CR&S DUU Alegher (2014)

The CR&S Duu Alegher 2014 is a motorcycle with a powerful S & S X-Wedge, four-stroke, 56 degrees V-twin engine. The bike’s engine capacity is 1917 cc or 117 cu-in with a compression ratio of 9.75:1. It has air cooling and dry sump lubrication, and its induction is injection with a single injector per cylinder and a 55 mm throttle body. The motorcycle has an electric starting system and a wet multiplate clutch with hydraulic control. It also has 5 or 6 transmission speed options with a chain double oil bath primary drive and a chain with “O” ring final drive. The motorcycle’s frame is made of stainless steel and light alloy and has a single-arm pipe section swingarm with a significant box-truss made of stainless steel. It has adjustable rebound and preload 48 mm upside-down front fork suspension with 120 mm travel and swingarm with monoshock teleidraulico, progressive, adjustable rebound and preload with 128 mm travel rear suspension. The front and rear brakes are 2x 320mm floating disc and single 260mm disc, respectively, with 2 piston calipers. The bike has a 3.50 x 17″ front wheel and a 6.00 x 17″ rear wheel with 120/70 ZR17 and 190/55-ZR17 front and rear tires.


Technische Daten:

Make Model: CR&S Duu Alegher

Engine: S & S X-Wedge, four stoke, 56 degrees V-Twin, 2 Valves per cylinder


Capacity: 1917 cc / 117 cu-in
Bore x Stroke: 1104.8 x 111.1 mm
Kühlsystem: Luftgekühlt
Compression Ratio: 9.75:1
Schmierung: Trockensumpf
Induction: Injection, single injector per cylinder, 55 mm throttle body
Anfahren: Elektrisch
Kupplung: Nasslamellenkupplung mit hydraulischer Steuerung
Transmission: 5 or 6 Speed (6-speed option)
Primary Drive: Chain double oil bath
Final Drive: Chain with “O” ring
Frame: Main frame tube relevant section stainless steel cradle and slide motor boxed stainless steel frame and box-seat carrier light alloy. Collagamento plates are made of light alloy
Swingarm: Single arm, pipe section with significant box-truss, stainless steel.
Front Suspension: 48 mm Upside down fork adjustable rebound and preload
Federweg Vorderrad: 120 mm / 4.7 in

Rear Suspension: Swingarm with monoshock teleidraulico, progressive, adjustable rebound and preload.
Hinterradfederweg: 128 mm / 5.0 in
Front Brakes: 2x 320mm floating disc, 2 piston calipers
Hintere Bremsen: Einzelne 260-mm-Scheibe, 2-Kolben-Bremssattel
Front Wheel: 3.50 x 17 ”
Rear Wheel: 6.00 x 17 ”
Vordere Bereifung: 120/70 ZR17
Hintere Bereifung: 190/55-ZR17

Verwandte Modelle: