1967-68 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Sun, 16 Apr 2023 22:23:35 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 Suzuki T200 (1967-68) https://motorcyclespecifications.com/suzuki-t200-1967-68-specs/ Thu, 06 Apr 2023 12:12:02 +0000 https://motorcyclespecifications.com/?p=46940 The Suzuki T200 Invader was a motorcycle produced by Suzuki from 1967-68. Featuring a two-stroke, parallel twin engine with a capacity of 196cc, it had a compression ratio of 7.0:1

The post Suzuki T200 (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki T200 Invader was a motorcycle produced by Suzuki from 1967-68. Featuring a two-stroke, parallel twin engine with a capacity of 196cc, it had a compression ratio of 7.0:1 and produced 23 horsepower at 7500 rpm. The bike was air-cooled and used a wet, multi-plate clutch system with a 5-speed constant mesh transmission and chain final drive. The frame was a tri-form design with a telescopic hydraulic fork for the front suspension and hydraulic shocks for the rear. The front and rear brakes were both drum, internal expanding, leading shoe systems. The bike had a wheelbase of 1270mm and a wet weight of 123kg with a fuel capacity of 12 litres. The standing 1/4 mile time was 17.4 seconds, while its top speed was estimated at 142 km/h.


Technical specifications:

Make Model: Suzuki T 200 Invader

Year: 1967 – 68
Engine: Two stroke, parallel twin
Capacity: 196 cc / 12.0 cu in
Bore x Stroke: 50 x 50 mm
Compression Ratio: 7.0:1
Cooling System: Air cooled
Lubrication System: Posi-Force lubtication
Exhaust: 2-into-2, Power pipe, upswept
Induction: Mikuni VM22SH
Ignition: Battery and coil
Starting: Kick
Spark Plug: B-77HC
Max Power: 17.2 kW / 23 hp @ 7500 rpm
Max Torque: 22.6 Nm / 2.3 kgf-m / 16.7 lb-ft @ 7000 rpm
Clutch: Wet,multi-plate
Transmission: 5-Speed, constant mesh
Final Drive: Chain
Primary Reduction: 2.95
Gear Ratios: 1 st 2.77 / 2nd 1.72 / 3rd 1.32 / 4th 1.09 / 5th 0.92
Final Reduction: 2.64
Frame: Tri-form frame
Front Suspension: Telescopic hydraulic fork
Rear Suspension: Twin, plunger type hydraulic shocks, swingarm
Front Brakes: Drum, internal expanding, leading shoe
Rear Brakes: Drum, internal expanding, leading shoe
Front Tyre: 2.75-18
Rear Tyre: 2.75-18
Dimensions: Length: 1930 mm / 76.0 in Width: 775 mm / 30.5 in Height: 1030 mm / 40.6 in
Wheelbase: 1270 mm / 50.0 in
Ground Clearance: 163 mm / 6.4 in
Seat Height: 780 mm / 30.7 in
Wet Weight: 123 kg / 272 lbs
Oil Capacity: 1.6 L / 1.7 US qt / 1.4 Imp qt
Fuel Capacity: 12 L / 3.2 US gal / 2.6 Imp gal
Standing 1/4 Mile: 17.4 sec / 122 km/h / 76 mph
Top Speed (est.): 142 km/h / 88 mph

The post Suzuki T200 (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
Ducati 125 Cadet/4 / Lusso / Scrambler (1967-68) https://motorcyclespecifications.com/ducati-125-cadet-4-lusso-scrambler-1967-68-specs/ Tue, 04 Apr 2023 02:35:04 +0000 https://motorcyclespecifications.com/?p=43774 The Ducati 125 Cadet/4, Cadet/4 Lusso, and Cadet/4 Scrambler were produced between 1967 and 1968. They boast a four-stroke, single-cylinder, OHV pushrod engine and have a capacity of 121.3 cc.

The post Ducati 125 Cadet/4 / Lusso / Scrambler (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati 125 Cadet/4, Cadet/4 Lusso, and Cadet/4 Scrambler were produced between 1967 and 1968. They boast a four-stroke, single-cylinder, OHV pushrod engine and have a capacity of 121.3 cc. The compression ratio is 8.4:1, and the cooling system is air-cooled, while the lubrication system is dry sump. These motorcycles have kick-start engines and can produce up to 6.5 horsepower at 6500 rpm. They also have a four-speed transmission and chain final drive. The suspension comprises Marzocchi hydraulically damped telescopic forks at the front and a swingarm with dual shocks at the back. The brakes on both the front and rear are 118 mm drum, and they are equipped with Dell’Orto ME18BS induction systems. The Cadet and Lusso versions weigh 72 kg (159 lbs), while the Scrambler weighs 75 kg (165 lbs). The fuel capacity is 14 L (3.7 US gal/3.1 Imp gal), and they can reach top speeds of 95 km/h (59 mph) for the Cadet and Lusso and 80 km/h (50 mph) for the Scrambler. The front and rear tire sizes differ, depending on the version of the motorcycle.


Technical specifications:

Make Model: Ducati 125 Cadet/4 / Cadet/4 Lusso / Cadet/4 Scrambler

Year: 1967 – 68
Engine: Four stroke, single-cylinder, OHV, pushrod
Capacity: 121.3 cc / 7.4 cu in
Bore x Stroke: 53 x 55 mm
Compression Ratio: 8.4:1
Cooling System: Air cooled
Lubrication System: Dry sump
Induction: Dell’Orto ME18BS
Ignition: 6V, 28W generator, coil
Starting: Kick
Max Power: 4.8 kW / 6.5 hp @ 6500 rpm
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Marzocchi hydraulically damped telescopic forks
Rear Suspension: Swingarm, dual chocks
Front Brakes: 118 mm Drum
Rear Brakes: 118 mm Drum
Front Tyre: 1967 Cadet: 2.25 x 18 1968 Cadet & Lusso: 2.50 x 18 Scrambler: 2.75 x 18
Rear Tyre: 1967 Cadet: 2.50 x 18 1968 Cadet & Lusso: 2.75 x 18 Scrambler: 3.25 – 3.50 x 16
Dimensions: Length: 1810 mm / 71.3 in Height: 770 mm / 30.3 in
Wheelbase: 1160 mm / 45.7 in
Seat Height: 670 mm / 26.4 in
Dry Weight: Cadet & Lusso: 72 kg / 59 lbs Scrambler: 75 kg / 165 lbs
Fuel Capacity: 14 L / 3.7 Us gal / 3.1 Imp gal
Top Speed: Cadet & Lusso: 95 km/h / 59 mph Scrambler: 80 km/h / 50 mph

The post Ducati 125 Cadet/4 / Lusso / Scrambler (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki T125 (1967-68) https://motorcyclespecifications.com/suzuki-t125-1967-68-specs/ Fri, 31 Mar 2023 16:08:58 +0000 https://motorcyclespecifications.com/?p=39213 The Suzuki T125, produced in 1967-68, has a two-stroke parallel twin engine with a capacity of 124 cc/7.6 cu in and is air-cooled. It has dual carburetors and is kick-started.

The post Suzuki T125 (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki T125, produced in 1967-68, has a two-stroke parallel twin engine with a capacity of 124 cc/7.6 cu in and is air-cooled. It has dual carburetors and is kick-started. The bike has a maximum power of 11.2 kW/15 hp at 8500 rpm and maximum torque of 13.5 Nm/1.38 kgf-m/10.0 lb-ft at 7000 rpm. It has a 5-speed transmission and final drive is via chain. The front suspension is a telescopic fork and the rear suspension is twin, plunger type shocks. The front and rear brakes are drum brakes. The front and rear tires are respectively sized at 3.00-18 and 3.25-16. The bike itself has dimensions of 1930 mm/76.0 in (L) x 775 mm/30.5 in (W) x 1030 mm/40.6 in (H) and the wheelbase is 1285 mm/50.6 in. The dry weight of the bike comes in at 127 kg/280 lbs.


Technical specifications:

Make Model: Suzuki T 125

Year: 1967 – 68
Engine: Two stroke, parallel twin
Capacity: 124 cc / 7.6 cu in
Cooling System: Air cooled
Induction: Dual carburetors
Starting: Kick
Max Power: 11.2 kW / 15 hp @ 8500 rpm
Max Torque: 13.5 Nm / 1.38 kgf-m / 10.0 lb-ft @ 7000 rpm
Transmission: 5-Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Twin, plunger type shocks
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-18
Rear Tyre: 3.25-16
Dimensions: Length: 1930 mm / 76.0 in Width: 775 mm / 30.5 in Height: 1030 mm / 40.6 in
Wheelbase: 1285 mm / 50.6 in
Dry Weight: 127 kg / 280 lbs

The post Suzuki T125 (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
Honda CB450 Four (1967-68) https://motorcyclespecifications.com/honda-cb450-four-1967-68-specs/ Fri, 31 Mar 2023 08:30:05 +0000 https://motorcyclespecifications.com/?p=38784 The Honda CB450 Four motorcycle was produced from 1967 to 1968 and was equipped with a four-stroke, parallel twin-cylinder engine with a capacity of 445 cc. It had a compression

The post Honda CB450 Four (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
The Honda CB450 Four motorcycle was produced from 1967 to 1968 and was equipped with a four-stroke, parallel twin-cylinder engine with a capacity of 445 cc. It had a compression ratio of 9.0:1 and was cooled by air. The bike utilized 2x 32mm Keihin carburetors, coil with auto-advance ignition and twin contact breaker starting. The maximum power output was recorded at 45 hp and 32.8 kW at 9000 rpm, with maximum torque of 37.4 Nm and 27.6 lb-ft at 7000 rpm. The bike came with a 5-speed transmission and a chain final drive. The frame of the bike was a tubular semi-duplex cradle with a single down tube. Both the front and rear suspensions had dampening shock absorbers, and the rear suspension was a swing arm with adjustable preload. The front and rear brakes were both drum brakes. The bike had a wheelbase of 1300 mm and weighed 187 kg dry, with a fuel capacity of 14 litres.


Technical specifications:

Make Model: Honda CB 450

Year: 1967 – 68
Engine: Four stroke, parallel twin cylinder, DOHC, 2 valves per cylinder
Capacity: 445 cc / 27.1 cu-in
Bore x Stroke: 70 x 57.8 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 2x 32mm Keihin carburetors
Ignition: Coil with auto-advance, twin contact breaker
Starting: Kick
Max Power: 45 hp / 32.8 kW @ 9000 rpm
Max Torque: 37.4 Nm / 27.6 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Frame: Tubular semi-duplex cradle with single front down-tube
Front Suspension: Telescopic forks with two-way damping.
Rear Suspension: Swing arm, shock absorbers with adjustable preload
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.25-18
Rear Tyre: 3.50-18
Wheelbase: 1300 mm / 53 in
Dry Weight: 187 kg / 412 lbs
Wet Weight: 204.0 kg / 449.7 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Honda CB450 Four (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
Ducati 350 SCD (1967-68) https://motorcyclespecifications.com/ducati-350-scd-1967-68-specs/ Thu, 30 Mar 2023 05:36:02 +0000 https://motorcyclespecifications.com/?p=37280 The Ducati 350 SCD (Sport Corsa Desmo) is a vintage motorcycle produced from 1967 to 1968. It has a four stroke, single cylinder, Desmo SOHC engine with a capacity of

The post Ducati 350 SCD (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati 350 SCD (Sport Corsa Desmo) is a vintage motorcycle produced from 1967 to 1968. It has a four stroke, single cylinder, Desmo SOHC engine with a capacity of 340.2 cc and a compression ratio of 10:1. The carburetor is a Dell’Orto SS1 30, and ignition is provided by points and coil with a 6V 30W generator. The bike has a max power of 30.2 kW / 41 hp at 10500 rpm, and is equipped with a wet multiplate clutch, straight cut gear primary drive, and a 5 speed transmission. The final drive is by chain. The chassis is a twin cradle, tubular steel frame, with Marzocchi 32mm telescopic fork suspension in the front and Marzocchi dual shocks in the rear. The bike has Oldani brakes with a disc diameter of 200mm. The wheels are 18 inches at the front and back, and the wheelbase is 1320 mm / 52.0 in. It has a dry weight of 117 kg / 258 lbs, and a top speed of 200 km/h / 124 mph.


Technical specifications:

Make Model: Ducati 350 SCD (Sport Corsa Desmo)

Year: 1967 – 68
Engine: Four stroke, single cylinder, Desmo SOHC, 2 valve, bevel gear-driven
Capacity: 340.2 cc / 20.8 cu-in
Bore x Stroke: 76 x 75 mm
Cooling System: Air cooled
Compression Ratio: 10:1
Induction: Dell’Orto SS1 30
Ignition: Points and coil, 6V 30W generator
Spark Plug: 2 x Lodge RL50
Starting: Kick
Max Power: 30.2 kW / 41 hp @ 10500 rpm
Clutch: Wet, multiplate
Primary Drive: Straight cut gear
Transmission: 5 Speed
Gear Ratios: 1st 43/17 / 2nd 38/22 / 3rd 35/26 / 4th 32/29 / 5th 30/31
Final Drive: Chain
Frame: Twin cradle, tubular steel
Front Suspension: Marzocchi 32 mm telescopic fork
Rear Suspension: Swingarm, Marzocchi dual shocks
Front Brakes: 200 mm Oldani
Rear Brakes: 200 mm Oldani
Front Tyre: 18
Rear Tyre: 18
Wheelbase: 1320 mm / 52.0 in
Dry Weight: 117 kg / 258 lbs
Top Speed: 200 km/h / 124 mph

The post Ducati 350 SCD (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
Moto Guzzi V 7 700 (1967-68) https://motorcyclespecifications.com/moto-guzzi-v-7-700-1967-68-specs/ Wed, 29 Mar 2023 15:17:02 +0000 https://motorcyclespecifications.com/?p=36474 Moto Guzzi released the V-7 700 motorcycle in 1967-68 with a 703cc engine, capable of producing 50HP at 6300 rpm and 49 Nm torque at 5000 rpm. The engine includes

The post Moto Guzzi V 7 700 (1967-68) appeared first on MotorcycleSpecifications.com.

]]>
Moto Guzzi released the V-7 700 motorcycle in 1967-68 with a 703cc engine, capable of producing 50HP at 6300 rpm and 49 Nm torque at 5000 rpm. The engine includes a four stroke, 90 degrees V twin, longitudinally mounted, OHV, 2 valve per cylinder design and a Dell’orto SS I 29 DS carburetor. The cooling system is air cooled while the compression ratio is 9.0:1. The clutch comprises twin driven dry plates, while the transmission has four-speed gears. The final drive is a shaft. The front suspension is telehydraulic forks, while the rear suspension is a swinging arm with hydraulic dampers. The bike has a dry weight of 228 kg / 502.6 lbs and fuel capacity of 20 Litres / 5.2 US gal. The front and rear brakes include 2x 220mm drum and 220mm drum respectively. The motorcycle’s tyres measure 4.00 -18 for both front and rear.


Technical specifications:

Make Model: Moto Guzzi V-7 700

Year: 1967 – 68
Engine: Four stroke, 90 degrees V twin, longitudinally mounted, OHV, 2 valve per cylinder
Capacity: 703 cc / 43.9 cu-in
Bore x Stroke: 80 x 70 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: Dell’orto SS I 29 DS carburetor
Ignition: Battery & coil
Starting: Electric
Max Power: 50 hp / 37.2 kW @ 6300 rpm
Max Torque: 49 Nm / 36 lb-ft @ 5000 rpm
Clutch: Twin driven dry plates
Transmission: 4 Speed
Final Drive: Shaft
Front Suspension: Telehydraulic forks
Rear Suspension: Swinging arm with hydraulic dampers.
Front Brakes: 2x 220mm drum
Rear Brakes: 220mm drum
Front Tyre: 4.00 -18
Rear Tyre: 4.00 -18
Dry Weight: 228 kg / 502.6 lbs
Fuel Capacity: 20 Litres / 5.2 US gal

The post Moto Guzzi V 7 700 (1967-68) appeared first on MotorcycleSpecifications.com.

]]>