Husaberg FE 650e (2007-08)

Geschrieben auf von

The Husaberg FE 650e Enduro motorcycle was produced from 2007 to 2008. It features a liquid-cooled four-stroke single-cylinder SOHC engine with a capacity of 644cc, producing an unknown maximum power and torque. The engine uses a Keihin CVR 32 induction system and pressure circulation with trochoit oil pump lubrication. The ignition is a Kokusan digital system and it can be started using both electric and kick methods. The clutch is a wet multi-disc clutch operated hydraulically, while the transmission has six speeds and the final drive is a chain. The frame is made of 25CrMo4 tempered steel and the front suspension is a WP USD 4860 MA Husaberg enduro system, while the rear suspension is a WP PDS 5018 MCC Husaberg enduro. The front brake is a single 260mm disc and the rear brake is a single 220mm disc. The motorcycle uses a 90/90 -21 front tire and a 140/80 -18 rear tire. It has a wheelbase of 1490mm and a seat height of 950mm. Its dry weight is 110kg and it has a fuel capacity of 10.5 liters or 2.7 US gallons.

Technische Daten:

Make Model: Husaberg FE 650e Enduro

Jahr: 2007 - 08


Motor: Viertakt, Einzylinder, SOHC, 4 Ventile
Hubraum: 644 cm³ / 39,6 cu-in
Bohrung x Hub: 100 x 82 mm
Kühlsystem: Flüssigkeitsgekühlt
Verdichtungsverhältnis: 12,2:1
Induction: Keihin CVR 32
Schmierung: Druckumlauf, Trochoit-Ölpumpe
Zündung: Kokusan digital
Starten: Elektrisch & Kick
Maximale Leistung: NA
Max. Drehmoment: NA
Kupplung: Nasse Mehrscheibenkupplung, hydraulisch betätigt
Getriebe: 6-Gang
Endantrieb: Kette
Frame: 25CrMo4 tempered

Front Suspension: WP USD 4860 MA Husaberg enduro
Rear Suspension: WP PDS 5018 MCC Husaberg enduro
Vordere Bremsen: Einzelne 260-mm-Scheibe
Hintere Bremsen: Einzelne 220-mm-Scheibe
Reifen vorne: 90/90 -21
Hinterreifen: 140/80 -18
Radstand: 1490 mm / 58.7 in
Seat Height: 950 mm / 37.4 in
Dry Weight: 110 kg / 240.3 lbs
Kraftstoffkapazität: 10,5 Liter / 2,7 US gal

Verwandte Modelle: