Husqvarna TE 450 (2011-12)

Geschrieben auf von

The Husqvarna TE 450 is a motorcycle model that was produced between 2011-12. It has a four-stroke, single-cylinder engine with a capacity of 449cc, a compression ratio of 12.0:1, and electronic fuel injection. The ignition is CDI electronic with digital advance control, and the motorcycle can be started using both electric and kick start. Its transmission is six-speed with a chain final drive, and has a wet, multiplate type clutch with hydraulic control. The frame is made of double beam and double cradle high resistance Cr/Mo steel, with a light alloy rear frame. It has a 48mm upside-down telescopic hydraulic fork for the front suspension and a KAYABA progressive link with a single hydraulic shock absorber, spring preload adjustment, compression (high and low speed), and rebound adjustment for the rear. The front and rear brakes are single discs with hydraulic control and floating pistons. The front tire is 90/90-21 and the rear is 140/80-18, with a 25.8-degree rake and a 101mm trail. The wheelbase is 1480mm and the seat height is 963mm. The motorcycle has a wet weight of 113kg and a fuel capacity of 9.2 litres.

Technische Daten:

Make Model: Husqvarna TE 449

Jahr: 2011 - 12


Motor: Viertakt, Einzylinder, DOHC, 4 Ventile
Hubraum: 449 ccm / 27,4 cu-in
Bore x Stroke: 97 x 60.7 mm
Kühlsystem: Flüssigkeitsgekühlt
Verdichtungsverhältnis: 12,0:1
Exhaust: Full stainless steel system (silencer and pipes)
Einspritzung: Elektronische Kraftstoffeinspritzung
Ignition: CDI electronic with digital advance control.
Starten: Elektrisch & Kick
Spark plug type: NGK” CR 9EKB
Spark plug gap: 0,7 mm
Maximale Leistung:
Max. Drehmoment:
Getriebe: 6-Gang
Endantrieb: Kette

Gear Ratio: 1st 2.286 (32/14) 2nd 1.875 (30/16) 3rd 1.533 (23/15) 4th 1.250 (25/20) 5th 1.043 (24/23) 6th 0.917 (22/24)
Kupplung: Nass, Mehrscheibenkupplung, hydraulisch betätigt
Frame: Double beam and double cradle high resistance Cr/Mo steel (round and elliptical section); Light alloy rear frame
Front Suspension: 48mm Upside-Down” telescopic hydraulic fork with advanced axle; compression and rebound stroke adjustment
Front Wheel Travel: 96 mm / 11.7 in
Rear Suspension: .”KAYABA” Progressive link with single hydraulic shock absorber; spring preload adjustment, compression (high and low speed) and rebound adjustment
Hinterradfederweg: 296 mm / 11.7 in
Front Brakes: Single 260mm disc, Fixed disc, “Wave” type, with hydraulic control and double ~A24 piston floating caliper
Rear Brakes: Single 240mm disc, Fixed disc, “Wave” type, with hydraulic control and floating ~A26 piston caliper
Reifen vorne: 90/90-21
Hinterreifen: 140/80-18
Rechen: 25,8 Grad
Trail: 101 mm / 3.98 in
Radstand: 1480 mm / 58.3 in
Sitzhöhe: 963 mm / 37.9 in
Wet Weight: 113 kg / 249.1 lbs
Kraftstoffkapazität: 9,2 Liter / 2,4 US gal

Verwandte Modelle: