Derbi Senda SM 125 4T (1999-03)

The Derbi Senda SM 125 4T, produced between 1999 and 2003, is a motorcycle powered by a four-stroke, single-cylinder OHC engine with a capacity of 124cc. It has a compression ratio of 11.0:1, electronic ignition, and a 22mm Keihin induction system. The bike’s maximum power output is 9 kW or 12 hp at 6500 rpm, and the maximum torque is 9 Nm or 6.6 lb-ft at 6500 rpm. The Senda SM 125 4T has a multiplate clutch and a five-speed transmission with a chain final drive. Paoli forks with a diameter of 41mm are used for the front suspension, providing 195mm or 7.6 inches of travel, while a Paoli monoshock is used for the rear suspension, offering 170mm or 6.7 inches of travel. The front and rear brakes are equipped with single 300mm and 220mm discs, respectively. The bike’s front and rear tires are 110/80-17 and 130/70-17, respectively, with a seat height of 830mm or 32.7 inches. The motorcycle has a dry weight of 116 kg or 255.7 lbs and can carry 7.5 liters or 2.0 US gallons of fuel.


Technical specifications:

Make Model: Derbi Senda SM 125 4T

Year: 1999-03


Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Paoli forks
Front Wheel Travel: 195 mm / 7.6 in

Rear Suspension: Paoli monoshock
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: Single 300mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 110/80 -17
Rear Tyre: 130/70 -17
Seat Height: 830 mm / 32.7 in
Dry Weight: 116 kg / 255.7 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal

Related models: