1953 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 21:14:31 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 MV Agusta 150 Turismo TEL (1953) https://motorcyclespecifications.com/mv-agusta-150-turismo-tel-1953-specs/ Wed, 05 Apr 2023 23:37:58 +0000 https://motorcyclespecifications.com/?p=46257 The MV Agusta 150 Turismo TEL is a vintage motorcycle from 1953. It has a two stroke, single cylinder engine with a capacity of 148cc and a compression ratio of

The post MV Agusta 150 Turismo TEL (1953) appeared first on MotorcycleSpecifications.com.

]]>
The MV Agusta 150 Turismo TEL is a vintage motorcycle from 1953. It has a two stroke, single cylinder engine with a capacity of 148cc and a compression ratio of 6.0:1. The bike has a 20mm carburetor for induction and a 5% mixture for lubrication. The ignition is powered by a flywheel-magneto and has a kick start. The maximum power is 4.4 kW (or 6.0 hp) at 4800 rpm. It has a wet multiple plate clutch and a 4-speed transmission with a chain final drive. The frame is made of double cradle tubular and pressed steel, with a full front suspension of a telescopic hydraulic fork and a rear suspension of a swingarm with dual shocks. The brakes, both front and rear, measure 123mm drum. The bike has a length of 1920mm, a width of 620mm, and a wheelbase of 1270mm. It weighs 92kg and has a fuel capacity of 14 liters. The front and rear tires measure 2.75-19 each.


Technical specifications:

Make Model: MV Agusta 150 Turismo TEL

Year: 1953
Engine: Two stroke, single cylinder
Capacity: 148 cc / 9.0 cu-in
Bore x Stroke: 56 x 60 mm
Cooling System: Air cooled
Compression Ratio: 6.0:1
Induction: 20 mm carburettor
Lubrication: 5% mixture
Ignition: Flywheel-magneto
Starting: Kick
Max Power: 4.4 kW / 6.0 hp @ 4800 rpm
Clutch: Wet multiple plate clutch
Transmission: 4 Speed
Final Drive: Chain
Frame: Double cradle tubular and pressed steel
Front Suspension: Telescopic hydraulic fork
Rear Suspension: Swingarm with dual shocks
Front Brakes: 123mm Drum
Rear Brakes: 123mm Drum
Front Tyre: 2 75 19
Rear Tyre: 2 75 19
Dimensions: Length: 1920 mm / 75.5 in Width: 620 mm / 24.4 in
Wheelbase: 1270 mm / 50.0 in
Weight: 92 kg / 202.8 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post MV Agusta 150 Turismo TEL (1953) appeared first on MotorcycleSpecifications.com.

]]>
Adler MB 250 RS (1953) https://motorcyclespecifications.com/adler-mb-250-rs-1953-specs/ Mon, 03 Apr 2023 07:48:07 +0000 https://motorcyclespecifications.com/?p=42732 The Adler MB 250 RS is a 1953 motorcycle with a 2 cylinder, 2 stroke engine that has a capacity of 247 cc. It has a 54 x 54 mm

The post Adler MB 250 RS (1953) appeared first on MotorcycleSpecifications.com.

]]>
The Adler MB 250 RS is a 1953 motorcycle with a 2 cylinder, 2 stroke engine that has a capacity of 247 cc. It has a 54 x 54 mm bore x stroke and is air-cooled with petrol oil mix lubrication. The motorcycle features a multi-plate clutch and kick start with a 6V, 6Ah battery and Bosch coil ignition. It has twin Bing carburetors and a twin steel chrome exhaust system. The max power output is 19.2 kW at 7500rpm with a compression ratio of 1:5.75. The motorcycle has a 4-speed gearbox in the engine block controlled by a foot gearchange and features a chain final drive. The double tubular frame includes a sidecar adapter and the front suspension has twin swinging leading link forks with a shock absorber and steering damper. The rear suspension is a swinging fork adjustable for load and road conditions. The Adler MB 250 RS uses 3.25 x 16 inch tires and has drum brakes, 180 mm in diameter on both the front and back.


Technical specifications:

Make Model: Adler MB 250 RS

Year: 1953
Engine: 2 cylinder, 2 stroke, flat-crowned pistons
Capacity: 247 cc / 15.1 cub in.
Bore x Stroke: 54 x 54 mm
Cooling: Air cooled
Lubrication: Petrol oil mix 25:1
Clutch: Multi plate
Starting: Kick start
Battery: 6V, 6Ah
Ignition: Bosch coil
Carburetor: Twin Bing carburetors
Exhaust System: Twin, steel, chrome
Max Power: 19.2 kW / 26 hp @ 7500 rpm
Compression Ratio: 1: 5.75
Clutch: Multi disc
Transmission: 4 Speed gearbox housed in engine block, foot gearchange
Final Drive: Chain
Frame: Double tubular frame with sidecar adapter.
Front suspension: Twin swinging leading link forks with shock absorber and steering damper
Rear suspension: Swinging fork adjustable for load and road conditions
Tyres (front and back): 3.25 x 16 in.
Brakes (front and back): Drums, 180 mm diameter

The post Adler MB 250 RS (1953) appeared first on MotorcycleSpecifications.com.

]]>
Vespa 125 Utilitaria (1953) https://motorcyclespecifications.com/vespa-125-utilitaria-1953-specs/ Mon, 03 Apr 2023 03:20:12 +0000 https://motorcyclespecifications.com/?p=42481 The Vespa 125 U manufactured in 1953 had a two stroke, single cylinder engine with a capacity of 124.8 cc. With only 7,000 units produced, it had a Dell’Orto TA

The post Vespa 125 Utilitaria (1953) appeared first on MotorcycleSpecifications.com.

]]>
The Vespa 125 U manufactured in 1953 had a two stroke, single cylinder engine with a capacity of 124.8 cc. With only 7,000 units produced, it had a Dell’Orto TA 17B carburetor and a compression ratio of 6.4:1. It was air-cooled, forced and had a fuel mixture of 1:20. It was powered by a flywheel magneto ignition system and kick start. Its clutch was a wet, multiplate type with a top speed of 65km/hr or 40mph. It was a pressed sheet steel frame, streamlined monocoque structured motorcycle with a variable flexible coil spring for the front suspension and double hydraulic shock absorbers for the rear suspension. The front and rear brakes were both drums measuring 124mm and 126mm respectively with interchangeable wheel sizes of 3.5×8″. The Vespa 125 U had a length of 1680mm or 66.1in, width of 790mm or 31.1in and a height of 1170mm or 46.4in. The wheelbase and seat height were 1160mm or 45.7in and 775mm or 30.5in respectively. It weighed 78kg or 172lbs with a fuel capacity of 6.25L or 1.65 US gal. It consumed 2L/100km, which is equivalent to 118 US miles per gallon. It was available in the color pastel green.


Technical specifications:

Make Model: Vespa 125 U

Year: 1953
Production: 7 000 units
Engine: Two stroke, single cylinder
Capacity: 124.8 cc 7.6 cub in
Bore x Stroke: 56.5 x 49.8 mm
Carburetor: Dell,Orto TA 17B
Compression Ratio: 6.4:1
Cooling: Air cooled, forced
Fuel Mixture: 1:20
Ignition: Flywheel, magneto
Starting: Kick start
Battery: 6V AC
Clutch: Wet, multiplate
Max Power: 3.3 kW / 4.5 hp @ 5800 rpm
Transmission: 3 speed
Final Drive: Direct drive
Frame: Pressed sheet steel, streamlined monocoque structure
Front Suspension: Variable flexible coil spring
Rear Suspension: Double hydraulic shock absorbers
Front Brakes: 124 mm drum
Rear Brakes: 126 mm drum
Wheels: Interchangeable
Front Tyre: 3.5 x 8″
Rear Tyre: 3.5 x 8″
Dimensions: Length: 1680 mm / 66.1 in Width: 790 mm / 31.1 in Height: 1170 mm / 46.4 in
Wheelbase: 1160 mm / 45.7 in
Seat height: 775 mm / 30.5 in
Dry Weight: 78 kg / 172 lbs
Fuel Capacity: 6.25 L / 1.65 US gal
Consumption average: 2 L/100 km / 50 km/l / 118 US mpg
Top Speed: 65 km/h / 40 mph
Colours: Pastel Green
Sources: Vespaclubtress.jimdo.com

The post Vespa 125 Utilitaria (1953) appeared first on MotorcycleSpecifications.com.

]]>