Harley Davidson Road King Special (2019)

Posted on by

The Harley Davidson FLHR Road King Special is a motorcycle model from 2019 with a four-stroke V-twin Milwaukee-Eight 114 engine, 1868cc capacity, and 4 valves per cylinder. It has an air-cooled cooling system, 10.5:1 compression ratio, and electronic sequential port fuel injection. It has a hydraulically actuated 9 plate wet, assist and slip clutch, and a 6-speed transmission with belt final drive and chain primary drive. The lean angle is 32 degrees on both sides, and the frame is made of mild steel with a tubular design. The swingarm is also made of mild steel with a drawn and welded section. The front suspension has 49mm forks with dual bending valve and 117mm of travel, while the rear suspension has premium low height hand-adjustable rear shocks with 54.6mm of travel. It has dual front brakes with 300mm disc and 4-piston fixed caliper type, as well as a single rear brake with 300mm disc and 4-piston fixed caliper type. ABS is standard, and the wheels are turbine cast aluminum in black. The front tire is 130/60B19 61H and the rear tire is 180/55B18 80H.

Technical specifications:

Make Model: Harley Davidson FLHR Road King Special

Year: 2019


Engine: Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1868 cc / 114 cu in
Bore x Stroke: 102 x 114 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Exhaust: Black, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 167 Nm / 122 lb-ft @ 3250 rpm
Clutch: Hydraulically actuated 9 plate wet, Assist & Slip
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio

Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875
Lean Angle, Right: 32 degrees
Lean Angle, Left: 32 degrees
Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Front Suspension: 49 mm forks, Dual Bending Valve
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Premium low height hand-adjustable rear shocks
Rear Wheel Travel: 54.6 mm / 2.15 in
Front Brakes: 2 x 300 mm disc, caliper type 32 mm, 4-piston fixed, dual floating rotors
Rear Brakes: Single 300 mm, caliper type 32 mm, 4-piston, fixed rotor
ABS: Standard
Wheels: Black, Turbine Cast Aluminium
Front Wheel: Black, Turbine Cast Aluminum
Rear Wheel: Black, Turbine Cast Aluminum
Front Tyre: 130/60B19 61H
Rear Tyre: 180/55B18 80H

Related models: