1973-75 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 23:00:38 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 Suzuki TS250 (1973-75) https://motorcyclespecifications.com/suzuki-ts250-1973-75-specs/ Fri, 07 Apr 2023 11:24:07 +0000 https://motorcyclespecifications.com/?p=48207 The Suzuki TS250 was a two-stroke, single-cylinder motorcycle produced from 1973 to 1975. It had a capacity of 246 cc, with a bore and stroke of 72 x 64 mm

The post Suzuki TS250 (1973-75) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki TS250 was a two-stroke, single-cylinder motorcycle produced from 1973 to 1975. It had a capacity of 246 cc, with a bore and stroke of 72 x 64 mm and a compression ratio of 6.7:1. The engine was air-cooled with a fuel/oil mix and Posi-force lubrication system. The bike had a single, high drawn exhaust and used a Mikuni VM28SH carburetor. It could produce a maximum power of 17.2 kW / 23 hp at 6500 rpm and a maximum torque of 26.5 Nm / 2.7 kgf-m / 19.6 lb-ft at 5000 rpm. The clutch was a wet, multi-plate system with a 5-speed, constant mesh transmission and chain final drive.

The front suspension featured a telescopic fork, oil-damped with 175 mm / 6.9 in of wheel travel. The rear suspension was a swingarm with dual shocks, coil springs, and 5-way adjustability. The braking system had drum, internal expanding brakes on both the front and rear wheels. The TS250 had a wheelbase of 1415 mm / 55.7 in with ground clearance of 249 mm / 9.8 in. It weighed 111 kg / 245 lbs with a fuel tank capacity of 9.1 L / 2.4 US gal / 2.0 Imp gal and an oil capacity of 1.1 L / 2.3 US pt / 1.9 Imp pt. Its top speed was estimated at 129 km/h / 80 mph.

The Suzuki TS250 was a capable off-road motorcycle that offered a reliable and powerful ride. Its lightweight design and maneuverability made it suitable for various terrains. However, its drum brake system could be tricky to use in extreme conditions, and riders had to be cautious not to overheat the engine due to the fuel/oil mix system. Overall, the TS250 remains a classic model that paved the way for future Suzuki dirt bikes.


Technical specifications:

Make Model: Suzuki TS 250

Year: 1973 – 75
Engine: Two stroke, single cylinder
Capacity: 246 cc / 15.0 cu in
Bore x Stroke: 72 x 64 mm
Compression Ratio: 6.7:1
Cooling System: Air cooled
Lubrication System: Fuel/oil mix, Posi-force, CCI
Exhaust: Single, high drawn
Induction: Mikuni VM28SH carburetor
Ignition: Suzuki PEI
Starting: Kick
Max Power: 17.2 kW / 23 hp @ 6500 rpm
Max Torque: 26.5 Nm / 2.7 kgf-m / 19.6 lb-ft @ 5000 rpm
Clutch: Wet, multi-plate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Front Suspension: Telescopic fork, oil damped
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Swingarm, dual shocks, coil springs, 5-way adjustable
Front Brakes: Drum, internal expanding
Rear Brakes: Drum, internal expanding
Front Tyre: 3.25-19 4PR Trails
Rear Tyre: 4.00-18 4PR Trails
Dimensions: Length: 2184 mm / 86.0 inWidth: 889 mm / 35.0 in Height: 1100 mm / 43.3 in
Wheelbase: 1415 mm / 55.7 in
Ground Clearance: 249 mm / 9.8 in
Dry Weight: 111 kg / 245 lbs
Oil Capacity: 1.1 L / 2.3 US pt / 1.9 Imp pt
Fuel Capacity: 9.1 L / 2.4 US gal / 2.0 Imp gal
Top Speed (est.): 129 km/h / 80 mph

The post Suzuki TS250 (1973-75) appeared first on MotorcycleSpecifications.com.

]]>
Yamaha DT360 (1973-75) https://motorcyclespecifications.com/yamaha-dt360-1973-75-specs/ Tue, 04 Apr 2023 08:05:12 +0000 https://motorcyclespecifications.com/?p=44078 The Yamaha DT360A was manufactured from 1973-75 and features a two stroke, single cylinder engine with a capacity of 351 cc. The bike has a compression ratio of 6.4:1 and

The post Yamaha DT360 (1973-75) appeared first on MotorcycleSpecifications.com.

]]>
The Yamaha DT360A was manufactured from 1973-75 and features a two stroke, single cylinder engine with a capacity of 351 cc. The bike has a compression ratio of 6.4:1 and is cooled by air. The DT360A is equipped with a single 30mm Mikuni carburetor and CDI ignition, and can produce a maximum power of 32 hp at 6000 rpm and a maximum torque of 3.6 kgf-m at 6500 rpm. The transmission is a five speed with final chain drive. The front suspension consists of telescopic forks and the rear suspension has dual shocks. The brakes are drum brakes, and the bike has a wheelbase of 1425 mm and a ground clearance of 220 mm. The dry weight of the DT360A is 125 kg and the wet weight is 134 kg. The fuel capacity is 9 litres.


Technical specifications:

Make Model: Yamaha DT 360A

Year: 1973 – 75
Engine: Two stroke, single cylinder, read valve
Capacity: 351 cc / 21.4 cu-in
Bore x Stroke: 80 70 mm
Cooling System: Air cooled
Compression Ratio: 6.4:1
Induction: Single 30mm Mikuni carburetor
Ignition: CDI
Starting: Kick
Max Power: 32 hp / 23.4 kW @ 6000 rpm
Max Torque: 3.6 kgf-m / 26 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Wheelbase: 1425 mm / 56.1 in
Ground Clearance: 220 mm / 8.6 in
Dry Weight: 125 kg / 275.5 lbs
Wet Weight: 134 kg / 295.4 lbs
Fuel Capacity: 9 Litres / 2.3 US gal

The post Yamaha DT360 (1973-75) appeared first on MotorcycleSpecifications.com.

]]>
Honda XL175 (1973-75) https://motorcyclespecifications.com/honda-xl175-1973-75-specs/ Sat, 01 Apr 2023 19:00:07 +0000 https://motorcyclespecifications.com/?p=40691 The Honda XL175 was a four-stroke, single-cylinder motorcycle manufactured between 1973 and 1975. Its engine had a capacity of 175cc and a compression ratio of 9.2:1. The motorcycle had a

The post Honda XL175 (1973-75) appeared first on MotorcycleSpecifications.com.

]]>
The Honda XL175 was a four-stroke, single-cylinder motorcycle manufactured between 1973 and 1975. Its engine had a capacity of 175cc and a compression ratio of 9.2:1. The motorcycle had a double-cradle frame and was equipped with a 5-speed transmission with a chain final drive. The XL175 also had air-cooled cooling and a wet wimp lubrication system, along with a single 24mm Keihin induction and a magneto ignition starting system. The motorcycle had a maximum power and torque output, which is not specified in the provided content. The bike had Showa air-assisted forks which provided a 200mm wheel travel along with Showa Pro-Link shocks that offered a 165mm wheel travel. Additionally, the motorcycle had 110mm drum brakes on both the front and the rear wheels, and its tyres had dimensions of 2.75-21 for the front and 4.10-18 for the rear. The wheelbase of the motorcycle was 1366.5mm, and its ground clearance was 210mm. The dry weight of the bike was 110kg, and its fuel capacity was seven litres, or 1.8 US gallons.


Technical specifications:

Make Model: Honda XL 175

Year: 1973 – 75
Engine: Four stroke, single cylinder, OHC, 2 valve
Capacity: 175 cc / 10.6 cu-in
Bore x Stroke:
Cooling System: Air cooled
Compression Ratio: 9.2:1
Lubrication: Wet wimp
Induction: Single 24mm Keihin
Ignition: Magneto
Starting: Kick
Max Power:
Max Torque:
Transmission: 5 Speed
Final Drive: Chain
Frame: Double cradle
Front Suspension: 38mm Showa air assisted forks, 200mm wheel travel
Rear Suspension: Showa Pro-Link shocks, 165mm wheel travel
Front Brakes: 110mm drum
Rear Brakes: 110mm drum
Front Tyre: 2.75-21
Rear Tyre: 4.10-18
Wheelbase: 1366.5 mm / 53.5 in
Ground Clearance: 210 nn . 8.3 in
Dry Weight: 110 kg / 242 lbs
Fuel Capacity: 7 Litres / 1.8 US gal

The post Honda XL175 (1973-75) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XLCH 1000 Sportster (1973-75) https://motorcyclespecifications.com/harley-davidson-xlch-1000-sportster-1973-75-specs/ Fri, 24 Mar 2023 18:12:08 +0000 https://motorcyclespecifications.com/?p=29851 The Harley Davidson XLCH 1000 Sportster was produced from 1973-1975 and featured a four-stroke 45-degree V-twin engine, with a capacity of 997cc and 2 valves per cylinder. The engine was

The post Harley Davidson XLCH 1000 Sportster (1973-75) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XLCH 1000 Sportster was produced from 1973-1975 and featured a four-stroke 45-degree V-twin engine, with a capacity of 997cc and 2 valves per cylinder. The engine was air-cooled and had a compression ratio of 9.0:1, with a lubrication system that employed dry sump technology. Induction was via a 38mm Keihin carburetor, and ignition was electronic. The engine produced 57 hp at 6200 rpm and 60 lb-ft of torque at 3500 rpm. The XLCH 1000 Sportster was available with a kick-starter, and an optional electric starter was also available. The clutch was wet, multiple discs, and cable-operated, with a transmission of four speeds. The final drive was chain-driven. The XLCH 1000 Sportster had a steel double-cradle frame, with telehydraulic front forks and dual shocks swinging arm fork rear suspension. The front brake was a single 292mm disc, with a single 203mm drum brake at the rear. The front tire size was 3.75-19, with a rear tire size of 4.25-18. The dry weight was 235 kg, and it had a fuel capacity of 9 liters or 2.3 US gallons.


Technical specifications:

Make Model: Harley Davidson XLCH 1000 Sportster

Year: 1973 – 75
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 997 cc / 60.8 cu-in
Bore x Stroke: 81 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Lubrication: Dry sump
Induction: 38mm Keihin carburetor
Ignition: Electronic
Starting: Kick & Electric optional
Max Power: 57 hp / 41.6 kW @ 6200 rpm
Max Torque: 60 lb ft / 81 Nm @ 3500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 4 Speed
Final Drive: Chain
Frame: Steel, Double cradle frame
Front Suspension: Telehydraulic forks
Rear Suspension: Dual shocks swinging arm fork
Front Brakes: Single 292mm disc
Rear Brakes: Single 203mm drum
Front Tyre: 3.75-19
Rear Tyre: 4.25-18
Dry Weight: 235 kg / 518 lbs
Fuel Capacity: 9 Litres / 2.3 US gal

The post Harley Davidson XLCH 1000 Sportster (1973-75) appeared first on MotorcycleSpecifications.com.

]]>