Victory Kingpin (2008)

Posted on by

The Victory Kingpin 8 Ball motorcycle was produced in 2008 and has a four-stroke, 50-degree V twin SOHC engine with a capacity of 1634 cc. It has a compression ratio of 9.8:1 and uses electronic fuel injection with 44mm throttle bodies. The clutch is a wet, multi-plate, and the transmission has six speeds. The final drive is a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage. The bike has a single 300mm floating rotor 4 piston caliper for the front brakes and a single 300mm floating rotor 2 piston caliper for the rear brakes. The front tire is 130/70-21, and the rear tire is 180/55 B18. The seat height is 673 mm, and the dry weight is 304 kg. The fuel capacity is 17 liters, and the GVWR is 549 kg.

Technical specifications:

Make Model: Victory Kingpin 8 Ball

Year: 2008


Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in

Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 304 kg / 670 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

Related models: