Derbi Senda SM 125 4T (1999-03)

The Derbi Senda SM 125 4T, produced between 1999 and 2003, is a motorcycle powered by a four-stroke, single-cylinder OHC engine with a capacity of 124cc. It has a compression ratio of 11.0:1, electronic ignition, and a 22mm Keihin induction system. The bike’s maximum power output is 9 kW or 12 hp at 6500 rpm, and the maximum torque is 9 Nm or 6.6 lb-ft at 6500 rpm. The Senda SM 125 4T has a multiplate clutch and a five-speed transmission with a chain final drive. Paoli forks with a diameter of 41mm are used for the front suspension, providing 195mm or 7.6 inches of travel, while a Paoli monoshock is used for the rear suspension, offering 170mm or 6.7 inches of travel. The front and rear brakes are equipped with single 300mm and 220mm discs, respectively. The bike’s front and rear tires are 110/80-17 and 130/70-17, respectively, with a seat height of 830mm or 32.7 inches. The motorcycle has a dry weight of 116 kg or 255.7 lbs and can carry 7.5 liters or 2.0 US gallons of fuel.

Technische Daten:

Marke Modell: Derbi Senda SM 125 4T

Jahr: 1999-03

Motor: Viertakt, Einzylinder. OHC
Hubraum: 124 cm³ / 7,6 cu-in
Bohrung x Hub: 56 x 49 mm
Kühlsystem: Luftgekühlt
Verdichtungsverhältnis: 11,0:1
Ansaugung: 22mm Keihin
Zündung: Elektronisch
Anfahren: Elektrisch
Max Leistung: 9 kW / 12 PS bei 6500 U/min
Maximales Drehmoment: 9 Nm / 6.6 lb-ft @ 6500 U/min
Kupplung: Mehrscheibenkupplung
Getriebe: 5-Gang
Endantrieb: Kette
Vordere Federung: 41mm Paoli-Gabeln
Federweg Vorderrad: 195 mm / 7.6 in

Hintere Aufhängung: Paoli Monoshock
Hinterradfederweg: 170 mm / 6.7 in
Vordere Bremsen: Einzelne 300-mm-Scheibe
Hintere Bremsen: Einzelne 220-mm-Scheibe
Reifen vorne: 110/80 -17
Hinterreifen: 130/70 -17
Sitzhöhe: 830 mm / 32.7 in
Trockengewicht: 116 kg / 255.7 lbs
Kraftstoffkapazität: 7,5 Liter / 2,0 US gal

Verwandte Modelle: