Aprilia Pegaso 650 Strada (2005-06)

Geschrieben auf von

The Aprilia Pegaso 650 Strada is a motorcycle produced from 2005-06 with a four-stroke, single cylinder, SOHC, 4-valve engine and a capacity of 659 cc. It has a bore x stroke of 100 x 84 mm, a compression ratio of 10.0:1, and a liquid cooling system that meets Euro 3 emission standards. The bike is fitted with electronic fuel injection and uses a 44mm throttle body, while the ignition is digital and starting is electric. The maximum power output is 36.4 kW / 48 hp at 6250 rpm, with a maximum torque rating of 61.3 Nm / 6.25 kgf-m / 45.2 lb-ft at 5200 rpm. The bike uses a multi-plate clutch and a 5-speed transmission, with a chain final drive. The frame is made of steel and has an open cradle, single spar design. The front suspension is a 45 mm Marzocchi telescopic fork with 140 mm / 5.5 in of wheel travel, while the high-strength steel swingarm rear suspension uses Aprilia’s Progressive System (APS) rising rate linkages and a Sachs hydraulic monoshock with adjustable rebound and preload. The rear wheel travel is 130 mm / 5.1 in. The front brakes consist of a single 300 mm disc and a 2 piston caliper, while the rear brakes use a single 240 mm disc and a 1 piston caliper.

Technische Daten:

Marke Modell: Aprilia Pegaso 650 Strada

Jahr: 2005 - 06


Motor: Viertakt, Einzylinder, SOHC, 4 Ventile
Hubraum: 659 cm³ / 40,2 Zoll
Bohrung x Hub: 100 x 84 mm
Verdichtungsverhältnis: 10,0:1
Kühlsystem: Flüssigkeitsgekühlt
Abgasnorm: Euro 3
Ansaugung: Elektronische Kraftstoffeinspritzung. ~A44mm Drosselklappe
Zündung: Digital
Anfahren: Elektrisch
Maximale Leistung: 36,4 kW / 48 PS bei 6250 U/min
Maximales Drehmoment: 61,3 Nm / 6,25 kgf-m / 45,2 lb-ft @ 5200 U/min
Kupplung: Lamellenkupplung im Ölbad
Getriebe: 5-Gang
Endantrieb: Kette
Rahmen: Stahl, offenes Gestell, einholmiger Rahmen

Vorderradaufhängung: ~A45 mm Marzocchi Teleskopgabel
Federweg Vorderrad: 140 mm / 5.5 in
Hintere Aufhängung: Hochfeste Stahlschwinge. Aprilia Progressive System (APS) mit ansteigender Anlenkung. Hydraulisches Sachs Monofederbein mit einstellbarer Zugstufe und Vorspannung.
Hinterradfederweg: 130 mm / 5.1 in
Front Brakes: Single ~A300 mm disc, 2 piston caliper
Hintere Bremsen: Einzelne ~A240 mm Scheibe, 1 Kolbenzange

Verwandte Modelle: