Harley Davidson FLHR Road King (2017-18)

The Harley Davidson FLHR Road King motorcycle is a 2017-18 model with a four stroke, V-Twin, Milwaukee-Eight 107 engine. It has a capacity of 1746 cc, with a bore and stroke of 100 x 111 mm. The motorcycle is air-cooled with a compression ratio of 10.0:1 and features a chrome, 2-1-2 dual exhaust with tapered mufflers. It utilizes electronic sequential port fuel injection and has a hydraulically actuated 9 plate wet, assist and slip clutch transmission. The bike has a maximum torque of 151 Nm at 3250 rpm and a lean angle of 32 degrees on both sides. The frame is made of mild steel and has a tubular frame, twin downtubes, and a bolt-on rear frame while the swingarm is made of mild steel with two-piece drawn and welded section. It has a front suspension of 49 mm forks with dual bending valve and a rear suspension of premium low height hand-adjustable rear shocks. The front brakes come with dual floating rotors while the rear brakes are fixed. ABS is standard and the bike rolls on black, turbine cast aluminum wheels. The front tire is a BW 130/80B17 65H while the rear tire is a BW 180/65B16 81H.


Technical specifications:

Make Model: Harley Davidson FLHR Road King

Year: 2017 – 18


Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1746 cc / 107 cub in.
Bore x Stroke: 100 x 111 mm / 3.937 x 4.374 in
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Chrome, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 151 Nm / 111.4 ft/lb @ 3250 rpm
Clutch: Hydraulically actuated 9 plate wet, Assist & Slip
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio

Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875
Lean Angle, Right: 32 degrees
Lean Angle, Left: 32 degrees
Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Front Suspension: 49 mm forks, Dual Bending Valve
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Premium low height hand-adjustable rear shocks
Rear Wheel Travel: 54.6 mm / 2.15 in
Front Brakes: 2 x 300 mm disc, caliper type 32 mm, 4-piston fixed, dual floating rotors
Rear Brakes: Single 300 mm, caliper type 32 mm, 4-piston, fixed rotor
ABS: Standard
Wheels: Black, Turbine Cast Aluminium
Front Wheel: 9 Impeller Cast Aluminum
Rear Wheel: Impeller Cast Aluminum
Front Tyre: BW 130/80B17 65H
Rear Tyre: BW 180/65B16 81H

Related models: