.0 kgf-m / 51 lb-ft @ 3200 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Inverted, telescopic, coil spring, oil damped
Rear Suspension: Link-type, oil damped, 7-way adjustable spring preload
Front Brakes: Single 300 mm disc, 2 piston caliper
Rear Brakes: Drum
Front Tyre: 130/90-16
Rear Tyre: 170/80-15
Dimensions: Length 2395 mm / 94.3 in Width 890 mm / 35.0 in Height 1105 mm / 43.5 in
Wheelbase: 1655 mm / 65.2 in
Seat Height: 700 mm / 27.6 in.
Wet Weight: 269 kg / 593 lbs
Ground Clearance: 140 mm / 5.5 in
Fuel Capacity: 15.5 Litres / 4.1 / 3.4 US/Imp gal

The post Suzuki Boulevard M50 (2010-11) appeared first on MotorcycleSpecifications.com.

Kawasaki ZRX1200 (2010-11)

admin — Thu, 06 Apr 2023 02:20:06 +0000

The Kawasaki ZRX1200 (2010-11) is a powerful motorcycle with a liquid cooled, four-stroke, transverse four cylinder, DOHC engine that has a capacity of 1165cc. It has a compression ratio of 10.1:1 and is induced with 4x Keihin CVK36 carburetors. The bike has a maximum power output of 122 hp/88.9 kW @ 8500 rpm and maximum torque of 112 Nm/82.6 lb-ft @ 7000 rpm. It has a 5-speed transmission with a final drive of chain. The front suspension comprises a 43mm fully adjustable, conventional cartridge-type fork that offers 12-way compression and rebound damping adjustment as well as fork spring preload. The rear suspension is fully adjustable. The front brakes consist of two 310mm discs with 6 piston calipers, while the rear brake has a single 250mm disc with 2 piston caliper. The motorcycle has a wheelbase of 1465mm/57.7in with a seat height of 790mm/31.1in. It has a fuel capacity of 19 litres/5.0 US gal and a consumption average of 17.6 km/lit. The bike can reach a standing 1/4 mile time of 10.9 sec and has a top speed of 246 km/h/152.8 mph.

Technical specifications:

Make Model: Kawasaki ZRX 1200R

Year: 2010 – 11
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.
Capacity: 1165 cc / 71.0 cu-in
Bore x Stroke: 79 x 59.4 mm.
Cooling System: Liquid cooled
Compression Ratio: 10.1:1
Induction: 4x Keihin CVK36 carburetors
Ignition: Digital with K-TRICK
Starting: Electric
Max Power: 122 hp / 88.9 kW @ 8500 rpm
Max Torque: 112 Nm / 82.6 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 43 mm fully adjustable, conventional cartridge-type fork, offers 12-way compression and rebound damping adjustment as well as fork spring preload
Rear Suspension: Fully adjustable rear shock
Front Brakes: 2x 310mm discs 6 piston calipers
Rear Brakes: Single 250mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1465 mm / 57.7 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 223 kg / 491.6 lbs
Fuel Capacity: 19 Litres / 5.0 US gal
Consumption Average: 17.6 km/lit
Standing 1/4 Mile: 10.9 sec
Top Speed: 246 km/h / 152.8 mph

The post Kawasaki ZRX1200 (2010-11) appeared first on MotorcycleSpecifications.com.

Yamaha XVS 1100 V Star Custom (2010-11)

admin — Thu, 06 Apr 2023 01:35:01 +0000

Yamaha XVS 1100 V-Star Custom is a cruiser motorcycle model manufactured between 2010 and 2011. It has a four-stroke, 75-degree V-twin cylinder SOHC engine with a capacity of 1063 cc and is air-cooled with a compression ratio of 8.3:1. The motorcycle is equipped with carburetors ignition and can be started electrically. It has a maximum power of 62 hp at 5750 rpm and a maximum torque of 85 Nm at 2500 rpm. The transmission is a five-speed gearbox with a shaft final drive. The front suspension consists of a 41mm telescopic fork with 140mm of wheel travel, while the rear suspension has a link-type, preload-adjustable single rear shock with 110mm wheel travel. The brakes are dual 298mm discs with two-piston calipers at the front and a single 282mm disc with a one-piston caliper at the rear. The motorcycle rolls on 110/90-18 front and 170/80-15 rear tires. The dimensions of the motorcycle are 2405mm in length, 895mm in width, and 1100mm in height. The wheelbase is 1640mm with a seat height of 690mm. The dry weight of the motorcycle is 259kg, while the wet weight is 275kg. The fuel capacity of the motorcycle is 17 litres or 4.4 US gallons. The Yamaha XVS 1100 V-Star Custom is an excellent cruiser motorcycle with advanced features and a design that offers a comfortable ride.

Technical specifications:

Make Model: Yamaha XVS 1100 V-Star Custom

Year: 2010 – 11
Engine: Four stroke, 75 degrees V-twin cylinder SOHC, 4 valve per cylinder
Capacity: 1063 cc / 64.8 cu-in
Bore x Stroke: 95 x 75 mm
Cooling System: Air cooled
Compression Ratio: 8.3:1
Induction: Carburetors
Ignition: TCI
Starting: Electric
Max Power: 62 hp / 45.2 kW @ 5750 rpm
Max Torque: 85 Nm / 62.7 lb-ft @ 2500 rpm
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: 41mm telescopic front fork
Front Wheel Travel: 140 mm / 5.5 in
Rear Suspension: Link-type, preload-adjustable single rear shock
Rear Wheel Travel: 110 mm / 4.4 in
Front Brakes: 2x 298mm discs 2 piston calipers
Rear Brakes: Single 282mm disc 1 piston caliper
Front Tyre: 110/90-18
Rear Tyre: 170/80-15
Dimensions: Length 2405 mm / 94.7 in Width 895 mm / 35.2 in Height 1100 mm / 43.3 in
Wheelbase: 1640 mm / 64.6 in
Seat Height: 690 mm / 27.2 in
Dry Weight: 259 kg / 567.6 lb
Wet Weight: 275kg / 605 lbs
Fuel Capacity: 17 Litres / 4.4 US gal

The post Yamaha XVS 1100 V Star Custom (2010-11) appeared first on MotorcycleSpecifications.com.

Moto Guzzi V 7 Classic (2010-11)

admin — Wed, 05 Apr 2023 20:38:58 +0000

The 2010-11 Moto Guzzi V7 Classic motorcycle is equipped with a four-stroke, V-twin, longitudinally mounted engine with a capacity of 744cc. The bike has a Weber-Marelli electronic injection system and Magneti Marelli electronic digital ignition. It has a maximum power of 48hp and a maximum torque of 58Nm. The clutch is a single-disc, dry, with a cush drive and the transmission is a 5-speed with a final drive of a shaft with a ratio of 4.825. The frame is a detachable tubular duplex cradle, and the front suspension has Marzocchi 40mm telescopic forks with the rear suspension consisting of a swinging arm in light cast alloy with two dampers and adjustable preload. The front brake has single 320mm discs and 2-piston calipers, while the rear brake has a single 260mm disc with 2-piston calipers. The motorcycle has a dry weight of 182kg and is 2185mm in length, 800mm in width, and 1115mm in height. It comes with a 17-liter fuel capacity and a 2.5-liter reserve. It has an average fuel consumption of 16.2km/lit and can reach a top speed of 165km/h.

Technical specifications:

Make Model: Moto Guzzi V7 Classic

Year: 2010 – 11
Engine: Four stroke, V twin, longitudinally mounted, OHV, 2 valves per cylinder.
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Exhaust: Twin raised silencers.
Induction: Weber- Marelli electronic injection
Ignition: Magneti Marelli electronic digital
Battery: 12 V – 330 Watt Voltage 12 V – 14 Amp/h
Alternator: 12 V – 55/60 W
Starting: Electric
Exhaust system: 3 way catalytic converter with twin oxygen sensor
Max Power: 48 hp 35 kW @ 6200 rpm
Max Torque: 58 Nm 40.3 lb-ft @ 5000 rpm
Clutch: Single disc, dry, with cush drive
Transmission: 5 Speed
Final Drive: Shaft, ratio 4.825
Frame: Detachable tubular duplex cradle
Front Suspension: Marzocchi 40 mm telescopic front forks
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Swinging arm in light cast alloy with two dampers and adjustable preload
Rear Wheel Travel: 118 mm / 4.6 in
Front Brakes: Single 320mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 2 piston caliper
Front Tyre: 100/70-18
Rear Tyre: 130/80-17
Trail: 109 mm / 4.29 in
Steering Rake: 27 degrees
Steering Angle: 32 degrees
Dimensions: Length 2185 mm / 86 in Width 800 mm / 31.8 in Height 1115 mm / 43.8 in
Minimum ground clearance: 182 mm / 7.2 in
Wheelbase: 1449 mm / 57.0 in
Seat Height: 805 mm / 31.7 in
Dry Weight: 182 kg / 401 lb
Wet Weight: 198 kg / 436 lbs
Fuel Capacity: 17 Litres / 4.5 gal
Reserve: 2.5 Litres / 0.66 gal
Consumption Average: 16.2 km/lit
Standing 1/4 Mile: 16.3 sec
Top Speed: 165.0 km/h

The post Moto Guzzi V 7 Classic (2010-11) appeared first on MotorcycleSpecifications.com.

Aprilia SXV 550 (2010-11)

admin — Wed, 05 Apr 2023 19:29:12 +0000

The 2010-11 Aprilia SXV 550 is a four-stroke, 77-degree V-twin motorcycle with a 549cc capacity and a compression ratio of 12.0:1. It features a liquid cooling system, dry sump lubrication with an external oil tank, and an integrated engine management system controlling ignition and fuel injection. With a maximum power of 52.2 kW or 70 hp, the bike has a five-speed transmission with a chain final drive. It has a steel perimeter frame with alloy vertical members, a front suspension of approximately 48mm upside-down fork, and a rear suspension of a box-section aluminium swingarm with a cast body and hydraulic monoshock. The front brakes consist of a single approximately 320mm disc with a four-piston caliper, and the rear brakes use a single approximately 240mm disc with a two-piston caliper. The front tyre has dimensions of 120/70 -17, and the rear tyre measures 180/55 -17.

Technical specifications:

Make Model: Aprilia SXV 550

Year: 2010 – 11
Engine: Four stroke, 77 degrees V-twin, SOHC
Capacity: 549 cc / 33.5 cu in
Bore x Stroke: 80 x 55mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Lubrication System: Dry sump with external oil tank. Separate gearbox lubrication.
Induction: Integrated engine management system controlling ignition and fuel injection. Throttle body: ~A38 mm
Ignition: Electronic
Starting: Electric
Clutch: Cable operated multi-plate wet clutch.
Max Power: 52.2 kW / 70 hp
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 1st 13:30 / 2nd 15:27 / 3rd 16:23 / 4th 20:23 / 5th 21:21
Frame: Steel perimeter frame with alloy vertical members
Front Suspension: ~A48 mm Upside down fork, double adjustment.
Rear Suspension: Box section aluminium swingarm with cast body, hydraulic monoshock with compression and rebound adjustment
Front Brakes: Single ~A320mm disc, 4 piston caliper
Rear Brakes: Single ~A240mm disc, 2 piston caliper
Front Tyre: 120/70 -17
Rear Tyre: 180/55 -17

The post Aprilia SXV 550 (2010-11) appeared first on MotorcycleSpecifications.com.

Harley Davidson XL 1200L Sportster Low (2010-11)

admin — Wed, 05 Apr 2023 18:45:01 +0000

The Harley Davidson XL 1200L Sportster Low was produced from 2010 to 2011 and features a four-stroke, 45 degree V-twin evolution engine. The capacity of the engine is 1199cc and it has a compression ratio of 9.7:1. The motorcycle is air-cooled and has an electronic sequential port fuel injection induction system. It has a digital CDI ignition and an electric starting system. The maximum torque the motorcycle can achieve is 107.3Nm at 4000 rpm. The motorcycle has a wet 9-plate clutch and a 5-speed transmission system. Its final drive is a belt and its primary drive is a chain with a 57/38 ratio. The motorcycle has a mild steel, tubular frame with circular sections and cast junctions. Its coil-over rear suspension has dual-adjustable preload shocks. Its front and rear brakes are single 292mm and 260mm discs, respectively. The motorcycle’s front and rear tires are 100/90-19 57H and 150/80B16 71H, respectively. It has a rake of 29.6 degrees and a trail of 120mm. The motorcycle’s length, width, and height are 2263.1mm, 894.1mm, and 1188.7mm, respectively. Its wheelbase is 1516mm and its seat height (laden) is 668mm. The motorcycle has a gross vehicle weight rating of 453.60kg and a dry weight of 257kg. Its fuel capacity is 17 liters (4.5 US gallons).

Technical specifications:

Make Model: Harley Davidson XL 1200L Sportster Low

Year: 2010 – 11
Engine: Fur stroke, 45 degrees V-Twin Evolution (R) Valve Train Pushrod-operated, OHV, 2 valves per cylinder
Capacity: 1199 cc / 73.2 cu-in
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Lubrication: Dry-sump
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107.3 Nm / 79 lb-ft @ 4000 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Chain, 57/38 ratio
Gear Ratio: 1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517
Frame: Mild steel, tubular frame, circular sections, cast junctions
Rear Suspension: Coil-over, dual-adjustable preload chocs
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 100/90-19 57H
Rear Tyre: 150/80B16 71H
Rake: 29.6 degrees
Trail: 120 mm / 4.7 in
Dimensions: Length 2263.1 mm / 89.1 in Width 894.1 mm / 35.2 in Height 1188.7 mm / 46.8 in
Wheelbase: 1516 mm / 59.7 in
Seat Height: Laden 668. mm / 26.30 in. Unladen 711.2 mm / 28.0 in.
Ground Clearance: 112 mm / 4.1 in
Gross Vehicle Weight Rating: 453.60 kg / 1000 lbs
Dry Weight: 257 kg / 557 lbs
Wet Weight: 263.5 kg / 581 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Harley Davidson XL 1200L Sportster Low (2010-11) appeared first on MotorcycleSpecifications.com.

MV Agusta F4 (2010-11)

admin — Wed, 05 Apr 2023 18:35:00 +0000

The MV Agusta F4 motorcycle was produced in 2010-11 and features a four-stroke, transverse four-cylinder engine with a capacity of 998cc. The bike has a liquid-cooled cooling system and 13.1:1 compression ratio. Induction is provided by a Magneti Marelli IAW 7BM ignition and injection integrated system with Mikuni throttle body, induction discharge electronic ignition, sequential timed “multipoint” electronic injection, and variable height intake ducts with torque shift system (TSS). The bike is powered by a multipoint electronic injection, and the maximum power is 137 kW/186 hp at 12,900 rpm. The maximum power of the restricted version is 73 kW/100 hp at 9200 rpm. The clutch is a wet multi-disc one, and the transmission has six speeds. The final drive is a chain, and the bike has a frame consisting of CrMo steel tubular trellis TIG welded with an aluminum alloy. It comes with 50mm “upside-down” telescopic hydraulic fork front suspension and progressive single shock absorbers with rebound and compression damping and spring preload adjustment and an aluminum alloy swingarm as the rear suspension. The front and rear brakes are respectively 2x 320mm discs 4 piston calipers and a single 210mm disc 4 piston caliper. The front and rear tires are 120/70 ZR17 and 190/55 ZR17 respectively. The bike weighs 192 kg/42 lbs when dry, and its fuel capacity is 17 litres/4.4 US gal.

Technical specifications:

Make Model: MV Agusta F4

Year: 2010 – 11
Engine: Four stroke, transverse four cylinder. DOHC, 4 radial valves per cylinder
Capacity: 998 cc / 60.9 cu-in
Bore x Stroke: 76 x 55 mm
Cooling System: Liquid cooled
Compression Ratio: 13.1:1
Induction: Magneti Marelli IAW 7BM ignition – injection integrated system with Mikuni throttle body; induction discharge electronic ignition; Sequential timed “Multipoint” electronic injection ; Variable height intake ducts with Torque Shift System (TSS)
Ignition: Multipoint electronic injection
Starting: Electric
Max Power: 137 kW / 186 hp @ 12900 rpm
Max Power Restricted Version: 73 kW / 100 hp @ 9200 rpm
Max Torque: 114 Nm / 11.4 kgf-m @ 9500 rpm
Max Torque Restricted Version: 90 Nm / 9.0 kgf-m @ 5500 rpm
Clutch: Wet, multi disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 13/38 -128,2 km/h 79.6 mph @ 13500 rpm 2nd 16/34 – 176,4 km/h 109.5 mph @ 13500 rpm 3rd 18/32 – 210,8 km/h 130.9 mph @ 13500 rpm 4th 20/30 – 249,8 km/h 155.1 mph @ 13500 rpm 5th 22/29 – 284,3 km/h 176.5 mph @ 13500 rpm 6th 19/23 – 05,0 km/h 189.4 mph @ 13500 rpm
Frame: CrMo Steel tubular trellis (TIG welded), Aluminium alloy
Front Suspension: 50mm “UPSIDE – DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Progressive, single shock absorber with rebound and compression (High speed / Low speed) damping and spring preload adjustment, Aluminium alloy Single sided swing arm
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 210mm disc 4 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Dimensions: Length 2100 mm / 82.63 in Width 750 mm / 29.51 in
Wheelbase: 1430 mm / 56.2 in
Seat Height: 860 mm / 33.8 in
Dry-Weight: 192 Kg / 42 lbS
Fuel Capacity: 17 Litres / 4.4 US gal

The post MV Agusta F4 (2010-11) appeared first on MotorcycleSpecifications.com.

Suzuki DR200SE (2010-11)

admin — Wed, 05 Apr 2023 10:59:57 +0000

The Suzuki DR200SE is a motorcycle model produced in the years 2010-11. It has a four-stroke, single-cylinder, OHC engine with a capacity of 198.5 cc and a compression ratio of 9.4:1. The Mikuni BST31 induction and digital CDI ignition system ensure smooth starting and optimal performance. It has a maximum power of 15.5 kW / 20 hp at 8500 rpm and a maximum torque of 18.6 Nm at 7000 rpm, and is equipped with a 5-speed transmission with a chain final drive. The frame is a semi-double cradle, and it has telescopic, oil-damped front suspension and a mono-shock, oil-damped rear suspension with adjustable preload. The front and rear brakes are single disc 230mm and drum 130mm respectively, and it has tube-type tyres with dimensions 100/70-21 M/C 44P at the front and 100/90-18 M/C 56P at the rear. The bike has a length of 2150mm, a width of 805mm, a height of 1185mm, and a seat height of 810mm, with a wheelbase of 1405mm and a ground clearance of 260mm. The dry weight is 113kg, and the wet weight is 126kg. It has a fuel capacity of 13 litres, which is equivalent to 3.4 US gal or 2.9 Imp gal.

Technical specifications:

Make Model: Suzuki DR 200SE

Year: 2010 – 11
Engine: Four stroke, single cylinder, OHC, 2 valves per cylinder.
Capacity: 198.5 cc / 12.1 cu in
Bore x Stroke: 66 x 58.2 mm
Cooling System: Air cooled
Lubrication System: Wet sump
Compression Ratio: 9.4:1
Induction: Mikuni BST31
Ignition: Digital CDI
Spark Plug: NGK DR8EA
Starting: Electric
Max Power: 15.5 kW / 20 hp @ 8500 rpm
Max Torque: 18.6 Nm / 1.9 kgf-m / 13.7 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain, #520, 112 links
Frame: Semi-double cradle
Front Suspension: Telescopic, oil damped
Front Wheel Travel: 206 mm / 8.1 in
Rear Suspension: Mono shock, oil damped, adjustable preload
Front Brakes: Single disc 230 mm
Rear Brakes: Drum, 130 mm
Front Tyre: 100/70-21 M/C 44P, tube type
Rear Tyre: 100/90-18 M/C 56P, tube type
Dimensions: Length: 2150 mm / 85.0 in Width: 805 mm / 31.7 in Height: 1185 mm / 46.7 in
Seat Height: 810 mm /31.9 in
Wheelbase: 1405 mm / 55.3 in
Ground Clearance: 260 mm / 10.2 in
Dry Weight: 113 kg / 249 lbs
Wet Weight: 126 kg / 278 lbs
Fuel Capacity: 13 Litres / 3.4 US gal / 2.9 Imp gal

The post Suzuki DR200SE (2010-11) appeared first on MotorcycleSpecifications.com.

Moto Guzzi California Vintage (2010-11)

admin — Wed, 05 Apr 2023 01:14:10 +0000

The Moto Guzzi California Vintage motorcycle was produced in 2010-11 and features a four-stroke, 90-degree V twin engine with a capacity of 1064 cc. It has an air-cooled cooling system, forced lobes lubrication, and a single disc clutch. The bike has a shaft final drive and a detachable tubular duplex cradle frame made of special high-strength steel. The front suspension is a 45mm Marzocchi hydraulic telescopic fork that is adjustable separately, while the rear suspension is a swingarm with two hydraulic shock absorbers, extension adjustable. The front brakes are dual 320mm discs with four-piston calipers, and the rear brake is a single 282mm disc with a two-piston caliper. The bike’s trail is 116mm, and its wheelbase is 1560mm, with a seat height of 780mm. The California Vintage has a ground clearance of 190mm, weighs 263kg, and has a fuel capacity of 19 liters. The engine produces a maximum power of 55kW at 6400 RPM and a maximum torque of 88 Nm at 5000 RPM. The bike has a 5-speed transmission, a 2-into-2 exhaust, and a three-way catalyzer with a lambda sensor (Euro 3). The California Vintage uses the Magneti Marelli IAW alfa-n system with a multipoint phased sequential fuel injection, and the ignition is the Magneti Marelli IAW 15RC electronic digital ignition with inductive spark. The front and rear tires are 110/90 VB18 and 140/70 VB17, respectively. The bike has a length of 2380mm, a width of 815mm, and a height of 1389mm.

Technical specifications:

Make Model: Moto Guzzi California Vintage

Year: 2010 – 11
Engine: Four stroke, 90 degrees V twin, longitudinally mounted, OHV, 2 valve per cylinder.
Capacity: 1064 cc / 64.9 cu-in
Bore x Stroke: 92 x 80 mm
Cooling System: Air cooled
Compression Ratio: 9.8:1
Lubrication: Forced lobes, with geared pump and pressure regulator
Exhaust: 2 into 2 exhaust; three-way catalyzer with Lambda sensor (Euro 3)
Induction: Magneti Marelli IAW alfa-n system Multipoint phased sequential fuel; 2 nozzle holders of 40 mm with injectors Weber IW 031
Ignition: Magneti Marelli IAW 15RC electronic digital ignition with inductive spark
Starting: Electric
Max Power: 55 kW / 74 hp @ 6400 rpm
Max Torque: 88 Nm / 64.9 lb-ft @ 5000 rpm
Clutch: Single disc, dry, with mechanical control
Transmission: 5 Speed
Final Drive: Shaft
Gear Ratio: 1st 14/28 = 1: 2 2st 18/25 = 1: 1,389 3rd 21/22 = 1: 1,048 4th 23/20 = 1: 0,870 5th 28/21 = 1: 0,750
Frame: Detachable tubular duplex cradle in special high-strengh steel
Front Suspension: 45mm Marzocchi hydraulic telescopic fork, adjustable separately
Front Wheel Travel: 140 mm / 5.5 in
Rear Suspension: swing arm with 2 hydraulic shock absorbers, exstension adjustable
Rear Wheel Travel: 96 mm / 3.8 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 282mm disc 2 piston caliper
Front Tyre: 110/90 VB18
Rear Tyre: 140/70 VB17
Rake: 29.0 degrees
Trail: 116 mm / 4.6 in
Dimensions: Height 1389 mm / 54.7 in Length 2380 mm / 93.7 in Width 815 mm / 32.1 in
Wheelbase: 1560 mm / 61.4 in
Seat Height: 780 mm / 30.7 in
Ground Clearance: 190 mm / 7.5 in
Dry Weight: 263 kg / 580 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Moto Guzzi California Vintage (2010-11) appeared first on MotorcycleSpecifications.com.

Yamaha WR 250 R (2010-11)

admin — Tue, 04 Apr 2023 23:10:57 +0000

The Yamaha WR 250R is a four-stroke, single-cylinder motorcycle with a capacity of 249cc. It has a liquid-cooled engine with a compression ratio of 11.8:1 and uses electronic fuel injection for induction. The bike has a maximum power of 22.6 kW at 10,000 rpm and a maximum torque of 23.7 Nm at 8,000 rpm. It has a six-speed transmission with a chain final drive.

The front suspension consists of a telescopic fork with 280mm of travel and the rear suspension is swingarm link suspension with a mono-shock and 270mm of travel. The front brake is a single 250mm disc and the rear brake is a single 230mm disc. The rims are 1.60×21 inches in the front and 2.15×18 inches in the rear with tires measuring 80/100-21 and 120/80-18, respectively.

The bike has a wheelbase of 1420mm and a seat height of 930mm with a dry weight of 126kg. It has a fuel capacity of 7.6 litres and can average 28.0 km/lit of fuel consumption. The standing quarter-mile time is 16.2 seconds and the top speed is 131.9 km/h or 82 mph. Reviewers at Motorcycle.com gave the bike a generally positive review.

Technical specifications:

Make Model: Yamaha WR 250R

Year: 2010 – 11
Engine: Four stroke, single cylinder, DOHC, 4 valve
Capacity: 249 / 15.2 cub in.
Bore x Stroke: 77 x 53.6 mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Lubrication: Dry sump
Induction: Electronic fuel injection
Ignition: TCI
Starting: Electric
Max Power: 22.6 kW / 30.3 hp @ 10 000 rpm
Max Torque: 23.7 Nm 2.42 kgf-m / 17.5 lb-ft. @ 8 000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Front Wheel Travel: 280 mm / 11.0 in.
Rear Suspension: Swingarm link suspension, mono-shock
Rear Wheel Travel: 270 mm / 10.6 in.
Front Brakes: Single 250mm disc
Rear Brakes: Single 230mm disc
Front Rim: 1.60 x 21 in
Front Tyre: 80/100 -21
Rear Rim: 2.15 x 18 in.
Rear Tyre: 120/80 -18
Wheelbase: 1420 mm / 55.9 in.
Seat Height: 930 mm / 36.6 in
Dry Weight: 126 kg / 278 lbs
Fuel Capacity: 7.6 Litres / 2.0 US gal
Consumption Average: 28.0 km/lit
Standing 1/4 Mile: 16.2 sec
Top Speed: 131.9 km/h / 82 mph
Review: Motorcycle.com

The post Yamaha WR 250 R (2010-11) appeared first on MotorcycleSpecifications.com.

Kawasaki KLR 650 (2010-11)

admin — Tue, 04 Apr 2023 19:33:02 +0000

The Kawasaki KLR 650 motorcycle was produced in 2010-2011 and has a four-stroke, single-cylinder, DOHC engine with a capacity of 651cc. It has a liquid cooling system and a compression ratio of 9.8:1. The bike is equipped with a Keihin CVK40 induction and forced lubrication (wet sump) system with a semi-synthetic, 10W/40 engine oil. It has an electric start, and its maximum power is 42.1 hp at 7000 rpm. The KLR 650 has a semi-double cradle frame made of high-tech, round-section, high-tensile steel, and a front suspension with 41mm air-adjustable forks, offering 200mm/7.8in of travel. The bike has a UNI-TRAK rear suspension with a 5-way preload shock absorber, offering a 4-way rebound damping and 185mm/7.2in of travel. The front brakes consist of a single 280mm disc with a 2 piston caliper, while the rear brakes have a single 203mm disc with a 1 piston caliper. The KLR 650 uses a sealed chain for final drive and has a 5-speed transmission. It has a length of 2295mm/90.4in, width of 960mm/37.8in, height of 1350mm/53.1in, and a wheelbase of 1480mm/58.3in. The ground clearance is 210mm/8.3in, and the seat height is 889mm/35in. The motorcycle weighs 194kg/432lbs, and the fuel tank capacity is 23 litres/5.8 US gallons.

Technical specifications:

Make Model: Kawasaki KLR 650

Year: 2010 – 11
Engine: Four stroke, single cylinder, DOHC, 4 valves per cylinder
Capacity: 651 cc / 39.7 cu-in
Bore x Stroke: 100 x 83 mm.
Cooling System: Liquid cooled
Compression Ratio: 9.8:1
Induction: Keihin CVK40
Lubrication: Forced lubrication (wet sump)
Engine Oil: Semi-Synthetic, 10W/40
Spark Plug: NGK, DPR 8EA/9
Ignition: Transistorized
Starting: Electric
Max Power: 42.1 hp / 31 kW @ 7000 rpm
Max Torque: 47 Nm / 4.7 kgf-m @ 5000 rpm
Clutch: Wet multi-disc, cable operation
Transmission: 5 Speed
Final Drive: Sealed Chain
Primary Reduction Ratio: 2.272 / 75/33
Gear Ratio: 1st 2.266 (34/15) 2nd 1.444 (26/18) 3rd 1.136 (25/22) 4th 0.954 (21/22) 5th 0.791 (19/24)
Final Reduction Ratio: 2.867 (43/15)
Frame: Semi-double Cradle Made of high-tech, round-section, high-tensile steel
Front Suspension: 41mm Air-adjustable forks,
Front Wheel Travel: 200 mm / 7.8 in
Rear Suspension: UNI-TRAK (R) linkage, 5-way preload shock absorber with 4way rebound damping.
Rear Wheel Travel: 185 mm / 7.2 in
Front Brakes: Single 280mm disc 2 piston caliper
Rear Brakes: Single 203mm disc 1 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 130/80 -17
Rake: 28.0 degrees
Trail: 112 mm / 4.4 in
Dimensions: Length 2295 mm / 90.4 in Width 960 mm / 37.8 in Height 1350 mm / 53.1 in
Wheelbase: 1480 mm / 58.3 in
Ground Clearance: 210 mm / 8.3 in
Seat Height: 889 mm / 35 in
Wet Weight: 194 kg / 432 lbs
Fuel Capacity: 23 Litres / 5.8 US gal.

The post Kawasaki KLR 650 (2010-11) appeared first on MotorcycleSpecifications.com.

KTM 530 EXC (2010-11)

admin — Tue, 04 Apr 2023 19:27:01 +0000

The KTM 530 EXC is a versatile off-road motorcycle with impressive performance and durability. It has a powerful 4-stroke engine that can generate up to 43 horsepower, and the fuel injection system ensures smooth acceleration and better fuel efficiency.

The bike features a high-quality suspension system that allows riders to tackle tough terrain with ease. The front suspension is a WP USD 48mm fork, while the rear suspension is a WP PDS shock absorber with adjustable rebound damping.

Other noteworthy features of the KTM 530 EXC include Brembo brakes, a digital speedometer, and high-quality Dunlop tires. The bike also has an ergonomic design that ensures comfort during long rides.

Overall, the KTM 530 EXC is an excellent choice for riders who want a high-performance off-road bike that can handle a variety of terrains. Its combination of power, durability, and comfort make it a top pick for anyone looking for an adventure on two wheels.

Technical specifications:

The post KTM 530 EXC (2010-11) appeared first on MotorcycleSpecifications.com.

Honda CBF600S (2010-11)

admin — Tue, 04 Apr 2023 08:11:18 +0000

The Honda CBF 600S motorcycle was produced from 2010-11 and has a four-stroke, transverse four cylinder, DOHC engine with a capacity of 599cc/36.5 cu-in. The cooling system is liquid cooled, and the induction system is electronic fuel injection. The bike has a maximum power of 76.4 hp/57 kW at 10500 rpm and a maximum torque of 58 Nm/42.7 lb-ft at 8000 rpm. It has a chain-driven six-speed transmission and front and rear brakes with anti-lock braking system (ABS). The front suspension is a 41mm telescopic fork, and the rear suspension is a monoshock damper with a 7-step adjustable preload. The bike has U-section twin 6-spoke cast aluminum wheels with front and rear tires measuring 120/70 ZR17 and 160/60 ZR17, respectively. Its height is 1240mm/48.8in, length is 2160mm/85.0in, width is 765mm/30.1in, and wheelbase is 1490mm/58.7in with a ground clearance of 130mm/5.1in. The seat height is 785mm/30.9in, and the dry weight of the bike is 218kg/480lbs. The fuel tank capacity is 20 liters/5.2 US gal, and the average fuel consumption is 20.0 km/lit. The bike can reach a standing 1/4 mile in 12.8 seconds and has a top speed of 202.4 km/h.

Technical specifications:

Make Model: Honda CBF 600S

Year: 2010-11
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.
Capacity: 599 cc / 36.5 cu-in
Cooling System: Liquid cooled
Bore x Stroke: 65 x 45.2 mm
Compression Ratio: 11.6:1
Induction: Electronic fuel injection 32mm throttle body
Ignition: Computer-controlled digital transistorized
Starting: Electric
Max Power: 76.4 hp / 57 kW @ 10500 rpm
Max Torque: 58 Nm / 42.7 lb-ft @ 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 41mm telescopic fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock damper with 7-step adjustable preload
Rear Wheel Travel: 125 mm / 4.9 in
Front Brakes: 2x 296mm discs 2 piston calipers (ABS)
Rear Brakes: Single 240mm disc 1 piston caliper (ABS)
Wheels: U-section twin 6-spoke cast aluminium
Front Tyre: 120/70 ZR17
Rear Tyre: 160/60 ZR17
Dimensions: Height 1240 mm / 48.8 in Length 2160 mm / 85.0 in Width 765 mm / 30.1 in
Wheelbase: 1490 mm / 58.7 in
Ground Clearance: 130 mm /5.1 in
Seat Height: 785 mm / 30.9 in
Dry Weight: 218 kg / 480 lbs
Fuel Capacity: 20 Liters / 5.2 US gal
Consumption Average: 20.0 km/lit
Standing 1/4 Mile: 12.8 sec
Top Speed: 202.4 km/h

The post Honda CBF600S (2010-11) appeared first on MotorcycleSpecifications.com.

Kawasaki Ninja 400 R (2010-11)

admin — Mon, 03 Apr 2023 22:10:12 +0000

The Kawasaki Ninja 400 R is a motorcycle from the year 2010-11. It is powered by a four-stroke, parallel-twin cylinder engine with a capacity of 399 cc. The engine has a maximum power output of 42 hp at 9500 rpm and a maximum torque of 37 Nm at 7500 rpm. The fuel injection system has Keihin 34 mm x 2 throttle bodies. The bike has a six-speed transmission with a wet, cable-operated clutch and chain final drive. The frame is made of high-tensile steel with a perimeter design. The front suspension consists of a 41 mm telescopic fork and the rear suspension has an offset laydown single-shock with adjustable preload. The bike has a front dual-disc brake system with 2 piston calipers and a single 220mm disc brake in the rear. The front tire is 120/70ZR17 and the rear tire is 160/60ZR17. The dimensions of the bike are 2101 mm in length, 759 mm in width, and 1199 mm in height with a wheelbase of 1410 mm. The seat height is 790 mm and the ground clearance is 145 mm. The wet weight of the bike is 203 kg and it has a fuel capacity of 15 liters.

Technical specifications:

Make Model: Kawasaki Ninja 400

Year: 2010 – 11
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder.
Capacity: 399 cc / 24.3 cu-in
Bore x Stroke: 68.4 x 54.3 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Lubrication: Wet sump
Induction: Fuel injection: ~A,34 mm x 2 Keihin
Ignition: TCBI with digital advance / electric
Starting: Electric
Max Power: 42 hp / 32 kW @ 9500rpm
Max Torque: 37 Nm / 27 lb-ft @ 7500 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 3.000 (42/14) 2nd 2.167 (39/18) 3rd 1.640 (41/25) 4th 1.360 (34/25) 5th 1.192 (31/26) 6th 1.040 (26/25)
Frame: High-tensile steel, perimeter design
Front Suspension: 41 mm telescopic fork,
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Offset laydown single-shock with adjustable preload,
Rear Wheel Travel: 125 mm / 4.9 in
Front Brakes: 2x 300mm discs 2 piston calipers
Rear Brakes: Single 220mm disc
Front Tyre: 120/70ZR17
Rear Tyre: 160/60ZR17
Dimensions: Length 2101 mm / 82.7 in Width 759 mm / 29.9 in Height 1199 mm / 47.2 in
Wheelbase: 1410 mm / 55.5 in
Seat Height: 790 mm / 31.1 in
Ground Clearance: 145 mm / 5.7 in
Wet Weight: 203 kg / 447.5lbs
Fuel Capacity: 15 Litres / 3.9 US gal

The post Kawasaki Ninja 400 R (2010-11) appeared first on MotorcycleSpecifications.com.

Moto Guzzi V7 Clubman Racer (2010-11)

admin — Mon, 03 Apr 2023 21:26:04 +0000

The Moto Guzzi V7 Clubman Racer is a motorcycle from the years 2010-11 that features a four-stroke, V-twin, longitudinally mounted engine with a capacity of 744cc. It has a compression ratio of 9.6:1 and uses a Weber-Marelli electronic injection system for fuel delivery. The engine produces a maximum power of 48hp and maximum torque of 58Nm. It has a single disc clutch and a 5-speed transmission with a final drive ratio of 4.825. The motorcycle has a detachable tubular duplex cradle frame and Marzocchi 40mm telescopic front forks for suspension. The front wheels have single 320mm discs with 4-piston calipers while the rear uses a single 260mm disc with 1-piston caliper for braking. The motorcycle has black anodized aluminum-spoked rims with 110/90/18 front and 130/80/17 rear tires. The dimensions of the motorcycle are 2185mm length, 800mm width, and 1115mm height, with a ground clearance of 182mm and a wheelbase of 1449mm. The seat height is 805mm, and the dry weight is 182kg. The motorcycle has a fuel capacity of 17 liters, with a reserve of 2.5 liters.

Technical specifications:

Make Model: Moto Guzzi V7 Clubman Racer

Year: 2010 – 11
Engine: Four stroke, V twin, longitudinally mounted, OHV, 2 valves per cylinder.
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Induction: Weber- Marelli electronic injection
Lubrication: Wet sump, by lobes with pressure pump
Exhaust: 3 ways catalyzed with sonda Lambda
Ignition: Magneti Marelli electronic digital
Battery: 12 V – 330 Watt Voltage 12 V – 14 Amp/h
Alternator: 12 V – 55/60 W
Starting: Electric
Max Power: 48 hp / 35 kW @ 6200 rpm
Max Torque: 58 Nm / 40.3 lb-ft @ 5000 rpm
Clutch: Single disc, dry, with cush drive
Transmission: 5 Speed
Final Drive: Shaft, ratio 4.825
Gear Ratios: 1st 11/26 = 1: 2.3636 2nd 14/23 = 1: 1.6429 3rd 18/23 = 1: 1.2778 4th 18/19 = 1: 1.0556 5th 25/22 = 1: 0.9
Frame: Detachable tubular duplex cradle
Front Suspension: Marzocchi 40 mm telescopic front forks
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Swinging arm in light cast alloy with two dampers and adjustable preload
Rear Wheel Travel: 118 mm / 4.6 in
Front Brakes: Single 320mm discs 4 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Wheels: Aluminium spoked black anodised rims
Front Tyre: 110/90/18
Rear Tyre: 130/80 17
Rake: 27.5 degrees
Trail: 109 mm / 4.29 in
Dimensions: Length 2185 mm / 86 in Width 800 mm / 31.8 in Height 1115 mm / 43.8 in
Ground Clearance: 182 mm / 7.2 in
Wheelbase: 1449 mm / 57.0 in
Seat Height: 805 mm / 31.7 in (780 mm / 30.7 in)
Dry Weight: 182 kg / 401.2 lbs
Fuel Capacity: 17 Litres / 4.5 gal
Reserve: 2.5 Litres / 0.66 gal

The post Moto Guzzi V7 Clubman Racer (2010-11) appeared first on MotorcycleSpecifications.com.

Husaberg FS 550 (2010-11)

admin — Mon, 03 Apr 2023 09:50:07 +0000

The Husaberg FS 550 (2010-11) is a four-stroke, single-cylinder, SOHC, 4-valve motorcycle with a capacity of 565.5 cc / 34.5 cu-in. It has a liquid-cooled cooling system, a compression ratio of 12.2:1, and is lubricated by pressure circulation through a trochoit oil pump. The ignition is Kokusan digital, and it has electric starting. The clutch is a wet multi-disc clutch that is hydraulically operated, while the transmission has six speeds. Its final drive comes in the form of a chain.

This motorcycle’s frame consists of a double cradle perimeter design 25CrMo4, while the subframe is made of cross-linked polyethylene. The front suspension uses WP USD 4860 MA Husaberg Enduro and has a wheel travel of 300 mm / 11.8 in. The rear suspension is WP PDS 5018 Husaberg Enduro and has a wheel travel of 320 mm / 12.6 in. The front brakes consist of a single 260mm disc with a 2-piston caliper, while the rear brakes have a single 220mm disc with a 1-piston caliper. The front tire size is 90/90 -21, and the rear tire size is 140/80-18.

This motorcycle has a wheelbase of 1475 mm / 58.7 in, a seat height of 985 mm / 38.8 in, and a ground clearance of 390 mm / 15.4 in. It has a dry weight of 114.5 kg / 252.4 lbs and fuel capacity of 9 Litres / 2.4 US gal. However, the max power and max torque have not been provided.

Technical specifications:

Make Model: Husaberg FE 570 Enduro

Year: 2010 – 11
Engine: Four stroke, single-cylinder, SOHC, 4 valves
Capacity: 565.5 cc / 34.5 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 12.2:1
Lubrication: Pressure circulation, trochoit oil pump
Induction: Keihin EFI Electronic fuel injection.
Ignition: Kokusan digital
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Wet multi-disc clutch, hydraulically operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Double cradle perimeter design 25CrMo4, subframe Cross-linked Polyethylene
Front Suspension: WP USD 4860 MA Husaberg Enduro
Front Wheel Travel: 300 mm / 11.8 in
Rear Suspension: WP PDS 5018 Husaberg Enduro
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single 260mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 140/80-18
Wheelbase: 1475 mm / 58.7 in
Seat Height: 985 mm / 38.8 in
Ground Clearance: 390 mm / 15.4 in
Dry Weight: 114.5 kg / 252.4 lbs
Fuel Capacity: 9 Litres / 2.4 US gal

The post Husaberg FS 550 (2010-11) appeared first on MotorcycleSpecifications.com.

Yamaha Star Raider (2010-11)

admin — Mon, 03 Apr 2023 09:00:09 +0000

The Yamaha Star Raider, also known as the XV 1900 Raider, was produced between 2010 and 2011. The motorcycle is powered by a four-stroke, 48-degree V-twin cylinder engine with a capacity of 1854cc. The engine features a twin-bore fuel injection system and an electronic control unit for ignition. The bike can generate a maximum power of 73.6 kW (100 hp) at 4,250 rpm and a maximum torque of 167.8 Nm (17.1 kgf-m) at 2,500 rpm. The transmission system consists of a five-speed gearbox, and the final drive is a belt. The front suspension system features a 46mm telescopic fork, while the rear suspension system is an adjustable link Monocross. The braking system consists of two 298mm discs at the front and a single 310mm disc at the rear. The front and rear tyres are 120/70-21 and 210/40R18, respectively. The bike has a length of 2570mm (101.2 in), a width of 925 mm (36.4 in), and a height of 1165 mm (45.9 in). The wheelbase is 1800 mm (70.9 in), and the ground clearance is 145 mm (5.7 in). The dry weight of the bike is 331 kg (728.2 lbs), and it has a fuel capacity of 15.9 litres (4.2 US gal).

Technical specifications:

Make Model: Yamaha Star Raider / XV 1900 Raider

Year: 2010 – 11
Engine: Four stroke, 48 degrees V-Twin cylinder, SOHC, 4 valves per cylinder.
Capacity: 1854 cc / 113 cu-in
Bore x Stroke: 100 x 118 mm
Cooling System: Air cooled
Compression Ratio: 9.5;1
Induction: Twin-bore fuel injection (FI)
Ignition: Electronic control unit (ECU)
Starting: Electric
Max Power: 73,6 kW / 100 hp @ 4.250 rpm
Max Torque: 167,8 Nm / 17,1 kgf-m @ 2.500 rpm
Transmission: 5 Speed
Final Drive: Belt
Front Suspension: 46 mm Telescopic fork
Front Wheel Travel: 320 mm / 5.1 in
Rear Suspension: Adjustable link Monocross
Rear Wheel Travel: 88.9 mm / 3.5 in
Front Brakes: 2x 298 mm discs
Rear Brakes: Single 310 mm disc
Front Tyre: 120/70-21
Rear Tyre: 210/40R18
Dimensions: Length 2570mm / 101.2 in Width 925 mm / 36.4 in Height 1165 mm / 45.9 in
Wheelbase: 1800 mm / 70.9 in
Seat Height: 695 mm / 27.4 in
Ground Clearance: 145 mm / 5.7 in
Dry Weight: 331 kg / 728.2 lbs
Fuel Capacity: 15.9 Litres / 4.2 US gal

The post Yamaha Star Raider (2010-11) appeared first on MotorcycleSpecifications.com.

Harley Davidson FLSTFB Softail Fat Boy Lo (2010-11)

admin — Mon, 03 Apr 2023 03:54:01 +0000

The Harley Davidson FLSTFB Softail Fat Boy Lo is a motorcycle model produced from 2010 – 11. It is powered by a four-stroke, Twin Cam 96BTM engine with a capacity of 1584 cc and a compression ratio of 9.2:1. It features Electronic Sequential Port Fuel Injection and a six-speed transmission with a final drive belt. The frame is made of mild steel and includes a tubular frame, rectangular section backbone, and stamped, cast and forged junctions. The front suspension consists of 41.3mm telescopic, chrome dust covers while the hidden, horizontal-mounted, coil-over shock serves as the rear suspension. Other features include a single 292mm disc 4-piston caliper for both front and rear brakes, 140/75R17 front tyre, 200/55R17 rear tyre, a rake of 31.6 degrees, and a trail of 147 mm. The motorcycle measures 2445 mm in length, has a wheelbase of 1715 mm, and a Gross Vehicle Weight Rating of 526.0 kg. The dry weight is 317.5 kg, and the wet weight is 331.70 kg. It has an oil capacity of 3.3 litres and a fuel capacity of 18.9 litres. The seat height is 616 mm when laden and 669 mm when unladen.

Technical specifications:

Make Model: Harley Davidson FLSTFB Softail Fat Boy Lo

Year: 2010 – 11
Engine: Four stroke, Twin Cam 96BTM Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.25 x 111.25 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft. lbs @ 3000 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 41.3 mm telescopic, chrome dust covers
Rear Suspension: Hidden, horizontal-mounted, coil-over shock
Front Brakes: Single 292mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: 140/75R17
Rear Tyre: 200/55R17
Rake: 31.6 degrees
Trail: 147 mm / 5.7 in
Dimensions: Length 2445 mm / 96.2 in
Wheelbase: 1715 mm / 67.5 in
Seat Height: Laden 616 mm /24.3 in Unladen 669 mm / 26.4 in
Gross Vehicle Weight Rating: 526.0 kg / 1160 lbs
Dry Weight: 317.5 kg / 700 lbs
Wet Weight: 331.70 kg / 731.25 lbs
Oil Capacity: 3.3 Litres / 3.50 qts
Fuel Capacity: 18.9 Litres / 5.0 US gal

The post Harley Davidson FLSTFB Softail Fat Boy Lo (2010-11) appeared first on MotorcycleSpecifications.com.

Honda CB400 Bol D (2010-11)

admin — Mon, 03 Apr 2023 01:07:58 +0000

The Honda CB 400 Super Bol D’or was produced between 2010-11 and has a four-stroke, transverse four-cylinder DOHC engine with a capacity of 399cc. It has a liquid cooling system and PGM-FI fuel injection. The maximum power is 53 hp at 11,000 rpm and the maximum torque is 40.18 Nm at 7500 rpm. The bike has a wet, multiple-disc clutch and a six-speed transmission with chain final drive. It has a high-tension steel cradle frame and telescopic forks for the front suspension, and a single shock for the rear. The turning circle is 2.6 meters and the front brakes have two 296mm discs with four-piston calipers, while the rear brake has a single 240mm disc with a two-piston caliper. The bike has 120/60 ZR17 front tires and 160/60 ZR17 rear tires. The rake is 25 degrees, with a trail of 90mm. It is 2080mm long, 725mm wide, and 1160mm high, with a wheelbase of 1410mm and a seat height of 755mm. It has a ground clearance of 130mm, dry weight of 175.0kg and a wet weight of 198kg. The fuel capacity is 18 liters.

Technical specifications:

Make Model: Honda CB 400 Super Bol D’or

Year: 2010-11
Engine: Four stroke, transverse four cylinders, DOHC, 4 valve per cylinder
Capacity: 399 cc / 24.3 cu in
Bore x Stroke: 55 x 42 mm
Cooling System: Liquid cooled,
Compression Ratio: 11.3:1
Induction: PGM-FI fuel injection
Ignition: CDI
Starting: Electric
Max Power: 53 hp / 38.6 kW @ 11000 rpm
Max Torque: 40.18 / Nm @ 7500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1 st 3.307 2nd 2.294 3rd 1.750 4th 1.421 5th1.240 6th 1.130
Frame: High-tension steel cradle frame
Front Suspension: Telescopic forks
Rear Suspension: Single shock
Turning Circle: 2.6 m / 8 ft 6 in
Front Brakes: 2x 296mm discs 4 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Rake: 25 degrees 5
Trail: 90 mm
Dimensions: Llength 2080 mm / 81.8 inWidth 725 mm / 45.6 inHeight 1160 mm / 29.3 in
Wheelbase: 1,410 mm / 55.5 in
Seat Height: 755 mm / 29.7 in
Ground Clearance: 130 mm / 5.1 in
Dry Weight: 175.0 kg / 385.8 lbs
Wet Weight: 198 kg / 437 lbs
Fuel Capacity: 18 Litres / 4.75 gal

The post Honda CB400 Bol D (2010-11) appeared first on MotorcycleSpecifications.com.

BRP Can An Spyder RT Roadster Touring (2010-11)

admin — Sun, 02 Apr 2023 22:50:57 +0000

The BRP Can-Am Spyder RT Audio and Convenience Roadster was a motorcycle produced between 2010 and 2011. It featured a BRP-Rotax four-stroke V-twin engine with a capacity of 998 cc and a compression ratio of 10.8:1. The engine was liquid-cooled and had multi-point EFI with 57mm diameter throttle bodies. The motorcycle had a maximum power output of 106 hp at 8500 rpm and a maximum torque of 77 lb-ft at 6250 rpm. It had a wet, multi-plate clutch and a sequential manual 5-speed transmission with transmission-based reverse. The final drive was a belt. The front suspension was double A-arm with anti-roll bar and had a travel of 5.67 inches with an adjustable cam. The rear suspension was swing-arm with monoshock and had a travel of 5.71 inches with an adjustable cam. The braking system was foot-actuated, fully integrated hydraulic 3-wheel system with 260mm discs 4 piston caliper at the front and a single 260mm disc 2 piston caliper at the rear. The motorcycle’s tires were 2x 165/65R14 at the front and 225/50R15 at the rear. It weighed 421 kg and had a fuel capacity of 25 liters. The seat height was 737 mm.

Technical specifications:

Make Model: BRP Can-Am Spyder RT Audio and Convenience Roadster

Year: 2010 – 11
Engine: BRP-Rotax, Four stroke, V-Twin, DPHC, 4 valve per cylinder
Capacity: 998 cc / 61 cu-in
Bore x Stroke: 97 x 68 mm
Cooling System: Liquid cooled
Compression Ratio: 10.8:1
Induction: Multi-point EFI with 57 mm diameter throttle bodies
Ignition: Electronic ignition with dual output coil
Starting: Electric
Exhaust: 2-into-1 with catalytic converter
Max Power: 106 hp / 79 kW @ 8500 rpm
Max Torque: 77 lb-ft / 104.3 Nm @ 6250 rpm
Clutch: Wet, multi-plate, manual or electronic operation through a hydraulic piston
Transmission: Sequential Manual 5-Speed (SM5) with transmission-based reverse
Final Drive: Belt
Front Suspension: Double A-Arm with anti-roll bar, .5.67 in 144 mm front suspension travel. with adjustable cam
Rear Suspension: Swing-arm with monoshock, 5.71 in 145 mm with adjustable cam rear suspension travel.
Brakes: Foot-actuated, fully integrated hydraulic 3-wheel braking system
Front Brakes: 260mm discs 4 piston caliper
Rear Brakes: Single 260mm disc 2 piston caliper
Front Tyre: 2x 165/65R14
Rear Tyre: 225/50R15
Seat Height: 737 mm / 29 in
Dry Weight: 421 kg / 929 lbs
Fuel Capacity: 25 Litres / 6.6 US gal

The post BRP Can An Spyder RT Roadster Touring (2010-11) appeared first on MotorcycleSpecifications.com.

Can-Am Spyder RS Roadster (2010-11)

admin — Sun, 02 Apr 2023 17:47:01 +0000

The Can-Am Spyder RS Roadster is a 2010-11 motorcycle with a BRP-Rotax, Four stroke, V-Twin, DPHC, 4 valve per cylinder engine with a capacity of 998 cc / 61 cu-in. It has a liquid-cooled system with a compression ratio of 10.8:1 and multi-point EFI with 57 mm diameter throttle bodies for induction. The ignition is electronic with a dual output coil, and the starting is electric. The motorcycle has a 2-into-1 exhaust with a catalytic converter, delivering a maximum power of 106 hp / 79 kW @ 8500 rpm and a maximum torque of 77 lb-ft / 104.3 Nm @ 6250 rpm.

The Clutch is Wet and multi-plate with manual or electronic operation through a hydraulic piston, and the transmission is Sequential Manual 5-Speed (SM5) with transmission-based reverse. It has a final drive with a belt and a front suspension of double A-arm with anti-roll bar and a 144 mm front suspension travel with adjustable cam. The rear suspension is a swing-arm with a monoshock and a 145 mm with adjustable cam rear suspension travel.

The brakes are foot-actuated, with a fully integrated hydraulic 3-wheel braking system, 260mm discs, and a 4-piston caliper for front brakes, and a single 260mm disc 2-piston caliper for rear brakes. The Can-Am Spyder RS Roadster has a seat height of 737mm / 29 inches, with a dry weight of 421 kg / 929 lbs and a fuel capacity of 25 Litres / 6.6 us gal.

Technical specifications:

Make Model: BRP Can Am Spyder RT Roadster

Year: 2010 – 11
Engine: BRP-Rotax, Four stroke, V-Twin, DPHC, 4 valve per cylinder
Capacity: 998 cc / 61 cu-in
Bore x Stroke: 97 x 68 mm
Cooling System: Liquid cooled
Compression Ratio: 10.8:1
Induction: Multi-point EFI with 57 mm diameter throttle bodies
Ignition: Electronic ignition with dual output coil
Starting: Electric
Exhaust: 2-into-1 with catalytic converter
Max Power: 106 hp / 79 kW @ 8500 rpm
Max Torque: 77 lb-ft / 104.3 Nm @ 6250 rpm
Clutch: Wet, multi-plate, manual or electronic operation through a hydraulic piston
Transmission: Sequential Manual 5-Speed (SM5) with transmission-based reverse
Final Drive: Belt
Front Suspension: Double A-Arm with anti-roll bar, .5.67 in 144 mm front suspension travel. with adjustable cam
Rear Suspension: Swing-arm with monoshock, 5.71 in 145 mm with adjustable cam rear suspension travel.
Brakes: Foot-actuated, fully integrated hydraulic 3-wheel braking system
Front Brakes: 260mm discs 4 piston caliper
Rear Brakes: Single 260mm disc 2 piston caliper
Front Tyre: 2x 165/65R14
Rear Tyre: 225/50R15
Seat Height: 737 mm / 29 in
Dry Weight: .421 kg / 929 lbs
Fuel Capacity: 25 Litres / 6.6 us gal

The post Can-Am Spyder RS Roadster (2010-11) appeared first on MotorcycleSpecifications.com.

Can-Am Spyder RT Roadster Limited (2010-11)

admin — Sun, 02 Apr 2023 12:56:04 +0000

The Can-Am Spyder RT Roadster Limited was manufactured between 2010 and 2011 with a 998cc / 61 cu-in capacity four-stroke V-twin engine that has a liquid cooling system and a compression ratio of 10.8:1. The motorcycle has multi-point EFI induction with 57mm diameter throttle bodies, electronic ignition with a dual output coil, and an electric start. The exhaust system is 2-into-1 with a catalytic converter.

The motorcycle has a maximum power of 106 hp / 79 kW at 8500 rpm and a maximum torque of 77 lb-ft / 104.3 Nm at 6250 rpm. The clutch is a wet, multi-plate, with manual or electronic operation through a hydraulic piston. The transmission is a Sequential Manual Five-Speed (SM5) with transmission-based reverse, and the final drive is a belt.

The motorcycle has a double A-arm front suspension with an anti-roll bar, 5.67 inches or 144 mm front suspension travel with adjustable cam. The rear suspension is a swing-arm with monoshock, 5.71 inches or 145mm with adjustable cam rear suspension travel. The brakes are foot-actuated, fully integrated hydraulic three-wheel braking system with front 260mm discs, four-piston caliper and a single 260mm disc, two-piston caliper at the rear.

The front tyre of the motorcycle has dimensions of 2x 165/65R14, and the rear tyre is 225/50R15. The seat height of the motorcycle is 737 mm / 29 in, and it has a dry weight of .421 kg / 929 lbs. The motorcycle’s fuel capacity is 25 litres / 6.6 US gal.

Technical specifications:

Make Model: BRP Can Am Spyder RT Roadster Limited

Year: 2010 – 11
Engine: BRP-Rotax, Four stroke, V-Twin, DPHC, 4 valve per cylinder
Capacity: 998 cc / 61 cu-in
Bore x Stroke: 97 x 68 mm
Cooling System: Liquid cooled
Compression Ratio: 10.8:1
Induction: Multi-point EFI with 57 mm diameter throttle bodies
Ignition: Electronic ignition with dual output coil
Starting: Electric
Exhaust: 2-into-1 with catalytic converter
Max Power: 106 hp / 79 kW @ 8500 rpm
Max Torque: 77 lb-ft / 104.3 Nm @ 6250 rpm
Clutch: Wet, multi-plate, manual or electronic operation through a hydraulic piston
Transmission: Sequential Manual 5-Speed (SM5) with transmission-based reverse
Final Drive: Belt
Front Suspension: Double A-Arm with anti-roll bar, .5.67 in 144 mm front suspension travel. with adjustable cam
Rear Suspension: Swing-arm with monoshock, 5.71 in 145 mm with adjustable cam rear suspension travel.
Brakes: Foot-actuated, fully integrated hydraulic 3-wheel braking system
Front Brakes: 260mm discs 4 piston caliper
Rear Brakes: Single 260mm disc 2 piston caliper
Front Tyre: 2x 165/65R14
Rear Tyre: 225/50R15
Seat Height: 737 mm / 29 in
Dry Weight: .421 kg / 929 lbs
Fuel Capacity: 25 Litres / 6.6 us gal

The post Can-Am Spyder RT Roadster Limited (2010-11) appeared first on MotorcycleSpecifications.com.

Kymco Xciting 250Ri (2010-11)

admin — Sun, 02 Apr 2023 09:10:19 +0000

The Kymco Xciting 250Ri is a motorcycle model produced in 2010-11. It has a liquid-cooled, four-stroke, SOHC, 4-valves engine with a capacity of 251cc. The compression ratio is 10.6:1, it uses a carburetor for induction, and has CDI ignition. The bike has an electric start and offers a maximum power of 15.4 kW at 7500 rpm, with a maximum torque of 20.9 Nm at the same speed. The transmission is automatic, and the final drive is done through a belt. The bike features a tubular steel structure frame, with a wheelbase of 1570 mm and a seat height of 770 mm. It comes with hydraulic telescopic forks at the front and hydraulic adjustable shocks at the rear. The braking system has 2x260mm discs with dual piston calipers at the front and a single 240mm disc with dual piston caliper at the rear. The front tire is 120/70 -15 and the rear tire is 150/70-14. The dry weight of the bike is 190 kg, and it has a fuel capacity of 12.5 liters.

Technical specifications:

Make Model: Kymco Xciting 250Ri

Year: 2010 – 11
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 251 cc / 15.3 cub in
Bore x Stroke: 72.7 x 60.4 mm
Compression Ratio: 10.6:1
Cooling System: Liquid cooled
Induction: Carburetor
Ignition: CDI
Starting: Electric
Max power: 15.4 kW / 20.6 hp @ 7500 rpm
Max Torque: 20.9 Nm / 2.1 kgf-m / 15.4 ft lbs @ 7500 rpm
Transmission: Automatic
Final Drive: Belt
Frame: Tubular steal structure
Wheelbase: 1570 mm / 61.8 in
Seat Height: 770 mm / 30.3 in
Front Suspension: Hydraulic telescopic forks
Rear Suspension: Hydraulic adjustable shocks
Front Brakes: 2 x 260 mm disc with dual piston calipers
Rear Brakes: Single 240mm disc with dual piston caliper
Front Tyre: 120/70 -15
Rear Tyre: 150/70 -14
Dry-Weight: 190 kg / 419 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Kymco Xciting 250Ri (2010-11) appeared first on MotorcycleSpecifications.com.

Kawasaki VN900 Classic (2010-11)

admin — Sun, 02 Apr 2023 07:09:02 +0000

The Kawasaki VN900 Vulcan Classic is a motorcycle model manufactured in 2010-11. It has a four-stroke V-twin engine with a capacity of 903cc and a liquid cooling system. The compression ratio is 9.5:1, with fuel injection of A, 34 mm x 2 with dual throttles. The maximum power of this motorcycle is 37 kW / 50 hp @ 5700 rpm, and the maximum torque is 78 Nm / 8.0 kg-fm @ 3700 rpm. The clutch is a wet multi-disc, manual, and transmission is a 5-speed gearbox. Its frame is designed with a double-cradle steel structure, with telescopic fork suspension in the front and Uni-Trak with 7-way adjustable preload in the back. The front brake system comprises a single 300mm disc 2 piston caliper, and the rear brake system comprises a single 270mm disc 2 piston caliper. It has a wheelbase of 1645 mm / 64.8 in, and the seat height is 680 mm / 26.8 in. The motorcycle carries a wet weight of 281 kg / 620 lbs and has a fuel capacity of 20 Litres / 5.3 US gal. The primary reduction ratio is 2.184 (83/38), with a final drive of the belt type. Its front and rear tyres are 130/90 -16 and 180/70 -15 respectively. The rake angle is 32 degrees, while the trail length is 160 mm / 6.3 in. The steering angle on the left and right is 38 degrees. The height of the bike is 1065 mm / 41.9 in, and the length is 2465 mm / 97.1 in, while the width is 1005 mm / 39.6 in.

Technical specifications:

Make Model: Kawasaki VN 900 Vulcan Classic

Year: 2010 – 11
Engine: Four stroke V-Twin, SOHC, 4 valve
Capacity: 903 cc / 49 cu-in
Bore x Stroke: 88.0 x 74.2 mm
Cooling System: Liquid cooled
Compression Ratio: 9.5:1
Induction: Fuel injection: ~A, 34 mm x 2 with dual throttles
Ignition: Digital
Starting: Electric
Max Power: 37 kW / 50 hp @ 5700 rpm
Max Torque: 78 Nm / 8.0 kg-fm @ 3700 rpm
Clutch: Wet multi-disc, manual
Transmission: 5 Speed
Primary Reduction Ratio: 2.184 (83/38)
Final Drive: Belt
Gear Ratio: st 2.786 (39/14) 2nd 1.889 (34/18) 3rd 1.360 (34/25) 4th 1.107 (31/28) 5th 0.963 (26/27)
Frame: Double-cradle, steel
Front Suspension: 41mm telescopic fork with 7-way preload
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Uni-Trak with 7-way adjustable preload
Rear Wheel Travel: 103 mm / 4.1 in
Front Brakes: Single 300mm disc 2 piston caliper
Rear Brakes: Single 270mm disc 2 piston caliper
Front Tyre: 130/90 -16
Rear Tyre: 180/70 -15
Rake: 32 degrees
Trail: 160 mm / 6.3 in
Steering Angle: Left 38 degrees / Right 38 degrees
Dimensions: Length 2465 mm / 97.1 in Width 1005 mm / 39.6 in Height 1065 mm / 41.9 in
Wheelbase: 1645 mm / 64.8 in
Seat Height: 680 mm / 26.8 in
Wet Weight: 281 kg / 620 lbs
Fuel Capacity: 20 Litres / 5.3 US gal.

The post Kawasaki VN900 Classic (2010-11) appeared first on MotorcycleSpecifications.com.

Honda FJS 600 Silver Wing ABS (2010-11)

admin — Sat, 01 Apr 2023 20:31:03 +0000

The Honda FJS 600 Silver Wing ABS (SW T-600GT) is a motorcycle produced between 2010 and 2011. It has a 582cc parallel-twin, liquid-cooled engine with a 10.2:1 compression ratio and a 2-into-1 exhaust. The bike has a PGM-FI induction system and a maximum power output of 50 hp at 7500 rpm and a torque of 54 Nm at 6000 rpm. The transmission is an automatic V-Matic with a final drive belt. The front suspension is a 41 mm telescopic fork while the rear suspension is a swingarm with dual shocks that are 5-position spring preload adjustable. The bike has single disc brakes at the front and rear, and the wheels have a 120/80-14 size for the front and 150/70-13 size for the rear. The fuel capacity is 16 liter or 4.2 US gal and the bike has an average consumption of 16.1 km/lit. The bike can reach a top speed of 161.2 km/h or 100 mph and can stand a quarter-mile in 15.9 seconds. It weighs 245 kg or 541 lbs and has a wheelbase of 1600 mm or 63 inches, along with a seat height of 754 mm or 27.9 inches.

Technical specifications:

Make Model: Honda FJS 600 Silver Wing / ABS (SW T-600GT)

Year: 2010-11
Engine: Four stroke, parallel twin, DOHC, 4 valves per cylinder
Capacity: 582 cc / 35.5 cub in
Bore x Stroke: 72 x 71.5 mm
Cooling System: Liquid cooled
Compression Ratio: 10.2:1
Exhaust: 2-into-1
Induction: PGM-FI with automatic enrichment circuit, 4-hole injectors
Ignition: Computer controlled fully transistorised with electronic advance
Battery: 12 Volt
Starting: Electric
Max Power: 50 hp / 36.5 kW @ 7500 rpm
Max Torque: 54 Nm / 39.8 kW @ 6000 rpm
Transmission: Automatic V-Matic
Final Drive: Belt
Front Suspension: 41 mm Telescopic fork
Front Wheel Travel: 107 mm / 4.2 in
Rear Suspension: Swingarm with dual shocks, 5-positionspring preload adjustable
Rear Wheel Travel: 114 mm / 4.5 in
Front Brakes: Single 276 mm disc 3-piston caliper
Rear Brakes: Single 240 mm disc 2-piston caliper
Front Tyre: 120/80-14
Rear Tyre: 150/70-13
Wheelbase: 1600 mm / 63 in
Seat Height: 754 mm / 27.9 in
Wet Weight: 245 kg / 541 lbs
Fuel Capacity: 16 L / 4.2 US gal
Average Consumption: 16.1 km/lit
Standing 1/4 Mile: 15.9 sec
Top Speed: 161.2 km/h / 100 mph

The post Honda FJS 600 Silver Wing ABS (2010-11) appeared first on MotorcycleSpecifications.com.

Suzuki Boulevard C109R (2010-11)

admin — Sat, 01 Apr 2023 17:28:13 +0000

The Suzuki Boulevard C109R is a motorcycle with a four-stroke, 54-degree V-twin engine with a 1786cc capacity and a bore x stroke of 112 x 90.5mm. It is liquid-cooled, with a compression ratio of 10.5:1 and semi-dry sump lubrication. It has EFI and 2 x 56 mm throttle bodies, electronic ignition, and an electric start. The bike has a maximum power of 92 kW / 123 hp at 6200 rpm and a torque of 160 Nm / 16.3 kgf-m / 118 lb.ft at 3200 rpm. The clutch is of the wet multi-plate type, with a 5-speed transmission and a shaft final drive. The front suspension is telescopic, coil spring, oil damped, and the rear suspension is a link type, coil spring, oil damped with an adjustable spring preload. The front brakes are 2 x 310 mm discs with two-piston calipers and a single 274mm disc with two-piston caliper in the rear. Both the front and rear tires are of the radial type. Its dimensions include a length of 2580 mm / 101.5 in, width of 985 mm / 38.7 in, a wheelbase of 1755 mm / 68.3 in, a seat height of 705 mm/ 27.7 in, ground clearance of 135 mm / 5.3 in, and wet weight of 380 kg / 837.7 lbs. It also has a fuel capacity of 19 L / 5.0 US gal.

Technical specifications:

Make Model: Suzuki Boulevard C109R

Year: 2010 – 11
Engine: Four stroke, 54 degrees V-Twin
Capacity: 1786 cc / 108.8 cu. in
Bore x Stroke: 112 X 90.5mm
Cooling System: Liquid cooled
Compression Ratio: 10.5:1
Lubrication: Semi-dry sump
Induction: EFI, 2 x 56 mm throttle bodies
Ignition: Electronic ignition (Transistorised)
Starting: Electric
Max Power: 92 kW / 123 hp @ 6200 rpm
Max Torque: 160 Nm / 16.3 kgf-m / 118 lb.ft @ 3200 rpm
Clutch: Wet multi-plate type
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Telescopic, coil spring, oil damped
Rear Suspension: Link type, coil spring, oil damped, adjustable spring preload
Front Brakes: 2 x 310 mm discs, 2 piston calipers
Rear Brakes: Single 274mm disc, 2 piston caliper
Front Tyre: 150/80R16
Rear Tyre: 240/55R16
Dimensions: Length 2580 mm / 101.5 in Width 985 mm / 38.7 in
Wheelbase: 1755 mm / 68.3 in
Seat Height: 705 mm / 27.7 in
Ground Clearance: 135 mm / 5.3 in
Wet Weight: 380 kg / 837.7 lbs
Fuel Capacity: 19 L / 5.0 US gal

The post Suzuki Boulevard C109R (2010-11) appeared first on MotorcycleSpecifications.com.

KTM lc4 690 Supermoto (2010-11)

admin — Sat, 01 Apr 2023 11:57:00 +0000

The KTM lc4 690 Supermoto is a versatile and powerful motorcycle built with Austrian engineering. Its lightweight chassis and agile handling make it an ideal choice for city riding or exploring winding country roads. With a liquid-cooled 4-stroke engine, it can produce up to 67 horsepower and reach speeds of up to 124 miles per hour.

The bike’s impressive performance is matched by its comfort and safety features. The adjustable suspension and ergonomic seating ensure a smooth and comfortable ride, while the Brembo brakes provide excellent stopping power. The bike also comes equipped with advanced electronics such as traction control and ride-by-wire throttle, improving its performance and handling capabilities.

The KTM lc4 690 Supermoto is also designed with durability and ease of maintenance in mind. Its robust construction and high-quality components make it a reliable choice for long-term ownership. Meanwhile, maintenance is made easy with features such as a quick-release air filter and a self-lubricating chain.

Overall, the KTM lc4 690 Supermoto is a top-tier motorcycle that is both fun and practical to ride. It appeals to riders who value performance, versatility, and advanced technology. Its sleek design, impressive specifications, and superior handling make it a highly sought-after bike in the market.

Technical specifications:

The post KTM lc4 690 Supermoto (2010-11) appeared first on MotorcycleSpecifications.com.

Harley Davidson FLSTS Heritage Springer Classic (2010-11)

admin — Sat, 01 Apr 2023 09:59:02 +0000

The Harley Davidson FLSTS Heritage Springer Classic motorcycle from 2010-11 has a four stroke, 45-degree V-Twin engine of 1584 cc/96 cu-in with pushrod-operated overhead valves and electronic sequential port fuel injection. It has a compression ratio of 9.2:1, and the maximum torque is 124.7 Nm/92 ft. lbs at 3000 rpm. The bike features a 6-speed transmission and a belt for final drive. The mild steel tubular frame of the motorcycle has stamped, cast, and forged junctions and forged fender supports, while the suspension includes a black leading link for the Springer(R) model in the front and a mild steel, round tube swingarm at the rear. The bike has 292mm disc brakes with two-piston calipers both front and rear, and a ground clearance of 124mm/4.9in. The fuel capacity of the bike is 18.9 litres/5.0 US gal, and its dry weight is 317.5 kg/700 lbs, while wet weight is 334 kg/737 lbs. The dimensions of the bike are length – 2298.70mm/90.50in, width – 967.74mm/38.10in, height – 1255mm/52.6in, wheelbase – 1638mm/64.5in, and seat height – 766.8mm when unladen and 676.3mm when laden.

Technical specifications:

Make Model: Harley Davidson FLSTSB Softail Cross Bones

Year: 2010 – 11
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.2 x 111.2 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starring: Electric
Max Torque: 124.7 Nm / 92 ft. lbs @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790
Clutch: Multi-plate with diaphragm spring in oil bath
Exhaust: Chrome, straight over / under shotgun, slash-cut with dual mufflers
Frame: Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded
Front Suspension: Front Forks Black leading link for Springer (R) model
Rear Suspension: Swingarm Mild steel, round tube sections, forged junctions; MIG welded
Front Brakes: Single 292mm disc 2 piston caliper, Rear Shocks Hidden, horizontal-mounted, coil-over
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: MT90 B16
Rear Tyre: 200/55 R17
Rake: 32 degrees
Fork Angle: 24.2 degrees
Trail: 160 mm / 6.3 in
Dimensions: Length 2298.70 mm / 90.50 in Width 967.74 mm / 38.10 in Height 1255 mm / 52.6 in
Wheelbase: 1638 mm / 64.5 in
Seat Height: Laden 676.3 mm Unladen 766.8 mm
Ground Clearance: 124 mm / 4.9 in
Dry-Weight: 317.5 kg / 700 lbs
Wet Weight: 334 kg / 737 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal

The post Harley Davidson FLSTS Heritage Springer Classic (2010-11) appeared first on MotorcycleSpecifications.com.

Yamaha XJ6 Diversion (2010-11)

admin — Sat, 01 Apr 2023 08:05:57 +0000

The Yamaha XJ6 Diversion was produced in 2010 and 2011, boasting a liquid-cooled, four-stroke engine with a transverse four cylinder and DOHC. The engine has a maximum power output of 78 hp and a maximum torque of 59.7 Nm. The motorcycle features a six-speed transmission and a wet multi-plate clutch. The bike has an aluminium die-cast, diamond-shaped frame and 43mm telescopic fork front suspension, with swingarm link-less type monocross rear suspension. The XJ6 Diversion has a front brake system with two 298 mm discs and a single 245 mm disc at the rear. The motorcycle has a front tyre dimension of 120/70 ZR17 and a rear of 160/60 ZR17. The seat height is 785mm and has a wet weight of 211 kg. The XJ6 Diversion’s fuel capacity amounts to 17.3 litres, making long rides a breeze.

Technical specifications:

Make Model: Yamaha XJ6 Diversion

Year: 2010-11
Engine: Liquid cooled, four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.
Capacity: 600
Bore x Stroke: 65.5 x 44.5 mm
Compression Ratio: 12.2:1
Induction: Group injection type fuel injection
Ignition / Starting: TCI / electric
Clutch: Wet Multi-plat disc
Max Power: 78 hp 57 kW @ 10000 rpm
Max Torque: 59.7 Nm 6.1 kgf-m @ 8500 rpm
Transmission / Drive: 6 Speed / chain
Gear Ratio: 1st 37/13 (2.846) 2nd 37/19 (1.947) 3rd 28/18 (1.556) 4th 32/24 (1.333) 5th 25/21 (1.190) 6th 26/24 (1.083)
Frame: Aluminium die-cast, diamond shaped
Front Suspension: 43mm Telescopic fork, 130mm wheel travel
Rear Suspension: Swingarm Link less type Monocross, 130mm wheel travel
Front Brakes: 2x 298 mm discs
Rear Brakes: Single 245 mm disc
Front Tyre: 120/70 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 785 mm
Wet Weight: 211 kg
Fuel Capacity: 17.3 Litres

The post Yamaha XJ6 Diversion (2010-11) appeared first on MotorcycleSpecifications.com.

Honda Shadow RS (2010-11)

admin — Sat, 01 Apr 2023 02:44:59 +0000

The Honda VT 750RS Shadow (VT 750S) motorcycle was produced for two years, from 2010 to 2011. It features a liquid-cooled, 745cc V-twin engine with a 9.6:1 compression ratio and PGM-FI electronic fuel injection, offering 43 hp of power at 5500 rpm and 60.5 Nm of torque at 3000 rpm. The bike has a wet, multi-plate clutch and five-speed transmission with O-ring-sealed chain final drive. The front suspension is a 41mm telescopic fork, with dual shocks and five-way spring-preload adjustability in the rear. The front brake is a single 296 mm disc with a two-piston caliper, while the rear brake is a 180mm drum. The motorcycle weighs 229.5 kg (507 lbs) when wet, and has a fuel capacity of 10 liters (2.8 gal). The wheelbase is 1562mm (61.5 in) and the seat height is 737mm (29.4 in). The front and rear tyres are 100/90-19 and 150/80-16, respectively. Overall, the Honda Shadow RS offers a comfortable and classic riding experience, with a powerful engine and sleek design.

Technical specifications:

Make Model: Honda VT 750RS Shadow (VT 750S )

Year: 2010-11
Engine: Four stroke, 52 degreesV-twin, SOHC. 3 valve per cylinder
Capacity: 745 cc / 45.7 cu-in
Bore x Stroke: 79 x 76 mm
Cooling System: Liquid cooled
Compression Ratio: 9.6:1
Induction: PGM-FI electronic fuel injection with automatic choke, 34mm Throttle Bore
Ignition: Solid-state with electronic advance, two spark plugs per cylinder
Starting: Electric
Max Power: 43 hp / 32.1 kW @ 5500 rpm
Max Torque: 60.5 Nm / 44 ft.-lb @ 3000 rpm
Clutch: Wet, multiplate with coil springs
Transmission: 5 Speed
Final Drive: O-ring-sealed chain
Gear Ratio: 1st 2.400 (36/15) / 2nd 1.550 (31/20) / 3rd 1.174 (27/23) / 4th 0.960 (24/25) / 5th 0.852 (23/27)
Front Suspension: 41mm Telescopic fork.
Front Wheel Travel: 129.5 mm / 5.0 in
Rear Suspension: Dual shocks 5-way spring-preload adjustability
Rear Wheel Travel: 90 mm / 3.5 in
Front Brakes: Single 296 mm disc 2 piston caliper
Rear Brakes: 180 mm Drum
Front Tyre: 100/90 -19
Rear Tyre: 150/80 -16
Wheelbase: 1562 mm / 61.5 in
Seat Height: 737 mm / 29.4 in
Wet Weight: 229.5 kg / 507 lbs
Fuel Capacity: 10 Liters / 2.8 gal

The post Honda Shadow RS (2010-11) appeared first on MotorcycleSpecifications.com.

BMW HP2 Sport Motorsport Edition (2010-11)

admin — Sat, 01 Apr 2023 01:39:02 +0000

The BMW HP2 Sport Motorsport Special Edition, manufactured between 2010-11, is a motorcycle featuring a four-stroke, two-cylinder Boxer engine with a capacity of 1170cc and a maximum power output of 96 kW/130 hp at 8750 rpm. It has a six-speed transmission and a shaft-driven final drive. The bike has a steel tube main frame and front frame, while the rear frame and front fairing are self-supporting. The front suspension is a BMW Telelever with 105mm wheel travel, while the rear suspension is a BMW Paralever with 120mm wheel travel. The front brakes have two 320mm discs, while the rear brakes have a single 265mm disc. The dimensions of the bike are 2,135 mm in length, 750 mm in width (including mirrors), and 1,163 mm in height (excluding mirrors). The wheelbase is 1485 mm and the seat height is 830 mm. The bike has a wet weight of 178 kg and a fuel capacity of 16 L/4.2 US gal. It has a top speed of 248.7 km/h/154.5 mph and can reach standing 0-100km in 3.1 seconds. The BMW HP2 Sport Motorsport Special Edition has received positive reviews from Fast Lane and Motorcycle News.

Technical specifications:

Make Model: BMW HP2 Sport Motorsport Special Edition

Year: 2010 – 11
Engine: Four stroke, two cylinder horizontally opposed Boxer air/oil-cooled, DOHC, 4 valves per cylinder
Capacity: 1170 cc / 71.5 cub. in.
Bore x Stroke: 101 x 73 mm
Cooling System: Oil/air cooled
Compression ratio: 12.5:1
Induction: BMS-K 52mm throttle butterfly
Starting: Electric
Max Power: 96 kW / 130 hp @ 8750 rpm
Max Torque: 115 Nm / 11.7 kgf-m / 85 lb-ft @ 6000 rpm
Clutch: Single-disc dry clutch ,~A180 mm
Transmission: 6 Speed
Final Drive: Shaft
Gear Ratio: 1st 2.176 / 2nd 1.625 / 3rd 1.296 / 4th 1.065 / 5th 0.939 / 6th 0.848
Frame: Main frame and front frame made of steel tube, rear frame and front fairing self-supporting CIF, self-supporting power unit
Front Suspension: BMW Telelever, 105mm wheel travels
Front Wheel Travel: 105 mm / 4.1 in
Rear Suspension: BMW Paralever, 120mm wheel travels
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2 x 320mm discs
Rear Brakes: Single 265mm disc
Front Tyre: 120/ 70 ZR17
Rear Tyre: 190/55 ZR17
Dimensions: Length: 2,135 mm / 84.1 inWidth (incl. mirrors): 750 mm / 29.5 in Height (excl. mirrors): 1,163 mm / 45.9 in
Wheelbase: 1485 mm / 58.5 in
Seat Height: 830 mm / 32.7 in
Wet-Weight: 178 kg / 392 lbs
Fuel Capacity: 16 L / 4.2 US gal
Braking 100 – 0 km/h: 39.4 m / 129.3 ft
Standing 1/4 Mile: 11.4 sec
Standing 0 – 100km: 3.1 sec
Standing 0 – 150km: 5.4 sec
Standing 0 – 200km: 9.3 sec
Acceleration 60-100 km/h: 3.8 sec
Acceleration 60-140 km/h: 7.7 sec
Acceleration 100-140 km/h: 3.9 sec
Acceleration 140-180 km/h: 4.9 sec
Top Speed: 248.7 km/h / 154.5 mph
Reviews: Fast Lane / Motorcycle News

The post BMW HP2 Sport Motorsport Edition (2010-11) appeared first on MotorcycleSpecifications.com.

Royal Enfield Bullet 350 (2010-11)

admin — Sat, 01 Apr 2023 00:52:57 +0000

The Royal Enfield Bullet Electra X is a motorcycle produced in 2010-11 with a four-stroke, single-cylinder, OHV engine and a capacity of 499cc. It has an air-cooled cooling system and a compression ratio of 8.5:1. Its electronic fuel injection (EFI) system runs on 15W50 API, SL grade, JASO MA engine oil. The bike weighs 187 kg and has a fuel capacity of 13.5 liters (3.2 US gal). It has an electronic ignition Keihin, and can produce a maximum power output of 20.3 kW / 27.2 hp at 5200 rpm and a maximum torque of 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft at 4000 rpm. The bike has a 5-speed, constant mesh transmission with a wet, multi-plate clutch and a chain final drive. The front suspension is telescopic with 130 mm wheel travel and a hydraulic damping system, while the rear suspension is a swing arm with gas shock absorbers and 80 mm wheel travel. The front brake is a single 280mm disc, and the rear brake is foot-operated with a 153 mm drum. The bike’s dimensions are 2180 mm (length), 800 mm (width), and 1080 mm (height), with a wheelbase of 1370 mm, ground clearance of 135 mm, and seat height of 800 mm. Its front and rear tyres are 90/90-19 and 100/90-19, respectively.

Technical specifications:

Make Model: Royal Enfield Bullet Electra X

Year: 2010-11
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Single 280mm disc
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 90/90 -19
Rear Tyre: 100/90 -19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 13.5 Litres / 3.2 US gal

The post Royal Enfield Bullet 350 (2010-11) appeared first on MotorcycleSpecifications.com.

Yamaha Road Star (2010-11)

admin — Fri, 31 Mar 2023 22:32:03 +0000

The Yamaha Road Star S is a powerful motorcycle model manufactured in 2010-11 with a four-stroke, 48 degrees V-Twin, OHV, 4 valves per cylinder engine and a capacity of 1670 cc / 101.9 cu/in. The bike is air-cooled, has a compression ratio of 8.4:1, and an induction of 40 mm throttle body FI. The digital TCI ignition and electric starting system make this motorcycle easy to start. The Road Star S has a maximum torque of 14.7 kgf-m / 106.3 ft-lbs. @ 2500 rpm and a 5-speed transmission. The final drive is a belt, and the frame is an aluminium double cradle. The motorcycle has a front suspension of 43mm fork and a rear suspension with adjustable link Monocross. Front and rear brakes are capable of stopping the powerful machine with front brakes of 2x 298mm discs 4 piston calipers, and rear brakes with a single 320mm disc 4 piston caliper. The bike features a front tire of 130/90-16 and a rear tire of 150/80-16. The dimensions of the motorcycle are Length 2500 mm / 98.4 in Width 980 mm / 38.6 in Height 1140 mm / 44.9 in with a Wheelbase of 1,688 mm / 66.5 in and a Seat Height of 710 mm / 28 in. The Road Star S has a Wet Weight of 337 kg / 741.4 lbs and a Fuel Capacity of 17 Liters / 3.7 US gal. Overall, the Yamaha Road Star S is a powerful and sturdy motorcycle suitable for those who enjoy the thrill of the ride.

Technical specifications:

Make Model: Yamaha XV 1700 Road Star S

Year: 2010 – 11
Engine: Four stroke, 48 degrees V-Twin, OHV, 4 valves per cylinder
Capacity: 1670 cc / 101.9 cu/in
Bore x Stroke: 97 x 113mm
Cooling System: Air cooled
Compression Ratio: 8.4:1
Induction: 40mm throttle body FI
Ignition: Digital TCI
Starting: Electric
Max Torque: 14.7 kgf-m / 106.3 ft-lbs. @ 2500 rpm
Transmission: 5 Speed
Final Drive: Belt
Frame: Aluminium, Double cradle frame
Front Suspension: 43mm fork
Rear Suspension: Adjustable link Monocross
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 320mm disc 4 piston caliper
Front Tyre: 130/90-16
Rear Tyre: 150/80-16
Dimensions: Length 2500 mm / 98.4 in Width 980 mm / 38.6 in Height 1140 mm / 44.9 in
Wheelbase: 1,688 mm / 66.5 in
Seat Height: 710 mm / 28 in
Wet Weight: 337 kg / 741.4 lbs
Fuel Capacity: 17 Liters / 3.7 US gal

The post Yamaha Road Star (2010-11) appeared first on MotorcycleSpecifications.com.

Hyosung GT 250R (2010-11)

admin — Fri, 31 Mar 2023 18:57:31 +0000

The Hyosung GT 250R FI is a four-stroke motorcycle with a 248cc capacity engine that features a 75 degrees V twin configuration, DOHC and 4 per valve cylinder. It has a compression ratio of 11.0:1 and a maximum power of 30 hp at 10500 rpm with a torque of 20.6 Nm at 7300 rpm. The motorcycle uses a Wet Multi-Plate clutch and a 5-speed transmission with a final drive of chain. It has a perimeter double cradle frame with a front suspension of 41mm oil upside-down forks and a rear suspension of swinging arm. The front and rear brakes feature single 300mm and 230mm discs, respectively. Furthermore, the motorcycle has a fuel capacity of 17 liters and a dry weight of 168 kg. The dimensions of Hyosung GT 250R FI include; length of 2060 mm, width of 655 mm and height of 1135 mm. The wheelbase is 1435 mm with a seat height of 780 mm. The front and rear tires have a size of 110/70-17 and 150/70-17, respectively. The cooling system of the motorcycle is oil/air and the induction is electronic fuel injection. The motorcycle has an electric starter and its lubrication system is wet sump. The engine oil used is semi-synthetic type with a viscosity of 10W/40.

Technical specifications:

Make Model: Hyosung GT 250R FI

Year: 2010 – 11
Engine: Four stroke, 75 degrees V twin, DOHC, 4 per valve cylinder.
Capacity: 248 cc / 15.2 cu-in
Bore x Stroke: 57 x 48.8 mm
Cooling System: Oil / Air
Engine Oil: Semi-Synthetic, 10W/40
Compression Ratio: 11.0:1
Lubrication: Wet sump
Induction: Electronic fuel Injection
Ignition: Digital CDI
Starting: Electric
Max Power: 30 hp / 22.4 kW @ 10500 rpm
Max Torque: 20.6 Nm / 2.1 kgf-m @ 7300 rpm
Clutch: Wet Multi-Plate
Transmission: 5 Speed
Final Drive: Chain
Frame: Perimeter Double Cradle
Front Suspension: 41mm Oil upside down forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swinging arm
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 300mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 110/70 -17
Rear Tyre: 150/70 -17
Dimensions: Length 2060 mm / 81.1 in Width 655 mm / 25.7 in Height 1135 mm / 44.6 in
Wheelbase: 1435 mm / 56.4 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 168 kb / 370.8 lbs
Fuel Capacity: 17 Litres / 4.4 US gal

The post Hyosung GT 250R (2010-11) appeared first on MotorcycleSpecifications.com.