Honda CX 650 Custom (1979-83)

The Honda CX 650 Custom motorcycle was produced from 1979 to 1983. It had a four-stroke longitudinal 800 V-twin cylinder engine with a camshaft nestled at the base of the V between the cylinders. The engine was OHV and had four valves per cylinder, which were operated by pushrods. The bike had a capacity of 673 cc and a bore x stroke of 82.5 x 63 mm. It had a liquid cooling system and a compression ratio of 9.8:1. The induction system consisted of 2x 39mm Keihin carburetors and the ignition was CDI. The bike had a maximum power output of 64 hp at 8000 rpm and a maximum torque of 61 Nm at 6500 rpm. The transmission was five-speed and the final drive was via a shaft. The front suspension featured 39 mm air-adjustable forks with a leading axle, and the rear suspension consisted of dual shocks with adjustable spring preload. The front brake was a single disc and the rear brake was a drum. The front and rear tires were 100/90-18 and 120/90-18, respectively. The wet weight of the bike was 215 kg, and the fuel capacity was 12.5 liters.

Technische Daten:

Make Model: Honda CX 650 Custom

Year: 1979-83

Motor: Viertakt, längsgerichteter 800er V-Zweizylinder, Nockenwelle liegt an der Basis des V zwischen den Zylindern. ,OHV, 4 Ventile pro Zylinder, die durch Stößelstangen betätigt werden.
Capacity: 673 cc / 41.07 cu-in
Bore x Stroke: 82.5 x 63 mm
Kühlsystem: Flüssigkeitsgekühlt
Verdichtungsverhältnis: 9,8:1
Induction: 2x 39mm Keihin
Zündung: CDI
Anfahren: Elektrisch
Max Power: 64 hp / 47.7 kW @ 8000 rpm
Max Torque: 61 Nm / 45 lb-ft @ 6500 rpm
Getriebe: 5-Gang
Endantrieb: Welle
Front Suspension: 39mm Air adjustable forks leading axle
Rear Suspension: Dual shocks adjustable spring preload
Vordere Bremsen: Einzelne Scheibe

Hintere Bremsen: Trommel
Reifen vorne: 100/90-18
Hinterreifen: 120/90-18
Nassgewicht: 215 kg / 474 lbs
Kraftstoffkapazität: 12,5 Liter / 3,3 US gal

Verwandte Modelle: