Suzuki RM250 Paul Edmondson Replica (2007)

The Suzuki RM250 Paul Edmondson Replica is a limited edition motorcycle, with only 50 units produced in 2007. It has a two-stroke, single cylinder engine with a capacity of 249cc and a compression ratio of 10.7:1 (ex valve closed). The bike has a liquid-cooled cooling system and Keihin PWK38PWJ/TPS induction, with an electronic CDI ignition and kick starting mechanism. The transmission is a 5-speed manual, and the final drive is a chain. The front and rear suspension are both Kayaba inverted cartridge and link-type respectively, and the bike has high-quality brakes with a single 250mm disc and two-piston caliper at the front and a single 240mm disc and one-piston caliper at the rear. The front tyre is 100/90-21, and the rear tyre is 110/90-18. The seat height is 965mm, and the fuel capacity is 8 litres. The bike has received positive reviews from MCN, Easier.com, and Motocorse.


Technical specifications:

Make Model: Suzuki RM250 Paul Edmondson Replica

Year: 2007


Production: 50 Units
Engine: Two stroke, single cylinder
Capacity: 249 cc / 15.2 cu in
Bore x Stroke: 66.4 x 72.0 mm
Compression Ratio: 10.7:1 (ex valve closed), 8.9:1 (ex valve open)
Cooling System: Liquid cooled
Induction: Keihin PWK38PWJ/TPS
Ignition: Electronic CDI
Starting: Kick
Transmission: 5 Speed
Final Drive: Chain
Clutch: Wet, multi-plate
Front Suspension: Kayaba inverted cartridge, 18 step rebound, 20-step compression damping adjustable
Front Wheel Travel: 300 mm / 11.8 in
Rear Suspension: Kayaba link-type, 18-step rebound, 3-turn high, 16-step low speed compression damping, preload adjustable

Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single 250 mm disc, 2 piston caliper
Rear Brakes: Single 240mm disc, 1 piston caliper
Front Tyre: 100/90 -21
Rear Tyre: 110/90 -18
Seat Height: 965 mm / 38 in
Fuel Capacity: 8.0 litres / 2.1 US gal / 1.8 Imp gal
Reviews: MCN / Easier.com / Motocorse

Related models: