Victory Cross Country (2011-12)

Geschrieben auf von

The Victory Cross Country Cory Ness motorcycle was manufactured between 2011 and 2012. It has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder, self-adjusting cam chains, and hydraulic lifters. The engine has a capacity of 1731 cc or 105.6 cu-in with a bore x stroke of 101 x 108 mm. The cooling system is air/oil cooled, and the compression ratio is 9.8:1. The motorcycle has electronic fuel injection with 45mm throttle bodies and digital ignition. The starting system is electric. The exhaust is split dual with a crossover, and the clutch is wet and multi-plate. It has a 6-speed transmission and a final drive of carbon fiber reinforced belt. The front suspension has a 43mm inverted cartridge telescopic fork with 130mm wheel travel, while the rear suspension is a single, mono-tube gas forged, and cast aluminum w/ rising-rate linkage with 120mm wheel travel and a preload adjustable spring. The front brakes have 2x 300mm floating rotors with a 3-piston caliper, and the rear brake has a single 300mm floating rotor with a 2-piston caliper. The front tire size is 130/70 R18, and the rear is 180/60 R16. The seat height is 667mm or 26.25 inches. The GVWR of the motorcycle is 618kg or 1360lbs, and the dry weight is 347kg or 765lbs. The fuel capacity is 22.7 liters or 5.8 US gallons.

Technische Daten:

Make Model: Victory Cross Country Cory Ness

Jahr: 2011 - 12


Motor: Viertakt, 50 Grad V-Twin SOHC, 4 Ventile pro Zylinder, selbsteinstellende Steuerketten, hydraulische Stößel
Capacity: 1731 cc / 105.6 cu-in
Bohrung x Hub: 101 x 108 mm
Kühlsystem: Luft-/ölgekühlt
Verdichtungsverhältnis: 9,8:1
Ansaugung: Elektronische Kraftstoffeinspritzung mit 45-mm-Drosselklappenstutzen
Zündung: Digital
Anfahren: Elektrisch
Auspuff: Geteilter Doppelauspuff mit Frequenzweiche
Kupplung: Nass, Lamellenkupplung
Getriebe: 6-Gang
Endantrieb: Kohlefaser-verstärkter Riemen
Vordere Federung: 43-mm-Teleskopgabel mit invertierter Kartusche, 130 mm Radweg
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 120mm wheel travel, preload adjustable spring
Bremsen vorne: 2x 300mm Schwimmerrotor 3-Kolben-Bremssattel

Hintere Bremsen: Einzelne 300-mm-Schwimmkörper 2-Kolben-Bremssattel
Bereifung vorne: 130/70 R18
Hintere Bereifung: 180/60 R16
Seat Height: 667 mm / 26.25 in
GVWR: 618 kg / 1360 lbs
Trockengewicht: 347 kg / 765 lbs
Fuel Capacity: 22.7 Litres / 5.8 us gal

Verwandte Modelle: