Honda CBR250R (1988-89)

Geschrieben auf von

The Honda CBR250R was a motorcycle model produced in 1988-89. It featured a four stroke, transverse four cylinder engine, with a 249cc capacity, and a liquid cooling system. The bike had a compression ratio of 11.5:1, and was equipped with a carburetor and CDI ignition. The motorcycle had an electric start, and was capable of producing up to 40 horsepower at 14500 rpm, and a maximum torque of 23.5 Nm at 11500 rpm. The clutch was a wet multi-plate coil spring, and the transmission was a six-speed. The bike sported Telescopic forks for its front suspension, and pro-link swing arm for its rear suspension. The brakes were hydraulic discs (two for the front, one for the rear), and the front tire had a size of 100/70-17, while the rear tire measured 130/70-17. The Honda CBR250R had a wheelbase of 1380mm (54.3in), and a seat height of 750mm (29.5in). The motorcycle weighed around 153kg (337lbs), and had a fuel capacity of 14 litres (3.6 US gal). According to Motosprint, a road test was performed on the Honda CBR250R.

Technische Daten:

Make Model: Honda CBR 250R

Jahr: 1988 - 89


Motor: Viertakt, querliegender Vierzylinder, DOHC, 4 Ventile pro Zylinder.
Hubraum: 249 ccm / 15,2 cu-in
Bore x Stroke: 48.5 x 33.8 mm
Kühlsystem: Flüssigkeitsgekühlt
Verdichtungsverhältnis: 11,5:1
Ansaugung: Vergaser
Zündung: CDI
Anfahren: Elektrisch
Max Power: 40 hp / 29.2 kW @ 14500 rpm
Max Torque: 23.5 Nm @ 11500 rpm
Kupplung: Nasse Mehrscheiben-Schraubenfeder
Getriebe: 6-Gang
Endantrieb: Kette
Vordere Federung: Teleskopgabel
Rear Suspension: Pro-link. swing arm

Front Brakes: 2x Hydraulic discs
Rear Brakes: Single hydraulic disc
Front Tyre: 100/70 -17
Hinterreifen: 130/70-17
Radstand: 1380 mm / 54.3 in
Sitzhöhe: 750 mm / 29.5 in
Trockengewicht: 153 kg / 337 lbs
Kraftstoffkapazität: 14 Liter / 3.6 US gal
Straßen-Test: Motosprint

Verwandte Modelle: