Husqvarna TE 410 (1996-99)

The Husqvarna TE 410 motorcycle was produced from 1996-99 and featured a four stroke, single cylinder, SOHC, 4 valve engine with a capacity of 399 cc. It had a liquid cooling system, compression ratio of 11.4:1, and a 36mm Dell Orto carburetor for induction. The bike had a digital CDI for ignition and could be started with a kick. It had a maximum power output of 34 hp at 7000 rpm and max torque of 40.6 Nm at 5150 rpm. The transmission had 6 speeds and the final drive was chain-operated. The front suspension consisted of telescopic forks with 305mm wheel travel, while the rear suspension was a monoshock with 320mm wheel travel. The front brakes were a single 260mm disc and the rear brakes were a single 220mm disc. The front and rear tires were 90/90 -21 and 140/80 -18, respectively. The bike weighed 125 kg and had a fuel capacity of 9.1 liters.


Technische Daten:

Make Model: Husqvarna TE 410

Jahr: 1996 - 99


Motor: Viertakt, Einzylinder, SOHC, 4 Ventile
Hubraum: 399 cm³ / 24,3 cu-in
Bohrung x Hub: 91,5 x 60,8 mm
Kühlsystem: Flüssigkeitsgekühlt
Verdichtungsverhältnis: 11,4:1
Ansaugung: 36mm Dell Orto Vergaser
Zündung: Digital CDI
Start: Kick
Maximale Leistung: 34 PS / 24,8 kW bei 7000 U/min
Maximales Drehmoment: 40,6 Nm / 30 lb-ft @ 5150 U/min
Getriebe: 6-Gang
Endantrieb: Kette
Front Suspension: Telescopic forks, 305mm wheel travel.
Rear Suspension: Monoshock, 320mm wheel travel
Vordere Bremsen: Einzelne 260-mm-Scheibe

Hintere Bremsen: Einzelne 220-mm-Scheibe
Reifen vorne: 90/90 -21
Hinterreifen: 140/80 -18
Trockengewicht: 125 kg / 275.5 lbs
Fuel Capacity: 9.1 Litres / 2.4 US gal

Verwandte Modelle: