Harley Davidson Dyna Low Rider (2016-17)

Posted on by

The Harley Davidson Dyna Low Rider motorcycle was produced between 2016 and 2017. It features a Four stroke, V-Twin, Twin Cam 103 c engine with a capacity of 1690 cc / 103.1 cu in. The bike is air-cooled and has a compression ratio of 9.6:1. It has Electronic Sequential Port Fuel Injection (ESPFI) and a Single-fire, non-wasted, map-controlled spark ignition. The maximum torque of the bike is 126 Nm / 112.8 kgf-m / 92.9 ft-lb at 3500rpm. The motorcycle has a 6-speed transmission and a belt final drive with a chain, 34/46 ratio primary drive. The frame is made of mild steel, tubular and has a rectangular section backbone. The Lean Angle, Left is 30.5o and Lean Angle, Right is 29.5o. The bike has a 49 mm front suspension with polished aluminum fork triple clamp and dual-rate springs and a coil-over shock rear suspension. The front brakes of the bike consist of a single 300 mm disc, 4 piston fixed caliper and the rear brakes have a single 292 mm disc, 2 piston torque-free floating caliper. The front and rear wheels of the bike are chrome, steel laced and have optional black, split 5-spoke cast aluminum. The front tire is 100/90B19 57H and the rear tire is 160/70B17 73V. The rake of the bike is 30.5 degrees and the trail is 128 mm / 5.1 in. The dimensions of the bike are Length 2345 mm / 92.3 in.

Technical specifications:

Make Model: Harley Davidson Dyna Low Rider

Year: 2016 – 17


Engine: Four stroke, V-Twin, Twin Cam 103 c with integrated oil cooler
Capacity: 1690 cc / 103.1 cu in
Bore x Stroke: 98.4 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Exhaust: 2-into-1 Exhaust with a deep rumble
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 126 Nm / 112.8 kgf-m / 92.9 ft-lb @ 3500 rpm
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790:1
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded

Lean Angle, Left: 30.5o
Lean Angle, Right: 29.5o
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: Single 300 mm disc, 4 piston fixed caliper
Rear Brakes: Single 292 mm disc, 2 piston torque free floatingcaliper
Front Wheel: Chrome, steel laced ( optional: Black, split 5-spoke cast aluminium)
Rear Wheel: Chrome, steel laced ( optional: Black, split 5-spoke cast aluminium)
Front Tyre: 100/90B19 57H
Rear Tyre: 160/70B17 73V
Rake: 30.5 degrees
Trail: 128 mm / 5.1 in
Dimensions: Length 2345 mm / 92.3 in.

Related models: