2003-05 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 22:59:52 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Aprilia Tuono 125 (2003-05) https://motorcyclespecifications.com/aprilia-tuono-125-2003-05-specs/ Fri, 07 Apr 2023 05:46:58 +0000 https://motorcyclespecifications.com/?p=47895 The Aprilia Tuono 125 is a two-stroke, single cylinder motorcycle with a 125.1 cc capacity and a 12.5:1 compression ratio. It has a liquid cooling system, a ~A28 mm Dell’Orto

The post Aprilia Tuono 125 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Aprilia Tuono 125 is a two-stroke, single cylinder motorcycle with a 125.1 cc capacity and a 12.5:1 compression ratio. It has a liquid cooling system, a ~A28 mm Dell’Orto PHBH BD carburetor, and CDI ignition. The bike produces a maxim power of 10.4 Nm or 14 hp, and a maximum torque of 16.25 Nm or 12 ft-lb. It has a six-speed transmission and chain final drive. The frame is an aluminum twin spar, while the front suspension is a ~A40 mm upside-down hydraulic action telescopic fork with 120 mm or 4.7 inches of front wheel travel. The rear suspension is a cast aluminum swing-arm with asymmetrical members, a thin-walled structural shell, and a hydraulic mono-shock with adjustable spring preload. The rear wheel travel is also 120 mm or 4.7 inches. The front brakes consist of a single ~A320 mm disc and a 4-piston caliper, while the rear brakes have a single ~A220 mm disc and a 2-piston caliper. The front tire is 110/70-17, and the rear tire is 150/60-17. This motorcycle was manufactured from 2003 to 2005.

Technical specifications:

Make Model: Aprilia Tuono 125

Year: 2003 – 05
Engine: Two stroke, single cylinder
Capacity: 125.1 cc / 7.6 cu in
Bore x Stroke: 54 x 54.5 mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Induction: ~A28 mm Dell’Orto PHBH BD carburetor
Ignition: CDI
Starting: Electric
Max Power: 10.4 Nm / 14 hp
Max Torque: 16.25 Nm / 1.66 kgf-m / 12 ft-lb
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin spar
Front Suspension: ~A40 mm Upside-down hydraulic action telescopic fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Cast Aluminium swing-arm with asymmetrical members and thin walled structural shell. Hydraulic monoshock with adjustable spring preload
Rear Wheel travel: 120 mm / 4.7 in
Front Brakes: Single ~A320 mm disc, 4 piston caliper
Rear Brakes: Single ~A220 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17

The post Aprilia Tuono 125 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Kawasaki KLX250D (2003-05) https://motorcyclespecifications.com/kawasaki-klx250d-2003-05-specs/ Thu, 06 Apr 2023 23:44:59 +0000 https://motorcyclespecifications.com/?p=47567 The Kawasaki KLX 250 D-Tracker is a motorcycle manufactured from 2003 to 2005. It features a four-stroke, single-cylinder, DOHC, 4-valve engine with a capacity of 249cc. The bore and stroke

The post Kawasaki KLX250D (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Kawasaki KLX 250 D-Tracker is a motorcycle manufactured from 2003 to 2005. It features a four-stroke, single-cylinder, DOHC, 4-valve engine with a capacity of 249cc. The bore and stroke are 72mm and 61.2mm, respectively, and it has a liquid cooling system with a compression ratio of 11.0:1. Induction is provided by a Keihin CVK34 carburetor, while the ignition is a digital CDI. The motorcycle has an electric start and produces a maximum power output of 27 hp (22.3 kW) at 8,500 rpm and a maximum torque of 2.6 kgf-m (18.5 lb-ft) at 7,500 rpm. The six-speed transmission is chain-driven, and the final drive is via a chain. The front suspension features a 43 USD cartridge fork with 16-way adjustable compression damping, and the rear suspension is a Bottom-Link UNI-TRAK with a gas-charged shock, adjustable preload, 16-way rebound, and compression damping. The front brakes consist of a single 250mm disc with a 2-piston caliper, while the rear brakes have a single 230mm disc with a 1-piston caliper. The front and rear tires are 110/70-17 and 130/70-17, respectively, and the rake is 26.5 degrees with a trail of 105 mm (4.1 in). The wheelbase is 1480 mm (56.3 in), and the seat height is 880 mm (35 in). The dry weight is 116 kg (255.7 lbs), and the wet weight is 130 kg (286 lbs), with a fuel capacity of 10 liters (2.6 US gal).

Technical specifications:

Make Model: Kawasaki KLX 250 D-Tracker

Year: 2003 – 05
Engine: Four stroke, single cylinder, DOHC, 4 valve
Capacity: 249 cc / 15.2 cu-in
Bore x Stroke: 72 61.2 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Induction: Keihin CVK34 carburetor
Ignition: Digital CDI
Starting: Electric
Max Power: 27 hp / 22.3 kW @ 8500 rpm
Max Power Rear Tyre: 23.5 hp @ 8200 rpm
Max Torque: 2.6 kgf-m / 18.5 lb-ft @ 7500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 43 USD cartridge fork with 16-way adjustable compression damping
Rear Wheel Travel: 285 mm / 11.2 in
Rear Suspension: Bottom-Link UNI-TRAK with gas-charged shock, adjustable preload, 16-way rebound and compression damping
Rear Wheel Travel: 280 mm / 11.0 in
Front Brakes: Single 250mm disc 2 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70- 17
Rear Tyre: 130/70- 17
Rake: 26.5 degrees
Trail: 105 mm / 4.1 in
Wheelbase: 1480 mm / 56.3 in.
Seat Height: 880 mm / 35 in
Dry Weight: 116 kg / 255.7 lbs
Wet Weight: 130 kg / 286 lbs
Fuel Capacity: 10 Litres / 2.6 US gal

The post Kawasaki KLX250D (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Kawasaki KDX220SR (2003-05) https://motorcyclespecifications.com/kawasaki-kdx220sr-2003-05-specs/ Thu, 06 Apr 2023 23:41:00 +0000 https://motorcyclespecifications.com/?p=47563 The Kawasaki KDX220SR is a two-stroke, single cylinder, reed valve bike with a 216cc capacity and 6-speed transmission. It has an electronic CDI ignition and a PWK33 Keihin PWK35 carburetor.

The post Kawasaki KDX220SR (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Kawasaki KDX220SR is a two-stroke, single cylinder, reed valve bike with a 216cc capacity and 6-speed transmission. It has an electronic CDI ignition and a PWK33 Keihin PWK35 carburetor. The bike has a maximum power of 37 kg and 27.5 kW at 8000 rpm and a maximum torque of 3.5 kgf-m at 7000 rpm. It has a high-tensile steel perimeter frame, front suspension of a 43mm conventional cartridge fork, and UNI-TRAK (R) single-shock system on the rear. Braking is handled by a single 250mm disc and 2 piston caliper on the front and a single 230mm disc and 1 piston caliper on the rear. The bike has front and rear tires measuring 3.00-21 and 4.60-18 respectively, a height of 1229 mm, width of 889mm, wheelbase of 1435mm, and seat height of 919mm. The ground clearance is 340mm, dry weight is 101.0kg, and the fuel capacity is 11 litres. The Kawasaki KDX220SR is known for its versatility and agility in various terrains. It is great for off-road riding and can easily maneuver through tight spaces. Overall, it is a reliable and durable bike that can handle many different types of rides.

Technical specifications:

Make Model: Kawasaki KDX 220R

Year: 2003 – 05
Engine: Two stroke, single cylinder, reed valve
Capacity: 216 cc / 13.1 cu-in
Bore x Stroke: 9 58 mm
Cooling System: Liquid cooled
Compression Ratio: 9.3:1
Induction: PWK33 Keihin PWK35 carburetor
Ignition: Electronic CDI
Starting: Electric
Max Power: 37 kg / 27.5 kW @ 8000 rpm
Max Torque: 3.5 kgf-m @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: High-tensile steel perimeter design
Front Suspension: 43mm conventional cartridge fork
Rear Suspension: UNI-TRAK (R) single-shock system
Front Brakes: Single 250mm disc 2 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 3.00-21
Rear Tyre: 4.60-18
Rake: 26.5 degrees
Dimensions: Height 1229 mm / 48.4 in Width 889 mm / 35.0 in
Wheelbase: 1435 mm / 56.5 in
Seat Height: 919 mm / 36.2 in If adjustable, lowest setting
Ground Clearance: 340 mm / 13.4 in
Dry Weight: 101.0 kg / 222.6
Fuel Capacity: 11 Litres / 2.9 US gal

The post Kawasaki KDX220SR (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Highland 950 V2 Outback (2003-05) https://motorcyclespecifications.com/highland-950-v2-outback-2003-05-specs/ Thu, 06 Apr 2023 11:24:02 +0000 https://motorcyclespecifications.com/?p=46898 The Highland 950 V2 Outback motorcycle was manufactured between 2003 and 2005. It has a four stroke, 60 degrees V-Twin engine with a capacity of 936 cc. The engine features

The post Highland 950 V2 Outback (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Highland 950 V2 Outback motorcycle was manufactured between 2003 and 2005. It has a four stroke, 60 degrees V-Twin engine with a capacity of 936 cc. The engine features DOHC, 4 valves per cylinder, fuel injection and an integrated engine management system with ignition coils fitted directly on the spark plugs. The bike generates a maximum power of 85 hp at 6000 rpm and maximum torque of 104Nm at 4700 rpm. The bike has a lubricated multi-disc clutch and a six-speed transmission with a final drive chain. The frame of the bike is made of rectangular section, CrMo steel and aluminium, while the front suspension comprises a 50mm WP that is adjustable for compression and rebound with 280mm wheel travel. The rear suspension is a WP with adjustable stiffness, compression, and rebound and 300mm wheel travel. The bike has a front single 300mm disc with 2 piston calipers brake and the rear brakes are single 220mm disc with 1 piston calipers. The bike has a wheelbase of 1530mm, a seat height of 910mm, and ground clearance of 300mm with a dry weight of 165 kgs. The bike has a fuel capacity of 5.2 US gal (20 liters), while the front and rear tires respectively measure 90/90-21 and 150/70-18.

Technical specifications:

Make Model: Highland 950 V2 Outback

Year: 2003 – 05
Engine: Four stroke, 60 degrees V-Twin, DOHC, 4 valves per cylinder
Capacity: 936 cc / 57.1 cu-in
Bore x Stroke: 95 x 96 mm
Cooling System: Liquid cooled
Compression Ratio: 10.0:1
Induction: Fuel injection
Ignition: Integrated engine management system with ignition coils fitted directly on the spark plugs
Starting: Electric
Max Power: 85 hp / 62 kW @ 6000 rpm
Max Torque: 104 Nm / 76.7 lb-ft @ 4700 rpm
Clutch: lubricated mult disk clutch
Transmission: 6 Speed
Final Drive: Chain
Frame: Rectangular section, CrMo steel and aluminium
Front Suspension: 50mm WP, adjustable compression and rebound
Front Wheel Travel: 280 mm / 11.0 in
Rear Suspension: WP, adjustable stiffness, compression and rebound
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 300mm disc 2 piston calipers
Rear Brakes: Single 220mm disc 1 piston calipers
Front Tyre: 90/90-21
Rear Tyre: 150/70 -18
Wheelbase: 1530 mm / 60.2 in
Seat Height: 910 mm / 35.8 in
Ground Clearance: 300 mm / 11.8 in
Dry Weight: 165.0 kg / 363.8 lbs
Fuel Capacity: 20 Litres / 5.2 US gal

The post Highland 950 V2 Outback (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Cagiva V Raptor (2003-05) https://motorcyclespecifications.com/cagiva-v-raptor-2003-05-specs/ Tue, 04 Apr 2023 20:08:57 +0000 https://motorcyclespecifications.com/?p=44750 The Cagiva V-Raptor 1000 was produced from 2003-2005 and had a four-stroke, 90-degree V-twin engine with a capacity of 996cc. The engine had electronic fuel injection and produced a maximum

The post Cagiva V Raptor (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva V-Raptor 1000 was produced from 2003-2005 and had a four-stroke, 90-degree V-twin engine with a capacity of 996cc. The engine had electronic fuel injection and produced a maximum power of 105.5 kW at 8500 rpm and a maximum torque of 90 Nm at 7000 rpm. The motorcycle had a six-speed transmission and a final drive chain. The front suspension was a 43mm upside-down hydraulic fork and the rear suspension was a rising rate mono-shock, both of which were adjustable. The front brakes consisted of 2x 298mm discs with 4-piston calipers, and the rear brake was a single 220mm disc with a 2-piston caliper. The bike had a wheelbase of 1440mm and a seat height of 770mm. The dry weight was 197kg and the fuel capacity was 15.2 litres. The consumption average was 16.6 km/lit and the top speed was 232 km/h. It could complete the standing quarter-mile in 11.1 seconds at a speed of 208 km/h.

Technical specifications:

Make Model: Cagiva V-Raptor 1000

Year: 2003 – 05
Engine: Four stroke, 90 degrees V-twin, DOHC, 4 valves per cylinder (Suzuki DL100)
Capacity: 996 cc / 60.7 cu-in
Bore x Stroke: 11.3:1
Compression Ratio: 99 x 66 mm
Cooloing System: Liquid cooled
Induction: Electronic fuel injection
Ignition: CDI
Starting: Electric
Max Power: 105.5 / 78.7 kW @ 8500 rpm
Max Torque: 90 Nm / 66.4 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 43mm Upside down hydraulic fork
Rear Suspension: Rising rate monoshock preload adjustable
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1440 mm / 56.7 in
Seat Height: 770 mm / 30.3 in
Dry Weight: 197 kg / 434 lbs
Fuel Capacity: 15.2 Litres / 4.0 US gal
Consumption Average: 16.6 km/lit
Standing 1/4 Mile: 11.1 sec / 208 km/h
Top Speed: 232 km/h

The post Cagiva V Raptor (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GZ 125 Marauder (2003-05) https://motorcyclespecifications.com/suzuki-gz-125-marauder-2003-05-specs/ Tue, 04 Apr 2023 15:08:04 +0000 https://motorcyclespecifications.com/?p=44470 The Suzuki GZ 125 Marauder was made between 2003 and 2005. It has a four-stroke, single-cylinder, OHC, 2 valve engine with a capacity of 124cc. The bore x stroke measures

The post Suzuki GZ 125 Marauder (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GZ 125 Marauder was made between 2003 and 2005. It has a four-stroke, single-cylinder, OHC, 2 valve engine with a capacity of 124cc. The bore x stroke measures 57 x 48.8 mm and has a compression ratio of 9.5:1. The bike is air-cooled and has a carburetor induction system, with an electric start. It produces a maximum power of 8.7 kW/12 hp at 9800 rpm and a maximum torque of 8.7 Nm/0.9 kgf/m/6.4 lb-ft at 9500 rpm. The bike has a six-speed transmission with a chain final drive. The front suspension consists of telescopic forks with a front wheel travel of 120 mm/4.7 in. The rear suspension features a swingarm, twin shock absorber, and adjustable spring preload with a rear wheel travel of 90 mm/3.5 in. The front brake is a single 275mm disc while the rear brake is a 130mm drum. The front tire is a 110/80-16 while the rear tire is a 130/90-15. The seat height is 685 mm/27.0 in and the dry weight is 137 kg/302 lbs. The fuel capacity is 14 liters/3.7 US gal/3.1 Imp gal. Overall, the Suzuki GZ 125 Marauder is a classic motorcycle that has a lightweight design and is easy to handle.

Technical specifications:

Make Model: Suzuki GZ 125 Marauder

Year: 2003 – 05
Engine: Four stroke, single cylinder, OHC, 2 valves
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 57 x 48.8 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Induction: Carburetor
Starting: Electric
Max Power: 8.7 kW / 12 hp @ 9800 rpm
Max Torque: 8.7 Nm / 0.9 kgf/m / 6.4 lb-ft @ 9500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swingarm, twin shock absorber, adjustable spring preload
Rear Wheel Travel: 90 mm / 3.5 in
Front Brakes: Single 275 mm disc
Rear Brakes: 130 mm Drum
Front Tyre: 110/80-16
Rear Tyre: 130/90-15
Seat Height: 685 mm / 27.0 in
Dry Weight: 137 kg / 302 lbs
Fuel Capacity: 14 Litres / 3.7 US gal / 3.1 Imp gal
Overview: Motorcycle News

The post Suzuki GZ 125 Marauder (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Maico Enduro 380 (2003-05) https://motorcyclespecifications.com/maico-enduro-380-2003-05-specs/ Tue, 04 Apr 2023 06:39:02 +0000 https://motorcyclespecifications.com/?p=44000 The Maico Enduro 380 was produced from 2003 to 2005 and features a single cylinder, two-stroke engine with a capacity of 369cc. It has a liquid cooling system and a

The post Maico Enduro 380 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Maico Enduro 380 was produced from 2003 to 2005 and features a single cylinder, two-stroke engine with a capacity of 369cc. It has a liquid cooling system and a Bing 40 oval fuel system, with ignition provided by a 12V 130W SEM. The bike has a kick start and produces a maximum power of 44.7 kW or 60 horsepower. It features a chromolybdenum frame, WP 48 front suspension, and MAICO twin-link Reiger shock rear suspension. The front brake is a single disc with a 260mm diameter and a 2-piston caliper, while the rear brake is a single disc with a 220mm diameter and a 1-piston caliper. The Maico Enduro 380 has alloy wheels with wire spokes, and the front rim measures 1.6 x 21 inches, while the rear rim measures 2.15 x 18 inches. The bike has a wheelbase of 1480mm and a ground clearance of 388mm, with a seat height of 960mm. The dry weight is 109kg, and the fuel capacity is 9.5 liters or 2.5 US gallons.

Technical specifications:

Make Model: Maico Enduro 380

Year: 2003 – 05
Engine: Single cylinder, two stroke
Capacity: 369 cc / 22.5 cub in
Bore x Stroke: 82 x 70 mm
Cooling System: Liquid cooled
Fuel System: Bing 40 oval
Ignition: 12V 130W SEM
Starting: Kick
Max Power: 44.7 kW / 60 hp
Clutch: Wet, multi-plate
Transmission: 5-Speed
Final Drive: Chain
Frame: Chrom Molybd~An Rohr
Front Suspension: WP 48
Front Wheel Travel: 305 mm / 12.0 in.
Rear Suspension: MAICO Twin link Reiger shock
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single disc, 260 mm, 2-piston caliper
Rear Brakes: Single disc, 220 mm , 1-piston caliper
Wheels: Alloy, wire spokes
Front Rim: 1.6 x 21 in.
Rear Rim: 2.15 x 18 in.
Front Tyre: 90/90-21
Rear Tyre: 140/80-18
Wheelbase: 1480 mm / 58.3 in.
Ground Clearance: 388 mm / 15.3 in.
Seat Height: 960 mm / 37.8 in.
Dry Weight: 109 kg / 240 lbs
Fuel Capacity: 9.5 L / 2.5 US gal

The post Maico Enduro 380 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Victory Vegas (2003-05) https://motorcyclespecifications.com/victory-vegas-2003-05-specs/ Tue, 04 Apr 2023 02:04:56 +0000 https://motorcyclespecifications.com/?p=43745 The Victory Vegas, produced between 2003 and 2005, is a four-stroke, 1507cc motorcycle with a 50-degree V twin SOHC engine. It has four valves per cylinder, self-adjusting cam chains, and

The post Victory Vegas (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Victory Vegas, produced between 2003 and 2005, is a four-stroke, 1507cc motorcycle with a 50-degree V twin SOHC engine. It has four valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The bike is air and oil-cooled, and has a compression ratio of 9.2:1. Control is provided via electronic fuel injection and 44mm throttle bodies. A carbon fiber reinforced belt delivers power to the rear wheel, the bike has an electric starter and a five-speed transmission. The bike’s front suspension is a 43mm telescopic fork with 130mm wheel travel, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage having 100mm wheel travel, a preload adjustable spring. Front and rear brakes are single, floating 300mm rotors, with 4 piston and 2 piston calipers respectively. The wheels are fitted with 80/90-21 and 180/55-B18 front and rear tires. The bike has a dry weight of 280 kilograms (617 pounds) and a fuel capacity of 17 liters (4.5 US gallons).

Technical specifications:

Make Model: Victory Vegas

Year: 2003 – 05
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1507 cc / 91.9 cu-in
Bore x Stroke: 97 x 102 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.2:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Transmission: 5 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Conventional telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90-21
Rear Tyre: 180/55-B18
Dry Weight: 280 kg / 617 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Vegas (2003-05) appeared first on MotorcycleSpecifications.com.

]]> BMW R1200C Montauk (2003-05) https://motorcyclespecifications.com/bmw-r1200c-montauk-2003-05-specs/ Tue, 04 Apr 2023 01:05:00 +0000 https://motorcyclespecifications.com/?p=43691 The BMW R 1200C Montauk is a motorcycle produced between 2003 to 2005. It has a four-stroke, two-cylinder horizontally opposed Boxer engine with a capacity of 1170cc and a compression

The post BMW R1200C Montauk (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The BMW R 1200C Montauk is a motorcycle produced between 2003 to 2005. It has a four-stroke, two-cylinder horizontally opposed Boxer engine with a capacity of 1170cc and a compression ratio of 10.0:1. The bike has Bosch Motronic MA 2.4 fuel injection and a 14V 50 Amp Alternator charging system. Its ignition is a digital CDI Bosch Electronic, and it has a wet sump lubrication system. The bike has a maximum power output of 44.5 kW/61 hp at 5000 rpm and a maximum torque output of 98 Nm/72.27 lb-ft at 3000 rpm. The bike has a dry weight of 236 kg and a wet weight of 255 kg. The BMW R1200C Montauk has a three-section composite frame consisting of a front and rear section, with a load-bearing engine. It also features a Motorrad Telelever suspension system in the front and a die-cast aluminum single-sided swinging arm with BMW Motorrad Monolever rear suspension. The bike has 2 x 305mm front discs and a single 285mm rear disc for braking. It has a top speed of 178.1 km/h and consumes 5.9 L/100 km on average. The bike has a fuel capacity of 17.5 liters and has a Power-to-weight ratio of 0.14 hp/kg. Additionally, the bike has a standing 1/4 mile time of 13.8 seconds at 151.5km/h.

Technical specifications:

Make Model: BMW R 1200C Montauk

Year: 2003 – 05
Engine: Four stroke, two cylinder horizontally opposed Boxer, 4 valves per cylinder
Capacity: 1170 cc / 71.4 cu in.
Bore x Stroke: 101 x 73mm
Cooling System: Air/Oil cooled
Compression Ratio: 10.0:1
Lubrication: Wet sump
Induction: Bosch Motronic MA 2.4 Fuel injection
Ignition: Digital CDI Bosch Electronic
Charging System: 14 V 50 Amp Alternator (700 W)
Battery: BMW Mareg, 19.5 Amp/h low maintenance
Starting: Electric
Max Power: 44.5 kW / 61 hp @ 5000 rpm
Power-to-weight ratio: 0.14 hp/kg / 6.92 kg/hp
Max Torque: 98 Nm / 10.0 kgf-m / 72.27 lb-ft @ 3000 rpm
Clutch: Dry, single plate, hydraulic operated
Transmission: 5 Speed
Final Drive: Shaft
Gear Ratio: 1st 2.045 / 2nd 1.600 / 3rd 1.267 / 4th 1.038 / 5th 0.800:1
Frame: Three section composite frame consisting of front & rear section, load bearing engine
Front Suspension: Motorrad Telelever, stanchion 35mm, central strut
Front Wheel Travel: 145 mm / 5.7 in
Rear Suspension: Die cast aluminium single sided swinging arm with BMW Motorrad Monolever, WAD strut (travel related damping), spring preload adjustable to continuously variable levels by means of hydraulic handwheel.
Rear Wheel Travel: 110 mm / 4.3 in
Front Brakes: 2 x 305mm discs, 4 piston calipers
Rear Brakes: Single 285mm disc, 2 piston caliper
Front wheel: 2.50 x 18, three spoke alloy
Rear wheel: 4.00 x 15, three spoke alloy
Front Tyre: 100/90-18
Rear Tyre: 170/80-15
Trail: 86 mm / 3.4 in
Dimensions: Length 2340 mm / 92.1 in Width 1050 mm / 44.3 in Height 1130 mm / 44.4 in
Wheelbase: 1650 mm / 64.9 in
Seat Height: 740 mm / 29.1 in
Ground Clearance: 172 mm / 6.77 in
Dry Weight: 236 kg / 482 lbs
Wet Weight: 255 kg / 565 lbs
Fuel Capacity: 17.5 Litres / 4.5 gal
Consumption Average: 5.9 L/100 km / 17.0 km/l / 40 US mpg
Braking 60 km/h – 0: 13.2 m / 43.3 ft
Braking 100 km/h – 0: 40.1 m / 131.6 ft
Standing 1/4 Mile: 13.8 sec / 151.5 km/h / 94.1 mph
Top Speed: 178.1 km/h / 110.7 mph

The post BMW R1200C Montauk (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Honda VTX1300C (2003-05) https://motorcyclespecifications.com/honda-vtx1300c-2003-05-specs-2/ Mon, 03 Apr 2023 00:10:01 +0000 https://motorcyclespecifications.com/?p=42314 The Honda VTX1300C was a powerful motorcycle that was manufactured from 2003 to 2005. Equipped with a four stroke V-twin engine, SOHC, and a capacity of 1312 cc, this bike

The post Honda VTX1300C (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Honda VTX1300C was a powerful motorcycle that was manufactured from 2003 to 2005. Equipped with a four stroke V-twin engine, SOHC, and a capacity of 1312 cc, this bike boasted a maximum power of 74 hp at 5,000 rpm and a maximum torque of 123 Nm at 3,000 rpm. It also had a compression ratio of 9.2:1 and a wet sump lubrication system.

The VTX1300C had a steel, double cradle frame and a front suspension with a 41mm telescopic fork and a rear suspension with dual shocks with five-position spring preload adjustability. The bike had a five-speed transmission, cable-operated wet multiple discs clutch, and a shaft final drive.

The bike’s front wheel had a travel of 130 mm, while the rear wheel had a travel of 91 mm. It also had a single 336mm disc 2-piston caliper front brake and a single 296mm disc 1-piston caliper rear brake. The wheels had a 32.4-degree rake and a trail of 144mm/5.7 in. The wheelbase was 1668.7 mm/65.7 in, and the bike had a seat height of 693 mm/27.3 in.

The Honda VTX1300C came with a 140/80-17 front tire and a 170/80-15 rear tire. It weighed 303 kg/669 lbs and could hold up to 18 liters/4.8 US gallon of fuel. Overall, the VTX1300C was a popular motorcycle with great features and impressive performance capabilities.

Technical specifications:

Make Model: Honda VTX 1300R

Year: 2003-05
Engine: Four stroke, 52 degreesV-twin, SOHC,
Capacity: 1312 cc / 80 cu-in
Bore x Stroke: 89.5 x 104.3 mm
Cooling System: Liquid cooled
Compression Ratio: 9.2:1
Lubrication: Wet sump
Induction: Single 38mm constant-velocity carburetor
Ignition: Solid-state digital
Stgarting: Electric
Max Power: 74 hp / 55kW @ 5.000rpm
Max Torque: 123 Nm / 90.7 lb-ft @ 3.000rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Shaft
Frame: Steel, Double cradle frame
Front Suspension: 41mm telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Dual shocks with five-position spring preload adjustability
Rear Wheel Travel: 91 mm / 3.5 in
Front Brakes: Single 336mm disc 2 piston caliper
Rear Brakes: Single 296mm disc 1 piston caliper
Front Tyre: 140/80-17
Rear Tyre: 170/80-15
Rake: 32.4 degrees
Trail: 144mm / 5.7 in
Wheelbase: 1668.7 mm / 65.7 in
Seat Height: 693 mm / 27.3 in
Dry Weight: 303 kg / 669 lbs
Fuel Capacity: 18 Litres / 4.8 US gal

The post Honda VTX1300C (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Yamaha YZF 600R Thunder cat (2003-05) https://motorcyclespecifications.com/yamaha-yzf-600r-thunder-cat-2003-05-specs/ Sun, 02 Apr 2023 07:41:07 +0000 https://motorcyclespecifications.com/?p=41397 The Yamaha YZF 600R Thundercat was a sport motorcycle produced between 2003 and 2005. It was powered by a liquid-cooled, four-stroke, transverse four-cylinder engine with a displacement of 599cc and

The post Yamaha YZF 600R Thunder cat (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Yamaha YZF 600R Thundercat was a sport motorcycle produced between 2003 and 2005. It was powered by a liquid-cooled, four-stroke, transverse four-cylinder engine with a displacement of 599cc and a compression ratio of 12.0:1. The engine delivered a maximum power of 72.9 kW (100 hp) at 11,500 rpm and a peak torque of 65.7 Nm (48.7 lb-ft) at 9,500 rpm. The bike also featured a six-speed transmission and a 530 O-ring chain final drive. The frame was a twin-spar, steel delta box design, while the suspension consisted of a 41mm telescopic fork at the front and a monoshock at the rear. The bike had a 25-degree rake and a trail of 97 mm. The front brake system comprised of two 300 mm discs with 4-piston calipers, while the rear featured a single 245 mm disc with a 2-piston caliper. The bike had a length of 2060mm (81.1 in), a width of 754mm (29.6 in) and a height of 1190mm (46.8 in). It had a seat height of 810mm (31.7 in), a ground clearance of 135 mm (5.3 in), and a dry weight of 189kg (417 lbs). The fuel tank capacity was 19 litres (5.0 US gal / 4.2 Imp gal) and the bike had a fuel consumption of 6.1 L/100 km (16.4 km/l / 38.6 US mpg / 46.3 Imp mpg). The bike had a top speed of 246.8 km/h (153.3 mph) and could go from 0 to 100 km/h in 3.3 seconds. The Yamaha YZF 600R Thundercat offered good performance and an enjoyable riding experience.

Technical specifications:

Make Model: Yamaha YZF 600R Thundercat

Year: 2003 – 05
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 599 cc / 36.5 cu-in
Bore x Stroke: 62 x 49.6 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Induction: 4 x 36 mm Keihin CV downdraft carburetors
Ignition: Digital TCI
Starting: Electric
Max Power: 72.9 kW / 100 hp @ 11500 rpm
Max Power Rear Tyre: 67.9 kW / 91.0 hp @ 11500 rpm
Max Torque: 65.7 Nm / 6.7 kgf-m / 48.7 lb-ft @ 9500 rpm
Transmission: 6 Speed
Final Drive: 530 O-ring chain OEM sprocket sizes per tooth Front= 15 Back= 47
Frame: Twin spar, steel, delta box
Front Suspension: 41 mm telescopic fork adjustable preload, compression and rebound damping
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Monoshock adjustable preload, bump and rebound
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 300 mm Discs, 4 piston calipers
Rear Brakes: Single 245mm disc, 2 piston caliper
Front Tyre: 120/60-17
Rear Tyre: 160/60-17
Rake: 25.0 degrees
Trail: 97 mm / 3.82 in
Dimensions: Length 2060mm / 81.1 in Width 754 mm / 29.6 in Height 1190 mm / 46.8 in
Wheelbase: 1415 mm / 55.7 in
Seat Height: 810 mm / 31.7 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 189 kg / 417 lbs
Wet Weight: 210 kg / 463 lbs
Fuel Capacity: 19 Litres / 5.0 US gal / 4.2 Imp gal
Consumption Average: 6.1 L/100 km / 16.4 km/l / 38.6 US mpg / 46.3 Imp mpg
Braking 60 km/h – 0: 13.5 m / 44.3 ft
Braking 100 km/h – 0: 37.5 m / 123 ft
Standing 1/4 Mile: 11.3 sec / 194.7 km/h / 121 mph
Top Speed: 246.8 km/h / 153.3 mph

The post Yamaha YZF 600R Thunder cat (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Aprilia Scarabeo 500 (2003-05) https://motorcyclespecifications.com/aprilia-scarabeo-500-2003-05-specs/ Sat, 01 Apr 2023 10:05:08 +0000 https://motorcyclespecifications.com/?p=40200 The Aprilia Scarabeo 500 motorcycle was manufactured from 2003 to 2005. It features a four-stroke, single cylinder, SOHC, 4-valve engine with a capacity of 460cc. The engine is liquid-cooled and

The post Aprilia Scarabeo 500 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Aprilia Scarabeo 500 motorcycle was manufactured from 2003 to 2005. It features a four-stroke, single cylinder, SOHC, 4-valve engine with a capacity of 460cc. The engine is liquid-cooled and has a compression ratio of 10.5:1. It uses a Keihin carburetor and NGK CR7EKB spark plug with an electronic ignition and an electric starting system. The maximum power output is 29kW/39hp @7250rpm, while the maximum torque is 41Nm/4.7kgf-m/30.2lb-ft @5500rpm. The clutch is automatic and centrifugal, and the transmission is automatic with a continuous variator. The belt final drive moves the motorcycle.

The front suspension has a hydraulic fork with a sleeve of approximately 40mm and provides 100mm/3.9in of wheel travel. On the other hand, the rear suspension has a swinging fork swingarm, which is linked to the frame by dual connecting rods and two radial silent blocks. Moreover, there are two double-action gas shock absorbers with preload adjustment, offering 110mm/4.3in of rear-wheel travel. Lastly, the front brakes consist of 2 x 260mm discs with 2-piston calipers. This motorcycle oil capacity is 1.8 liters with a fuel tank capacity of 14.5 liters. It has a dry weight of 198 kg and seat height of 770 mm.

Technical specifications:

Make Model: Aprilia Scarabeo 500

Year: 2003 – 05
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 460 cc / 28.1 cu in
Bore x Stroke: 92 x 69 mm
Compression Ratio: 10.5:1
Cooling System: Liquid cooled
Lubrication: Wet sump, forced circulation with mechanical pump
Engine Oil: Semi-synthetic, 5W/40
Induction: Keihin carburetor
Spark Plug: NGK CR7EKB
Ignition: Electronic
Starting: Electric
Max Power: 29 kW / 39 hp @ 7250 rpm
Max Torque: 41 Nm / 4.7 kgf-m / 30.2 lb-ft @ 5500 rpm
Clutch: Automatic, centrifugal
Transmission: Automatic with continuous variator
Final Drive: Belt
Front Suspension: Hydraulic fork, sleeve ~A40 mm.
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Engine functions as swinging fork swingarm, linked to the frame by dual connecting rods and two radial silent blocks. Two double-action gas shock absorbers with preload adjustment.
Rear Wheel Travel: 110 mm / 4.3 in
Front Brakes: 2 x ~A260 mm discs, 2 piston calipers

The post Aprilia Scarabeo 500 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Yamaha XV250S Virago (2003-05) https://motorcyclespecifications.com/yamaha-xv250s-virago-2003-05-specs/ Sat, 01 Apr 2023 00:49:01 +0000 https://motorcyclespecifications.com/?p=39682 The Yamaha XV250S Virago motorcycle was produced between 2003 and 2005. It has a four-stroke, V-twin cylinder, SOHC engine with a capacity of 249cc and a compression ratio of 10.0:1.

The post Yamaha XV250S Virago (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Yamaha XV250S Virago motorcycle was produced between 2003 and 2005. It has a four-stroke, V-twin cylinder, SOHC engine with a capacity of 249cc and a compression ratio of 10.0:1. The BDS26 Mikuni carburetor is used for induction and the ignition is CDI. The bike is capable of generating 23 hp / 17.1 Kw @ 8000 rpm max power and has a maximum torque of 2.2 kgf-m / 15.9 lb-ft @ 6000 rpm. The transmission is five-speed with a final drive of a chain. The bike has a telescopic front fork suspension with front wheel travel of 140 mm / 5.5 in and dual rear shocks with a rear wheel travel of 100 mm / 3.9 in. The front brakes consist of a single 282mm disc while the rear has a 130mm drum. The bike has a seat height of 685 mm / 27.0 in and a ground clearance of 145 mm / 4.7 in, with a dry weight of 137 kg / 302 lbs and a wet weight of 145 kg / 319.6 lbs. The fuel capacity is 9.5 liters / 2.5 US gal and the average consumption is 23 km/lit. The bike has a braking distance of 14.9 m / 42.6 m and can reach a top speed of 136.2 km/h.

Technical specifications:

Make Model: Yamaha XV 250 Virago

Year: 2003 – 05
Engine: Four stroke, V-Twin cylinder, SOHC, 2 valve per cylinder
Capacity: 249 cc / 15.2 cu-in
Bore x Stroke: 49 x 66 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: BDS26 Mikuni carburetor
Ignition: CDI
Starting: Electric
Max Power: 23 hp / 17.1 Kw @ 8000 rpm
Max Power Rear Tyre: 20.8 hp @ 8000 rpm
Max Torque: 2.2 kgf-m / 15.9 lb-ft @ 6000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Front Wheel Travel: 140 mm / 5.5 in
Frame: Camshaft Valvetrain Configuration
Rear Suspension: Dual shocks
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 282mm disc
Rear Brakes: 130mm drum
Front Tyre: 3.00-19
Rear Tyre: 130/90-15
Wheelbase: 1495 mm / 58.9 in
Seat Height: 685 mm / 27.0 in
Ground Clearance: 145 mm / 4.7 in
Dry Weight: 137 kg / 302 lbs
Wet Weight: 145 kg / 319.6 lbs
Fuel Capacity: 9.5 Liters / 2.5 US gal
Consumption Average: 23 km/lit
Braking 60 – 0 / 100 – 0: 14.9 m / 42.6 m
Standing 1/4 Mile: 17.0 sec / 120.8 km/h
Top Speed: 136.2 km/h

The post Yamaha XV250S Virago (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Maico Cross 380 (2003-05) https://motorcyclespecifications.com/maico-cross-380-2003-05-specs/ Fri, 31 Mar 2023 11:00:56 +0000 https://motorcyclespecifications.com/?p=38927 The Maico Cross 380 is a two-stroke, single-cylinder motorcycle produced between 2003-2005. It has a 369cc capacity and a liquid-cooled system with a Mikuni TMX 38 fuel system. It features

The post Maico Cross 380 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Maico Cross 380 is a two-stroke, single-cylinder motorcycle produced between 2003-2005. It has a 369cc capacity and a liquid-cooled system with a Mikuni TMX 38 fuel system. It features a PVL digital ignition and a wet, multi-plate clutch with a 5-speed transmission and chain final drive. Its frame is made of chrome molybdenum and has a WP 48 front suspension with 305mm of front wheel travel and a MAICO Twin Link Reiger shock with 320mm of rear wheel travel. It has a single disc, 2-piston caliper front brake, and a single disc, 1-piston caliper rear brake, with alloy wheels and wire spokes. The front and rear tires are 90/90-21 and 120/90-19 respectively, with a wheelbase of 1480mm, ground clearance of 388mm, and a seat height of 960mm. It weighs in at 98kg and has a fuel capacity of 9.5L.

Technical specifications:

Make Model: Maico Cross 380

Year: 2003 – 05
Engine: Single cylinder, two stroke
Capacity: 369 cc / 22.5 cub in
Bore x Stroke: 82 x 70 mm
Cooling System: Liquid cooled
Fuel System: Mikuni TMX 38
Ignition: PVL digital
Starting: Kick
Max Power: 44.7 kW / 60 hp
Clutch: Wet, multi-plate
Transmission: 5-Speed
Final Drive: Chain
Frame: Chrom Molybd~An Rohr
Front Suspension: WP 48
Front Wheel Travel: 305 mm / 12.0 in.
Rear Suspension: MAICO Twin link Reiger shock
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single disc, 260 mm, 2-piston caliper
Rear Brakes: Single disc, 220 mm , 1-piston caliper
Wheels: Alloy, wire spokes
Front Rim: 1.60 x 21 in.
Rear Rim: 2.15 x 19 in.
Front Tyre: 90/90-21
Rear Tyre: 120/90-19
Wheelbase: 1480 mm / 58.3 in.
Ground Clearance: 388 mm / 15.3 in.
Seat Height: 960 mm / 37.8 in.
Dry Weight: 98 kg / 216 lbs
Fuel Capacity: 9.5 L / 2.5 US gal

The post Maico Cross 380 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Honda CB400 Super Four (2003-05) https://motorcyclespecifications.com/honda-cb400-super-four-2003-05-specs/ Thu, 30 Mar 2023 20:54:55 +0000 https://motorcyclespecifications.com/?p=38141 The Honda CB400 Super Four is a motorcycle model produced from 2003-05. It features a liquid-cooled transverse four-cylinder four-stroke DOHC engine with a capacity of 399cc and a compression ratio

The post Honda CB400 Super Four (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Honda CB400 Super Four is a motorcycle model produced from 2003-05. It features a liquid-cooled transverse four-cylinder four-stroke DOHC engine with a capacity of 399cc and a compression ratio of 11.3:1. The bike uses 4x 32mm carbs, with an ignition and starting system. The maximum power output is 53 hp at 11,000 rpm with 40.18 Nm of torque at 7500 rpm. The bike uses a 5-speed transmission and a chain drive. The front suspension and rear suspension of the bike are not specified. The front brake consists of 2x 296mm discs with 4 piston calipers while the rear brake has a single 240mm disc with 2 piston caliper. The front and rear tires have sizes of 120/70 ZR17 and 160/50 ZR17 respectively. The bike has a dry weight of 170 kg and a fuel capacity of 11.3 liters.

Technical specifications:

Make Model: Honda CB 400SF Super Four

Year: 2003-05
Engine: Liquid cooled, transverse four cylinders, four stroke, DOHC,
Capacity: 399
Bore x Stroke: 55 x 42 mm
Compression Ratio: 11.3:1
Induction: 4x 32mm carbs
Ignition / Starting:
Max Power: 53 hp 38.6 kW @ 11000 rpm
Max Torque: 40.18 Nm @ 7500 rpm
Transmission / Drive: 5 Speed / chain
Front Suspension:
Rear Suspension:
Front Brakes: 2x 296mm discs 4 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 160/50 ZR17
Dry Weight: 170 kg
Fuel Capacity: 11.3 Litres

The post Honda CB400 Super Four (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Kawasaki GPX250R (2003-05) https://motorcyclespecifications.com/kawasaki-gpx250r-2003-05-specs/ Thu, 30 Mar 2023 14:35:01 +0000 https://motorcyclespecifications.com/?p=37784 The Kawasaki GPX250R (2003-05) is a motorcycle that features a four-stroke parallel twin engine with a capacity of 248 cc. It has a liquid-cooled system with a compression ratio of

The post Kawasaki GPX250R (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Kawasaki GPX250R (2003-05) is a motorcycle that features a four-stroke parallel twin engine with a capacity of 248 cc. It has a liquid-cooled system with a compression ratio of 12.4:1 and an induction of 2x Keihin CVK30 Constant velocity. The bike has a maximum power of 45 hp at 11000 rpm and a maximum torque of 24 Nm at 10000 rpm. It has a six-speed transmission with a wet, multi-disc, manual, cable-actuated clutch, and a final drive chain. The frame is designed as a tubular diamond with telescopic forks for the front suspension and a UNI-TRAK single shock for the rear suspension. The motorcycle features single disc brakes for both front and rear, with a tire size of 100/80-16 for the front and 130/80-16 for the rear. It has a rake of 27 degrees and a trail of 84 mm, a wheelbase of 1400 mm, and a seat height of 740 mm. The dry weight of the bike is 138 kg, while the wet weight is 160 kg, with a fuel capacity of 18 liters. The standing 1/4 mile is 13.8 sec, with a top speed of 152.7 km/h or 94.9 mph.

Technical specifications:

Make Model: Kawasaki GPX 250R / EX250 Ninja / ZZR 250

Year: 2003 – 05
Engine: Four stroke . parallel twin, DOHC , 4 valve per cylinder
Capacity: 248 cc / 15.2 cu-in
Bore x Stroke: 62 41.2mm
Cooling System: Liquid cooled
Compression Ratio: 12.4:1
Induction: 2x Keihin CVK30 Constant velocity, diaphragm-type
Ignition: Electronic advance
Spark Plug: NGK CR8HSA, CR8HIX, CR8HVX option CR7HSA, CR7HIX
Starting: Electric
Max Power: 45 hp / 33.5 kW @ 11000 rpm
Max Torque: 24 Nm / 17.7 lb-ft @ 10000 rpm
Clutch: Wet, multi-disc, manual, cable-actuated
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular diamond design
Front Suspension: Telescopic forks
Front Wheel Travel: 140 mm / 5.5 in
Rear Suspension: UNI-TRAK single shock
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: Single 260mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 100/80-16
Rear Tyre: 130/80-16
Rake: 27 degrees
Trail: 84 mm / 3.3 in
Wheelbase: 1400 mm / 55.1 in
Seat Height: 740 mm / 29.3 in
Ground Clearance: 150 mm / 6.1 in
Dry Weight: 138 kg / 304 lbs
Wet Weight: 160 kg / 355 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Standing 1/4 Mile: 13.8 sec / 82.3 mph 132.4 km/h
Top Speed: 152.7 km/h / 94.9 mph

The post Kawasaki GPX250R (2003-05) appeared first on MotorcycleSpecifications.com.

]]> BMW R1200C Avantgarde (2003-05) https://motorcyclespecifications.com/bmw-r1200c-avantgarde-2003-05-specs/ Thu, 30 Mar 2023 06:48:05 +0000 https://motorcyclespecifications.com/?p=37348 The BMW R1200C Avantgarde was manufactured between 2003 and 2005. The motorcycle has a four-stroke, two-cylinder horizontally opposed Boxer engine with a capacity of 1170 cc and a compression ratio

The post BMW R1200C Avantgarde (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The BMW R1200C Avantgarde was manufactured between 2003 and 2005. The motorcycle has a four-stroke, two-cylinder horizontally opposed Boxer engine with a capacity of 1170 cc and a compression ratio of 10.0:1. The engine is equipped with Bosch Motronic MA 2.4 fuel injection and has a maximum power of 61 hp at 5000 rpm and maximum torque of 98 Nm at 3000 rpm. The bike features a dry, single plate, hydraulic-operated clutch and a 5-speed transmission with the final drive provided by a shaft. The frame is composed of a front and rear section with a load-bearing engine. The front suspension is provided by the Motorrad Telelever, and the rear suspension is a die-cast aluminum single-sided swinging arm with BMW’s Monolever motorrad. The brakes consist of two 305mm discs with 4 piston calipers at the front and a single 285mm disc with 2 piston caliper at the rear. The BMW R1200C Avantgarde weighs 255 kg when wet and has a fuel capacity of 17.5 liters. The top speed of the bike is 178.1 km/h, and it can accelerate from 0 to 100 km/h in 13.8 seconds. The bike has a power-to-weight ratio of 0.14hp/kg and a consumption average of 5.9 L/100 km.

Technical specifications:

Make Model: BMW R 1200C Avantgarde

Year: 2003 – 05
Engine: Four stroke, two cylinder horizontally opposed Boxer, 4 valves per cylinder
Capacity: 1170 cc / 71.4 cu in.
Bore x Stroke: 101 x 73mm
Cooling System: Air/Oil cooled
Compression Ratio: 10.0:1
Lubrication: Wet sump
Induction: Bosch Motronic MA 2.4 Fuel injection
Ignition: Digital CDI Bosch Electronic
Charging System: 14 V 50 Amp Alternator (700 W)
Battery: BMW Mareg, 19.5 Amp/h low maintenance
Starting: Electric
Max Power: 44.5 kW / 61 hp @ 5000 rpm
Power-to-weight ratio: 0.14 hp/kg / 6.92 kg/hp
Max Torque: 98 Nm / 10.0 kgf-m / 72.27 lb-ft @ 3000 rpm
Clutch: Dry, single plate, hydraulic operated
Transmission: 5 Speed
Final Drive: Shaft
Gear Ratio: 1st 2.045 / 2nd 1.600 / 3rd 1.267 / 4th 1.038 / 5th 0.800:1
Frame: Three section composite frame consisting of front & rear section, load bearing engine
Front Suspension: Motorrad Telelever, stanchion 35mm, central strut
Front Wheel Travel: 145 mm / 5.7 in
Rear Suspension: Die cast aluminium single sided swinging arm with BMW Motorrad Monolever, WAD strut (travel related damping), spring preload adjustable to continuously variable levels by means of hydraulic handwheel.
Rear Wheel Travel: 110 mm / 4.3 in
Front Brakes: 2 x 305mm discs, 4 piston calipers
Rear Brakes: Single 285mm disc, 2 piston caliper
Front wheel: 2.50 x 18 cross spoke
Rear wheel: 4.00 x 15 cross spoke
Front Tyre: 100/90-18
Rear Tyre: 170/80-15
Trail: 86 mm / 3.4 in
Dimensions: Length 2340 mm / 92.1 in Width 1050 mm / 44.3 in Height 1130 mm / 44.4 in
Wheelbase: 1650 mm / 64.9 in
Seat Height: 740 mm / 29.1 in
Ground Clearance: 172 mm / 6.77 in
Dry Weight: 236 kg / 482 lbs
Wet Weight: 255 kg / 565 lbs
Fuel Capacity: 17.5 Litres / 4.5 gal
Consumption Average: 5.9 L/100 km / 17.0 km/l / 40 US mpg
Braking 60 km/h – 0: 13.2 m / 43.3 ft
Braking 100 km/h – 0: 40.1 m / 131.6 ft
Standing 1/4 Mile: 13.8 sec / 151.5 km/h / 94.1 mph
Top Speed: 178.1 km/h / 110.7 mph

The post BMW R1200C Avantgarde (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Hyosung GT 125 Comet (2003-05) https://motorcyclespecifications.com/hyosung-gt-125-comet-2003-05-specs/ Thu, 30 Mar 2023 02:32:01 +0000 https://motorcyclespecifications.com/?p=37103 The Hyosung GT 125 Comet was manufactured between 2003 and 2005. The motorcycle features a four-stroke, 75 degree V-twin engine with double overhead cams and four valves per cylinder. It

The post Hyosung GT 125 Comet (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Hyosung GT 125 Comet was manufactured between 2003 and 2005. The motorcycle features a four-stroke, 75 degree V-twin engine with double overhead cams and four valves per cylinder. It has a capacity of 124cc and a compression ratio of 11.2:1. The bike has 2x 26mm Mikuni carburetors for induction and an electronic CDI ignition. The GT 125 Comet has an electric start and produces a maximum power output of 14.2 hp at 10300 rpm, and a maximum torque of 9.7 Nm at 10000 rpm.

The motorcycle has a wet, multiplate clutch and a five-speed transmission, with a final chain drive. The frame is made of steel, double-pipe and it has a telescopic fork front suspension with 120mm of wheel travel, and a swinging-arm rear suspension with 100mm of wheel travel. The brakes consist of a single 300mm disc in the front and a single 230mm disc in the rear.

The front tire size is 110/70 -17 and the rear tire size is 150/70 -17. The bike has a wheelbase of 1445mm and a seat height of 795mm. The dry weight is 150kg and the fuel capacity is 17 liters/4.4 US gallons.

Technical specifications:

Make Model: Hyosung GT 125 Comet

Year: 2003 – 05
Engine: Four stroke, 75 degreesV twin, DOHC, 4 valve per cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 44 x 41 mm
Cooling System: Air/oil cooled
Compression Ratio: 11.2:1
Induction: 2x 26mm Mikuni carburetor
Ignition: CDI
Starting: Electric
Max Power: 14.2 hp / 10.7 kW @ 10300 rpm
Max Torque: 9.7 Nm / 7.2 lb-ft @ 10000 rpm
Clutch: Wet, Multiplate
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, double pipe
Front Suspension: Telescopic forks, 120mm wheel travel
Rear Suspension: Swinging arm, 100mm wheel travel.
Front Brakes: Single 300mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 110/70 -17
Rear Tyre: 150/70 -17
Wheelbase: 1445 mm / 56.9 in
Seat Height: 795 mm / 31.3 in
Dry Weight: 150 kg / 330.7 lbs
Fuel Capacity: 17 Litres / 4.4 US gal

The post Hyosung GT 125 Comet (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Yamaha XVS125 (2003-05) https://motorcyclespecifications.com/yamaha-xvs125-2003-05-specs/ Wed, 29 Mar 2023 13:51:58 +0000 https://motorcyclespecifications.com/?p=36393 The Yamaha XVS 125 Drag Star is a motorcycle produced between 2003 and 2005. It has a four-stroke V-twin cylinder engine with a capacity of 124cc and a maximum power

The post Yamaha XVS125 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Yamaha XVS 125 Drag Star is a motorcycle produced between 2003 and 2005. It has a four-stroke V-twin cylinder engine with a capacity of 124cc and a maximum power of 13hp at 10000 rpm. The maximum torque is 9.4 Nm at 7500 rpm. The motorcycle utilizes a carburetor for induction and TCI (Transistor Controlled Ignition) for ignition. The clutch is wet, multiple discs, cable-operated, and the transmission has five speeds. It has a chain-driven final drive. The front suspension consists of cartridge telescopic forks while the rear suspension is dual shock with a swingarm. The front wheel travel is 140mm, and the rear wheel travel is 100mm. Front brakes consist of a single 282mm disc, while the rear brakes are a 130mm drum. The front tire is 80/100-18, and the rear tire is 130/90-15. The dimensions of the motorcycle include a length of 2320mm, a width of 910mm, and a height of 1075mm. The wheelbase measures at 1530mm, and the seat height is 665mm. It has a dry weight of 135kg, and the fuel capacity is 11 litres or 2.9 US gal.

Technical specifications:

Make Model: Yamaha XVS 125 Drag Star

Year: 2003 – 05
Engine: Four stroke, V-twin cylinder, SOHC, 2 valve per cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 41 x 47 mm
Cooling System: Air cooled
Compression Ratio: 11.0;1
Induction: Carburetor
Ignition: TCI (Transistor Controlled Ignition)
Spark plug: NGK, CR7HSA
Starting: Electric
Max Power: 13 hp / 9.5 kW @ 10000 rpm
Max Torque: 9.4 Nm / 6.9 lb-ft @ 7500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Cartridge telescopic forks
Front Wheel Travel: 140 mm/ 5.5 in
Rear Suspension: Dual shock, Swingarm
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 282 mm disc
Rear Brakes: 130 mm Drum
Front Tyre: 80/100-18
Rear Tyre: 130/90-15
Dimensions: Length 2320 mm / 91.3 in Width 910 mm / 35.8 in Height 1075 mm / 42.3 in
Wheelbase: 1530 mm / 58.9 in
Seat Height: 665 mm / 26.2 in
Dry Weight: 135 kg / 297.6 lbs
Fuel Capacity: 11 Litres / 2.9 US gal

The post Yamaha XVS125 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GZ 250 Marauder (2003-05) https://motorcyclespecifications.com/suzuki-gz-250-marauder-2003-05-specs/ Wed, 29 Mar 2023 06:58:04 +0000 https://motorcyclespecifications.com/?p=36009 The Suzuki GZ 250 Marauder is a cruiser motorcycle released between 2003 and 2005. It features a four-stroke, single-cylinder engine with a capacity of 249cc and a compression ratio of

The post Suzuki GZ 250 Marauder (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GZ 250 Marauder is a cruiser motorcycle released between 2003 and 2005. It features a four-stroke, single-cylinder engine with a capacity of 249cc and a compression ratio of 9.0:1. The bike is air-cooled and uses a Mikuni BSR32SS carburetor for induction. The ignition system is digital transistorized and the starting mechanism is electric. The bike delivers a maximum power of 14.9 kW or 20 hp at 7500 rpm and a torque of 20.6 Nm or 15.2 lb-ft at 6500 rpm. Transmission is 5-speed and final drive is through a chain. The frame is made of tubular steel and the suspension system is made up of telescopic forks at the front and a swingarm with dual shocks and five-way adjustable damping at the rear. Braking is handled by a single 275mm disc at the front and a 130mm drum at the rear. The bike comes with front and rear tires sized at 110/90-16 and 130/90-15, respectively. The bike has a length of 2160mm, a width of 815mm and a height of 1090mm, and a ground clearance of 125mm. The seat height is 680mm, and the dry weight is 137kg, while the wet weight is 150kg. The fuel capacity is 13 liters. Overall, the Suzuki GZ 250 Marauder is a cruiser motorcycle.

Technical specifications:

Make Model: Suzuki GZ 250 Marauder

Year: 2003 – 05
Engine: Four stroke, single cylinder, SOHC, 2 valves
Capacity: 249 cc / 15.2 cu in
Bore x Stroke: 72 x 61.2 mm
Compression Ratio: 9.0:1
Cooling System: Air cooled
Lubrication System: Wet sump
Induction: Mikuni BSR32SS carburetor
Ignition: Digital transistorized
Starting: Electric
Max Power: 14.9 kW / 20 hp @ 7500 rpm
Max Torque: 20.6 Nm 2.1kgf-m 15.2 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain, #520
Frame: Tubular steel, single downtube
Front Suspension: Telescopic forks, oil damping
Rear Suspension: Swingarm, dual shocks, coil springs , 5-way adjustable damping
Front Brakes: Single 275mm disc
Rear Brakes: 130mm Drum
Front Tyre: 110/90-16 59P or 59S
Rear Tyre: 130/90-15 66P or 66S
Dimensions: Length: 2160 mm / 85.0in Width: 815 mm / 32.1 in Height: 1090 mm / 42.9 in
Wheelbase: 1450 mm / 57.1 in
Ground Clearance: 125 mm / 4.9 in
Seat Height: 680 mm / 27.8 in
Dry Weight: 137 kg / 302 lbs
Wet Weight: 150 kg / 331 lbs
Fuel Capacity: 13 Litres / 3.4 US gal / 2.9 Imp gal
Review: Cruiser

The post Suzuki GZ 250 Marauder (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Suzuki DR200SE (2003-05) https://motorcyclespecifications.com/suzuki-dr200se-2003-05-specs/ Wed, 29 Mar 2023 05:36:05 +0000 https://motorcyclespecifications.com/?p=35931 The Suzuki DR200SE (2003-05) is a motorbike with a four-stroke, single-cylinder, OHC engine that has 2 valves per cylinder. Its capacity is 198.5cc with a bore of 66mm and a

The post Suzuki DR200SE (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki DR200SE (2003-05) is a motorbike with a four-stroke, single-cylinder, OHC engine that has 2 valves per cylinder. Its capacity is 198.5cc with a bore of 66mm and a stroke of 58.2mm. The motorbike is air-cooled with a wet sump lubrication system and a compression ratio of 9.4:1. Induction is provided by a Mikuni BST31 and ignition is through a digital CDI with an NGK DR8EA spark plug. The bike has electric starting and can deliver a maximum power of 15.5kW (20hp) at 8500rpm with a maximum torque of 18.6Nm (1.9kgf-m/13.7 lb-ft) at 7000rpm. Its transmission is a 5-speed with a final drive through a chain of size #520. The front and rear suspension are telescopic and mono-shock, respectively, both oil-damped with the rear shock being adjustable preload. The front brake is a single disc of 230mm while the rear brake is a drum of 130mm. The front tyre is 70/100-21 M/C 44P, tube type while the rear tyre is 100/90-18 M/C 56P, tube type. The bike has a length of 2150mm (85.0 in), width of 805mm (31.7 in), height of 1185mm (46.7in), and seat height of 810mm (31.9 in). Its wheelbase is 1405mm (55.3 in) with a dry weight of 113kg (249 lbs) and a wet weight of 126 kg (278 lbs). The fuel tank can hold up to 13 liters (3.4 US gal/2.9 Imp gal).

Technical specifications:

Make Model: Suzuki DR 200SE

Year: 2003 – 05
Engine: Four stroke, single cylinder, OHC, 2 valves per cylinder.
Capacity: 198.5 cc / 12.1 cu in
Bore x Stroke: 66 x 58.2 mm
Cooling System: Air cooled
Lubrication System: Wet sump
Compression Ratio: 9.4:1
Induction: Mikuni BST31
Ignition: Digital CDI
Spark Plug: NGK DR8EA
Starting: Electric
Max Power: 15.5 kW / 20 hp @ 8500 rpm
Max Torque: 18.6 Nm / 1.9 kgf-m / 13.7 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain, #520
Front Suspension: Telescopic, oil damped
Rear Suspension: Mono shock, oil damped, adjustable preload
Front Brakes: Single disc 230 mm
Rear Brakes: Drum, 130 mm
Front Tyre: 70/100-21 M/C 44P, tube type
Rear Tyre: 100/90-18 M/C 56P, tube type
Dimensions: Length: 2150 mm / 85.0 in Width: 805 mm / 31.7 in Height: 1185 mm / 46.7 in
Seat Height: 810 mm /31.9 in
Wheelbase: 1405 mm / 55.3 in
Dry Weight: 113 kg / 249 lbs
Wet Weight: 126 kg / 278 lbs
Fuel Capacity: 13 Litres / 3.4 US gal / 2.9 Imp gal

The post Suzuki DR200SE (2003-05) appeared first on MotorcycleSpecifications.com.

]]> BMW R1200C Independent (2003-05) https://motorcyclespecifications.com/bmw-r1200c-independent-2003-05-specs/ Tue, 28 Mar 2023 18:06:04 +0000 https://motorcyclespecifications.com/?p=35293 The BMW R 1200C Independent is a motorcycle produced from 2003 to 2005. It is powered by a 1170 cc, four stroke, two cylinder horizontally opposed Boxer engine with 4

The post BMW R1200C Independent (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The BMW R 1200C Independent is a motorcycle produced from 2003 to 2005. It is powered by a 1170 cc, four stroke, two cylinder horizontally opposed Boxer engine with 4 valves per cylinder and a compression ratio of 10.0:1. The engine is cooled by an air/oil cooling system and fuel injected with a Bosch Motronic MA 2.4 system. The maximum power output is 44.5 kW / 61 hp at 5000 rpm and the maximum torque is 98 Nm / 10.0 kgf-m / 72.27 lb-ft at 3000 rpm. The bike has a dry weight of 236 kg / 482 lbs and a fuel capacity of 17.5 liters / 4.5 gallons. It features a three-section composite frame with a load-bearing engine, front and rear suspension, and a shaft final drive. The front suspension is a Motorrad Telelever with a stanchion 35mm central strut, while the rear suspension is a die-cast aluminum single-sided swinging arm with a BMW Motorrad Monolever and WAD strut. The bike has front and rear brakes with 305mm discs and 4 piston calipers on the front and a single 285mm disc and 2 piston caliper on the back. The front wheel is a 2.50 x 18, three spoke alloy wheel and the rear wheel is a 4.00 x 15, three spoke alloy wheel. The fuel consumption average is 5.9 L/100 km / 17.0 km/l / 40 US mpg and the top speed is 178.1 km/h / 110.7 mph.

Technical specifications:

Make Model: BMW R 1200C Independent

Year: 2003 – 05
Engine: Four stroke, two cylinder horizontally opposed Boxer, 4 valves per cylinder
Capacity: 1170 cc / 71.4 cu in.
Bore x Stroke: 101 x 73mm
Cooling System: Air/Oil cooled
Compression Ratio: 10.0:1
Lubrication: Wet sump
Induction: Bosch Motronic MA 2.4 Fuel injection
Ignition: Digital CDI Bosch Electronic
Charging System: 14 V 50 Amp Alternator (700 W)
Battery: BMW Mareg, 19.5 Amp/h low maintenance
Starting: Electric
Max Power: 44.5 kW / 61 hp @ 5000 rpm
Power-to-weight ratio: 0.14 hp/kg / 6.92 kg/hp
Max Torque: 98 Nm / 10.0 kgf-m / 72.27 lb-ft @ 3000 rpm
Clutch: Dry, single plate, hydraulic operated
Transmission: 5 Speed
Final Drive: Shaft
Gear Ratio: 1st 2.045 / 2nd 1.600 / 3rd 1.267 / 4th 1.038 / 5th 0.800:1
Frame: Three section composite frame consisting of front & rear section, load bearing engine
Front Suspension: Motorrad Telelever, stanchion 35mm, central strut
Front Wheel Travel: 145 mm / 5.7 in
Rear Suspension: Die cast aluminium single sided swinging arm with BMW Motorrad Monolever, WAD strut (travel related damping), spring preload adjustable to continuously variable levels by means of hydraulic handwheel.
Rear Wheel Travel: 110 mm / 4.3 in
Front Brakes: 2 x 305mm discs, 4 piston calipers
Rear Brakes: Single 285mm disc, 2 piston caliper
Front wheel: 2.50 x 18, three spoke alloy
Rear wheel: 4.00 x 15, three spoke alloy
Front Tyre: 100/90-18
Rear Tyre: 170/80-15
Trail: 86 mm / 3.4 in
Dimensions: Length 2340 mm / 92.1 in Width 1050 mm / 44.3 in Height 1130 mm / 44.4 in
Wheelbase: 1650 mm / 64.9 in
Seat Height: 740 mm / 29.1 in
Ground Clearance: 172 mm / 6.77 in
Dry Weight: 236 kg / 482 lbs
Wet Weight: 255 kg / 565 lbs
Fuel Capacity: 17.5 Litres / 4.5 gal
Consumption Average: 5.9 L/100 km / 17.0 km/l / 40 US mpg
Braking 60 km/h – 0: 13.2 m / 43.3 ft
Braking 100 km/h – 0: 40.1 m / 131.6 ft
Standing 1/4 Mile: 13.8 sec / 151.5 km/h / 94.1 mph
Top Speed: 178.1 km/h / 110.7 mph

The post BMW R1200C Independent (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Harley Davidson FXD/I Dyna Super Glide (2003-05) https://motorcyclespecifications.com/harley-davidson-fxd-i-dyna-super-glide-2003-05-specs/ Tue, 28 Mar 2023 16:24:15 +0000 https://motorcyclespecifications.com/?p=35200 The Harley Davidson FXD/I Dyna Super Glide motorcycle was produced from 2003-05, with a four-stroke, 45 degrees V-Twin, Twin Cam 88 (R) engine that was air-cooled and had a capacity

The post Harley Davidson FXD/I Dyna Super Glide (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Harley Davidson FXD/I Dyna Super Glide motorcycle was produced from 2003-05, with a four-stroke, 45 degrees V-Twin, Twin Cam 88 (R) engine that was air-cooled and had a capacity of 1449 cc / 88.4 cu-in. The engine had two valves per cylinder, a compression ratio of 8.9:1 and was carbureted with a 40mm constant velocity with enrichener and accelerator pump ESPFI 38mm throttle bore for electronic sequential port fuel injection. The ignition was a single-fire, non-wasted, map-controlled spark ignition and the bike had an electric starting feature. The gearbox was 5-speed with final drive via a belt, and the bike had a mild steel tubular frame with rectangular section backbone and forged junctions. Suspension was 39 mm in the front with polished aluminum fork triple clamp and dual-rate springs, and a coil-over shock in the rear. Braking was provided by a single 292mm disc with 4-piston calipers in the front and rear. The bike had a 29 degree rake and fork angle with a trail of 120mm / 4.7 in. The bike’s dimensions were 2357mm / 92.8 in in length, a wheelbase of 1630mm / 64.2 in, and a seat height of 675.6mm / 26.6 in when laden, and 700.0mm / 27.6 in when unladen. The bike’s dry weight was 287kg / 632.2lbs, with a wet weight of 301kg / 663lbs and a fuel capacity of 18.6L / 4.8 US gal.

Technical specifications:

Make Model: Harley Davidson FXD/I Dyna Super Glide

Year: 2003 – 05
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 88 (R) vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1449 cc / 88.4 cu-in
Bore x Stroke: 95.3 x 101.6 mm
Cooling System: Air cooled
Compression Ratio: 8.9:1
Lubrication: Dry sump, internally mounted, crank driven gerotor pressure and dual scavenge pump with spin on 10~Anot pressurized oil filter
Induction: Carburetion 40 mm constant velocity with enrichener and accelerator pump ESPFI 38 mm throttle bore electronic sequential port fuel injection
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Power: 67 hp / 48.8 kW @ 5200 rpm
Max Torque: 116.6 Nm / 86 lb-ft @ 3500rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.110 2nd 6.958 3rd 4.953 4th 3.862 5th 3.150
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 39 mm w/ polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: Single 292mm disc 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston calipers
Front Tyre: 100/90-19
Rear Tyre: MT90 B16
Rake: 29 degrees
Fork Angle: 29 degrees
Trail: 120 mm / 4.7 in
Dimensions: Length 2357.0 mm / 92.8 in
Wheelbase: 1630.0 mm / 64.2 in
Seat Height: Laden2 675.6 mm / 26.6 in Unladen 700.0 mm / 27.6 in
Ground Clearance: 153 mm / 6.0 in
Dry Weight: 287 kg / 632.2 lbs
Wet Weight: 301 kg / 663 lbs
Fuel Capacity: 18.6 Litres / 4.8 US gal

The post Harley Davidson FXD/I Dyna Super Glide (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Highland 950 V2 Super Motard (2003-05) https://motorcyclespecifications.com/highland-950-v2-super-motard-2003-05-specs/ Mon, 27 Mar 2023 18:34:06 +0000 https://motorcyclespecifications.com/?p=33961 The Highland 950 V2 Super Motard motorcycle was produced from 2003 to 2005. It featured a four-stroke, 936cc 60-degree V-twin engine with DOHC and four valves per cylinder. The bike

The post Highland 950 V2 Super Motard (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Highland 950 V2 Super Motard motorcycle was produced from 2003 to 2005. It featured a four-stroke, 936cc 60-degree V-twin engine with DOHC and four valves per cylinder. The bike had a liquid-cooled system and had a compression ratio of 10.0:1. It had an induction system of fuel injection and had an integrated engine management system with ignition coils directly fitted on the spark plugs. The electric start produced a maximum power of 85hp at 6000rpm and a maximum torque of 104 Nm at 4700rpm. The bike has a six-speed gearbox and a lubricated multi-disc clutch. The rectangular section of CrMo steel and aluminum made up the frame. The front suspension had a 50 mm WP and an adjustable compression and rebound with the front wheel travel of 280 mm. The rear suspension had a WP, adjustable stiffness, and compression and rebound with the rear wheel travel of 300 mm. The front brake comprised a single 300mm disc 2-piston caliper, while the rear brake consisted of a single 220mm disc 1-piston caliper. The front tyre size was a 120/90-17 and the rear tyre was a 160/90-17. The bike had a wheelbase of 1530 mm, a seat height of 840 mm, and a ground clearance of 230 mm. It had a dry weight of 164 kg and a fuel capacity of 20 liters.

Technical specifications:

Make Model: Highland 950 V2 Super Motard

Year: 2003 – 05
Engine: Four stroke, 60 degrees V-Twin, DOHC, 4 valves per cylinder
Capacity: 936 cc / 57.1 cu-in
Bore x Stroke: 95 x 96 mm
Cooling System: Liquid cooled
Compression Ratio: 10.0:1
Induction: Fuel injection
Ignition: Integrated engine management system with ignition coils fitted directly on the spark plugs
Starting: Electric
Max Power: 85 hp / 62 kW @ 6000 rpm
Max Torque: 104 Nm / 76.7 lb-ft @ 4700 rpm
Clutch: lubricated mult disk clutch
Transmission: 6 Speed
Final Drive: Chain
Frame: Rectangular section, CrMo steel and aluminium
Front Suspension: 50mm WP, adjustable compression and rebound
Front Wheel Travel: 280 mm / 11.0 in
Rear Suspension: WP, adjustable stiffness, compression and rebound
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 300mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston calipers
Front Tyre: 120/90-17
Rear Tyre: 160/90-17
Wheelbase: 1530 mm / 60.2 in
Seat Height: 840 mm / 33.1 in
Ground Clearance: 230 mm / 9.1 in
Dry Weight: 164 kg / 361.6 lbs
Fuel Capacity: 20 Litres / 5.2 US gal

The post Highland 950 V2 Super Motard (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Kawasaki VN1600 Classec Fi (2003-05) https://motorcyclespecifications.com/kawasaki-vn1600-classec-fi-2003-05-specs/ Mon, 27 Mar 2023 10:54:01 +0000 https://motorcyclespecifications.com/?p=33523 The Kawasaki VN1600 Classic FI is a motorcycle manufactured between 2003 and 2005. It is powered by a four-stroke V-Twin engine with a capacity of 1552cc and a compression ratio

The post Kawasaki VN1600 Classec Fi (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Kawasaki VN1600 Classic FI is a motorcycle manufactured between 2003 and 2005. It is powered by a four-stroke V-Twin engine with a capacity of 1552cc and a compression ratio of 9.0:1. The engine uses electronic fuel injection and has a maximum power of 65.7 hp and a maximum torque of 127 Nm. The motorcycle has a 5-speed transmission and a shaft final drive. The front suspension consists of 43mm inverted forks with a wheel travel of 150mm, while the rear suspension is a swingarm with dual air-assisted shocks that are adjustable for rebound and preload, with a wheel travel of 94mm. The brakes on the motorcycle are 320mm discs with six-piston calipers on the front and a single 300mm disc with a two-piston caliper at the rear. The VN1600 Classic FI has a height of 1130mm, a length of 2504mm, and a width of 1039mm, with a wheelbase of 1680mm and a seat height of 680mm. The bike has a ground clearance of 130mm, a dry weight of 307kg, and a fuel capacity of 20 litres.

Technical specifications:

Make Model: Kawasaki VN 1600 Classic FI

Year: 2003 – 05
Engine: Four stroke, V-Twin, SOHC, 4 valves per cylinder
Capacity: 1552 cc / 94.7 cu-in
Bore x Stroke: 102 x 95 mm
Cooling System: Liquid cooled
Compression Ratio: 9.0:1
Induction: Electronic fuel injection, 2 x 40mm throttle bodies
Ignition: Electronic
Starting: Electric
Max Power: 65.7 hp / 48 kW @ 4700 rpm
Max Torque: 127 Nm / 93.7 lb-ft @ 2700 rpm
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: 43mm inverted forks
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Swingarm with dual air-assisted shocks, adjustable for rebound and preload
Rear Wheel Travel: 94 mm / 3.7 in
Front Brakes: 2x 320mm discs 6 piston calipers
Rear Brakes: Single 300mm disc 2 piston caliper
Front Tyre: 130/70 R17
Rear Tyre: 170/60 R17
Rake: 32.0 degrees
Dimensions: Height 1130 mm / 44.5 in Length 2504 mm / 98.6 in Width 1039 mm / 40.9 in
Wheelbase: 1680 mm / 66.1 in
Seat Height: 680 mm / 26.8 in
Ground Clearance: 130 mm / 5.1 in
Dry Weight: 307 kg / 676.8 lbs
Fuel Capacity: 20 Litres / 5.2 US gal

The post Kawasaki VN1600 Classec Fi (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GZ 125 LC Marauder (2003-05) https://motorcyclespecifications.com/suzuki-gz-125-lc-marauder-2003-05-specs/ Mon, 27 Mar 2023 07:14:06 +0000 https://motorcyclespecifications.com/?p=33319 The Suzuki GZ 125 LC Marauder is a 124cc V-twin motorcycle produced from 2003 to 2005. It has a four-stroke, 65-degree V-Twin engine with an OHC and two valves. The

The post Suzuki GZ 125 LC Marauder (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GZ 125 LC Marauder is a 124cc V-twin motorcycle produced from 2003 to 2005. It has a four-stroke, 65-degree V-Twin engine with an OHC and two valves. The bore and stroke are 44 x 40.9mm with a compression ratio of 10.3:1. The cooling system is air-cooled with a wet sump lubrication system. The fuel system uses a carburetor with a Mikuni BDS26 and the ignition is digital electronic with an electric start. The bike has a max power of 9.8 kW / 13.3 hp at 10,500 rpm and a max torque of 9.8 Nm / 1.0 kgf/m / 7.2 lb-ft at 9500 rpm. The clutch is a wet, multi-plate design with a 5-speed constant mesh transmission and chain final drive. The suspension is a conventional, oil-damped, coil-sprung telescopic in the front and a swingarm, twin shock absorber with adjustable spring preload in the rear. Braking is done with a single 275mm disc in the front and a 130mm drum in the rear. The bike has a rake of 31.7o and a trail of 120mm / 4.7 in. Its dimensions are 2240mm / 88.2 in in length, 880mm / 34.6 in in width, and 1110mm / 43.7 in in height with a wheelbase of 1520mm / 59.8 in and a seat height of 685mm / 27.0 in. The dry weight is 140 kg / 309 lbs with a fuel capacity of 12 litres / 3.2 US gal / 2.6 Imp gal. Overall, the Suzuki GZ 125 LC Marauder is a lightweight and easy-to-handle motorcycle.

Technical specifications:

Make Model: Suzuki GZ 125 LC Marauder

Year: 2003 – 05
Engine: Four stroke, 65o V-Twin, OHC, 2 valves
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 44 x 40.9 mm
Compression Ratio: 10.3:1
Cooling System: Air cooled
Lubrication System: Wet sump
Induction: Carburetor, Mikuni BDS26
Ignition: Digital electronic
Starting: Electric
Max Power: 9.8 kW / 13.3 hp @ 10 500 rpm
Max Torque: 9.8 Nm / 1.0 kgf/m / 7.2 lb-ft @ 9500 rpm
Clutch: Wet, multi-plate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Front Suspension: Conventional, oil damped, coil-sprung telescopic
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swingarm, twin shock absorber, adjustable spring preload
Rear Wheel Travel: 90 mm / 3.5 in
Front Brakes: Single 275 mm disc
Rear Brakes: 130 mm Drum
Front Tyre: 90/90-18
Rear Tyre: 130/90-15
Rake: 31.7o
Trail: 120 mm / 4.7 in
Dimensions: Length: 2240 mm / 88.2 in Width: 880 mm / 34.6 in Height: 1110 mm / 43.7 in
Wheelbase: 1520 mm / 59.8 in
Seat Height: 685 mm / 27.0 in
Dry Weight: 140 kg / 309 lbs
Fuel Capacity: 12 Litres / 3.2 US gal / 2.6 Imp gal
Overview: Motorcycle News

The post Suzuki GZ 125 LC Marauder (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Honda FJS 600 Silver Wing ABS (2003-05) https://motorcyclespecifications.com/honda-fjs-600-silver-wing-abs-2003-05-specs/ Mon, 27 Mar 2023 06:36:11 +0000 https://motorcyclespecifications.com/?p=33283 The Honda FJS 600 Silver Wing ABS (SW-T 600GT) motorcycle was produced from 2003-05. It had a 582cc four-stroke, parallel-twin engine with liquid-cooling and a 2-into-1 exhaust. The bike had

The post Honda FJS 600 Silver Wing ABS (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Honda FJS 600 Silver Wing ABS (SW-T 600GT) motorcycle was produced from 2003-05. It had a 582cc four-stroke, parallel-twin engine with liquid-cooling and a 2-into-1 exhaust. The bike had a maximum power output of 50hp at 7500 rpm and maximum torque of 54 Nm at 6000 rpm. The transmission was automatic V-Matic and the final drive was a belt. The front suspension was a 41mm telescopic fork, while the rear suspension was a swingarm with dual shocks that had 5-position spring preload adjustable. The front brake was a single 256mm disc with 3-piston calipers and ABS while the rear brake was a single 220mm disc with a 2-piston caliper and ABS. The motorcycle had an average fuel consumption of 16.1 km/lit and a fuel capacity of 16L. With a wet weight of 245kg, the bike had a top speed of 161.2 km/h (100 mph) and could complete the standing quarter-mile in 15.9 seconds. The seat height of the bike was 754mm and the wheelbase was 1600mm. Overall, the Honda FJS 600 Silver Wing ABS was a powerful and reliable motorcycle with a comfortable ride.

Technical specifications:

Make Model: Honda FJS 600 Silver Wing / ABS (SW-T 600GT)

Year: 2003-05
Engine: Four stroke, parallel twin, DOHC, 4 valves per cylinder
Capacity: 582 cc / 35.5 cub in
Bore x Stroke: 72 x 71.5 mm
Cooling System: Liquid cooled
Compression Ratio: 10.2:1
Exhaust: 2-into-1
Induction: PGM-FI with automatic enrichment circuit, 4-hole injectors
Ignition: Computer controlled fully transistorised with electronic advance
Battery: 12 Volt
Starting: Electric
Max Power: 50 hp / 36.5 kW @ 7500 rpm
Max Torque: 54 Nm / 39.8 kW @ 6000 rpm
Transmission: Automatic V-Matic
Final Drive: Belt
Front Suspension: 41 mm Telescopic fork
Front Wheel Travel: 107 mm / 4.2 in
Rear Suspension: Swingarm with dual shocks, 5-positionspring preload adjustable
Rear Wheel Travel: 114 mm / 4.5 in
Front Brakes: Single 256mm disc 3 piston calipers ABS
Rear Brakes: Single 220mm disc 2 piston caliper ABS
Front Tyre: 120/80-14
Rear Tyre: 150/70-13
Wheelbase: 1600 mm / 63 in
Seat Height: 754 mm / 27.9 in
Wet Weight: 245 kg / 541 lbs
Fuel Capacity: 16 L / 4.2 US gal
Average Consumption: 16.1 km/lit
Standing 1/4 Mile: 15.9 sec
Top Speed: 161.2 km/h / 100 mph

The post Honda FJS 600 Silver Wing ABS (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Maico Supermoto 380 (2003-05) https://motorcyclespecifications.com/maico-supermoto-380-2003-05-specs/ Mon, 27 Mar 2023 01:39:05 +0000 https://motorcyclespecifications.com/?p=33001 The Maico Supermoto 380 motorcycle model was produced between 2003 and 2005. It featured a liquid cooled, single cylinder, two-stroke engine with a capacity of 369 cc and a maximum

The post Maico Supermoto 380 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Maico Supermoto 380 motorcycle model was produced between 2003 and 2005. It featured a liquid cooled, single cylinder, two-stroke engine with a capacity of 369 cc and a maximum power output of 44.7 kW or 60 horsepower. The ignition was 12V with a 130W SEM and the bike had a wet, multi-plate clutch and a 5-speed transmission with a final drive chain.

The frame was made of chrom molybd~an rohr and the front suspension was a WP 48 with 305mm or 12 inches front wheel travel. The rear suspension featured a Maico Twin link Reiger shock with a rear wheel travel of 320mm or 12.6 inches.

The Supermoto 380 had alloy wheels with wire spokes, a front rim of 3.5 x 17 inches and a rear rim of 4.25 x 17 inches. The front and rear tyres were 120/70-17 and 150/60-17 respectively. The bike had a wheelbase of 1480mm or 58.3 inches, a ground clearance of 358mm or 14.1 inches, and a seat height of 930mm or 36.6 inches.

The bike weighed 109kg or 240 lbs dry and had a fuel capacity of 9.5 L or 2.5 US gallons. Overall, the Maico Supermoto 380 was a fast and powerful bike with a unique design and advanced features.

Technical specifications:

Make Model: Maico Supermoto 380

Year: 2003 – 05
Engine: Single cylinder, two stroke
Capacity: 369 cc / 22.5 cub in
Bore x Stroke: 82 x 70 mm
Cooling System: Liquid cooled
Exhaust: Single, upswept
Fuel System: Bing 40 oval
Ignition: 12V 130W SEM
Starting: Kick
Max Power: 44.7 kW / 60 hp
Clutch: Wet, multi-plate
Transmission: 5-Speed
Final Drive: Chain
Frame: Chrom Molybd~An Rohr
Front Suspension: WP 48
Front Wheel Travel: 305 mm / 12.0 in.
Rear Suspension: MAICO Twin link Reiger shock
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single disc, 260 mm, 2-piston caliper
Rear Brakes: Single disc, 220 mm , 1-piston caliper
Wheels: Alloy, wire spokes
Front Rim: 3.50 x 17 in.
Rear Rim: 4.25 x 17 in.
Front Tyre: 120/70-17
Rear Tyre: 150/60-17
Wheelbase: 1480 mm / 58.3 in.
Ground Clearance: 358 mm / 14.1 in.
Seat Height: 930 mm / 36.6 in.
Dry Weight: 109 kg / 240 lbs
Fuel Capacity: 9.5 L / 2.5 US gal

The post Maico Supermoto 380 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Honda VTX1300C (2003-05) https://motorcyclespecifications.com/honda-vtx1300c-2003-05-specs/ Sun, 26 Mar 2023 06:05:04 +0000 https://motorcyclespecifications.com/?p=31887 The Honda VTX 1300C motorcycle was produced between 2003 and 2005. It features a four-stroke, fifty-two degree V-twin engine with a capacity of 1312 cc or 80 cubic inches. The

The post Honda VTX1300C (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Honda VTX 1300C motorcycle was produced between 2003 and 2005. It features a four-stroke, fifty-two degree V-twin engine with a capacity of 1312 cc or 80 cubic inches. The engine is liquid-cooled, has a compression ratio of 9.2:1, and is lubricated by a wet sump. It is powered by a single 38mm carburetor and has solid-state digital ignition. The VTX 1300C has a maximum power output of 74 horsepower at 5,000rpm and a maximum torque of 123 Nm or 90.7 lb-ft at 3,000rpm. The clutch is wet with multiple discs and is cable-operated. The transmission has five speeds, and the final drive is a shaft. The frame is made of steel and features a double cradle design. The front suspension is a 41mm telescopic fork, and the rear suspension is dual shocks with five-position spring preload adjustability. The front brakes consist of a single 336mm disc with a two-piston caliper, while the rear brakes have a single 296mm disc with a one-piston caliper. The front tire is 130mm with a 19-inch diameter, while the rear tire is 170/80 with a 15-inch diameter. The rake is 32.4 degrees, and the trail is 140mm or 5.9 inches. The wheelbase measures 1661mm, and the seat height is 695mm or 27.4 inches. The dry weight of the VTX 1300C is 290.7kg or 641lbs, and the fuel capacity is 18 liters or 4.8 US gallons.

Technical specifications:

Make Model: Honda VTX 1300C

Year: 2003-05
Engine: Four stroke, 52 degreesV-twin, SOHC,
Capacity: 1312 cc / 80 cu-in
Bore x Stroke: 89.5 x 104.3 mm
Cooling System: Liquid cooled
Compression Ratio: 9.2:1
Lubrication: Wet sump
Induction: Single 38mm constant-velocity carburetor
Ignition: Solid-state digital
Stgarting: Electric
Max Power: 74 hp / 55kW @ 5.000rpm
Max Torque: 123 Nm / 90.7 lb-ft @ 3.000rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Shaft
Frame: Steel, Double cradle frame
Front Suspension: 41mm telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Dual shocks with five-position spring preload adjustability
Rear Wheel Travel: 91 mm / 3.5 in
Front Brakes: Single 336mm disc 2 piston caliper
Rear Brakes: Single 296mm disc 1 piston caliper
Front Tyre: 10/90-19 M/C
Rear Tyre: 170/80-15 M/C
Rake: 32.4 degrees
Trail: 140 mm / 5.9 in
Wheelbase: 1661 mm / 65.4 in
Seat Height: 695 mm / 27.4 in
Dry Weight: 290.7 kg / 641 lbs
Fuel Capacity: 18 Litres / 4.8 US gal

The post Honda VTX1300C (2003-05) appeared first on MotorcycleSpecifications.com.

]]> BMW K 12000 LT (2003-05) https://motorcyclespecifications.com/bmw-k-12000-lt-2003-05-specs/ Sun, 26 Mar 2023 04:49:04 +0000 https://motorcyclespecifications.com/?p=31814 The BMW K 1200 LT is a luxury touring motorcycle that was produced between 2003 and 2005. It features a liquid-cooled, four-stroke, fuel-injected, 1,171 cc engine that produces 116 horsepower

The post BMW K 12000 LT (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The BMW K 1200 LT is a luxury touring motorcycle that was produced between 2003 and 2005. It features a liquid-cooled, four-stroke, fuel-injected, 1,171 cc engine that produces 116 horsepower and 86 lb-ft of torque. The bike is equipped with shaft drive and a six-speed transmission.

The K 1200 LT has a comfortable riding position, with a high windshield, heated grips and seats, cruise control, and adjustable footrests. It also has a top-case and saddlebags that provide ample storage space for long-distance touring.

The motorcycle is built with BMW’s patented Telelever and Paralever suspension systems, which provide a smooth and stable ride even on rough roads. It also features ABS brakes and an electronic suspension adjustment system that allows the rider to adjust the suspension according to the load on the bike.

The K 1200 LT has received praise for its smooth and powerful engine, comfortable ergonomics, and long-distance touring capabilities. However, some riders have noted that the bike is heavy and difficult to maneuver at low speeds.

Overall, the BMW K 1200 LT is a high-end touring motorcycle that offers a powerful engine, comfortable ride, and advanced suspension and braking systems. It is a great choice for those seeking a comfortable and luxurious touring experience.

Technical specifications:

Continue reading

The post BMW K 12000 LT (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Kawasaki ER-5 Twister (2003-05) https://motorcyclespecifications.com/kawasaki-er-5-twister-2003-05-specs/ Sat, 25 Mar 2023 08:52:06 +0000 https://motorcyclespecifications.com/?p=30684 The Kawasaki ER-5 Twister was a motorcycle model produced from 2003-05. The engine was a four stroke, parallel twin cylinder, DOHC, with 4 valves per cylinder and a capacity of

The post Kawasaki ER-5 Twister (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Kawasaki ER-5 Twister was a motorcycle model produced from 2003-05. The engine was a four stroke, parallel twin cylinder, DOHC, with 4 valves per cylinder and a capacity of 498cc. The cooling system was liquid-cooled with a compression ratio of 9.8:1. It had 2x 34mm Keihin CVK induction and a digital ignition. The maximum power output was 50hp at 8500 rpm and 45.2 Nm of torque at 7000 rpm. Transmission was a 6-speed, with a final drive chain. The suspension featured a 37mm telescopic fork on the front, and dual rear shocks with 5-way adjustable preload on the back. The front brakes were a single 280mm disc with a 2-piston caliper, while the rear brakes were a 160mm drum. The front tyre was 110/70 R17, and the rear tyre was 130/70 R17. The wheelbase was 1430mm, and the seat height was 815mm. The dry weight was 180.0kg, and the fuel capacity was 17 litres/4.4 US gal.

Technical specifications:

Make Model: Kawasaki ER-5 Twister

Year: 2003 – 05
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valves per cylinder.
Capacity: 498 cc / 30.4 cu-in
Bore x Stroke: 74 x 58 mm
Cooling System: Liquid cooled
Compression Ratio: 9.8:1
Induction: 2x 34mm Keihin CVK
Ignition: Digital
Starting: Electric
Max Power: 50 hp / 36.5 kW @ 8500 rpm
Max Torque: 45.2 Nm / 33.2 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 37 mm telescopic fork
Front Wheel Travel: 125 mm / 4.9 in
Rear Suspension: Dual rear shocks with 5-way adjustable preload
Rear Wheel Travel: 114 mm / 4.5 in
Front Brakes: Single 280mm disc 2 piston caliper
Rear Brakes: 160mm drum
Front Tyre: 110/70 R17
Rear Tyre: 130/70 R17
Wheelbase: 1430 mm / 56.3 in
Seat Height: 815 mm / 32.1 in
Dry Weight: 180.0 kg / 396.8
Fuel Capacity: 17 Litres / 4.4 US gal

The post Kawasaki ER-5 Twister (2003-05) appeared first on MotorcycleSpecifications.com.

]]> Yamaha TT225 (2003-05) https://motorcyclespecifications.com/yamaha-tt225-2003-05-specs/ Fri, 24 Mar 2023 19:43:55 +0000 https://motorcyclespecifications.com/?p=29939 The Yamaha TT-R 225 is a motorcycle produced from 2003-2005. It has a four-stroke, single-cylinder engine with a capacity of 223cc and a compression ratio of 9.5. The bike features

The post Yamaha TT225 (2003-05) appeared first on MotorcycleSpecifications.com.

]]> The Yamaha TT-R 225 is a motorcycle produced from 2003-2005. It has a four-stroke, single-cylinder engine with a capacity of 223cc and a compression ratio of 9.5. The bike features a Teikei carburetor induction system, CDI ignition, and electric starting. The transmission has six speeds for a smooth ride, and the final drive is a chain. The front suspension consists of telescopic forks with 229mm of wheel travel, while the rear suspension uses a link-type, single-shock system with 193mm of travel. The front brake is a single 229mm disc, and the rear brake is a drum. The tires are 80/100-21 in the front and 100/100-18 in the rear, while the wheelbase is 1372mm and the seat height is 870mm. The bike has a ground clearance of 290mm and a fuel capacity of 10.2 liters. The dry weight of the motorcycle is not specified.

Technical specifications:

Make Model: Yamaha TT-R 225

Year: 2003 – 05
Engine: Four stroke, single cylinder, SOHC, 2 valve
Capacity: 223 cc / 13.6 cu-in
Bore x Stroke: 70 x 58 mm
Cooling System: Air cooled
Compression Ratio: 9.5:
Induction: 26mm Teikei carburetor
Ignition: CDI
Starting: Electric
Max Power: NA
Max Torque: NA
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Front Wheel Travel: 229 mm / 9.0 in
Rear Suspension: Link Type single shock
Rear Wheel Travel: 193 mm / 7.6 in
Front Brakes: Single 229mm disc
Rear Brakes: Drum
Front Tyre: 80/100-21
Rear Tyre: 100/100-18
Wheelbase: 1372 mm / 54 in
Seat Height: 870 mm / 34.2 in
Ground Clearance: 290 mm / 11.4 in
Dry Weight: NA
Fuel Capacity: 10.2 Litres / 2.7 US gal

The post Yamaha TT225 (2003-05) appeared first on MotorcycleSpecifications.com.

]]>